ata: pata: Convert pr_*(DRV_NAME ...) to pr_fmt/pr_<level>

Commit 40d69ba029c8d5de51aaeb5358999266c482d00a
("pata_hpt{37x|3x2n}: use pr_*(DRV_NAME ...) instead of printk(KERN_* ...)")
used pr_<level>.

Add #define pr_fmt and remove DRV_NAME.
Increment driver version numbers.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
index 538ec38..6c77d68 100644 (file)
--- a/drivers/ata/pata_hpt366.c
+++ b/drivers/ata/pata_hpt366.c
@@ -14,6 +14,7 @@
  *     Look into engine reset on timeout errors. Should not be required.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <linux/kernel.h>
 #include <linux/module.h>
@@ -25,7 +26,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME       "pata_hpt366"
-#define DRV_VERSION    "0.6.10"
+#define DRV_VERSION    "0.6.11"
 
 struct hpt_clock {
        u8      xfer_mode;
@@ -160,8 +161,8 @@ static int hpt_dma_blacklisted(const struct ata_device *dev, char *modestr,
 
        while (list[i] != NULL) {
                if (!strcmp(list[i], model_num)) {
-                       pr_warning(DRV_NAME ": %s is not supported for %s.\n",
-                                  modestr, list[i]);
+                       pr_warn("%s is not supported for %s\n",
+                               modestr, list[i]);
                        return 1;
                }
                i++;

diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index 4c5b518..9620636 100644 (file)
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -14,6 +14,8 @@
  *     Look into engine reset on timeout errors. Should not be required.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/pci.h>
@@ -24,7 +26,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME       "pata_hpt37x"
-#define DRV_VERSION    "0.6.22"
+#define DRV_VERSION    "0.6.23"
 
 struct hpt_clock {
        u8      xfer_speed;
@@ -229,8 +231,8 @@ static int hpt_dma_blacklisted(const struct ata_device *dev, char *modestr,
 
        while (list[i] != NULL) {
                if (!strcmp(list[i], model_num)) {
-                       pr_warning(DRV_NAME ": %s is not supported for %s.\n",
-                                  modestr, list[i]);
+                       pr_warn("%s is not supported for %s\n",
+                               modestr, list[i]);
                        return 1;
                }
                i++;
@@ -863,8 +865,8 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
                        chip_table = &hpt372;
                        break;
                default:
-                       pr_err(DRV_NAME ": Unknown HPT366 subtype, "
-                              "please report (%d).\n", rev);
+                       pr_err("Unknown HPT366 subtype, please report (%d)\n",
+                              rev);
                        return -ENODEV;
                }
                break;
@@ -904,8 +906,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
                        *ppi = &info_hpt374_fn1;
                break;
        default:
-               pr_err(DRV_NAME ": PCI table is bogus, please report (%d).\n",
-                      dev->device);
+               pr_err("PCI table is bogus, please report (%d)\n", dev->device);
                return -ENODEV;
        }
        /* Ok so this is a chip we support */
@@ -953,7 +954,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
                u8 sr;
                u32 total = 0;
 
-               pr_warning(DRV_NAME ": BIOS has not set timing clocks.\n");
+               pr_warn("BIOS has not set timing clocks\n");
 
                /* This is the process the HPT371 BIOS is reported to use */
                for (i = 0; i < 128; i++) {
@@ -1009,7 +1010,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
                                               (f_high << 16) | f_low | 0x100);
                }
                if (adjust == 8) {
-                       pr_err(DRV_NAME ": DPLL did not stabilize!\n");
+                       pr_err("DPLL did not stabilize!\n");
                        return -ENODEV;
                }
                if (dpll == 3)
@@ -1017,7 +1018,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
                else
                        private_data = (void *)hpt37x_timings_50;
 
-               pr_info(DRV_NAME ": bus clock %dMHz, using %dMHz DPLL.\n",
+               pr_info("bus clock %dMHz, using %dMHz DPLL\n",
                        MHz[clock_slot], MHz[dpll]);
        } else {
                private_data = (void *)chip_table->clocks[clock_slot];
@@ -1032,7 +1033,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
                if (clock_slot < 2 && ppi[0] == &info_hpt370a)
                        ppi[0] = &info_hpt370a_33;
 
-               pr_info(DRV_NAME ": %s using %dMHz bus clock.\n",
+               pr_info("%s using %dMHz bus clock\n",
                        chip_table->name, MHz[clock_slot]);
        }
 

diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c
index eca68ca..765f136 100644 (file)
--- a/drivers/ata/pata_hpt3x2n.c
+++ b/drivers/ata/pata_hpt3x2n.c
@@ -15,6 +15,8 @@
  *     Work out best PLL policy
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/pci.h>
@@ -25,7 +27,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME       "pata_hpt3x2n"
-#define DRV_VERSION    "0.3.14"
+#define DRV_VERSION    "0.3.15"
 
 enum {
        HPT_PCI_FAST    =       (1 << 31),
@@ -418,7 +420,7 @@ static int hpt3x2n_pci_clock(struct pci_dev *pdev)
                u16 sr;
                u32 total = 0;
 
-               pr_warning(DRV_NAME ": BIOS clock data not set.\n");
+               pr_warn("BIOS clock data not set\n");
 
                /* This is the process the HPT371 BIOS is reported to use */
                for (i = 0; i < 128; i++) {
@@ -528,8 +530,7 @@ hpt372n:
                ppi[0] = &info_hpt372n;
                break;
        default:
-               pr_err(DRV_NAME ": PCI table is bogus, please report (%d).\n",
-                      dev->device);
+               pr_err("PCI table is bogus, please report (%d)\n", dev->device);
                return -ENODEV;
        }
 
@@ -578,11 +579,11 @@ hpt372n:
                pci_write_config_dword(dev, 0x5C, (f_high << 16) | f_low);
        }
        if (adjust == 8) {
-               pr_err(DRV_NAME ": DPLL did not stabilize!\n");
+               pr_err("DPLL did not stabilize!\n");
                return -ENODEV;
        }
 
-       pr_info(DRV_NAME ": bus clock %dMHz, using 66MHz DPLL.\n", pci_mhz);
+       pr_info("bus clock %dMHz, using 66MHz DPLL\n", pci_mhz);
 
        /*
         * Set our private data up. We only need a few flags