* mode : Brightness control mode. PWM or register based.
* device_control : Value of DEVICE CONTROL register.
* initial_brightness : Initial value of backlight brightness.
-* pwm_data : Platform specific pwm generation functions.
+* period_ns : Platform specific PWM period value. unit is nano.
Only valid when brightness is pwm input mode.
- Functions should be implemented by PWM driver.
- - pwm_set_intensity() : set duty of PWM
- - pwm_get_intensity() : get current duty of PWM
* load_new_rom_data :
0 : use default configuration data
1 : update values of eeprom or eprom registers on loading driver
.mode = PWM_BASED,
.device_control = PWM_CONFIG(LP8556),
.initial_brightness = INITIAL_BRT,
- .pwm_data = {
- .pwm_set_intensity = platform_pwm_set_intensity,
- .pwm_get_intensity = platform_pwm_get_intensity,
- },
+ .period_ns = 1000000,
};
#include <linux/backlight.h>
#include <linux/err.h>
#include <linux/platform_data/lp855x.h>
+#include <linux/pwm.h>
/* Registers */
#define BRIGHTNESS_CTRL 0x00
struct device *dev;
struct mutex xfer_lock;
struct lp855x_platform_data *pdata;
+ struct pwm_device *pwm;
};
static int lp855x_read_byte(struct lp855x *lp, u8 reg, u8 *data)
return ret;
}
+static void lp855x_pwm_ctrl(struct lp855x *lp, int br, int max_br)
+{
+ unsigned int period = lp->pdata->period_ns;
+ unsigned int duty = br * period / max_br;
+ struct pwm_device *pwm;
+
+ /* request pwm device with the consumer name */
+ if (!lp->pwm) {
+ pwm = devm_pwm_get(lp->dev, lp->chipname);
+ if (IS_ERR(pwm))
+ return;
+
+ lp->pwm = pwm;
+ }
+
+ pwm_config(lp->pwm, duty, period);
+ if (duty)
+ pwm_enable(lp->pwm);
+ else
+ pwm_disable(lp->pwm);
+}
+
static int lp855x_bl_update_status(struct backlight_device *bl)
{
struct lp855x *lp = bl_get_data(bl);
bl->props.brightness = 0;
if (mode == PWM_BASED) {
- struct lp855x_pwm_data *pd = &lp->pdata->pwm_data;
int br = bl->props.brightness;
int max_br = bl->props.max_brightness;
- if (pd->pwm_set_intensity)
- pd->pwm_set_intensity(br, max_br);
+ lp855x_pwm_ctrl(lp, br, max_br);
} else if (mode == REGISTER_BASED) {
u8 val = bl->props.brightness;
struct lp855x *lp = bl_get_data(bl);
enum lp855x_brightness_ctrl_mode mode = lp->pdata->mode;
- if (mode == PWM_BASED) {
- struct lp855x_pwm_data *pd = &lp->pdata->pwm_data;
- int max_br = bl->props.max_brightness;
-
- if (pd->pwm_get_intensity)
- bl->props.brightness = pd->pwm_get_intensity(max_br);
-
- } else if (mode == REGISTER_BASED) {
+ if (mode == REGISTER_BASED) {
u8 val = 0;
lp855x_read_byte(lp, BRIGHTNESS_CTRL, &val);
LP8556_COMBINED2, /* pwm + i2c after the shaper block */
};
-struct lp855x_pwm_data {
- void (*pwm_set_intensity) (int brightness, int max_brightness);
- int (*pwm_get_intensity) (int max_brightness);
-};
-
struct lp855x_rom_data {
u8 addr;
u8 val;
* @mode : brightness control by pwm or lp855x register
* @device_control : value of DEVICE CONTROL register
* @initial_brightness : initial value of backlight brightness
- * @pwm_data : platform specific pwm generation functions.
+ * @period_ns : platform specific pwm period value. unit is nano.
Only valid when mode is PWM_BASED.
* @load_new_rom_data :
0 : use default configuration data
enum lp855x_brightness_ctrl_mode mode;
u8 device_control;
int initial_brightness;
- struct lp855x_pwm_data pwm_data;
+ unsigned int period_ns;
u8 load_new_rom_data;
int size_program;
struct lp855x_rom_data *rom_data;