[ LOCATE_16 ] = "LOCATE_16",
[ WRITE_SAME_16 ] = "WRITE_SAME_16",
[ ERASE_16 ] = "ERASE_16",
- [ SERVICE_ACTION_IN ] = "SERVICE_ACTION_IN",
+ [ SERVICE_ACTION_IN_16 ] = "SERVICE_ACTION_IN_16",
[ WRITE_LONG_16 ] = "WRITE_LONG_16",
[ REPORT_LUNS ] = "REPORT_LUNS",
[ BLANK ] = "BLANK",
[ LOAD_UNLOAD ] = "LOAD_UNLOAD",
[ READ_12 ] = "READ_12",
[ WRITE_12 ] = "WRITE_12",
+ [ SERVICE_ACTION_IN_12 ] = "SERVICE_ACTION_IN_12",
[ WRITE_VERIFY_12 ] = "WRITE_VERIFY_12",
[ VERIFY_12 ] = "VERIFY_12",
[ SEARCH_HIGH_12 ] = "SEARCH_HIGH_12",
#define LOCATE_16 0x92
#define WRITE_SAME_16 0x93
#define ERASE_16 0x93
-#define SERVICE_ACTION_IN 0x9e
+#define SERVICE_ACTION_IN_16 0x9e
#define WRITE_LONG_16 0x9f
#define REPORT_LUNS 0xa0
#define BLANK 0xa1
#define LOAD_UNLOAD 0xa6
#define READ_12 0xa8
#define WRITE_12 0xaa
+#define SERVICE_ACTION_IN_12 0xab
#define WRITE_VERIFY_12 0xae
#define VERIFY_12 0xaf
#define SEARCH_HIGH_12 0xb0
#define SET_CD_SPEED 0xbb
/*
+ * SERVICE ACTION IN subcodes
+ */
+#define SAI_READ_CAPACITY_16 0x10
+
+/*
* SAM Status codes
*/
outbuf[7] = 8; // CD-ROM
buflen = 8;
break;
- case SERVICE_ACTION_IN:
+ case SERVICE_ACTION_IN_16:
/* Service Action In subcommands. */
- if ((req->cmd.buf[1] & 31) == 0x10) {
+ if ((req->cmd.buf[1] & 31) == SAI_READ_CAPACITY_16) {
DPRINTF("SAI READ CAPACITY(16)\n");
memset(outbuf, 0, req->cmd.xfer);
bdrv_get_geometry(s->bs, &nb_sectors);
case READ_CAPACITY_10:
case READ_TOC:
case GET_CONFIGURATION:
- case SERVICE_ACTION_IN:
+ case SERVICE_ACTION_IN_16:
case VERIFY_10:
rc = scsi_disk_emulate_command(r, outbuf);
if (rc < 0) {