net: phy: marvell: tabification

Convert spaces to tabs where appropriate, and fix up some otherwise
odd indentation.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 5d314f1..6a5256c 100644 (file)
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -108,24 +108,24 @@
 #define MII_88E1318S_PHY_MSCR1_PAD_ODD BIT(6)
 
 /* Copper Specific Interrupt Enable Register */
-#define MII_88E1318S_PHY_CSIER                              0x12
+#define MII_88E1318S_PHY_CSIER                         0x12
 /* WOL Event Interrupt Enable */
-#define MII_88E1318S_PHY_CSIER_WOL_EIE                      BIT(7)
+#define MII_88E1318S_PHY_CSIER_WOL_EIE                 BIT(7)
 
 /* LED Timer Control Register */
-#define MII_88E1318S_PHY_LED_TCR                            0x12
-#define MII_88E1318S_PHY_LED_TCR_FORCE_INT                  BIT(15)
-#define MII_88E1318S_PHY_LED_TCR_INTn_ENABLE                BIT(7)
-#define MII_88E1318S_PHY_LED_TCR_INT_ACTIVE_LOW             BIT(11)
+#define MII_88E1318S_PHY_LED_TCR                       0x12
+#define MII_88E1318S_PHY_LED_TCR_FORCE_INT             BIT(15)
+#define MII_88E1318S_PHY_LED_TCR_INTn_ENABLE           BIT(7)
+#define MII_88E1318S_PHY_LED_TCR_INT_ACTIVE_LOW                BIT(11)
 
 /* Magic Packet MAC address registers */
-#define MII_88E1318S_PHY_MAGIC_PACKET_WORD2                 0x17
-#define MII_88E1318S_PHY_MAGIC_PACKET_WORD1                 0x18
-#define MII_88E1318S_PHY_MAGIC_PACKET_WORD0                 0x19
+#define MII_88E1318S_PHY_MAGIC_PACKET_WORD2            0x17
+#define MII_88E1318S_PHY_MAGIC_PACKET_WORD1            0x18
+#define MII_88E1318S_PHY_MAGIC_PACKET_WORD0            0x19
 
-#define MII_88E1318S_PHY_WOL_CTRL                           0x10
-#define MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS          BIT(12)
-#define MII_88E1318S_PHY_WOL_CTRL_MAGIC_PACKET_MATCH_ENABLE BIT(14)
+#define MII_88E1318S_PHY_WOL_CTRL                              0x10
+#define MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS             BIT(12)
+#define MII_88E1318S_PHY_WOL_CTRL_MAGIC_PACKET_MATCH_ENABLE    BIT(14)
 
 #define MII_88E1121_PHY_LED_CTRL       16
 #define MII_88E1121_PHY_LED_DEF                0x0030
@@ -152,7 +152,7 @@
 #define LPA_FIBER_1000HALF     0x40
 #define LPA_FIBER_1000FULL     0x20
 
-#define LPA_PAUSE_FIBER        0x180
+#define LPA_PAUSE_FIBER                0x180
 #define LPA_PAUSE_ASYM_FIBER   0x100
 
 #define ADVERTISE_FIBER_1000HALF       0x40
@@ -596,7 +596,7 @@ static int marvell_config_aneg_fiber(struct phy_device *phydev)
 
        if (changed == 0) {
                /* Advertisement hasn't changed, but maybe aneg was never on to
-                * begin with?  Or maybe phy was isolated?
+                * begin with?  Or maybe phy was isolated?
                 */
                int ctl = phy_read(phydev, MII_BMCR);
 
@@ -1515,7 +1515,7 @@ static void marvell_get_strings(struct phy_device *phydev, u8 *data)
 }
 
 #ifndef UINT64_MAX
-#define UINT64_MAX              (u64)(~((u64)0))
+#define UINT64_MAX             (u64)(~((u64)0))
 #endif
 static u64 marvell_get_stat(struct phy_device *phydev, int i)
 {