ASoC: rt5640: Remove is_sys_clk_from_pll, it has ordering issues
authorHans de Goede <hdegoede@redhat.com>
Tue, 8 May 2018 15:35:46 +0000 (17:35 +0200)
committerMark Brown <broonie@kernel.org>
Fri, 11 May 2018 02:21:42 +0000 (11:21 +0900)
is_sys_clk_from_pll() is used as a snd_soc_dapm_route.connected callback,
checking RT5640_GBL_CLK to determine if the sys-clk is PLL1 and thus the
PWR_PLL bit in reg PWR_ANLG2 must be set.

RT5640_GBL_CLK is changed by rt5640_set_dai_sysclk(), which gets called by
the pre_pmu / post_pmd functions of the "Platform Clock" dapm-supply.

This creates an ordering issue, during a dapm transition first all
connected() callbacks are called to build a list of supplies to enable
and then the complete list is walked to enable the supplies. Since the
connected() check happens before enabling any supplies,
is_sys_clk_from_pll() ends up deciding if the PWR_PLL bit should be set
based on the state the "Platform Clock" supply had *before* the transition.
This sometimes results in PWR_PLL being off, even though *after* the
transition PLL1 is configured as sys-clk.

This commit removes is_sys_clk_from_pll() instead simply setting / clearing
PWR_PLL in rt5640_set_dai_sysclk() based on the selected sys-clk, which
fixes this and as a bonus results in a nice cleanup.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
sound/soc/codecs/rt5640.c

index 0556742..140bad0 100644 (file)
@@ -476,20 +476,6 @@ static int set_dmic_clk(struct snd_soc_dapm_widget *w,
        return idx;
 }
 
-static int is_sys_clk_from_pll(struct snd_soc_dapm_widget *source,
-                        struct snd_soc_dapm_widget *sink)
-{
-       struct snd_soc_component *component = snd_soc_dapm_to_component(source->dapm);
-       unsigned int val;
-
-       val = snd_soc_component_read32(component, RT5640_GLB_CLK);
-       val &= RT5640_SCLK_SRC_MASK;
-       if (val == RT5640_SCLK_SRC_PLL1)
-               return 1;
-       else
-               return 0;
-}
-
 static int is_using_asrc(struct snd_soc_dapm_widget *source,
                         struct snd_soc_dapm_widget *sink)
 {
@@ -1071,9 +1057,6 @@ static int rt5640_hp_post_event(struct snd_soc_dapm_widget *w,
 }
 
 static const struct snd_soc_dapm_widget rt5640_dapm_widgets[] = {
-       SND_SOC_DAPM_SUPPLY("PLL1", RT5640_PWR_ANLG2,
-                       RT5640_PWR_PLL_BIT, 0, NULL, 0),
-
        /* ASRC */
        SND_SOC_DAPM_SUPPLY_S("Stereo Filter ASRC", 1, RT5640_ASRC_1,
                         15, 0, NULL, 0),
@@ -1427,22 +1410,18 @@ static const struct snd_soc_dapm_route rt5640_dapm_routes[] = {
        {"Stereo ADC MIXL", "ADC1 Switch", "Stereo ADC L1 Mux"},
        {"Stereo ADC MIXL", "ADC2 Switch", "Stereo ADC L2 Mux"},
        {"Stereo ADC MIXL", NULL, "Stereo Filter"},
-       {"Stereo Filter", NULL, "PLL1", is_sys_clk_from_pll},
 
        {"Stereo ADC MIXR", "ADC1 Switch", "Stereo ADC R1 Mux"},
        {"Stereo ADC MIXR", "ADC2 Switch", "Stereo ADC R2 Mux"},
        {"Stereo ADC MIXR", NULL, "Stereo Filter"},
-       {"Stereo Filter", NULL, "PLL1", is_sys_clk_from_pll},
 
        {"Mono ADC MIXL", "ADC1 Switch", "Mono ADC L1 Mux"},
        {"Mono ADC MIXL", "ADC2 Switch", "Mono ADC L2 Mux"},
        {"Mono ADC MIXL", NULL, "Mono Left Filter"},
-       {"Mono Left Filter", NULL, "PLL1", is_sys_clk_from_pll},
 
        {"Mono ADC MIXR", "ADC1 Switch", "Mono ADC R1 Mux"},
        {"Mono ADC MIXR", "ADC2 Switch", "Mono ADC R2 Mux"},
        {"Mono ADC MIXR", NULL, "Mono Right Filter"},
-       {"Mono Right Filter", NULL, "PLL1", is_sys_clk_from_pll},
 
        {"IF2 ADC L", NULL, "Mono ADC MIXL"},
        {"IF2 ADC R", NULL, "Mono ADC MIXR"},
@@ -1512,10 +1491,8 @@ static const struct snd_soc_dapm_route rt5640_dapm_routes[] = {
        {"DIG MIXR", "DAC R1 Switch", "DAC MIXR"},
 
        {"DAC L1", NULL, "Stereo DAC MIXL"},
-       {"DAC L1", NULL, "PLL1", is_sys_clk_from_pll},
        {"DAC L1", NULL, "DAC L1 Power"},
        {"DAC R1", NULL, "Stereo DAC MIXR"},
-       {"DAC R1", NULL, "PLL1", is_sys_clk_from_pll},
        {"DAC R1", NULL, "DAC R1 Power"},
 
        {"SPK MIXL", "REC MIXL Switch", "RECMIXL"},
@@ -1622,10 +1599,8 @@ static const struct snd_soc_dapm_route rt5640_specific_dapm_routes[] = {
        {"DIG MIXL", "DAC L2 Switch", "DAC L2 Mux"},
 
        {"DAC L2", NULL, "Mono DAC MIXL"},
-       {"DAC L2", NULL, "PLL1", is_sys_clk_from_pll},
        {"DAC L2", NULL, "DAC L2 Power"},
        {"DAC R2", NULL, "Mono DAC MIXR"},
-       {"DAC R2", NULL, "PLL1", is_sys_clk_from_pll},
        {"DAC R2", NULL, "DAC R2 Power"},
 
        {"SPK MIXL", "DAC L2 Switch", "DAC L2"},
@@ -1861,6 +1836,7 @@ static int rt5640_set_dai_sysclk(struct snd_soc_dai *dai,
        struct snd_soc_component *component = dai->component;
        struct rt5640_priv *rt5640 = snd_soc_component_get_drvdata(component);
        unsigned int reg_val = 0;
+       unsigned int pll_bit = 0;
 
        if (freq == rt5640->sysclk && clk_id == rt5640->sysclk_src)
                return 0;
@@ -1871,6 +1847,7 @@ static int rt5640_set_dai_sysclk(struct snd_soc_dai *dai,
                break;
        case RT5640_SCLK_S_PLL1:
                reg_val |= RT5640_SCLK_SRC_PLL1;
+               pll_bit |= RT5640_PWR_PLL;
                break;
        case RT5640_SCLK_S_RCCLK:
                reg_val |= RT5640_SCLK_SRC_RCCLK;
@@ -1879,6 +1856,8 @@ static int rt5640_set_dai_sysclk(struct snd_soc_dai *dai,
                dev_err(component->dev, "Invalid clock id (%d)\n", clk_id);
                return -EINVAL;
        }
+       snd_soc_component_update_bits(component, RT5640_PWR_ANLG2,
+               RT5640_PWR_PLL, pll_bit);
        snd_soc_component_update_bits(component, RT5640_GLB_CLK,
                RT5640_SCLK_SRC_MASK, reg_val);
        rt5640->sysclk = freq;