ARM: dts: am437x-l4: drop legacy cpsw dt node

All am437x boards have been converted to use new driver, so drop legacy
cpsw dt node.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/boot/dts/am437x-l4.dtsi b/arch/arm/boot/dts/am437x-l4.dtsi
index e702e95..d82a6ee 100644 (file)
--- a/arch/arm/boot/dts/am437x-l4.dtsi
+++ b/arch/arm/boot/dts/am437x-l4.dtsi
@@ -521,57 +521,6 @@
                        #size-cells = <1>;
                        ranges = <0x0 0x100000 0x8000>;
 
-                       mac: ethernet@0 {
-                               compatible = "ti,am4372-cpsw","ti,cpsw";
-                               reg = <0x0 0x800
-                                      0x1200 0x100>;
-                               interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH
-                                             GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH
-                                             GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH
-                                             GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
-                               #address-cells = <1>;
-                               #size-cells = <1>;
-                               clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>,
-                                        <&dpll_clksel_mac_clk>;
-                               clock-names = "fck", "cpts", "50mclk";
-                               assigned-clocks = <&dpll_clksel_mac_clk>;
-                               assigned-clock-rates = <50000000>;
-                               status = "disabled";
-                               cpdma_channels = <8>;
-                               ale_entries = <1024>;
-                               bd_ram_size = <0x2000>;
-                               mac_control = <0x20>;
-                               slaves = <2>;
-                               active_slave = <0>;
-                               cpts_clock_mult = <0x80000000>;
-                               cpts_clock_shift = <29>;
-                               ranges = <0 0 0x8000>;
-                               syscon = <&scm_conf>;
-
-                               davinci_mdio: mdio@1000 {
-                                       compatible = "ti,am4372-mdio","ti,cpsw-mdio","ti,davinci_mdio";
-                                       reg = <0x1000 0x100>;
-                                       clocks = <&cpsw_125mhz_clkctrl AM4_CPSW_125MHZ_CPGMAC0_CLKCTRL 0>;
-                                       clock-names = "fck";
-                                       #address-cells = <1>;
-                                       #size-cells = <0>;
-                                       bus_freq = <1000000>;
-                                       status = "disabled";
-                               };
-
-                               cpsw_emac0: slave@200 {
-                                       /* Filled in by U-Boot */
-                                       mac-address = [ 00 00 00 00 00 00 ];
-                                       phys = <&phy_gmii_sel 1 0>;
-                               };
-
-                               cpsw_emac1: slave@300 {
-                                       /* Filled in by U-Boot */
-                                       mac-address = [ 00 00 00 00 00 00 ];
-                                       phys = <&phy_gmii_sel 2 0>;
-                               };
-                       };
-
                        mac_sw: switch@0 {
                                compatible = "ti,am4372-cpsw","ti,cpsw-switch";
                                reg = <0x0 0x4000>;