SET(LIBDIR ${PREFIX}/${LIB_PATH})
SET(INC_DIR include)
+IF(TIZEN_TV)
+INCLUDE_DIRECTORIES(${INC_DIR})
+INCLUDE_DIRECTORIES(${INC_DIR}/tv)
+ELSE ()
INCLUDE_DIRECTORIES(${INC_DIR})
+INCLUDE_DIRECTORIES(${INC_DIR}/common)
+ENDIF(TIZEN_TV)
SET(dependents "dlog vconf capi-base-common glib-2.0 network capi-system-info")
SET(pc_dependents "capi-base-common")
PATTERN "${INC_DIR}/*.h"
)
+IF (TIZEN_TV)
+INSTALL(
+ DIRECTORY ${INC_DIR}/tv/ DESTINATION include/network
+ FILES_MATCHING
+ PATTERN "${INC_DIR}/tv/*.h"
+ )
+ELSE ()
+INSTALL(
+ DIRECTORY ${INC_DIR}/common/ DESTINATION include/network
+ FILES_MATCHING
+ PATTERN "${INC_DIR}/common/*.h"
+ )
+ENDIF(TIZEN_TV)
+
SET(PC_NAME ${fw_name})
SET(PC_REQUIRED ${pc_dependents})
SET(PC_LDFLAGS -l${fw_name})
--- /dev/null
+/*
+ * Copyright (c) 2011-2013 Samsung Electronics Co., Ltd All Rights Reserved
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef __TIZEN_NETWORK_CONNECTION_PROFILE_H__
+#define __TIZEN_NETWORK_CONNECTION_PROFILE_H__
+
+#include <tizen.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * @file connection_profile.h
+ */
+
+/**
+* @addtogroup CAPI_NETWORK_CONNECTION_WIFI_PROFILE_MODULE
+* @{
+*/
+
+/**
+ * @brief Enumeration for security type of Wi-Fi.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+*/
+typedef enum
+{
+ CONNECTION_WIFI_SECURITY_TYPE_NONE = 0, /**< Security disabled */
+ CONNECTION_WIFI_SECURITY_TYPE_WEP = 1, /**< WEP */
+ CONNECTION_WIFI_SECURITY_TYPE_WPA_PSK = 2, /**< WPA-PSK */
+ CONNECTION_WIFI_SECURITY_TYPE_WPA2_PSK = 3, /**< WPA2-PSK */
+ CONNECTION_WIFI_SECURITY_TYPE_EAP = 4, /**< EAP */
+} connection_wifi_security_type_e;
+
+/**
+ * @brief Enumeration for encryption modes.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+*/
+typedef enum
+{
+ CONNECTION_WIFI_ENCRYPTION_TYPE_NONE = 0, /**< Encryption disabled */
+ CONNECTION_WIFI_ENCRYPTION_TYPE_WEP = 1, /**< WEP */
+ CONNECTION_WIFI_ENCRYPTION_TYPE_TKIP = 2, /**< TKIP */
+ CONNECTION_WIFI_ENCRYPTION_TYPE_AES = 3, /**< AES */
+ CONNECTION_WIFI_ENCRYPTION_TYPE_TKIP_AES_MIXED = 4, /**< TKIP and AES are both supported */
+} connection_wifi_encryption_type_e;
+
+/**
+* @}
+*/
+
+
+/**
+* @addtogroup CAPI_NETWORK_CONNECTION_CELLULAR_PROFILE_MODULE
+* @{
+*/
+
+/**
+ * @brief Enumeration for cellular service type.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+*/
+typedef enum
+{
+ CONNECTION_CELLULAR_SERVICE_TYPE_UNKNOWN = 0, /**< Unknown */
+ CONNECTION_CELLULAR_SERVICE_TYPE_INTERNET = 1, /**< Internet */
+ CONNECTION_CELLULAR_SERVICE_TYPE_MMS = 2, /**< MMS */
+ CONNECTION_CELLULAR_SERVICE_TYPE_PREPAID_INTERNET = 3, /**< Prepaid internet */
+ CONNECTION_CELLULAR_SERVICE_TYPE_PREPAID_MMS = 4, /**< Prepaid MMS */
+ CONNECTION_CELLULAR_SERVICE_TYPE_TETHERING = 5, /**< Tethering */
+ CONNECTION_CELLULAR_SERVICE_TYPE_APPLICATION = 6, /**< Specific application */
+} connection_cellular_service_type_e;
+
+/**
+ * @brief Enumeration for cellular pdn type.
+ * @since_tizen 3.0
+ */
+typedef enum
+{
+ CONNECTION_CELLULAR_PDN_TYPE_UNKNOWN = 0,
+ CONNECTION_CELLULAR_PDN_TYPE_IPV4 = 1,
+ CONNECTION_CELLULAR_PDN_TYPE_IPV6 = 2,
+ CONNECTION_CELLULAR_PDN_TYPE_IPV4_IPv6 = 3,
+} connection_cellular_pdn_type_e;
+
+/**
+ * @brief Enumeration for cellular authentication type.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+*/
+typedef enum
+{
+ CONNECTION_CELLULAR_AUTH_TYPE_NONE = 0, /**< No authentication */
+ CONNECTION_CELLULAR_AUTH_TYPE_PAP = 1, /**< PAP authentication */
+ CONNECTION_CELLULAR_AUTH_TYPE_CHAP = 2, /**< CHAP authentication */
+} connection_cellular_auth_type_e;
+
+/**
+* @}
+*/
+
+
+/**
+* @addtogroup CAPI_NETWORK_CONNECTION_PROFILE_MODULE
+* @{
+*/
+
+/**
+ * @brief The profile handle.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+*/
+typedef void* connection_profile_h;
+
+/**
+ * @brief Enumeration for profile state type.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+*/
+typedef enum
+{
+ CONNECTION_PROFILE_STATE_DISCONNECTED = 0, /**< Disconnected state */
+ CONNECTION_PROFILE_STATE_ASSOCIATION = 1, /**< Association state */
+ CONNECTION_PROFILE_STATE_CONFIGURATION = 2, /**< Configuration state */
+ CONNECTION_PROFILE_STATE_CONNECTED = 3, /**< Connected state */
+} connection_profile_state_e;
+
+/**
+ * @brief Enumeration for address family.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+*/
+typedef enum
+{
+ CONNECTION_ADDRESS_FAMILY_IPV4 = 0, /**< IPV4 Address type */
+ CONNECTION_ADDRESS_FAMILY_IPV6 = 1, /**< IPV6 Address type */
+} connection_address_family_e;
+
+/**
+ * @brief Enumeration for IP configuration type.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+*/
+typedef enum
+{
+ CONNECTION_IP_CONFIG_TYPE_NONE = 0, /**< Not defined */
+ CONNECTION_IP_CONFIG_TYPE_STATIC = 1, /**< Manual IP configuration */
+ CONNECTION_IP_CONFIG_TYPE_DYNAMIC = 2, /**< Config IP using DHCP client*/
+ CONNECTION_IP_CONFIG_TYPE_AUTO = 3, /**< Config IP from Auto IP pool (169.254/16). Later with DHCP client, if available */
+ CONNECTION_IP_CONFIG_TYPE_FIXED = 4, /**< Indicates an IP address that can not be modified */
+} connection_ip_config_type_e;
+
+/**
+ * @brief Enumeration for proxy method type.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+*/
+typedef enum
+{
+ CONNECTION_PROXY_TYPE_DIRECT = 0, /**< Direct connection */
+ CONNECTION_PROXY_TYPE_AUTO = 1, /**< Auto configuration(Use PAC file). If URL property is not set, DHCP/WPAD auto-discover will be tried */
+ CONNECTION_PROXY_TYPE_MANUAL = 2, /**< Manual configuration */
+} connection_proxy_type_e;
+
+/**
+ * @brief Enumeration for network connection type.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+*/
+typedef enum{
+ CONNECTION_PROFILE_TYPE_CELLULAR = 0, /**< Cellular type */
+ CONNECTION_PROFILE_TYPE_WIFI = 1, /**< Wi-Fi type */
+ CONNECTION_PROFILE_TYPE_ETHERNET = 2, /**< Ethernet type */
+ CONNECTION_PROFILE_TYPE_BT = 3, /**< Bluetooth type */
+} connection_profile_type_e;
+
+/**
+ * @brief Creates a profile handle.
+ * @details The profile name, which you get from connection_profile_get_name(), will include the keyword you set.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @privlevel public
+ * @privilege %http://tizen.org/privilege/network.get
+ * @remarks You must release @a profile using connection_profile_destroy().
+ * @param[in] type The type of profile\n
+ * #CONNECTION_PROFILE_TYPE_CELLULAR and #CONNECTION_PROFILE_TYPE_WIFI are supported.
+ * @param[in] keyword The keyword included in profile name
+ * @param[out] profile The handle of the profile
+ * @return @c 0 on success, otherwise negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+ * @see connection_profile_destroy()
+ * @see connection_profile_get_name()
+*/
+int connection_profile_create(connection_profile_type_e type, const char* keyword, connection_profile_h* profile);
+
+/**
+ * @brief Destroys a profile handle.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[out] profile The handle to the profile
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @see connection_profile_create()
+*/
+int connection_profile_destroy(connection_profile_h profile);
+
+/**
+ * @brief Clones a profile handle.
+ * @since_tizen 2.3
+ * @remarks You must release @a cloned_profile using connection_profile_destroy().
+ * @param[out] cloned_profile The handle of the cloned profile
+ * @param[in] origin_profile The handle of the origin profile
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @see connection_profile_destroy()
+*/
+int connection_profile_clone(connection_profile_h* cloned_profile, connection_profile_h origin_profile);
+
+/**
+ * @brief Gets the profile ID.
+ * @details The separate profiles can have the same name.
+ * So, you must use this API instead of connection_profile_get_name() if you want to get the unique identification.
+ * In case you create a profile, this value will be determined when you add the profile.
+ *
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @remarks You must release @a profile_id using free().
+ * @param[in] profile The profile handle
+ * @param[out] profile_id The ID of the profile
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @see connection_profile_get_name()
+ * @see connection_add_profile()
+*/
+int connection_profile_get_id(connection_profile_h profile, char** profile_id);
+
+/**
+ * @brief Gets the profile name.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @remarks You must release @a profile_name using free().
+ * @param[in] profile The profile handle
+ * @param[out] profile_name The name of the profile
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @see connection_profile_get_id()
+*/
+int connection_profile_get_name(connection_profile_h profile, char** profile_name);
+
+/**
+ * @brief Gets the network type.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[out] type The type of the profile
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+*/
+int connection_profile_get_type(connection_profile_h profile, connection_profile_type_e* type);
+
+/**
+ * @brief Gets the name of the network interface, e.g. eth0 and pdp0.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @remarks You must release @a interface_name using free().
+ * @param[in] profile The profile handle
+ * @param[out] interface_name The name of the network interface
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+*/
+int connection_profile_get_network_interface_name(connection_profile_h profile, char** interface_name);
+
+/**
+ * @brief Refreshes the profile information.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @privlevel public
+ * @privilege %http://tizen.org/privilege/network.get
+ * @remarks You should call this function in order to get the current information because the profile information can be changed.
+ * @param[in] profile The profile handle
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission Denied
+*/
+int connection_profile_refresh(connection_profile_h profile);
+
+/**
+ * @brief Gets the network type.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[out] state The state of the profile
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+*/
+int connection_profile_get_state(connection_profile_h profile, connection_profile_state_e* state);
+
+/**
+ * @brief Gets the IP config type.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[in] address_family The address family
+ * @param[out] type The type of the IP config
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+*/
+int connection_profile_get_ip_config_type(connection_profile_h profile, connection_address_family_e address_family, connection_ip_config_type_e* type);
+
+/**
+ * @brief Gets the IP address.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @remarks You must release @a ip_address using free().
+ * @param[in] profile The profile handle
+ * @param[in] address_family The address family
+ * @param[out] ip_address The IP address
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+*/
+int connection_profile_get_ip_address(connection_profile_h profile, connection_address_family_e address_family, char** ip_address);
+
+/**
+ * @brief Gets the Subnet Mask.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @remarks You must release @a subnet_mask using free().
+ * @param[in] profile The profile handle
+ * @param[in] address_family The address family
+ * @param[out] subnet_mask The subnet mask
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+*/
+int connection_profile_get_subnet_mask(connection_profile_h profile, connection_address_family_e address_family, char** subnet_mask);
+
+/**
+ * @brief Gets the Gateway address.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @remarks You must release @a gateway_address using free().
+ * @param[in] profile The profile handle
+ * @param[in] address_family The address family
+ * @param[out] gateway_address The gateway address
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+*/
+int connection_profile_get_gateway_address(connection_profile_h profile, connection_address_family_e address_family, char** gateway_address);
+
+/**
+ * @brief Gets the DNS address.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @remarks The allowance of the DNS address is @c 2. You must release @a dns_address using free().
+ * @param[in] profile The profile handle
+ * @param[in] order The order of DNS address \n
+ * it starts from 1, which means first DNS address.
+ * @param[in] address_family The address family
+ * @param[out] dns_address The DNS address
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+*/
+int connection_profile_get_dns_address(connection_profile_h profile, int order, connection_address_family_e address_family, char** dns_address);
+
+/**
+ * @brief Gets the Proxy type.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[out] type The type of the proxy
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+*/
+int connection_profile_get_proxy_type(connection_profile_h profile, connection_proxy_type_e* type);
+
+/**
+ * @brief Gets the Proxy address.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @remarks You must release @a proxy_address using free().
+ * @param[in] profile The profile handle
+ * @param[in] address_family The address family
+ * @param[out] proxy_address The proxy address
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+*/
+int connection_profile_get_proxy_address(connection_profile_h profile, connection_address_family_e address_family, char** proxy_address);
+
+/**
+ * @brief Sets the IP config type.
+ * @details If you set IP config type to #CONNECTION_IP_CONFIG_TYPE_STATIC,
+ * then IP address, Gateway and Subnet mask will be set to the initial value "0.0.0.0".
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[in] address_family The address family
+ * @param[in] type The type of the IP config
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+*/
+int connection_profile_set_ip_config_type(connection_profile_h profile, connection_address_family_e address_family, connection_ip_config_type_e type);
+
+/**
+ * @brief Sets the IP address.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[in] address_family The address family
+ * @param[in] ip_address The IP address.\n
+ * If you set this value to @c NULL, then the existing value will be deleted.
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @see connection_update_profile()
+*/
+int connection_profile_set_ip_address(connection_profile_h profile, connection_address_family_e address_family, const char* ip_address);
+
+/**
+ * @brief Sets the Subnet Mask.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[in] address_family The address family
+ * @param[in] subnet_mask The subnet mask. \n
+ * If you set this value to @c NULL, then the existing value will be deleted.
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @see connection_update_profile()
+*/
+int connection_profile_set_subnet_mask(connection_profile_h profile, connection_address_family_e address_family, const char* subnet_mask);
+
+/**
+ * @brief Sets the Gateway address.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[in] address_family The address family
+ * @param[in] gateway_address The gateway address. \n
+ * If you set this value to @c NULL, then the existing value will be deleted.
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @see connection_update_profile()
+*/
+int connection_profile_set_gateway_address(connection_profile_h profile, connection_address_family_e address_family, const char* gateway_address);
+
+/**
+ * @brief Sets the DNS address.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @remarks The allowance of the DNS address is @c 2.
+ * @param[in] profile The profile handle
+ * @param[in] order The order of the DNS address. \n
+ * It starts from @c 1, which means first DNS address.
+ * @param[in] address_family The address family
+ * @param[in] dns_address The DNS address; if you set this value to NULL, then the existing value will be deleted
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @see connection_update_profile()
+*/
+int connection_profile_set_dns_address(connection_profile_h profile, int order, connection_address_family_e address_family, const char* dns_address);
+
+/**
+ * @brief Sets the Proxy type.
+ * @details If you set the Proxy type to #CONNECTION_PROXY_TYPE_AUTO or #CONNECTION_PROXY_TYPE_MANUAL, then Proxy will be restored.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[in] type The type of the proxy
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @see connection_update_profile()
+*/
+int connection_profile_set_proxy_type(connection_profile_h profile, connection_proxy_type_e type);
+
+/**
+ * @brief Sets the Proxy address.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[in] address_family The address family
+ * @param[in] proxy_address The proxy address. \n
+ * if you set this value to @c NULL, then the existing value will be deleted.
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @see connection_update_profile()
+*/
+int connection_profile_set_proxy_address(connection_profile_h profile, connection_address_family_e address_family, const char* proxy_address);
+
+/**
+ * @brief Called when the state of the profile is changed.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] state The state
+ * @param[in] user_data The user data passed from the callback registration function
+ * @see connection_profile_set_state_changed_cb()
+ * @see connection_profile_unset_state_changed_cb()
+*/
+typedef void(*connection_profile_state_changed_cb)(connection_profile_state_e state, void* user_data);
+
+/**
+ * @brief Registers the callback that is called when the state of profile is changed.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[in] callback The callback function to be called
+ * @param[in] user_data The user data passed to the callback function
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @post connection_opened_cb() is invoked when the state of profile is changed.
+ * @see connection_profile_state_changed_cb()
+ * @see connection_profile_unset_state_changed_cb()
+*/
+int connection_profile_set_state_changed_cb(connection_profile_h profile, connection_profile_state_changed_cb callback, void* user_data);
+
+/**
+ * @brief Unregisters the callback that is called when the state of profile is changed.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @see connection_profile_state_changed_cb()
+ * @see connection_profile_set_state_changed_cb()
+*/
+int connection_profile_unset_state_changed_cb(connection_profile_h profile);
+
+/**
+* @}
+*/
+
+
+/**
+* @addtogroup CAPI_NETWORK_CONNECTION_WIFI_PROFILE_MODULE
+* @{
+*/
+
+/**
+ * @brief Gets the ESSID (Extended Service Set Identifier).
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @remarks You must release @a essid using free().
+ * @param[in] profile The profile handle
+ * @param[out] essid The ESSID
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+*/
+int connection_profile_get_wifi_essid(connection_profile_h profile, char** essid);
+
+/**
+ * @brief Gets the BSSID (Basic Service Set Identifier).
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @remarks You must release @a bssid using free().
+ * @param[in] profile The profile handle
+ * @param[out] bssid The BSSID
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+*/
+int connection_profile_get_wifi_bssid(connection_profile_h profile, char** bssid);
+
+/**
+ * @brief Gets the RSSI.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[out] rssi The RSSI
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+*/
+int connection_profile_get_wifi_rssi(connection_profile_h profile, int* rssi);
+
+/**
+ * @brief Gets the frequency (MHz).
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[out] frequency The frequency
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+*/
+int connection_profile_get_wifi_frequency(connection_profile_h profile, int* frequency);
+
+/**
+ * @brief Gets the max speed (Mbps).
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[out] max_speed The max speed
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+*/
+int connection_profile_get_wifi_max_speed(connection_profile_h profile, int* max_speed);
+
+/**
+ * @brief Gets the security mode of Wi-Fi.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[out] type The type of Wi-Fi security
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+*/
+int connection_profile_get_wifi_security_type(connection_profile_h profile, connection_wifi_security_type_e* type);
+
+/**
+ * @brief Gets the security mode of Wi-Fi.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[out] type The type of Wi-Fi security
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+*/
+int connection_profile_get_wifi_encryption_type(connection_profile_h profile, connection_wifi_encryption_type_e* type);
+
+/**
+ * @brief Checks whether passphrase is required.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @remarks This function is not valid if security type is #CONNECTION_WIFI_SECURITY_TYPE_EAP.
+ * @param[in] profile The profile handle
+ * @param[out] required @c true if a passphrase is required, otherwise @c false if a passphrase is not required.
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+*/
+int connection_profile_is_wifi_passphrase_required(connection_profile_h profile, bool* required);
+
+/**
+ * @brief Sets the passphrase of the Wi-Fi WPA.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[in] passphrase The passphrase of Wi-Fi security
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+ * @see connection_update_profile()
+*/
+int connection_profile_set_wifi_passphrase(connection_profile_h profile, const char* passphrase);
+
+/**
+ * @brief Checks whether the WPS (Wi-Fi Protected Setup) is supported.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @remarks If WPS is supported, you can connect the access point with WPS by wifi_connect_with_wps().
+ * @param[in] profile The profile handle
+ * @param[out] supported @c true if WPS is supported, otherwise @c false if WPS is not supported.
+ * @return @c 0 on success, otherwise negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+*/
+int connection_profile_is_wifi_wps_supported(connection_profile_h profile, bool* supported);
+
+/**
+* @}
+*/
+
+
+/**
+* @addtogroup CAPI_NETWORK_CONNECTION_CELLULAR_PROFILE_MODULE
+* @{
+*/
+
+/**
+ * @brief Gets the service type.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[out] type The type of the cellular service
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+*/
+int connection_profile_get_cellular_service_type(connection_profile_h profile, connection_cellular_service_type_e* type);
+
+/**
+ * @brief Gets the APN (access point name).
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @remarks You must release @a apn using free().
+ * @param[in] profile The profile handle
+ * @param[out] apn The name of the APN
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+*/
+int connection_profile_get_cellular_apn(connection_profile_h profile, char** apn);
+
+/**
+ * @brief Gets the authentication information.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @remarks You must release @a user_name and @a password using free().
+ * @param[in] profile The profile handle
+ * @param[out] type The type of the authentication
+ * @param[out] user_name The user name
+ * @param[out] password The password
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+*/
+int connection_profile_get_cellular_auth_info(connection_profile_h profile, connection_cellular_auth_type_e* type, char** user_name, char** password);
+
+/**
+ * @brief Gets the home URL.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @remarks You must release @a home_url using free().
+ * @param[in] profile The profile handle
+ * @param[out] home_url The home URL
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+*/
+int connection_profile_get_cellular_home_url(connection_profile_h profile, char** home_url);
+
+/**
+ * @brief Gets the cellular pdn type.
+ * @since_tizen 3.0
+ * @param[in] profile The profile handle
+ * @param[out] type The cellular pdn type
+ * @return @c 0 on success, otherwise negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not Supported
+*/
+int connection_profile_get_cellular_pdn_type(connection_profile_h profile, connection_cellular_pdn_type_e* type);
+
+/**
+ * @brief Gets the cellular roam pdn type.
+ * @since_tizen 3.0
+ * @param[in] profile The profile handle
+ * @param[out] type The cellular pdn type
+ * @return @c 0 on success, otherwise negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not Supported
+*/
+int connection_profile_get_cellular_roam_pdn_type(connection_profile_h profile, connection_cellular_pdn_type_e* type);
+
+/**
+ * @brief Checks wheter the connection is in roaming state.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[out] is_roaming @c true if the cellular is roaming, otherwise @c false if it is not roaming.
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+*/
+int connection_profile_is_cellular_roaming(connection_profile_h profile, bool* is_roaming);
+
+/**
+ * @brief Checks whether the profile is hidden.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[out] is_hidden @c ture if the profile is in hidden, otherwise @c false if the profile is not hidden.
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+*/
+int connection_profile_is_cellular_hidden(connection_profile_h profile, bool* is_hidden);
+
+/**
+ * @brief Checks whether the profile is editable.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[out] is_editable @c true if the profile is editable, otherwise @c false if the profile is not editable.
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+*/
+int connection_profile_is_cellular_editable(connection_profile_h profile, bool* is_editable);
+
+/**
+ * @brief Checks whether the profile is default.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[out] is_default @c true if the profile is default, otherwise @c false if the profile is not default.
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+*/
+int connection_profile_is_cellular_default(connection_profile_h profile, bool* is_default);
+
+/**
+ * @brief Sets the service type.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[in] service_type The type of cellular service
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+ * @see connection_update_profile()
+*/
+int connection_profile_set_cellular_service_type(connection_profile_h profile, connection_cellular_service_type_e service_type);
+
+/**
+ * @brief Sets the APN (Access Point Name).
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[in] apn The name of APN
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+ * @see connection_update_profile()
+*/
+int connection_profile_set_cellular_apn(connection_profile_h profile, const char* apn);
+
+/**
+ * @brief Sets the Authentication information.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[in] type The type of the authentication
+ * @param[in] user_name The user name
+ * @param[in] password The password
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+ * @see connection_update_profile()
+*/
+int connection_profile_set_cellular_auth_info(connection_profile_h profile, connection_cellular_auth_type_e type, const char* user_name, const char* password);
+
+/**
+ * @brief Sets the home URL.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[in] home_url The home URL
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+ * @see connection_update_profile()
+*/
+int connection_profile_set_cellular_home_url(connection_profile_h profile, const char* home_url);
+
+/**
+ * @brief Sets the cellular pdn type.
+ * @since_tizen 3.0
+ * @param[in] profile The profile handle
+ * @param[in] type The cellular pdn type
+ * @return @c 0 on success, otherwise negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not Supported
+*/
+int connection_profile_set_cellular_pdn_type(connection_profile_h profile, connection_cellular_pdn_type_e type);
+
+/**
+ * @brief Sets the cellular roam pdn type.
+ * @since_tizen 3.0
+ * @param[in] profile The profile handle
+ * @param[in] type The cellular pdn type
+ * @return @c 0 on success, otherwise negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission Denied
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not Supported
+*/
+int connection_profile_set_cellular_roam_pdn_type(connection_profile_h profile, connection_cellular_pdn_type_e type);
+
+/**
+* @}
+*/
+
+
+#ifdef __cplusplus
+}
+
+#endif
+
+#endif /* __TIZEN_NETWORK_CONNECTION_PROFILE_H__ */
+++ /dev/null
-/*
- * Copyright (c) 2011-2013 Samsung Electronics Co., Ltd All Rights Reserved
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#ifndef __TIZEN_NETWORK_CONNECTION_PROFILE_H__
-#define __TIZEN_NETWORK_CONNECTION_PROFILE_H__
-
-#include <tizen.h>
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/**
- * @file connection_profile.h
- */
-
-/**
-* @addtogroup CAPI_NETWORK_CONNECTION_WIFI_PROFILE_MODULE
-* @{
-*/
-
-/**
- * @brief Enumeration for security type of Wi-Fi.
- * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
-*/
-typedef enum
-{
- CONNECTION_WIFI_SECURITY_TYPE_NONE = 0, /**< Security disabled */
- CONNECTION_WIFI_SECURITY_TYPE_WEP = 1, /**< WEP */
- CONNECTION_WIFI_SECURITY_TYPE_WPA_PSK = 2, /**< WPA-PSK */
- CONNECTION_WIFI_SECURITY_TYPE_WPA2_PSK = 3, /**< WPA2-PSK */
- CONNECTION_WIFI_SECURITY_TYPE_EAP = 4, /**< EAP */
-} connection_wifi_security_type_e;
-
-/**
- * @brief Enumeration for encryption modes.
- * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
-*/
-typedef enum
-{
- CONNECTION_WIFI_ENCRYPTION_TYPE_NONE = 0, /**< Encryption disabled */
- CONNECTION_WIFI_ENCRYPTION_TYPE_WEP = 1, /**< WEP */
- CONNECTION_WIFI_ENCRYPTION_TYPE_TKIP = 2, /**< TKIP */
- CONNECTION_WIFI_ENCRYPTION_TYPE_AES = 3, /**< AES */
- CONNECTION_WIFI_ENCRYPTION_TYPE_TKIP_AES_MIXED = 4, /**< TKIP and AES are both supported */
-} connection_wifi_encryption_type_e;
-
-/**
-* @}
-*/
-
-
-/**
-* @addtogroup CAPI_NETWORK_CONNECTION_CELLULAR_PROFILE_MODULE
-* @{
-*/
-
-/**
- * @brief Enumeration for cellular service type.
- * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
-*/
-typedef enum
-{
- CONNECTION_CELLULAR_SERVICE_TYPE_UNKNOWN = 0, /**< Unknown */
- CONNECTION_CELLULAR_SERVICE_TYPE_INTERNET = 1, /**< Internet */
- CONNECTION_CELLULAR_SERVICE_TYPE_MMS = 2, /**< MMS */
- CONNECTION_CELLULAR_SERVICE_TYPE_PREPAID_INTERNET = 3, /**< Prepaid internet */
- CONNECTION_CELLULAR_SERVICE_TYPE_PREPAID_MMS = 4, /**< Prepaid MMS */
- CONNECTION_CELLULAR_SERVICE_TYPE_TETHERING = 5, /**< Tethering */
- CONNECTION_CELLULAR_SERVICE_TYPE_APPLICATION = 6, /**< Specific application */
-} connection_cellular_service_type_e;
-
-/**
- * @brief Enumeration for cellular pdn type.
- * @since_tizen 3.0
- */
-typedef enum
-{
- CONNECTION_CELLULAR_PDN_TYPE_UNKNOWN = 0,
- CONNECTION_CELLULAR_PDN_TYPE_IPV4 = 1,
- CONNECTION_CELLULAR_PDN_TYPE_IPV6 = 2,
- CONNECTION_CELLULAR_PDN_TYPE_IPV4_IPv6 = 3,
-} connection_cellular_pdn_type_e;
-
-/**
- * @brief Enumeration for cellular authentication type.
- * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
-*/
-typedef enum
-{
- CONNECTION_CELLULAR_AUTH_TYPE_NONE = 0, /**< No authentication */
- CONNECTION_CELLULAR_AUTH_TYPE_PAP = 1, /**< PAP authentication */
- CONNECTION_CELLULAR_AUTH_TYPE_CHAP = 2, /**< CHAP authentication */
-} connection_cellular_auth_type_e;
-
-/**
-* @}
-*/
-
-
-/**
-* @addtogroup CAPI_NETWORK_CONNECTION_PROFILE_MODULE
-* @{
-*/
-
-/**
- * @brief The profile handle.
- * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
-*/
-typedef void* connection_profile_h;
-
-/**
- * @brief Enumeration for profile state type.
- * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
-*/
-typedef enum
-{
- CONNECTION_PROFILE_STATE_DISCONNECTED = 0, /**< Disconnected state */
- CONNECTION_PROFILE_STATE_ASSOCIATION = 1, /**< Association state */
- CONNECTION_PROFILE_STATE_CONFIGURATION = 2, /**< Configuration state */
- CONNECTION_PROFILE_STATE_CONNECTED = 3, /**< Connected state */
-} connection_profile_state_e;
-
-/**
- * @brief Enumeration for address family.
- * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
-*/
-typedef enum
-{
- CONNECTION_ADDRESS_FAMILY_IPV4 = 0, /**< IPV4 Address type */
- CONNECTION_ADDRESS_FAMILY_IPV6 = 1, /**< IPV6 Address type */
-} connection_address_family_e;
-
-/**
- * @brief Enumeration for IP configuration type.
- * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
-*/
-typedef enum
-{
- CONNECTION_IP_CONFIG_TYPE_NONE = 0, /**< Not defined */
- CONNECTION_IP_CONFIG_TYPE_STATIC = 1, /**< Manual IP configuration */
- CONNECTION_IP_CONFIG_TYPE_DYNAMIC = 2, /**< Config IP using DHCP client*/
- CONNECTION_IP_CONFIG_TYPE_AUTO = 3, /**< Config IP from Auto IP pool (169.254/16). Later with DHCP client, if available */
- CONNECTION_IP_CONFIG_TYPE_FIXED = 4, /**< Indicates an IP address that can not be modified */
-} connection_ip_config_type_e;
-
-/**
- * @brief Enumeration for proxy method type.
- * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
-*/
-typedef enum
-{
- CONNECTION_PROXY_TYPE_DIRECT = 0, /**< Direct connection */
- CONNECTION_PROXY_TYPE_AUTO = 1, /**< Auto configuration(Use PAC file). If URL property is not set, DHCP/WPAD auto-discover will be tried */
- CONNECTION_PROXY_TYPE_MANUAL = 2, /**< Manual configuration */
-} connection_proxy_type_e;
-
-/**
- * @brief Enumeration for network connection type.
- * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
-*/
-typedef enum{
- CONNECTION_PROFILE_TYPE_CELLULAR = 0, /**< Cellular type */
- CONNECTION_PROFILE_TYPE_WIFI = 1, /**< Wi-Fi type */
- CONNECTION_PROFILE_TYPE_ETHERNET = 2, /**< Ethernet type */
- CONNECTION_PROFILE_TYPE_BT = 3, /**< Bluetooth type */
-} connection_profile_type_e;
-
-/**
- * @brief Creates a profile handle.
- * @details The profile name, which you get from connection_profile_get_name(), will include the keyword you set.
- * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @privlevel public
- * @privilege %http://tizen.org/privilege/network.get
- * @remarks You must release @a profile using connection_profile_destroy().
- * @param[in] type The type of profile\n
- * #CONNECTION_PROFILE_TYPE_CELLULAR and #CONNECTION_PROFILE_TYPE_WIFI are supported.
- * @param[in] keyword The keyword included in profile name
- * @param[out] profile The handle of the profile
- * @return @c 0 on success, otherwise negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
- * @see connection_profile_destroy()
- * @see connection_profile_get_name()
-*/
-int connection_profile_create(connection_profile_type_e type, const char* keyword, connection_profile_h* profile);
-
-/**
- * @brief Destroys a profile handle.
- * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[out] profile The handle to the profile
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @see connection_profile_create()
-*/
-int connection_profile_destroy(connection_profile_h profile);
-
-/**
- * @brief Clones a profile handle.
- * @since_tizen 2.3
- * @remarks You must release @a cloned_profile using connection_profile_destroy().
- * @param[out] cloned_profile The handle of the cloned profile
- * @param[in] origin_profile The handle of the origin profile
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
- * @see connection_profile_destroy()
-*/
-int connection_profile_clone(connection_profile_h* cloned_profile, connection_profile_h origin_profile);
-
-/**
- * @brief Gets the profile ID.
- * @details The separate profiles can have the same name.
- * So, you must use this API instead of connection_profile_get_name() if you want to get the unique identification.
- * In case you create a profile, this value will be determined when you add the profile.
- *
- * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @remarks You must release @a profile_id using free().
- * @param[in] profile The profile handle
- * @param[out] profile_id The ID of the profile
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
- * @see connection_profile_get_name()
- * @see connection_add_profile()
-*/
-int connection_profile_get_id(connection_profile_h profile, char** profile_id);
-
-/**
- * @brief Gets the profile name.
- * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @remarks You must release @a profile_name using free().
- * @param[in] profile The profile handle
- * @param[out] profile_name The name of the profile
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
- * @see connection_profile_get_id()
-*/
-int connection_profile_get_name(connection_profile_h profile, char** profile_name);
-
-/**
- * @brief Gets the network type.
- * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] profile The profile handle
- * @param[out] type The type of the profile
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
-*/
-int connection_profile_get_type(connection_profile_h profile, connection_profile_type_e* type);
-
-/**
- * @brief Gets the name of the network interface, e.g. eth0 and pdp0.
- * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @remarks You must release @a interface_name using free().
- * @param[in] profile The profile handle
- * @param[out] interface_name The name of the network interface
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
-*/
-int connection_profile_get_network_interface_name(connection_profile_h profile, char** interface_name);
-
-/**
- * @brief Refreshes the profile information.
- * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @privlevel public
- * @privilege %http://tizen.org/privilege/network.get
- * @remarks You should call this function in order to get the current information because the profile information can be changed.
- * @param[in] profile The profile handle
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
- * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
- * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission Denied
-*/
-int connection_profile_refresh(connection_profile_h profile);
-
-/**
- * @brief Gets the network type.
- * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] profile The profile handle
- * @param[out] state The state of the profile
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
-*/
-int connection_profile_get_state(connection_profile_h profile, connection_profile_state_e* state);
-
-/**
- * @brief Gets the IP config type.
- * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] profile The profile handle
- * @param[in] address_family The address family
- * @param[out] type The type of the IP config
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
-*/
-int connection_profile_get_ip_config_type(connection_profile_h profile, connection_address_family_e address_family, connection_ip_config_type_e* type);
-
-/**
- * @brief Gets the IP address.
- * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @remarks You must release @a ip_address using free().
- * @param[in] profile The profile handle
- * @param[in] address_family The address family
- * @param[out] ip_address The IP address
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
- * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
-*/
-int connection_profile_get_ip_address(connection_profile_h profile, connection_address_family_e address_family, char** ip_address);
-
-/**
- * @brief Gets the Subnet Mask.
- * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @remarks You must release @a subnet_mask using free().
- * @param[in] profile The profile handle
- * @param[in] address_family The address family
- * @param[out] subnet_mask The subnet mask
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
- * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
-*/
-int connection_profile_get_subnet_mask(connection_profile_h profile, connection_address_family_e address_family, char** subnet_mask);
-
-/**
- * @brief Gets the Gateway address.
- * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @remarks You must release @a gateway_address using free().
- * @param[in] profile The profile handle
- * @param[in] address_family The address family
- * @param[out] gateway_address The gateway address
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
- * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
-*/
-int connection_profile_get_gateway_address(connection_profile_h profile, connection_address_family_e address_family, char** gateway_address);
-
-/**
- * @brief Gets the DNS address.
- * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @remarks The allowance of the DNS address is @c 2. You must release @a dns_address using free().
- * @param[in] profile The profile handle
- * @param[in] order The order of DNS address \n
- * it starts from 1, which means first DNS address.
- * @param[in] address_family The address family
- * @param[out] dns_address The DNS address
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
- * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
-*/
-int connection_profile_get_dns_address(connection_profile_h profile, int order, connection_address_family_e address_family, char** dns_address);
-
-/**
- * @brief Gets the Proxy type.
- * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] profile The profile handle
- * @param[out] type The type of the proxy
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
-*/
-int connection_profile_get_proxy_type(connection_profile_h profile, connection_proxy_type_e* type);
-
-/**
- * @brief Gets the Proxy address.
- * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @remarks You must release @a proxy_address using free().
- * @param[in] profile The profile handle
- * @param[in] address_family The address family
- * @param[out] proxy_address The proxy address
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
- * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
-*/
-int connection_profile_get_proxy_address(connection_profile_h profile, connection_address_family_e address_family, char** proxy_address);
-
-/**
- * @brief Sets the IP config type.
- * @details If you set IP config type to #CONNECTION_IP_CONFIG_TYPE_STATIC,
- * then IP address, Gateway and Subnet mask will be set to the initial value "0.0.0.0".
- * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] profile The profile handle
- * @param[in] address_family The address family
- * @param[in] type The type of the IP config
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
-*/
-int connection_profile_set_ip_config_type(connection_profile_h profile, connection_address_family_e address_family, connection_ip_config_type_e type);
-
-/**
- * @brief Sets the IP address.
- * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] profile The profile handle
- * @param[in] address_family The address family
- * @param[in] ip_address The IP address.\n
- * If you set this value to @c NULL, then the existing value will be deleted.
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
- * @see connection_update_profile()
-*/
-int connection_profile_set_ip_address(connection_profile_h profile, connection_address_family_e address_family, const char* ip_address);
-
-/**
- * @brief Sets the Subnet Mask.
- * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] profile The profile handle
- * @param[in] address_family The address family
- * @param[in] subnet_mask The subnet mask. \n
- * If you set this value to @c NULL, then the existing value will be deleted.
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
- * @see connection_update_profile()
-*/
-int connection_profile_set_subnet_mask(connection_profile_h profile, connection_address_family_e address_family, const char* subnet_mask);
-
-/**
- * @brief Sets the Gateway address.
- * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] profile The profile handle
- * @param[in] address_family The address family
- * @param[in] gateway_address The gateway address. \n
- * If you set this value to @c NULL, then the existing value will be deleted.
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
- * @see connection_update_profile()
-*/
-int connection_profile_set_gateway_address(connection_profile_h profile, connection_address_family_e address_family, const char* gateway_address);
-
-/**
- * @brief Sets the DNS address.
- * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @remarks The allowance of the DNS address is @c 2.
- * @param[in] profile The profile handle
- * @param[in] order The order of the DNS address. \n
- * It starts from @c 1, which means first DNS address.
- * @param[in] address_family The address family
- * @param[in] dns_address The DNS address; if you set this value to NULL, then the existing value will be deleted
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
- * @see connection_update_profile()
-*/
-int connection_profile_set_dns_address(connection_profile_h profile, int order, connection_address_family_e address_family, const char* dns_address);
-
-/**
- * @brief Sets the Proxy type.
- * @details If you set the Proxy type to #CONNECTION_PROXY_TYPE_AUTO or #CONNECTION_PROXY_TYPE_MANUAL, then Proxy will be restored.
- * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] profile The profile handle
- * @param[in] type The type of the proxy
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
- * @see connection_update_profile()
-*/
-int connection_profile_set_proxy_type(connection_profile_h profile, connection_proxy_type_e type);
-
-/**
- * @brief Sets the Proxy address.
- * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] profile The profile handle
- * @param[in] address_family The address family
- * @param[in] proxy_address The proxy address. \n
- * if you set this value to @c NULL, then the existing value will be deleted.
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
- * @see connection_update_profile()
-*/
-int connection_profile_set_proxy_address(connection_profile_h profile, connection_address_family_e address_family, const char* proxy_address);
-
-/**
- * @brief Called when the state of the profile is changed.
- * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] state The state
- * @param[in] user_data The user data passed from the callback registration function
- * @see connection_profile_set_state_changed_cb()
- * @see connection_profile_unset_state_changed_cb()
-*/
-typedef void(*connection_profile_state_changed_cb)(connection_profile_state_e state, void* user_data);
-
-/**
- * @brief Registers the callback that is called when the state of profile is changed.
- * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] profile The profile handle
- * @param[in] callback The callback function to be called
- * @param[in] user_data The user data passed to the callback function
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
- * @post connection_opened_cb() is invoked when the state of profile is changed.
- * @see connection_profile_state_changed_cb()
- * @see connection_profile_unset_state_changed_cb()
-*/
-int connection_profile_set_state_changed_cb(connection_profile_h profile, connection_profile_state_changed_cb callback, void* user_data);
-
-/**
- * @brief Unregisters the callback that is called when the state of profile is changed.
- * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] profile The profile handle
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @see connection_profile_state_changed_cb()
- * @see connection_profile_set_state_changed_cb()
-*/
-int connection_profile_unset_state_changed_cb(connection_profile_h profile);
-
-/**
-* @}
-*/
-
-
-/**
-* @addtogroup CAPI_NETWORK_CONNECTION_WIFI_PROFILE_MODULE
-* @{
-*/
-
-/**
- * @brief Gets the ESSID (Extended Service Set Identifier).
- * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @remarks You must release @a essid using free().
- * @param[in] profile The profile handle
- * @param[out] essid The ESSID
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
-*/
-int connection_profile_get_wifi_essid(connection_profile_h profile, char** essid);
-
-/**
- * @brief Gets the BSSID (Basic Service Set Identifier).
- * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @remarks You must release @a bssid using free().
- * @param[in] profile The profile handle
- * @param[out] bssid The BSSID
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
-*/
-int connection_profile_get_wifi_bssid(connection_profile_h profile, char** bssid);
-
-/**
- * @brief Gets the RSSI.
- * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] profile The profile handle
- * @param[out] rssi The RSSI
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
-*/
-int connection_profile_get_wifi_rssi(connection_profile_h profile, int* rssi);
-
-/**
- * @brief Gets the frequency (MHz).
- * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] profile The profile handle
- * @param[out] frequency The frequency
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
-*/
-int connection_profile_get_wifi_frequency(connection_profile_h profile, int* frequency);
-
-/**
- * @brief Gets the max speed (Mbps).
- * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] profile The profile handle
- * @param[out] max_speed The max speed
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
-*/
-int connection_profile_get_wifi_max_speed(connection_profile_h profile, int* max_speed);
-
-/**
- * @brief Gets the security mode of Wi-Fi.
- * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] profile The profile handle
- * @param[out] type The type of Wi-Fi security
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
-*/
-int connection_profile_get_wifi_security_type(connection_profile_h profile, connection_wifi_security_type_e* type);
-
-/**
- * @brief Gets the security mode of Wi-Fi.
- * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] profile The profile handle
- * @param[out] type The type of Wi-Fi security
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
-*/
-int connection_profile_get_wifi_encryption_type(connection_profile_h profile, connection_wifi_encryption_type_e* type);
-
-/**
- * @brief Checks whether passphrase is required.
- * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @remarks This function is not valid if security type is #CONNECTION_WIFI_SECURITY_TYPE_EAP.
- * @param[in] profile The profile handle
- * @param[out] required @c true if a passphrase is required, otherwise @c false if a passphrase is not required.
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
-*/
-int connection_profile_is_wifi_passphrase_required(connection_profile_h profile, bool* required);
-
-/**
- * @brief Sets the passphrase of the Wi-Fi WPA.
- * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] profile The profile handle
- * @param[in] passphrase The passphrase of Wi-Fi security
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
- * @see connection_update_profile()
-*/
-int connection_profile_set_wifi_passphrase(connection_profile_h profile, const char* passphrase);
-
-/**
- * @brief Checks whether the WPS (Wi-Fi Protected Setup) is supported.
- * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @remarks If WPS is supported, you can connect the access point with WPS by wifi_connect_with_wps().
- * @param[in] profile The profile handle
- * @param[out] supported @c true if WPS is supported, otherwise @c false if WPS is not supported.
- * @return @c 0 on success, otherwise negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
-*/
-int connection_profile_is_wifi_wps_supported(connection_profile_h profile, bool* supported);
-
-/**
-* @}
-*/
-
-
-/**
-* @addtogroup CAPI_NETWORK_CONNECTION_CELLULAR_PROFILE_MODULE
-* @{
-*/
-
-/**
- * @brief Gets the service type.
- * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] profile The profile handle
- * @param[out] type The type of the cellular service
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
-*/
-int connection_profile_get_cellular_service_type(connection_profile_h profile, connection_cellular_service_type_e* type);
-
-/**
- * @brief Gets the APN (access point name).
- * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @remarks You must release @a apn using free().
- * @param[in] profile The profile handle
- * @param[out] apn The name of the APN
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
-*/
-int connection_profile_get_cellular_apn(connection_profile_h profile, char** apn);
-
-/**
- * @brief Gets the authentication information.
- * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @remarks You must release @a user_name and @a password using free().
- * @param[in] profile The profile handle
- * @param[out] type The type of the authentication
- * @param[out] user_name The user name
- * @param[out] password The password
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
-*/
-int connection_profile_get_cellular_auth_info(connection_profile_h profile, connection_cellular_auth_type_e* type, char** user_name, char** password);
-
-/**
- * @brief Gets the home URL.
- * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @remarks You must release @a home_url using free().
- * @param[in] profile The profile handle
- * @param[out] home_url The home URL
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
-*/
-int connection_profile_get_cellular_home_url(connection_profile_h profile, char** home_url);
-
-/**
- * @brief Gets the cellular pdn type.
- * @since_tizen 3.0
- * @param[in] profile The profile handle
- * @param[out] type The cellular pdn type
- * @return @c 0 on success, otherwise negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not Supported
-*/
-int connection_profile_get_cellular_pdn_type(connection_profile_h profile, connection_cellular_pdn_type_e* type);
-
-/**
- * @brief Gets the cellular roam pdn type.
- * @since_tizen 3.0
- * @param[in] profile The profile handle
- * @param[out] type The cellular pdn type
- * @return @c 0 on success, otherwise negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not Supported
-*/
-int connection_profile_get_cellular_roam_pdn_type(connection_profile_h profile, connection_cellular_pdn_type_e* type);
-
-/**
- * @brief Checks wheter the connection is in roaming state.
- * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] profile The profile handle
- * @param[out] is_roaming @c true if the cellular is roaming, otherwise @c false if it is not roaming.
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
-*/
-int connection_profile_is_cellular_roaming(connection_profile_h profile, bool* is_roaming);
-
-/**
- * @brief Checks whether the profile is hidden.
- * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] profile The profile handle
- * @param[out] is_hidden @c ture if the profile is in hidden, otherwise @c false if the profile is not hidden.
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
-*/
-int connection_profile_is_cellular_hidden(connection_profile_h profile, bool* is_hidden);
-
-/**
- * @brief Checks whether the profile is editable.
- * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] profile The profile handle
- * @param[out] is_editable @c true if the profile is editable, otherwise @c false if the profile is not editable.
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
-*/
-int connection_profile_is_cellular_editable(connection_profile_h profile, bool* is_editable);
-
-/**
- * @brief Checks whether the profile is default.
- * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] profile The profile handle
- * @param[out] is_default @c true if the profile is default, otherwise @c false if the profile is not default.
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
-*/
-int connection_profile_is_cellular_default(connection_profile_h profile, bool* is_default);
-
-/**
- * @brief Sets the service type.
- * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] profile The profile handle
- * @param[in] service_type The type of cellular service
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
- * @see connection_update_profile()
-*/
-int connection_profile_set_cellular_service_type(connection_profile_h profile, connection_cellular_service_type_e service_type);
-
-/**
- * @brief Sets the APN (Access Point Name).
- * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] profile The profile handle
- * @param[in] apn The name of APN
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
- * @see connection_update_profile()
-*/
-int connection_profile_set_cellular_apn(connection_profile_h profile, const char* apn);
-
-/**
- * @brief Sets the Authentication information.
- * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] profile The profile handle
- * @param[in] type The type of the authentication
- * @param[in] user_name The user name
- * @param[in] password The password
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
- * @see connection_update_profile()
-*/
-int connection_profile_set_cellular_auth_info(connection_profile_h profile, connection_cellular_auth_type_e type, const char* user_name, const char* password);
-
-/**
- * @brief Sets the home URL.
- * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
- * @param[in] profile The profile handle
- * @param[in] home_url The home URL
- * @return @c 0 on success, otherwise a negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
- * @see connection_update_profile()
-*/
-int connection_profile_set_cellular_home_url(connection_profile_h profile, const char* home_url);
-
-/**
- * @brief Sets the cellular pdn type.
- * @since_tizen 3.0
- * @param[in] profile The profile handle
- * @param[in] type The cellular pdn type
- * @return @c 0 on success, otherwise negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not Supported
-*/
-int connection_profile_set_cellular_pdn_type(connection_profile_h profile, connection_cellular_pdn_type_e type);
-
-/**
- * @brief Sets the cellular roam pdn type.
- * @since_tizen 3.0
- * @param[in] profile The profile handle
- * @param[in] type The cellular pdn type
- * @return @c 0 on success, otherwise negative error value
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
- * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission Denied
- * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not Supported
-*/
-int connection_profile_set_cellular_roam_pdn_type(connection_profile_h profile, connection_cellular_pdn_type_e type);
-
-/**
-* @}
-*/
-
-
-#ifdef __cplusplus
-}
-
-#endif
-
-#endif /* __TIZEN_NETWORK_CONNECTION_PROFILE_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2011-2013 Samsung Electronics Co., Ltd All Rights Reserved
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef __TIZEN_NETWORK_CONNECTION_PROFILE_H__
+#define __TIZEN_NETWORK_CONNECTION_PROFILE_H__
+
+#include <tizen.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * @file connection_profile.h
+ */
+
+/**
+* @addtogroup CAPI_NETWORK_CONNECTION_WIFI_PROFILE_MODULE
+* @{
+*/
+
+/**
+ * @brief Enumeration for security type of Wi-Fi.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+*/
+typedef enum
+{
+ CONNECTION_WIFI_SECURITY_TYPE_NONE = 0, /**< Security disabled */
+ CONNECTION_WIFI_SECURITY_TYPE_WEP = 1, /**< WEP */
+ CONNECTION_WIFI_SECURITY_TYPE_WPA_PSK = 2, /**< WPA-PSK */
+ CONNECTION_WIFI_SECURITY_TYPE_WPA2_PSK = 3, /**< WPA2-PSK */
+ CONNECTION_WIFI_SECURITY_TYPE_EAP = 4, /**< EAP */
+} connection_wifi_security_type_e;
+
+/**
+ * @brief Enumeration for encryption modes.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+*/
+typedef enum
+{
+ CONNECTION_WIFI_ENCRYPTION_TYPE_NONE = 0, /**< Encryption disabled */
+ CONNECTION_WIFI_ENCRYPTION_TYPE_WEP = 1, /**< WEP */
+ CONNECTION_WIFI_ENCRYPTION_TYPE_TKIP = 2, /**< TKIP */
+ CONNECTION_WIFI_ENCRYPTION_TYPE_AES = 3, /**< AES */
+ CONNECTION_WIFI_ENCRYPTION_TYPE_TKIP_AES_MIXED = 4, /**< TKIP and AES are both supported */
+} connection_wifi_encryption_type_e;
+
+/**
+* @}
+*/
+
+
+/**
+* @addtogroup CAPI_NETWORK_CONNECTION_CELLULAR_PROFILE_MODULE
+* @{
+*/
+
+/**
+ * @brief Enumeration for cellular service type.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+*/
+typedef enum
+{
+ CONNECTION_CELLULAR_SERVICE_TYPE_UNKNOWN = 0, /**< Unknown */
+ CONNECTION_CELLULAR_SERVICE_TYPE_INTERNET = 1, /**< Internet */
+ CONNECTION_CELLULAR_SERVICE_TYPE_MMS = 2, /**< MMS */
+ CONNECTION_CELLULAR_SERVICE_TYPE_PREPAID_INTERNET = 3, /**< Prepaid internet */
+ CONNECTION_CELLULAR_SERVICE_TYPE_PREPAID_MMS = 4, /**< Prepaid MMS */
+ CONNECTION_CELLULAR_SERVICE_TYPE_TETHERING = 5, /**< Tethering */
+ CONNECTION_CELLULAR_SERVICE_TYPE_APPLICATION = 6, /**< Specific application */
+} connection_cellular_service_type_e;
+
+/**
+ * @brief Enumeration for cellular pdn type.
+ * @since_tizen 3.0
+ */
+typedef enum
+{
+ CONNECTION_CELLULAR_PDN_TYPE_UNKNOWN = 0,
+ CONNECTION_CELLULAR_PDN_TYPE_IPV4 = 1,
+ CONNECTION_CELLULAR_PDN_TYPE_IPV6 = 2,
+ CONNECTION_CELLULAR_PDN_TYPE_IPV4_IPv6 = 3,
+} connection_cellular_pdn_type_e;
+
+/**
+ * @brief Enumeration for cellular authentication type.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+*/
+typedef enum
+{
+ CONNECTION_CELLULAR_AUTH_TYPE_NONE = 0, /**< No authentication */
+ CONNECTION_CELLULAR_AUTH_TYPE_PAP = 1, /**< PAP authentication */
+ CONNECTION_CELLULAR_AUTH_TYPE_CHAP = 2, /**< CHAP authentication */
+} connection_cellular_auth_type_e;
+
+/**
+* @}
+*/
+
+
+/**
+* @addtogroup CAPI_NETWORK_CONNECTION_PROFILE_MODULE
+* @{
+*/
+
+/**
+ * @brief The profile handle.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+*/
+typedef void* connection_profile_h;
+
+/**
+ * @brief Enumeration for profile state type.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+*/
+typedef enum
+{
+ CONNECTION_PROFILE_STATE_DISCONNECTED = 0, /**< Disconnected state */
+ CONNECTION_PROFILE_STATE_ASSOCIATION = 1, /**< Association state */
+ CONNECTION_PROFILE_STATE_CONFIGURATION = 2, /**< Configuration state */
+ CONNECTION_PROFILE_STATE_CONNECTED = 3, /**< Connected state */
+} connection_profile_state_e;
+
+/**
+ * @brief Enumeration for address family.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+*/
+typedef enum
+{
+ CONNECTION_ADDRESS_FAMILY_IPV4 = 0, /**< IPV4 Address type */
+ CONNECTION_ADDRESS_FAMILY_IPV6 = 1, /**< IPV6 Address type */
+} connection_address_family_e;
+
+/**
+ * @brief Enumeration for IP configuration type.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+*/
+typedef enum
+{
+ CONNECTION_IP_CONFIG_TYPE_NONE = 0, /**< Not defined */
+ CONNECTION_IP_CONFIG_TYPE_STATIC = 1, /**< Manual IP configuration */
+ CONNECTION_IP_CONFIG_TYPE_DYNAMIC = 2, /**< Config IP using DHCP client*/
+ CONNECTION_IP_CONFIG_TYPE_AUTO = 3, /**< Config IP from Auto IP pool (169.254/16). Later with DHCP client, if available */
+ CONNECTION_IP_CONFIG_TYPE_FIXED = 4, /**< Indicates an IP address that can not be modified */
+} connection_ip_config_type_e;
+
+/**
+ * @brief Enumeration for proxy method type.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+*/
+typedef enum
+{
+ CONNECTION_PROXY_TYPE_DIRECT = 0, /**< Direct connection */
+ CONNECTION_PROXY_TYPE_AUTO = 1, /**< Auto configuration(Use PAC file). If URL property is not set, DHCP/WPAD auto-discover will be tried */
+ CONNECTION_PROXY_TYPE_MANUAL = 2, /**< Manual configuration */
+} connection_proxy_type_e;
+
+/**
+ * @brief Enumeration for network connection type.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+*/
+typedef enum{
+ CONNECTION_PROFILE_TYPE_CELLULAR = 0, /**< Cellular type */
+ CONNECTION_PROFILE_TYPE_WIFI = 1, /**< Wi-Fi type */
+ CONNECTION_PROFILE_TYPE_ETHERNET = 2, /**< Ethernet type */
+ CONNECTION_PROFILE_TYPE_BT = 3, /**< Bluetooth type */
+} connection_profile_type_e;
+
+/**
+ * @brief Enumeration for DNS configuration type.
+ * @since_tizen 3.0
+*/
+typedef enum
+{
+ CONNECTION_DNS_CONFIG_TYPE_NONE = 0, /**< Not defined */
+ CONNECTION_DNS_CONFIG_TYPE_STATIC = 1, /**< Manual DNS configuration */
+ CONNECTION_DNS_CONFIG_TYPE_DYNAMIC = 2, /**< Config DNS using DHCP client*/
+} connection_dns_config_type_e;
+
+
+/**
+ * @brief Creates a profile handle.
+ * @details The profile name, which you get from connection_profile_get_name(), will include the keyword you set.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @privlevel public
+ * @privilege %http://tizen.org/privilege/network.get
+ * @remarks You must release @a profile using connection_profile_destroy().
+ * @param[in] type The type of profile\n
+ * #CONNECTION_PROFILE_TYPE_CELLULAR and #CONNECTION_PROFILE_TYPE_WIFI are supported.
+ * @param[in] keyword The keyword included in profile name
+ * @param[out] profile The handle of the profile
+ * @return @c 0 on success, otherwise negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+ * @see connection_profile_destroy()
+ * @see connection_profile_get_name()
+*/
+int connection_profile_create(connection_profile_type_e type, const char* keyword, connection_profile_h* profile);
+
+/**
+ * @brief Destroys a profile handle.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[out] profile The handle to the profile
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @see connection_profile_create()
+*/
+int connection_profile_destroy(connection_profile_h profile);
+
+/**
+ * @brief Clones a profile handle.
+ * @since_tizen 2.3
+ * @remarks You must release @a cloned_profile using connection_profile_destroy().
+ * @param[out] cloned_profile The handle of the cloned profile
+ * @param[in] origin_profile The handle of the origin profile
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @see connection_profile_destroy()
+*/
+int connection_profile_clone(connection_profile_h* cloned_profile, connection_profile_h origin_profile);
+
+/**
+ * @brief Gets the profile ID.
+ * @details The separate profiles can have the same name.
+ * So, you must use this API instead of connection_profile_get_name() if you want to get the unique identification.
+ * In case you create a profile, this value will be determined when you add the profile.
+ *
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @remarks You must release @a profile_id using free().
+ * @param[in] profile The profile handle
+ * @param[out] profile_id The ID of the profile
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @see connection_profile_get_name()
+ * @see connection_add_profile()
+*/
+int connection_profile_get_id(connection_profile_h profile, char** profile_id);
+
+/**
+ * @brief Gets the profile name.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @remarks You must release @a profile_name using free().
+ * @param[in] profile The profile handle
+ * @param[out] profile_name The name of the profile
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @see connection_profile_get_id()
+*/
+int connection_profile_get_name(connection_profile_h profile, char** profile_name);
+
+/**
+ * @brief Gets the network type.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[out] type The type of the profile
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+*/
+int connection_profile_get_type(connection_profile_h profile, connection_profile_type_e* type);
+
+/**
+ * @brief Gets the name of the network interface, e.g. eth0 and pdp0.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @remarks You must release @a interface_name using free().
+ * @param[in] profile The profile handle
+ * @param[out] interface_name The name of the network interface
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+*/
+int connection_profile_get_network_interface_name(connection_profile_h profile, char** interface_name);
+
+/**
+ * @brief Refreshes the profile information.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @privlevel public
+ * @privilege %http://tizen.org/privilege/network.get
+ * @remarks You should call this function in order to get the current information because the profile information can be changed.
+ * @param[in] profile The profile handle
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission Denied
+*/
+int connection_profile_refresh(connection_profile_h profile);
+
+/**
+ * @brief Gets the network type.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[out] state The state of the profile
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+*/
+int connection_profile_get_state(connection_profile_h profile, connection_profile_state_e* state);
+
+/**
+ * @brief Gets the IP config type.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[in] address_family The address family
+ * @param[out] type The type of the IP config
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+*/
+int connection_profile_get_ip_config_type(connection_profile_h profile, connection_address_family_e address_family, connection_ip_config_type_e* type);
+
+/**
+ * @brief Gets the IP address.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @remarks You must release @a ip_address using free().
+ * @param[in] profile The profile handle
+ * @param[in] address_family The address family
+ * @param[out] ip_address The IP address
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+*/
+int connection_profile_get_ip_address(connection_profile_h profile, connection_address_family_e address_family, char** ip_address);
+
+/**
+ * @brief Gets the Subnet Mask.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @remarks You must release @a subnet_mask using free().
+ * @param[in] profile The profile handle
+ * @param[in] address_family The address family
+ * @param[out] subnet_mask The subnet mask
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+*/
+int connection_profile_get_subnet_mask(connection_profile_h profile, connection_address_family_e address_family, char** subnet_mask);
+
+/**
+ * @brief Gets the Gateway address.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @remarks You must release @a gateway_address using free().
+ * @param[in] profile The profile handle
+ * @param[in] address_family The address family
+ * @param[out] gateway_address The gateway address
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+*/
+int connection_profile_get_gateway_address(connection_profile_h profile, connection_address_family_e address_family, char** gateway_address);
+
+/**
+ * @brief Gets the DNS address.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @remarks The allowance of the DNS address is @c 2. You must release @a dns_address using free().
+ * @param[in] profile The profile handle
+ * @param[in] order The order of DNS address \n
+ * it starts from 1, which means first DNS address.
+ * @param[in] address_family The address family
+ * @param[out] dns_address The DNS address
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+*/
+int connection_profile_get_dns_address(connection_profile_h profile, int order, connection_address_family_e address_family, char** dns_address);
+
+/**
+ * @brief Gets the Proxy type.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[out] type The type of the proxy
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+*/
+int connection_profile_get_proxy_type(connection_profile_h profile, connection_proxy_type_e* type);
+
+/**
+ * @brief Gets the Proxy address.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @remarks You must release @a proxy_address using free().
+ * @param[in] profile The profile handle
+ * @param[in] address_family The address family
+ * @param[out] proxy_address The proxy address
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+*/
+int connection_profile_get_proxy_address(connection_profile_h profile, connection_address_family_e address_family, char** proxy_address);
+
+/**
+ * @brief Sets the IP config type.
+ * @details If you set IP config type to #CONNECTION_IP_CONFIG_TYPE_STATIC,
+ * then IP address, Gateway and Subnet mask will be set to the initial value "0.0.0.0".
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[in] address_family The address family
+ * @param[in] type The type of the IP config
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+*/
+int connection_profile_set_ip_config_type(connection_profile_h profile, connection_address_family_e address_family, connection_ip_config_type_e type);
+
+/**
+ * @brief Sets the IP address.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[in] address_family The address family
+ * @param[in] ip_address The IP address.\n
+ * If you set this value to @c NULL, then the existing value will be deleted.
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @see connection_update_profile()
+*/
+int connection_profile_set_ip_address(connection_profile_h profile, connection_address_family_e address_family, const char* ip_address);
+
+/**
+ * @brief Sets the Subnet Mask.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[in] address_family The address family
+ * @param[in] subnet_mask The subnet mask. \n
+ * If you set this value to @c NULL, then the existing value will be deleted.
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @see connection_update_profile()
+*/
+int connection_profile_set_subnet_mask(connection_profile_h profile, connection_address_family_e address_family, const char* subnet_mask);
+
+/**
+ * @brief Sets the Gateway address.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[in] address_family The address family
+ * @param[in] gateway_address The gateway address. \n
+ * If you set this value to @c NULL, then the existing value will be deleted.
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @see connection_update_profile()
+*/
+int connection_profile_set_gateway_address(connection_profile_h profile, connection_address_family_e address_family, const char* gateway_address);
+
+/**
+ * @brief Sets the DNS address.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @remarks The allowance of the DNS address is @c 2.
+ * @param[in] profile The profile handle
+ * @param[in] order The order of the DNS address. \n
+ * It starts from @c 1, which means first DNS address.
+ * @param[in] address_family The address family
+ * @param[in] dns_address The DNS address; if you set this value to NULL, then the existing value will be deleted
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @see connection_update_profile()
+*/
+int connection_profile_set_dns_address(connection_profile_h profile, int order, connection_address_family_e address_family, const char* dns_address);
+
+/**
+ * @brief Sets the Proxy type.
+ * @details If you set the Proxy type to #CONNECTION_PROXY_TYPE_AUTO or #CONNECTION_PROXY_TYPE_MANUAL, then Proxy will be restored.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[in] type The type of the proxy
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @see connection_update_profile()
+*/
+int connection_profile_set_proxy_type(connection_profile_h profile, connection_proxy_type_e type);
+
+/**
+ * @brief Sets the Proxy address.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[in] address_family The address family
+ * @param[in] proxy_address The proxy address. \n
+ * if you set this value to @c NULL, then the existing value will be deleted.
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @see connection_update_profile()
+*/
+int connection_profile_set_proxy_address(connection_profile_h profile, connection_address_family_e address_family, const char* proxy_address);
+
+/**
+ * @brief Called when the state of the profile is changed.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] state The state
+ * @param[in] user_data The user data passed from the callback registration function
+ * @see connection_profile_set_state_changed_cb()
+ * @see connection_profile_unset_state_changed_cb()
+*/
+typedef void(*connection_profile_state_changed_cb)(connection_profile_state_e state, void* user_data);
+
+/**
+ * @brief Registers the callback that is called when the state of profile is changed.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[in] callback The callback function to be called
+ * @param[in] user_data The user data passed to the callback function
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @post connection_opened_cb() is invoked when the state of profile is changed.
+ * @see connection_profile_state_changed_cb()
+ * @see connection_profile_unset_state_changed_cb()
+*/
+int connection_profile_set_state_changed_cb(connection_profile_h profile, connection_profile_state_changed_cb callback, void* user_data);
+
+/**
+ * @brief Unregisters the callback that is called when the state of profile is changed.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @see connection_profile_state_changed_cb()
+ * @see connection_profile_set_state_changed_cb()
+*/
+int connection_profile_unset_state_changed_cb(connection_profile_h profile);
+
+/**
+* @}
+*/
+
+
+/**
+* @addtogroup CAPI_NETWORK_CONNECTION_WIFI_PROFILE_MODULE
+* @{
+*/
+
+/**
+ * @brief Gets the ESSID (Extended Service Set Identifier).
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @remarks You must release @a essid using free().
+ * @param[in] profile The profile handle
+ * @param[out] essid The ESSID
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+*/
+int connection_profile_get_wifi_essid(connection_profile_h profile, char** essid);
+
+/**
+ * @brief Gets the BSSID (Basic Service Set Identifier).
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @remarks You must release @a bssid using free().
+ * @param[in] profile The profile handle
+ * @param[out] bssid The BSSID
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+*/
+int connection_profile_get_wifi_bssid(connection_profile_h profile, char** bssid);
+
+/**
+ * @brief Gets the RSSI.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[out] rssi The RSSI
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+*/
+int connection_profile_get_wifi_rssi(connection_profile_h profile, int* rssi);
+
+/**
+ * @brief Gets the frequency (MHz).
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[out] frequency The frequency
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+*/
+int connection_profile_get_wifi_frequency(connection_profile_h profile, int* frequency);
+
+/**
+ * @brief Gets the max speed (Mbps).
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[out] max_speed The max speed
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+*/
+int connection_profile_get_wifi_max_speed(connection_profile_h profile, int* max_speed);
+
+/**
+ * @brief Gets the security mode of Wi-Fi.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[out] type The type of Wi-Fi security
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+*/
+int connection_profile_get_wifi_security_type(connection_profile_h profile, connection_wifi_security_type_e* type);
+
+/**
+ * @brief Gets the security mode of Wi-Fi.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[out] type The type of Wi-Fi security
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+*/
+int connection_profile_get_wifi_encryption_type(connection_profile_h profile, connection_wifi_encryption_type_e* type);
+
+/**
+ * @brief Checks whether passphrase is required.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @remarks This function is not valid if security type is #CONNECTION_WIFI_SECURITY_TYPE_EAP.
+ * @param[in] profile The profile handle
+ * @param[out] required @c true if a passphrase is required, otherwise @c false if a passphrase is not required.
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+*/
+int connection_profile_is_wifi_passphrase_required(connection_profile_h profile, bool* required);
+
+/**
+ * @brief Sets the passphrase of the Wi-Fi WPA.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[in] passphrase The passphrase of Wi-Fi security
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+ * @see connection_update_profile()
+*/
+int connection_profile_set_wifi_passphrase(connection_profile_h profile, const char* passphrase);
+
+/**
+ * @brief Checks whether the WPS (Wi-Fi Protected Setup) is supported.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @remarks If WPS is supported, you can connect the access point with WPS by wifi_connect_with_wps().
+ * @param[in] profile The profile handle
+ * @param[out] supported @c true if WPS is supported, otherwise @c false if WPS is not supported.
+ * @return @c 0 on success, otherwise negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+*/
+int connection_profile_is_wifi_wps_supported(connection_profile_h profile, bool* supported);
+
+/**
+* @}
+*/
+
+
+/**
+* @addtogroup CAPI_NETWORK_CONNECTION_CELLULAR_PROFILE_MODULE
+* @{
+*/
+
+/**
+ * @brief Gets the service type.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[out] type The type of the cellular service
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+*/
+int connection_profile_get_cellular_service_type(connection_profile_h profile, connection_cellular_service_type_e* type);
+
+/**
+ * @brief Gets the APN (access point name).
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @remarks You must release @a apn using free().
+ * @param[in] profile The profile handle
+ * @param[out] apn The name of the APN
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+*/
+int connection_profile_get_cellular_apn(connection_profile_h profile, char** apn);
+
+/**
+ * @brief Gets the authentication information.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @remarks You must release @a user_name and @a password using free().
+ * @param[in] profile The profile handle
+ * @param[out] type The type of the authentication
+ * @param[out] user_name The user name
+ * @param[out] password The password
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+*/
+int connection_profile_get_cellular_auth_info(connection_profile_h profile, connection_cellular_auth_type_e* type, char** user_name, char** password);
+
+/**
+ * @brief Gets the home URL.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @remarks You must release @a home_url using free().
+ * @param[in] profile The profile handle
+ * @param[out] home_url The home URL
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+*/
+int connection_profile_get_cellular_home_url(connection_profile_h profile, char** home_url);
+
+/**
+ * @brief Gets the cellular pdn type.
+ * @since_tizen 3.0
+ * @param[in] profile The profile handle
+ * @param[out] type The cellular pdn type
+ * @return @c 0 on success, otherwise negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not Supported
+*/
+int connection_profile_get_cellular_pdn_type(connection_profile_h profile, connection_cellular_pdn_type_e* type);
+
+/**
+ * @brief Gets the cellular roam pdn type.
+ * @since_tizen 3.0
+ * @param[in] profile The profile handle
+ * @param[out] type The cellular pdn type
+ * @return @c 0 on success, otherwise negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not Supported
+*/
+int connection_profile_get_cellular_roam_pdn_type(connection_profile_h profile, connection_cellular_pdn_type_e* type);
+
+/**
+ * @brief Checks wheter the connection is in roaming state.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[out] is_roaming @c true if the cellular is roaming, otherwise @c false if it is not roaming.
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+*/
+int connection_profile_is_cellular_roaming(connection_profile_h profile, bool* is_roaming);
+
+/**
+ * @brief Checks whether the profile is hidden.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[out] is_hidden @c ture if the profile is in hidden, otherwise @c false if the profile is not hidden.
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+*/
+int connection_profile_is_cellular_hidden(connection_profile_h profile, bool* is_hidden);
+
+/**
+ * @brief Checks whether the profile is editable.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[out] is_editable @c true if the profile is editable, otherwise @c false if the profile is not editable.
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+*/
+int connection_profile_is_cellular_editable(connection_profile_h profile, bool* is_editable);
+
+/**
+ * @brief Checks whether the profile is default.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[out] is_default @c true if the profile is default, otherwise @c false if the profile is not default.
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+*/
+int connection_profile_is_cellular_default(connection_profile_h profile, bool* is_default);
+
+/**
+ * @brief Sets the service type.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[in] service_type The type of cellular service
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+ * @see connection_update_profile()
+*/
+int connection_profile_set_cellular_service_type(connection_profile_h profile, connection_cellular_service_type_e service_type);
+
+/**
+ * @brief Sets the APN (Access Point Name).
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[in] apn The name of APN
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+ * @see connection_update_profile()
+*/
+int connection_profile_set_cellular_apn(connection_profile_h profile, const char* apn);
+
+/**
+ * @brief Sets the Authentication information.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[in] type The type of the authentication
+ * @param[in] user_name The user name
+ * @param[in] password The password
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+ * @see connection_update_profile()
+*/
+int connection_profile_set_cellular_auth_info(connection_profile_h profile, connection_cellular_auth_type_e type, const char* user_name, const char* password);
+
+/**
+ * @brief Sets the home URL.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[in] home_url The home URL
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+ * @see connection_update_profile()
+*/
+int connection_profile_set_cellular_home_url(connection_profile_h profile, const char* home_url);
+
+/**
+ * @brief Sets the cellular pdn type.
+ * @since_tizen 3.0
+ * @param[in] profile The profile handle
+ * @param[in] type The cellular pdn type
+ * @return @c 0 on success, otherwise negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not Supported
+*/
+int connection_profile_set_cellular_pdn_type(connection_profile_h profile, connection_cellular_pdn_type_e type);
+
+/**
+ * @brief Sets the cellular roam pdn type.
+ * @since_tizen 3.0
+ * @param[in] profile The profile handle
+ * @param[in] type The cellular pdn type
+ * @return @c 0 on success, otherwise negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission Denied
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not Supported
+*/
+int connection_profile_set_cellular_roam_pdn_type(connection_profile_h profile, connection_cellular_pdn_type_e type);
+
+/**
+* @brief Gets the DNS config type.
+* @since_tizen @if TV 3.0 @endif
+* @param[in] profile The handle of profile
+* @param[in] address_family The address family
+* @param[out] type The type of DNS config
+* @return @c 0 on success, otherwise negative error value.
+* @retval #CONNECTION_ERROR_NONE Successful
+* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+* @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+* @retval #CONNECTION_ERROR_NOT_SUPPORTED Not Supported
+*/
+int connection_profile_get_dns_config_type(connection_profile_h profile,
+ connection_address_family_e address_family,
+ connection_dns_config_type_e* type);
+
+/**
+* @brief Sets the DNS config type.
+* @since_tizen @if TV 3.0 @endif
+* @param[in] profile The handle of profile
+* @param[in] address_family The address family
+* @param[in] type The type of DNS config
+* @return @c 0 on success, otherwise negative error value.
+* @retval #CONNECTION_ERROR_NONE Successful
+* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+* @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+* @retval #CONNECTION_ERROR_NOT_SUPPORTED Not Supported
+* @see connection_update_profile()
+*/
+int connection_profile_set_dns_config_type(connection_profile_h profile,
+ connection_address_family_e address_family,
+ connection_dns_config_type_e type);
+
+/**
+* @brief Gets the Prefix Length of IPv6.
+* @since_tizen @if TV 3.0 @endif
+* @param[in] profile The handle of profile
+* @param[out] prefix_len The prefix length
+* @return @c 0 on success, otherwise negative error value.
+* @retval #CONNECTION_ERROR_NONE Successful
+* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+* @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+* @retval #CONNECTION_ERROR_NOT_SUPPORTED Not Supported
+*/
+int connection_profile_get_prefix_length(connection_profile_h profile,
+ unsigned char* prefix_length);
+
+/**
+* @brief Sets the Prefix Length of IPv6.
+* @since_tizen @if TV 3.0 @endif
+* @param[in] profile The handle of profile
+* @param[in] prefix_length The prefix len. If you set this value to NULL, then the existing value will be deleted.
+* @return @c 0 on success, otherwise negative error value.
+* @retval #CONNECTION_ERROR_NONE Successful
+* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+* @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+* @retval #CONNECTION_ERROR_NOT_SUPPORTED Not Supported
+* @see connection_update_profile()
+*/
+int connection_profile_set_prefix_length(connection_profile_h profile,
+ unsigned char prefix_length);
+/**
+* @}
+*/
+
+
+#ifdef __cplusplus
+}
+
+#endif
+
+#endif /* __TIZEN_NETWORK_CONNECTION_PROFILE_H__ */
projects / platform / core / api / connection.git / commitdiff