The PMC module is used by perf_events, oprofile and watchdogs.
Signed-off-by: Zhigang Lu <zlu@tilera.com>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
config GENERIC_TIME_VSYSCALL
def_bool y
+# Enable PMC if PERF_EVENTS, OPROFILE, or WATCHPOINTS are enabled.
+config USE_PMC
+ bool
+
# FIXME: tilegx can implement a more efficient rwsem.
config RWSEM_GENERIC_SPINLOCK
def_bool y
--- /dev/null
+/*
+ * Copyright 2014 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ASM_TILE_PMC_H
+#define _ASM_TILE_PMC_H
+
+#include <linux/ptrace.h>
+
+#define TILE_BASE_COUNTERS 2
+
+/* Bitfields below are derived from SPR PERF_COUNT_CTL*/
+#ifndef __tilegx__
+/* PERF_COUNT_CTL on TILEPro */
+#define TILE_CTL_EXCL_USER (1 << 7) /* exclude user level */
+#define TILE_CTL_EXCL_KERNEL (1 << 8) /* exclude kernel level */
+#define TILE_CTL_EXCL_HV (1 << 9) /* exclude hypervisor level */
+
+#define TILE_SEL_MASK 0x7f /* 7 bits for event SEL,
+ COUNT_0_SEL */
+#define TILE_PLM_MASK 0x780 /* 4 bits priv level msks,
+ COUNT_0_MASK*/
+#define TILE_EVENT_MASK (TILE_SEL_MASK | TILE_PLM_MASK)
+
+#else /* __tilegx__*/
+/* PERF_COUNT_CTL on TILEGx*/
+#define TILE_CTL_EXCL_USER (1 << 10) /* exclude user level */
+#define TILE_CTL_EXCL_KERNEL (1 << 11) /* exclude kernel level */
+#define TILE_CTL_EXCL_HV (1 << 12) /* exclude hypervisor level */
+
+#define TILE_SEL_MASK 0x3f /* 6 bits for event SEL,
+ COUNT_0_SEL*/
+#define TILE_BOX_MASK 0x1c0 /* 3 bits box msks,
+ COUNT_0_BOX */
+#define TILE_PLM_MASK 0x3c00 /* 4 bits priv level msks,
+ COUNT_0_MASK */
+#define TILE_EVENT_MASK (TILE_SEL_MASK | TILE_BOX_MASK | TILE_PLM_MASK)
+#endif /* __tilegx__*/
+
+/* Takes register and fault number. Returns error to disable the interrupt. */
+typedef int (*perf_irq_t)(struct pt_regs *, int);
+
+int userspace_perf_handler(struct pt_regs *regs, int fault);
+
+perf_irq_t reserve_pmc_hardware(perf_irq_t new_perf_irq);
+void release_pmc_hardware(void);
+
+unsigned long pmc_get_overflow(void);
+void pmc_ack_overflow(unsigned long status);
+
+void unmask_pmc_interrupts(void);
+void mask_pmc_interrupts(void);
+
+#endif /* _ASM_TILE_PMC_H */
else
obj-$(CONFIG_PCI) += pci.o
endif
+obj-$(CONFIG_USE_PMC) += pmc.o
obj-$(CONFIG_TILE_USB) += usb.o
obj-$(CONFIG_TILE_HVGLUE_TRACE) += hvglue_trace.o
obj-$(CONFIG_FUNCTION_TRACER) += ftrace.o mcount_64.o
movei r3, 0
}
.else
- .ifc \c_routine, op_handle_perf_interrupt
+ .ifc \c_routine, handle_perf_interrupt
{
mfspr r2, PERF_COUNT_STS
movei r3, -1 /* not used, but set for consistency */
}
.else
- .ifc \c_routine, op_handle_aux_perf_interrupt
+ .ifc \c_routine, handle_perf_interrupt
{
mfspr r2, AUX_PERF_COUNT_STS
movei r3, -1 /* not used, but set for consistency */
/* Include .intrpt array of interrupt vectors */
.section ".intrpt", "ax"
-#define op_handle_perf_interrupt bad_intr
-#define op_handle_aux_perf_interrupt bad_intr
+#ifndef CONFIG_USE_PMC
+#define handle_perf_interrupt bad_intr
+#endif
#ifndef CONFIG_HARDWALL
#define do_hardwall_trap bad_intr
int_hand INT_IDN_AVAIL, IDN_AVAIL, bad_intr
int_hand INT_UDN_AVAIL, UDN_AVAIL, bad_intr
int_hand INT_PERF_COUNT, PERF_COUNT, \
- op_handle_perf_interrupt, handle_nmi
+ handle_perf_interrupt, handle_nmi
int_hand INT_INTCTRL_3, INTCTRL_3, bad_intr
#if CONFIG_KERNEL_PL == 2
dc_dispatch INT_INTCTRL_2, INTCTRL_2
int_hand INT_SN_CPL, SN_CPL, bad_intr
int_hand INT_DOUBLE_FAULT, DOUBLE_FAULT, do_trap
int_hand INT_AUX_PERF_COUNT, AUX_PERF_COUNT, \
- op_handle_aux_perf_interrupt, handle_nmi
+ handle_perf_interrupt, handle_nmi
/* Synthetic interrupt delivered only by the simulator */
int_hand INT_BREAKPOINT, BREAKPOINT, do_breakpoint
.ifc \c_routine, do_trap
mfspr r2, GPV_REASON
.else
- .ifc \c_routine, op_handle_perf_interrupt
+ .ifc \c_routine, handle_perf_interrupt
mfspr r2, PERF_COUNT_STS
.else
- .ifc \c_routine, op_handle_aux_perf_interrupt
+ .ifc \c_routine, handle_perf_interrupt
mfspr r2, AUX_PERF_COUNT_STS
.endif
.endif
.global intrpt_start
intrpt_start:
-#define op_handle_perf_interrupt bad_intr
-#define op_handle_aux_perf_interrupt bad_intr
+#ifndef CONFIG_USE_PMC
+#define handle_perf_interrupt bad_intr
+#endif
#ifndef CONFIG_HARDWALL
#define do_hardwall_trap bad_intr
#endif
int_hand INT_IPI_0, IPI_0, bad_intr
int_hand INT_PERF_COUNT, PERF_COUNT, \
- op_handle_perf_interrupt, handle_nmi
+ handle_perf_interrupt, handle_nmi
int_hand INT_AUX_PERF_COUNT, AUX_PERF_COUNT, \
- op_handle_perf_interrupt, handle_nmi
+ handle_perf_interrupt, handle_nmi
int_hand INT_INTCTRL_3, INTCTRL_3, bad_intr
#if CONFIG_KERNEL_PL == 2
dc_dispatch INT_INTCTRL_2, INTCTRL_2
--- /dev/null
+/*
+ * Copyright 2014 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/errno.h>
+#include <linux/spinlock.h>
+#include <linux/module.h>
+#include <linux/atomic.h>
+#include <linux/interrupt.h>
+
+#include <asm/processor.h>
+#include <asm/pmc.h>
+
+perf_irq_t perf_irq = NULL;
+int handle_perf_interrupt(struct pt_regs *regs, int fault)
+{
+ int retval;
+
+ if (!perf_irq)
+ panic("Unexpected PERF_COUNT interrupt %d\n", fault);
+
+ nmi_enter();
+ retval = perf_irq(regs, fault);
+ nmi_exit();
+ return retval;
+}
+
+/* Reserve PMC hardware if it is available. */
+perf_irq_t reserve_pmc_hardware(perf_irq_t new_perf_irq)
+{
+ return cmpxchg(&perf_irq, NULL, new_perf_irq);
+}
+EXPORT_SYMBOL(reserve_pmc_hardware);
+
+/* Release PMC hardware. */
+void release_pmc_hardware(void)
+{
+ perf_irq = NULL;
+}
+EXPORT_SYMBOL(release_pmc_hardware);
+
+
+/*
+ * Get current overflow status of each performance counter,
+ * and auxiliary performance counter.
+ */
+unsigned long
+pmc_get_overflow(void)
+{
+ unsigned long status;
+
+ /*
+ * merge base+aux into a single vector
+ */
+ status = __insn_mfspr(SPR_PERF_COUNT_STS);
+ status |= __insn_mfspr(SPR_AUX_PERF_COUNT_STS) << TILE_BASE_COUNTERS;
+ return status;
+}
+
+/*
+ * Clear the status bit for the corresponding counter, if written
+ * with a one.
+ */
+void
+pmc_ack_overflow(unsigned long status)
+{
+ /*
+ * clear overflow status by writing ones
+ */
+ __insn_mtspr(SPR_PERF_COUNT_STS, status);
+ __insn_mtspr(SPR_AUX_PERF_COUNT_STS, status >> TILE_BASE_COUNTERS);
+}
+
+/*
+ * The perf count interrupts are masked and unmasked explicitly,
+ * and only here. The normal irq_enable() does not enable them,
+ * and irq_disable() does not disable them. That lets these
+ * routines drive the perf count interrupts orthogonally.
+ *
+ * We also mask the perf count interrupts on entry to the perf count
+ * interrupt handler in assembly code, and by default unmask them
+ * again (with interrupt critical section protection) just before
+ * returning from the interrupt. If the perf count handler returns
+ * a non-zero error code, then we don't re-enable them before returning.
+ *
+ * For Pro, we rely on both interrupts being in the same word to update
+ * them atomically so we never have one enabled and one disabled.
+ */
+
+#if CHIP_HAS_SPLIT_INTR_MASK()
+# if INT_PERF_COUNT < 32 || INT_AUX_PERF_COUNT < 32
+# error Fix assumptions about which word PERF_COUNT interrupts are in
+# endif
+#endif
+
+static inline unsigned long long pmc_mask(void)
+{
+ unsigned long long mask = 1ULL << INT_PERF_COUNT;
+ mask |= 1ULL << INT_AUX_PERF_COUNT;
+ return mask;
+}
+
+void unmask_pmc_interrupts(void)
+{
+ interrupt_mask_reset_mask(pmc_mask());
+}
+
+void mask_pmc_interrupts(void)
+{
+ interrupt_mask_set_mask(pmc_mask());
+}
projects / platform / kernel / linux-starfive.git / commitdiff