kconfig: move CONFIG_SYS_HZ to lib/Kconfig

CONFIG_SYS_HZ is always defined as 1000 in config_fallbacks.h
(but some boards still have redundant definitions).

This commit moves the definition and the document in README to
Kconfig.  Since lib/Kconfig can assure that CONFIG_SYS_HZ is 1000,
the sanity check in lib/time.c should be removed.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Reviewed-by: Marek Vasut <marex@denx.de>

diff --git a/README b/README
index 4dbf2d4..3ff7932 100644 (file)
--- a/README
+++ b/README
@@ -623,13 +623,6 @@ The following options need to be configured:
                exists, unlike the similar options in the Linux kernel. Do not
                set these options unless they apply!
 
-- CPU timer options:
-               CONFIG_SYS_HZ
-
-               The frequency of the timer returned by get_timer().
-               get_timer() must operate in milliseconds and this CONFIG
-               option must be set to 1000.
-
 - Linux Kernel Interface:
                CONFIG_CLOCKS_IN_MHZ
 

diff --git a/include/config_fallbacks.h b/include/config_fallbacks.h
index 76818f6..7d8daa2 100644 (file)
--- a/include/config_fallbacks.h
+++ b/include/config_fallbacks.h
@@ -79,10 +79,6 @@
 #define CONFIG_SYS_PROMPT      "=> "
 #endif
 
-#ifndef CONFIG_SYS_HZ
-#define CONFIG_SYS_HZ          1000
-#endif
-
 #ifndef CONFIG_FIT_SIGNATURE
 #define CONFIG_IMAGE_FORMAT_LEGACY
 #endif

diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h
index a20c373..f7277eb 100644 (file)
--- a/include/configs/cm_fx6.h
+++ b/include/configs/cm_fx6.h
@@ -19,7 +19,6 @@
 #define CONFIG_MX6
 #define CONFIG_SYS_LITTLE_ENDIAN
 #define CONFIG_MACH_TYPE               4273
-#define CONFIG_SYS_HZ                  1000
 
 #ifndef CONFIG_SPL_BUILD
 #define CONFIG_DM

diff --git a/include/configs/edb93xx.h b/include/configs/edb93xx.h
index 37bdcc0..47a8420 100644 (file)
--- a/include/configs/edb93xx.h
+++ b/include/configs/edb93xx.h
@@ -89,7 +89,6 @@
 #define CONFIG_EP93XX          1               /* in a Cirrus Logic 93xx SoC */
 
 #define CONFIG_SYS_CLK_FREQ    14745600        /* EP93xx has a 14.7456 clock */
-#define CONFIG_SYS_HZ          1000            /* decr freq: 1 ms ticks */
 #undef CONFIG_USE_IRQ                          /* Don't need IRQ/FIQ */
 
 /* Monitor configuration */

diff --git a/include/configs/ks2_evm.h b/include/configs/ks2_evm.h
index 51926f7..137d9b0 100644 (file)
--- a/include/configs/ks2_evm.h
+++ b/include/configs/ks2_evm.h
@@ -23,7 +23,6 @@
 #define CONFIG_ARMV7
 #define CONFIG_ARCH_CPU_INIT
 #define CONFIG_SYS_ARCH_TIMER
-#define CONFIG_SYS_HZ                  1000
 #define CONFIG_SYS_TEXT_BASE           0x0c001000
 #define CONFIG_SPL_TARGET              "u-boot-spi.gph"
 #define CONFIG_SYS_DCACHE_OFF

diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index 4221426..d1f6ea7 100644 (file)
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -360,7 +360,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_MEMTEST_END         0x9fffffff
 
 #define CONFIG_SYS_LOAD_ADDR           0x82000000
-#define CONFIG_SYS_HZ                  1000
 
 /*
  * Stack sizes

diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index 5868287..3c73af8 100644 (file)
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -261,7 +261,6 @@
 #define CONFIG_SYS_MEMTEST_END         0x9fffffff
 
 #define CONFIG_SYS_LOAD_ADDR           0x82000000
-#define CONFIG_SYS_HZ                  1000
 
 /*
  * Stack sizes

diff --git a/include/configs/ls2085a_common.h b/include/configs/ls2085a_common.h
index a72e1f3..6fe032c 100644 (file)
--- a/include/configs/ls2085a_common.h
+++ b/include/configs/ls2085a_common.h
@@ -253,8 +253,6 @@
 
 #define CONFIG_NR_DRAM_BANKS           3
 
-#define CONFIG_SYS_HZ                  1000
-
 #define CONFIG_HWCONFIG
 #define HWCONFIG_BUFFER_SIZE           128
 

diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
index 1d947d7..0c117bc 100644 (file)
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -105,8 +105,6 @@
 /* standalone support */
 #define CONFIG_STANDALONE_LOAD_ADDR    0x42000000
 
-#define CONFIG_SYS_HZ                  1000
-
 /* baudrate */
 #define CONFIG_BAUDRATE                        115200
 

diff --git a/include/configs/tqma6.h b/include/configs/tqma6.h
index 2705d2c..d97a961 100644 (file)
--- a/include/configs/tqma6.h
+++ b/include/configs/tqma6.h
@@ -450,7 +450,6 @@
 #define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE
 
 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
-#define CONFIG_SYS_HZ                  1000
 
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_STACKSIZE               (128u * SZ_1K)

diff --git a/lib/Kconfig b/lib/Kconfig
index 88e5da7..a889c22 100644 (file)
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -8,4 +8,12 @@ config CC_OPTIMIZE_LIBS_FOR_SPEED
 
          If unsure, say N.
 
+config SYS_HZ
+       int
+       default 1000
+       help
+         The frequency of the timer returned by get_timer().
+         get_timer() must operate in milliseconds and this option must be
+         set to 1000.
+
 endmenu

diff --git a/lib/time.c b/lib/time.c
index c7b0264..5ebd1be 100644 (file)
--- a/lib/time.c
+++ b/lib/time.c
@@ -10,10 +10,6 @@
 #include <div64.h>
 #include <asm/io.h>
 
-#if CONFIG_SYS_HZ != 1000
-#warning "CONFIG_SYS_HZ must be 1000 and should not be defined by platforms"
-#endif
-
 #ifndef CONFIG_WD_PERIOD
 # define CONFIG_WD_PERIOD      (10 * 1000 * 1000)      /* 10 seconds default */
 #endif