brcm80211: smac: use bcma core access functions in pmu.c

The code in pmu.c now uses the functions provided by BCMA to
access the core registers.

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Alwin Beukers <alwin@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/brcm80211/brcmsmac/pmu.c b/drivers/net/wireless/brcm80211/brcmsmac/pmu.c
index ba319f3..9a4d367 100644 (file)
--- a/drivers/net/wireless/brcm80211/brcmsmac/pmu.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/pmu.c
@@ -140,7 +140,7 @@ static void si_pmu_res_masks(struct si_pub *sih, u32 * pmin, u32 * pmax)
 }
 
 static void
-si_pmu_spuravoid_pllupdate(struct si_pub *sih, struct chipcregs __iomem *cc,
+si_pmu_spuravoid_pllupdate(struct si_pub *sih, struct bcma_device *core,
                           u8 spuravoid)
 {
        u32 tmp = 0;
@@ -149,58 +149,65 @@ si_pmu_spuravoid_pllupdate(struct si_pub *sih, struct chipcregs __iomem *cc,
        case BCM43224_CHIP_ID:
        case BCM43225_CHIP_ID:
                if (spuravoid == 1) {
-                       W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL0);
-                       W_REG(&cc->pllcontrol_data, 0x11500010);
-                       W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL1);
-                       W_REG(&cc->pllcontrol_data, 0x000C0C06);
-                       W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL2);
-                       W_REG(&cc->pllcontrol_data, 0x0F600a08);
-                       W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL3);
-                       W_REG(&cc->pllcontrol_data, 0x00000000);
-                       W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL4);
-                       W_REG(&cc->pllcontrol_data, 0x2001E920);
-                       W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL5);
-                       W_REG(&cc->pllcontrol_data, 0x88888815);
+                       bcma_write32(core, CHIPCREGOFFS(pllcontrol_addr),
+                                    PMU1_PLL0_PLLCTL0);
+                       bcma_write32(core, CHIPCREGOFFS(pllcontrol_data),
+                                    0x11500010);
+                       bcma_write32(core, CHIPCREGOFFS(pllcontrol_addr),
+                                    PMU1_PLL0_PLLCTL1);
+                       bcma_write32(core, CHIPCREGOFFS(pllcontrol_data),
+                                    0x000C0C06);
+                       bcma_write32(core, CHIPCREGOFFS(pllcontrol_addr),
+                                    PMU1_PLL0_PLLCTL2);
+                       bcma_write32(core, CHIPCREGOFFS(pllcontrol_data),
+                                    0x0F600a08);
+                       bcma_write32(core, CHIPCREGOFFS(pllcontrol_addr),
+                                    PMU1_PLL0_PLLCTL3);
+                       bcma_write32(core, CHIPCREGOFFS(pllcontrol_data),
+                                    0x00000000);
+                       bcma_write32(core, CHIPCREGOFFS(pllcontrol_addr),
+                                    PMU1_PLL0_PLLCTL4);
+                       bcma_write32(core, CHIPCREGOFFS(pllcontrol_data),
+                                    0x2001E920);
+                       bcma_write32(core, CHIPCREGOFFS(pllcontrol_addr),
+                                    PMU1_PLL0_PLLCTL5);
+                       bcma_write32(core, CHIPCREGOFFS(pllcontrol_data),
+                                    0x88888815);
                } else {
-                       W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL0);
-                       W_REG(&cc->pllcontrol_data, 0x11100010);
-                       W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL1);
-                       W_REG(&cc->pllcontrol_data, 0x000c0c06);
-                       W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL2);
-                       W_REG(&cc->pllcontrol_data, 0x03000a08);
-                       W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL3);
-                       W_REG(&cc->pllcontrol_data, 0x00000000);
-                       W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL4);
-                       W_REG(&cc->pllcontrol_data, 0x200005c0);
-                       W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL5);
-                       W_REG(&cc->pllcontrol_data, 0x88888815);
+                       bcma_write32(core, CHIPCREGOFFS(pllcontrol_addr),
+                                    PMU1_PLL0_PLLCTL0);
+                       bcma_write32(core, CHIPCREGOFFS(pllcontrol_data),
+                                    0x11100010);
+                       bcma_write32(core, CHIPCREGOFFS(pllcontrol_addr),
+                                    PMU1_PLL0_PLLCTL1);
+                       bcma_write32(core, CHIPCREGOFFS(pllcontrol_data),
+                                    0x000c0c06);
+                       bcma_write32(core, CHIPCREGOFFS(pllcontrol_addr),
+                                    PMU1_PLL0_PLLCTL2);
+                       bcma_write32(core, CHIPCREGOFFS(pllcontrol_data),
+                                    0x03000a08);
+                       bcma_write32(core, CHIPCREGOFFS(pllcontrol_addr),
+                                    PMU1_PLL0_PLLCTL3);
+                       bcma_write32(core, CHIPCREGOFFS(pllcontrol_data),
+                                    0x00000000);
+                       bcma_write32(core, CHIPCREGOFFS(pllcontrol_addr),
+                                    PMU1_PLL0_PLLCTL4);
+                       bcma_write32(core, CHIPCREGOFFS(pllcontrol_data),
+                                    0x200005c0);
+                       bcma_write32(core, CHIPCREGOFFS(pllcontrol_addr),
+                                    PMU1_PLL0_PLLCTL5);
+                       bcma_write32(core, CHIPCREGOFFS(pllcontrol_data),
+                                    0x88888815);
                }
                tmp = 1 << 10;
                break;
 
-               W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL0);
-               W_REG(&cc->pllcontrol_data, 0x11100008);
-               W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL1);
-               W_REG(&cc->pllcontrol_data, 0x0c000c06);
-               W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL2);
-               W_REG(&cc->pllcontrol_data, 0x03000a08);
-               W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL3);
-               W_REG(&cc->pllcontrol_data, 0x00000000);
-               W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL4);
-               W_REG(&cc->pllcontrol_data, 0x200005c0);
-               W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL5);
-               W_REG(&cc->pllcontrol_data, 0x88888855);
-
-               tmp = 1 << 10;
-               break;
-
        default:
                /* bail out */
                return;
        }
 
-       tmp |= R_REG(&cc->pmucontrol);
-       W_REG(&cc->pmucontrol, tmp);
+       bcma_set32(core, CHIPCREGOFFS(pmucontrol), tmp);
 }
 
 u16 si_pmu_fast_pwrup_delay(struct si_pub *sih)
@@ -289,12 +296,12 @@ u32 si_pmu_alp_clock(struct si_pub *sih)
 
 void si_pmu_spuravoid(struct si_pub *sih, u8 spuravoid)
 {
-       struct chipcregs __iomem *cc;
+       struct bcma_device *cc;
        uint origidx, intr_val;
 
-       /* Remember original core before switch to chipc */
-       cc = (struct chipcregs __iomem *)
-                       ai_switch_core(sih, CC_CORE_ID, &origidx, &intr_val);
+       /* switch to chipc */
+       cc = ai_findcore(sih, BCMA_CORE_CHIPCOMMON, 0);
+       ai_switch_core(sih, CC_CORE_ID, &origidx, &intr_val);
 
        /* update the pll changes */
        si_pmu_spuravoid_pllupdate(sih, cc, spuravoid);
@@ -306,20 +313,16 @@ void si_pmu_spuravoid(struct si_pub *sih, u8 spuravoid)
 /* initialize PMU */
 void si_pmu_init(struct si_pub *sih)
 {
-       struct chipcregs __iomem *cc;
-       uint origidx;
+       struct bcma_device *core;
 
-       /* Remember original core before switch to chipc */
-       origidx = ai_coreidx(sih);
-       cc = ai_setcoreidx(sih, SI_CC_IDX);
+       /* select chipc */
+       core = ai_findcore(sih, BCMA_CORE_CHIPCOMMON, 0);
 
        if (ai_get_pmurev(sih) == 1)
-               AND_REG(&cc->pmucontrol, ~PCTL_NOILP_ON_WAIT);
+               bcma_mask32(core, CHIPCREGOFFS(pmucontrol),
+                           ~PCTL_NOILP_ON_WAIT);
        else if (ai_get_pmurev(sih) >= 2)
-               OR_REG(&cc->pmucontrol, PCTL_NOILP_ON_WAIT);
-
-       /* Return to original core */
-       ai_setcoreidx(sih, origidx);
+               bcma_set32(core, CHIPCREGOFFS(pmucontrol), PCTL_NOILP_ON_WAIT);
 }
 
 /* initialize PMU chip controls and other chip level stuff */
@@ -369,13 +372,11 @@ void si_pmu_pll_init(struct si_pub *sih, uint xtalfreq)
 /* initialize PMU resources */
 void si_pmu_res_init(struct si_pub *sih)
 {
-       struct chipcregs __iomem *cc;
-       uint origidx;
+       struct bcma_device *core;
        u32 min_mask = 0, max_mask = 0;
 
-       /* Remember original core before switch to chipc */
-       origidx = ai_coreidx(sih);
-       cc = ai_setcoreidx(sih, SI_CC_IDX);
+       /* select to chipc */
+       core = ai_findcore(sih, BCMA_CORE_CHIPCOMMON, 0);
 
        /* Determine min/max rsrc masks */
        si_pmu_res_masks(sih, &min_mask, &max_mask);
@@ -385,55 +386,50 @@ void si_pmu_res_init(struct si_pub *sih)
        /* Program max resource mask */
 
        if (max_mask)
-               W_REG(&cc->max_res_mask, max_mask);
+               bcma_write32(core, CHIPCREGOFFS(max_res_mask), max_mask);
 
        /* Program min resource mask */
 
        if (min_mask)
-               W_REG(&cc->min_res_mask, min_mask);
+               bcma_write32(core, CHIPCREGOFFS(min_res_mask), min_mask);
 
        /* Add some delay; allow resources to come up and settle. */
        mdelay(2);
-
-       /* Return to original core */
-       ai_setcoreidx(sih, origidx);
 }
 
 u32 si_pmu_measure_alpclk(struct si_pub *sih)
 {
-       struct chipcregs __iomem *cc;
-       uint origidx;
+       struct bcma_device *core;
        u32 alp_khz;
 
        if (ai_get_pmurev(sih) < 10)
                return 0;
 
        /* Remember original core before switch to chipc */
-       origidx = ai_coreidx(sih);
-       cc = ai_setcoreidx(sih, SI_CC_IDX);
+       core = ai_findcore(sih, BCMA_CORE_CHIPCOMMON, 0);
 
-       if (R_REG(&cc->pmustatus) & PST_EXTLPOAVAIL) {
+       if (bcma_read32(core, CHIPCREGOFFS(pmustatus)) & PST_EXTLPOAVAIL) {
                u32 ilp_ctr, alp_hz;
 
                /*
                 * Enable the reg to measure the freq,
                 * in case it was disabled before
                 */
-               W_REG(&cc->pmu_xtalfreq,
-                     1U << PMU_XTALFREQ_REG_MEASURE_SHIFT);
+               bcma_write32(core, CHIPCREGOFFS(pmu_xtalfreq),
+                           1U << PMU_XTALFREQ_REG_MEASURE_SHIFT);
 
                /* Delay for well over 4 ILP clocks */
                udelay(1000);
 
                /* Read the latched number of ALP ticks per 4 ILP ticks */
-               ilp_ctr =
-                   R_REG(&cc->pmu_xtalfreq) & PMU_XTALFREQ_REG_ILPCTR_MASK;
+               ilp_ctr = bcma_read32(core, CHIPCREGOFFS(pmu_xtalfreq)) &
+                         PMU_XTALFREQ_REG_ILPCTR_MASK;
 
                /*
                 * Turn off the PMU_XTALFREQ_REG_MEASURE_SHIFT
                 * bit to save power
                 */
-               W_REG(&cc->pmu_xtalfreq, 0);
+               bcma_write32(core, CHIPCREGOFFS(pmu_xtalfreq), 0);
 
                /* Calculate ALP frequency */
                alp_hz = (ilp_ctr * EXT_ILP_HZ) / 4;
@@ -446,8 +442,5 @@ u32 si_pmu_measure_alpclk(struct si_pub *sih)
        } else
                alp_khz = 0;
 
-       /* Return to original core */
-       ai_setcoreidx(sih, origidx);
-
        return alp_khz;
 }