keymile, 8321 boards: move common definitions to km8321-common.h

First step for a cleanup of all header files for km8321 boards.

Signed-off-by: Thomas Reufer <thomas.reufer@keymile.com>
Acked-by: Kim Phillips <kim.phillips@freescale.com>
cc: Wolfgang Denk <wd@denx.de>
cc: Kim Phillips <kim.phillips@freescale.com>
cc: Valentin Longchamp <valentin.longchamp@keymile.com>
cc: Holger Brunck <holger.brunck@keymile.com>
cc: Heiko Schocher <hs@denx.de>

diff --git a/include/configs/km8321-common.h b/include/configs/km8321-common.h
new file mode 100644 (file)
index 0000000..a370a46
--- /dev/null
+++ b/include/configs/km8321-common.h
@@ -0,0 +1,140 @@
+/*
+ * Copyright (C) 2006 Freescale Semiconductor, Inc.
+ *                    Dave Liu <daveliu@freescale.com>
+ *
+ * Copyright (C) 2007 Logic Product Development, Inc.
+ *                    Peter Barada <peterb@logicpd.com>
+ *
+ * Copyright (C) 2007 MontaVista Software, Inc.
+ *                    Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * (C) Copyright 2008
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * (C) Copyright 2010
+ * Lukas Roggli, KEYMILE Ltd, lukas.roggli@keymile.com
+ *
+ * (C) Copyright 2010-2011
+ * Thomas Reufer, KEYMILE Ltd, thomas.reufer@keymile.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#ifndef __CONFIG_KM8321_COMMON_H
+#define __CONFIG_KM8321_COMMON_H
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_QE      /* Has QE */
+#define CONFIG_MPC832x /* MPC832x CPU specific */
+#define CONFIG_KM8321  /* Keymile PBEC8321 board specific */
+
+#define CONFIG_KM_DEF_NETDEV   \
+       "netdev=eth0\0"
+
+#define CONFIG_KM_DEF_ROOTPATH         \
+       "rootpath=/opt/eldk/ppc_8xx\0"
+
+/* include common defines/options for all 83xx Keymile boards */
+#include "km83xx-common.h"
+
+#define CONFIG_MISC_INIT_R
+
+/*
+ * System IO Config
+ */
+#define CONFIG_SYS_SICRL       SICRL_IRQ_CKS
+
+/*
+ * Hardware Reset Configuration Word
+ */
+#define CONFIG_SYS_HRCW_LOW (\
+       HRCWL_LCL_BUS_TO_SCB_CLK_1X1 | \
+       HRCWL_DDR_TO_SCB_CLK_2X1 | \
+       HRCWL_CSB_TO_CLKIN_2X1 | \
+       HRCWL_CORE_TO_CSB_2_5X1 | \
+       HRCWL_CE_PLL_VCO_DIV_2 | \
+       HRCWL_CE_TO_PLL_1X3)
+
+#define CONFIG_SYS_HRCW_HIGH (\
+       HRCWH_PCI_AGENT | \
+       HRCWH_PCI_ARBITER_DISABLE | \
+       HRCWH_CORE_ENABLE | \
+       HRCWH_FROM_0X00000100 | \
+       HRCWH_BOOTSEQ_DISABLE | \
+       HRCWH_SW_WATCHDOG_DISABLE | \
+       HRCWH_ROM_LOC_LOCAL_16BIT | \
+       HRCWH_BIG_ENDIAN | \
+       HRCWH_LALE_NORMAL)
+
+#define CONFIG_SYS_DDR_CS0_BNDS                0x0000007f
+#define CONFIG_SYS_DDR_SDRAM_CFG       (SDRAM_CFG_SDRAM_TYPE_DDR2 | \
+                                        SDRAM_CFG_32_BE | \
+                                        SDRAM_CFG_SREN)
+
+#define CONFIG_SYS_DDR_SDRAM_CFG2      0x00401000
+#define CONFIG_SYS_DDR_CLK_CNTL                (DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05)
+#define CONFIG_SYS_DDR_INTERVAL        ((0x064 << SDRAM_INTERVAL_BSTOPRE_SHIFT) | \
+                                (0x200 << SDRAM_INTERVAL_REFINT_SHIFT))
+
+#define CONFIG_SYS_DDR_CS0_CONFIG      (CSCONFIG_EN | CSCONFIG_AP | \
+                                        CSCONFIG_ODT_WR_CFG | \
+                                        CSCONFIG_ROW_BIT_13 | \
+                                        CSCONFIG_COL_BIT_10)
+
+#define CONFIG_SYS_DDR_MODE    0x47860252
+#define CONFIG_SYS_DDR_MODE2   0x8080c000
+
+#define CONFIG_SYS_DDR_TIMING_0        ((2 << TIMING_CFG0_MRS_CYC_SHIFT) | \
+                                (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) | \
+                                (2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) | \
+                                (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) | \
+                                (0 << TIMING_CFG0_WWT_SHIFT) | \
+                                (0 << TIMING_CFG0_RRT_SHIFT) | \
+                                (0 << TIMING_CFG0_WRT_SHIFT) | \
+                                (0 << TIMING_CFG0_RWT_SHIFT))
+
+#define CONFIG_SYS_DDR_TIMING_1        ((TIMING_CFG1_CASLAT_50) | \
+                                (2 << TIMING_CFG1_WRTORD_SHIFT) | \
+                                (2 << TIMING_CFG1_ACTTOACT_SHIFT) | \
+                                (2 << TIMING_CFG1_WRREC_SHIFT) | \
+                                (6 << TIMING_CFG1_REFREC_SHIFT) | \
+                                (2 << TIMING_CFG1_ACTTORW_SHIFT) | \
+                                (6 << TIMING_CFG1_ACTTOPRE_SHIFT) | \
+                                (2 << TIMING_CFG1_PRETOACT_SHIFT))
+
+#define CONFIG_SYS_DDR_TIMING_2        ((8 << TIMING_CFG2_FOUR_ACT_SHIFT) | \
+                                (3 << TIMING_CFG2_CKE_PLS_SHIFT) | \
+                                (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) | \
+                                (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) | \
+                                (4 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) | \
+                                (0 << TIMING_CFG2_ADD_LAT_SHIFT) | \
+                                (5 << TIMING_CFG2_CPO_SHIFT))
+
+#define CONFIG_SYS_DDR_TIMING_3        0x00000000
+
+#define CONFIG_SYS_PIGGY_BASE  0xE8000000
+#define        CONFIG_SYS_PIGGY_SIZE   128
+
+/* EEprom support */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
+
+/*
+ * Local Bus Configuration & Clock Setup
+ */
+#define CONFIG_SYS_LCRR                (LCRR_DBYP | LCRR_EADC_1 | LCRR_CLKDIV_2)
+#define CONFIG_SYS_LBC_LBCR    0x00000000
+
+/*
+ * MMU Setup
+ */
+#define CONFIG_SYS_IBAT7L      (0)
+#define CONFIG_SYS_IBAT7U      (0)
+#define CONFIG_SYS_DBAT7L      CONFIG_SYS_IBAT7L
+#define CONFIG_SYS_DBAT7U      CONFIG_SYS_IBAT7U
+
+#endif /* __CONFIG_KM8321_COMMON_H */