powerpc/ftrace: Add Kconfig & Make glue for mprofile-kernel

Firstly we add logic to Kconfig to allow a user to choose if they want
mprofile-kernel. This has to be user-selectable because only some
current toolchains support it. If we enabled it unconditionally we would
prevent some users from building the kernel entirely.

Arguably it would be nice if we could detect if mprofile-kernel was
available, and use it then. However that would violate the principle of
least surprise because a user having choosen options such as live
patching, would then see them quietly disabled at build time.

We also make the user selectable option negative, ie. it disables when
selected, so that allyesconfig continues to build on old toolchains.

Once we've decided we do want to use mprofile-kernel, we then add a
script which checks it actually works. That is because there are
versions of gcc that accept the flag but don't generate correct code.

Due to the way kconfig works, we can't error out when we detect a
non-working toolchain. If we did a user would never be able to modify
their config and run oldconfig - because the check would block oldconfig
from running. Instead we emit a warning and add a bogus flag to CFLAGS
so that the build will fail.

Signed-off-by: Torsten Duwe <duwe@suse.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index e4824fd..91da283 100644 (file)
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -94,6 +94,7 @@ config PPC
        select OF_RESERVED_MEM
        select HAVE_FTRACE_MCOUNT_RECORD
        select HAVE_DYNAMIC_FTRACE
+       select HAVE_DYNAMIC_FTRACE_WITH_REGS if MPROFILE_KERNEL
        select HAVE_FUNCTION_TRACER
        select HAVE_FUNCTION_GRAPH_TRACER
        select SYSCTL_EXCEPTION_TRACE
@@ -373,6 +374,24 @@ config PPC_TRANSACTIONAL_MEM
        ---help---
          Support user-mode Transactional Memory on POWERPC.
 
+config DISABLE_MPROFILE_KERNEL
+       bool "Disable use of mprofile-kernel for kernel tracing"
+       depends on PPC64 && CPU_LITTLE_ENDIAN
+       default y
+       help
+         Selecting this options disables use of the mprofile-kernel ABI for
+         kernel tracing. That will cause options such as live patching
+         (CONFIG_LIVEPATCH) which depend on CONFIG_DYNAMIC_FTRACE_WITH_REGS to
+         be disabled also.
+
+         If you have a toolchain which supports mprofile-kernel, then you can
+         enable this. Otherwise leave it disabled. If you're not sure, say
+         "N".
+
+config MPROFILE_KERNEL
+       depends on PPC64 && CPU_LITTLE_ENDIAN
+       def_bool !DISABLE_MPROFILE_KERNEL
+
 config IOMMU_HELPER
        def_bool PPC64
 

diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 96efd82..f4e49a4 100644 (file)
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -133,6 +133,21 @@ else
 CFLAGS-$(CONFIG_GENERIC_CPU) += -mcpu=powerpc64
 endif
 
+ifdef CONFIG_MPROFILE_KERNEL
+    ifeq ($(shell $(srctree)/arch/powerpc/scripts/gcc-check-mprofile-kernel.sh $(CC) -I$(srctree)/include -D__KERNEL__),OK)
+        CC_FLAGS_FTRACE := -pg -mprofile-kernel
+        KBUILD_CPPFLAGS += -DCC_USING_MPROFILE_KERNEL
+    else
+        # If the user asked for mprofile-kernel but the toolchain doesn't
+        # support it, emit a warning and deliberately break the build later
+        # with mprofile-kernel-not-supported. We would prefer to make this an
+        # error right here, but then the user would never be able to run
+        # oldconfig to change their configuration.
+        $(warning Compiler does not support mprofile-kernel, set CONFIG_DISABLE_MPROFILE_KERNEL)
+        CC_FLAGS_FTRACE := -mprofile-kernel-not-supported
+    endif
+endif
+
 CFLAGS-$(CONFIG_CELL_CPU) += $(call cc-option,-mcpu=cell)
 CFLAGS-$(CONFIG_POWER4_CPU) += $(call cc-option,-mcpu=power4)
 CFLAGS-$(CONFIG_POWER5_CPU) += $(call cc-option,-mcpu=power5)

diff --git a/arch/powerpc/scripts/gcc-check-mprofile-kernel.sh b/arch/powerpc/scripts/gcc-check-mprofile-kernel.sh
new file mode 100755 (executable)
index 0000000..c658d8c
--- /dev/null
+++ b/arch/powerpc/scripts/gcc-check-mprofile-kernel.sh
@@ -0,0 +1,23 @@
+#!/bin/bash
+
+set -e
+set -o pipefail
+
+# To debug, uncomment the following line
+# set -x
+
+# Test whether the compile option -mprofile-kernel exists and generates
+# profiling code (ie. a call to _mcount()).
+echo "int func() { return 0; }" | \
+    $* -S -x c -O2 -p -mprofile-kernel - -o - 2> /dev/null | \
+    grep -q "_mcount"
+
+# Test whether the notrace attribute correctly suppresses calls to _mcount().
+
+echo -e "#include <linux/compiler.h>\nnotrace int func() { return 0; }" | \
+    $* -S -x c -O2 -p -mprofile-kernel - -o - 2> /dev/null | \
+    grep -q "_mcount" && \
+    exit 1
+
+echo "OK"
+exit 0