moved here from ../../lib/

diff --git a/include/curl/multi.h b/include/curl/multi.h
new file mode 100644 (file)
index 0000000..42fa1dd
--- /dev/null
+++ b/include/curl/multi.h
@@ -0,0 +1,189 @@
+#ifndef __CURL_MULTI_H
+#define __CURL_MULTI_H
+/*****************************************************************************
+ *                                  _   _ ____  _     
+ *  Project                     ___| | | |  _ \| |    
+ *                             / __| | | | |_) | |    
+ *                            | (__| |_| |  _ <| |___ 
+ *                             \___|\___/|_| \_\_____|
+ *
+ * Copyright (C) 1998 - 2002, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * In order to be useful for every potential user, curl and libcurl are
+ * dual-licensed under the MPL and the MIT/X-derivate licenses.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the MPL or the MIT/X-derivate
+ * licenses. You may pick one of these licenses.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ * $Id$
+ *****************************************************************************/
+/*
+  This is meant to be the "external" header file. Don't give away any
+  internals here!
+
+  This document presents a mixture of ideas from at least:
+  - Daniel Stenberg
+  - Steve Dekorte
+  - Sterling Hughes
+  - Ben Greear
+
+  -------------------------------------------
+  GOALS
+
+  o Enable a "pull" interface. The application that uses libcurl decides where
+    and when to ask libcurl to get/send data.
+
+  o Enable multiple simultaneous transfers in the same thread without making it
+    complicated for the application.
+
+  o Enable the application to select() on its own file descriptors and curl's
+    file descriptors simultaneous easily.
+  
+  Example sources using this interface is here: ../multi/
+
+*/
+#ifdef HAVE_SYS_SOCKET_H
+#include <sys/socket.h>
+#endif
+#if defined(WIN32) && !defined(__GNUC__) || defined(__MINGW32__)
+#include <winsock.h>
+#endif
+
+#include <curl/curl.h>
+
+typedef void CURLM;
+
+typedef enum {
+  CURLM_CALL_MULTI_PERFORM=-1, /* please call curl_multi_perform() soon */
+  CURLM_OK,
+  CURLM_BAD_HANDLE,      /* the passed-in handle is not a valid CURLM handle */
+  CURLM_BAD_EASY_HANDLE, /* an easy handle was not good/valid */
+  CURLM_OUT_OF_MEMORY,   /* if you ever get this, you're in deep sh*t */
+  CURLM_INTERNAL_ERROR,  /* this is a libcurl bug */
+  CURLM_LAST
+} CURLMcode;
+
+typedef enum {
+  CURLMSG_NONE, /* first, not used */
+  CURLMSG_DONE, /* This easy handle has completed. 'whatever' points to
+                   the CURLcode of the transfer */
+  CURLMSG_LAST /* last, not used */
+} CURLMSG;
+
+struct CURLMsg {
+  CURLMSG msg;       /* what this message means */
+  CURL *easy_handle; /* the handle it concerns */
+  union {
+    void *whatever;    /* message-specific data */
+    CURLcode result;   /* return code for transfer */
+  } data;
+};
+typedef struct CURLMsg CURLMsg;
+
+/*
+ * Name:    curl_multi_init()
+ *
+ * Desc:    inititalize multi-style curl usage
+ * Returns: a new CURLM handle to use in all 'curl_multi' functions.
+ */
+CURLM *curl_multi_init(void);
+
+/*
+ * Name:    curl_multi_add_handle()
+ *
+ * Desc:    add a standard curl handle to the multi stack
+ * Returns: CURLMcode type, general multi error code.
+ */
+CURLMcode curl_multi_add_handle(CURLM *multi_handle,
+                                CURL *curl_handle);
+
+ /*
+  * Name:    curl_multi_remove_handle()
+  *
+  * Desc:    removes a curl handle from the multi stack again
+  * Returns: CURLMcode type, general multi error code.
+  */
+CURLMcode curl_multi_remove_handle(CURLM *multi_handle,
+                                   CURL *curl_handle);
+
+ /*
+  * Name:    curl_multi_fdset()
+  *
+  * Desc:    Ask curl for its fd_set sets. The app can use these to select() or
+  *          poll() on. We want curl_multi_perform() called as soon as one of
+  *          them are ready.
+  * Returns: CURLMcode type, general multi error code.
+  */
+CURLMcode curl_multi_fdset(CURLM *multi_handle,
+                           fd_set *read_fd_set,
+                           fd_set *write_fd_set,
+                           fd_set *exc_fd_set,
+                           int *max_fd);
+
+ /*
+  * Name:    curl_multi_perform()
+  *
+  * Desc:    When the app thinks there's data available for curl it calls this
+  *          function to read/write whatever there is right now. This returns
+  *          as soon as the reads and writes are done. This function does not
+  *          require that there actually is data available for reading or that
+  *          data can be written, it can be called just in case. It returns
+  *          the number of handles that still transfer data in the second
+  *          argument's integer-pointer.
+  *
+  * Returns: CURLMcode type, general multi error code. *NOTE* that this only
+  *          returns errors etc regarding the whole multi stack. There might
+  *          still have occurred problems on invidual transfers even when this
+  *          returns OK.
+  */
+CURLMcode curl_multi_perform(CURLM *multi_handle,
+                             int *running_handles);
+
+ /*
+  * Name:    curl_multi_cleanup()
+  *
+  * Desc:    Cleans up and removes a whole multi stack. It does not free or
+  *          touch any individual easy handles in any way. We need to define
+  *          in what state those handles will be if this function is called
+  *          in the middle of a transfer.
+  * Returns: CURLMcode type, general multi error code.
+  */
+CURLMcode curl_multi_cleanup(CURLM *multi_handle);
+
+/*
+ * Name:    curl_multi_info_read()
+ *
+ * Desc:    Ask the multi handle if there's any messages/informationals from
+ *          the individual transfers. Messages include informationals such as
+ *          error code from the transfer or just the fact that a transfer is
+ *          completed. More details on these should be written down as well.
+ *
+ *          Repeated calls to this function will return a new struct each
+ *          time, until a special "end of msgs" struct is returned as a signal
+ *          that there is no more to get at this point.
+ *
+ *          The data the returned pointer points to will not survive calling
+ *          curl_multi_cleanup().
+ *
+ *          The 'CURLMsg' struct is meant to be very simple and only contain
+ *          very basic informations. If more involved information is wanted,
+ *          we will provide the particular "transfer handle" in that struct
+ *          and that should/could/would be used in subsequent
+ *          curl_easy_getinfo() calls (or similar). The point being that we
+ *          must never expose complex structs to applications, as then we'll
+ *          undoubtably get backwards compatibility problems in the future.
+ *
+ * Returns: A pointer to a filled-in struct, or NULL if it failed or ran out
+ *          of structs. It also writes the number of messages left in the
+ *          queue (after this read) in the integer the second argument points
+ *          to.
+ */
+CURLMsg *curl_multi_info_read(CURLM *multi_handle,
+                              int *msgs_in_queue);
+
+#endif