2007-04-24 Daniel Franke <franke.daniel@gmail.com>

       * doc/invoke.texi: Removed leading '-' from option index entries.

git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@124092 138bc75d-0d04-0410-961f-82ee72b054a4

diff --git a/gcc/ChangeLog b/gcc/ChangeLog
index 54823d0..d7ef0c9 100644 (file)
--- a/gcc/ChangeLog
+++ b/gcc/ChangeLog
@@ -1,3 +1,7 @@
+2007-04-24  Daniel Franke  <franke.daniel@gmail.com>
+
+       * doc/invoke.texi: Removed leading '-' from option index entries.
+
 2007-04-23  Zdenek Dvorak  <dvorakz@suse.cz>
 
        * tree-phinodes.c (reserve_phi_args_for_new_edge, remove_phi_node):

diff --git a/gcc/doc/invoke.texi b/gcc/doc/invoke.texi
index d1523db..c6ddd9f 100644 (file)
--- a/gcc/doc/invoke.texi
+++ b/gcc/doc/invoke.texi
@@ -3016,7 +3016,7 @@ cases that are safe.
 
 @item -Wstrict-overflow
 @item -Wstrict-overflow=@var{n}
-@opindex -Wstrict-overflow
+@opindex Wstrict-overflow
 This option is only active when @option{-fstrict-overflow} is active.
 It warns about cases where the compiler optimizes based on the
 assumption that signed overflow does not occur.  Note that it does not
@@ -5232,7 +5232,7 @@ the condition is known to be true or false.
 Enabled at levels @option{-O2}, @option{-O3}, @option{-Os}.
 
 @item -fsplit-wide-types
-@opindex -fsplit-wide-types
+@opindex fsplit-wide-types
 When using a type that occupies multiple registers, such as @code{long
 long} on a 32-bit system, split the registers apart and allocate them
 independently.  This normally generates better code for those types,
@@ -5640,7 +5640,7 @@ the loop is entered.  This usually makes programs run more slowly.
 @option{-funroll-loops},
 
 @item -fsplit-ivs-in-unroller
-@opindex -fsplit-ivs-in-unroller
+@opindex fsplit-ivs-in-unroller
 Enables expressing of values of induction variables in later iterations
 of the unrolled loop using the value in the first iteration.  This breaks
 long dependency chains, thus improving efficiency of the scheduling passes.
@@ -5653,7 +5653,7 @@ on some of the architectures due to restrictions in the CSE pass.
 This optimization is enabled by default.
 
 @item -fvariable-expansion-in-unroller
-@opindex -fvariable-expansion-in-unroller
+@opindex fvariable-expansion-in-unroller
 With this option, the compiler will create multiple copies of some
 local variables when unrolling a loop which can result in superior code.
 
@@ -8655,13 +8655,13 @@ warn about constructs contained within header files found via
 @var{dir}.  This option is valid only for the C family of languages.
 
 @item -gused
-@opindex -gused
+@opindex gused
 Emit debugging information for symbols that are used.  For STABS
 debugging format, this enables @option{-feliminate-unused-debug-symbols}.
 This is by default ON@.
 
 @item -gfull
-@opindex -gfull
+@opindex gfull
 Emit debugging information for all symbols and types.
 
 @item -mmacosx-version-min=@var{version}
@@ -8683,7 +8683,7 @@ applicable.  This mode also sets @option{-mno-altivec},
 @option{-mlong-branch} for PowerPC targets.
 
 @item -mone-byte-bool
-@opindex -mone-byte-bool
+@opindex mone-byte-bool
 Override the defaults for @samp{bool} so that @samp{sizeof(bool)==1}.
 By default @samp{sizeof(bool)} is @samp{4} when compiling for
 Darwin/PowerPC and @samp{1} when compiling for Darwin/x86, so this
@@ -8732,12 +8732,12 @@ This option specifies the @var{executable} that will be loading the build
 output file being linked.  See man ld(1) for more information.
 
 @item -dynamiclib
-@opindex -dynamiclib
+@opindex dynamiclib
 When passed this option, GCC will produce a dynamic library instead of
 an executable when linking, using the Darwin @file{libtool} command.
 
 @item -force_cpusubtype_ALL
-@opindex -force_cpusubtype_ALL
+@opindex force_cpusubtype_ALL
 This causes GCC's output file to have the @var{ALL} subtype, instead of
 one controlled by the @option{-mcpu} or @option{-march} option.
 
@@ -10209,7 +10209,7 @@ the file containing the CPU detection code should be compiled without
 these options.
 
 @item -mcx16
-@opindex -mcx16
+@opindex mcx16
 This option will enable GCC to use CMPXCHG16B instruction in generated code.
 CMPXCHG16B allows for atomic operations on 128-bit double quadword (or oword)
 data types.  This is useful for high resolution counters that could be updated
@@ -10217,7 +10217,7 @@ by multiple processors (or cores).  This instruction is generated as part of
 atomic built-in functions: see @ref{Atomic Builtins} for details.
 
 @item -msahf
-@opindex -msahf
+@opindex msahf
 This option will enable GCC to use SAHF instruction in generated 64-bit code.
 Early Intel CPUs with Intel 64 lacked LAHF and SAHF instructions supported
 by AMD64 until introduction of Pentium 4 G1 step in December 2005.  LAHF and
@@ -10497,8 +10497,8 @@ to 64 bits.  These are HP-UX specific flags.
 
 @item -mno-sched-br-data-spec
 @itemx -msched-br-data-spec
-@opindex -mno-sched-br-data-spec
-@opindex -msched-br-data-spec
+@opindex mno-sched-br-data-spec
+@opindex msched-br-data-spec
 (Dis/En)able data speculative scheduling before reload.
 This will result in generation of the ld.a instructions and
 the corresponding check instructions (ld.c / chk.a).
@@ -10506,8 +10506,8 @@ The default is 'disable'.
 
 @item -msched-ar-data-spec
 @itemx -mno-sched-ar-data-spec
-@opindex -msched-ar-data-spec
-@opindex -mno-sched-ar-data-spec
+@opindex msched-ar-data-spec
+@opindex mno-sched-ar-data-spec
 (En/Dis)able data speculative scheduling after reload.
 This will result in generation of the ld.a instructions and
 the corresponding check instructions (ld.c / chk.a).
@@ -10515,8 +10515,8 @@ The default is 'enable'.
 
 @item -mno-sched-control-spec
 @itemx -msched-control-spec
-@opindex -mno-sched-control-spec
-@opindex -msched-control-spec
+@opindex mno-sched-control-spec
+@opindex msched-control-spec
 (Dis/En)able control speculative scheduling.  This feature is
 available only during region scheduling (i.e. before reload).
 This will result in generation of the ld.s instructions and
@@ -10525,8 +10525,8 @@ The default is 'disable'.
 
 @item -msched-br-in-data-spec
 @itemx -mno-sched-br-in-data-spec
-@opindex -msched-br-in-data-spec
-@opindex -mno-sched-br-in-data-spec
+@opindex msched-br-in-data-spec
+@opindex mno-sched-br-in-data-spec
 (En/Dis)able speculative scheduling of the instructions that
 are dependent on the data speculative loads before reload.
 This is effective only with @option{-msched-br-data-spec} enabled.
@@ -10534,8 +10534,8 @@ The default is 'enable'.
 
 @item -msched-ar-in-data-spec
 @itemx -mno-sched-ar-in-data-spec
-@opindex -msched-ar-in-data-spec
-@opindex -mno-sched-ar-in-data-spec
+@opindex msched-ar-in-data-spec
+@opindex mno-sched-ar-in-data-spec
 (En/Dis)able speculative scheduling of the instructions that
 are dependent on the data speculative loads after reload.
 This is effective only with @option{-msched-ar-data-spec} enabled.
@@ -10543,8 +10543,8 @@ The default is 'enable'.
 
 @item -msched-in-control-spec
 @itemx -mno-sched-in-control-spec
-@opindex -msched-in-control-spec
-@opindex -mno-sched-in-control-spec
+@opindex msched-in-control-spec
+@opindex mno-sched-in-control-spec
 (En/Dis)able speculative scheduling of the instructions that
 are dependent on the control speculative loads.
 This is effective only with @option{-msched-control-spec} enabled.
@@ -10552,8 +10552,8 @@ The default is 'enable'.
 
 @item -msched-ldc
 @itemx -mno-sched-ldc
-@opindex -msched-ldc
-@opindex -mno-sched-ldc
+@opindex msched-ldc
+@opindex mno-sched-ldc
 (En/Dis)able use of simple data speculation checks ld.c .
 If disabled, only chk.a instructions will be emitted to check
 data speculative loads.
@@ -10561,8 +10561,8 @@ The default is 'enable'.
 
 @item -mno-sched-control-ldc
 @itemx -msched-control-ldc
-@opindex -mno-sched-control-ldc
-@opindex -msched-control-ldc
+@opindex mno-sched-control-ldc
+@opindex msched-control-ldc
 (Dis/En)able use of ld.c instructions to check control speculative loads.
 If enabled, in case of control speculative load with no speculatively
 scheduled dependent instructions this load will be emitted as ld.sa and
@@ -10571,14 +10571,14 @@ The default is 'disable'.
 
 @item -mno-sched-spec-verbose
 @itemx -msched-spec-verbose
-@opindex -mno-sched-spec-verbose
-@opindex -msched-spec-verbose
+@opindex mno-sched-spec-verbose
+@opindex msched-spec-verbose
 (Dis/En)able printing of the information about speculative motions.
 
 @item -mno-sched-prefer-non-data-spec-insns
 @itemx -msched-prefer-non-data-spec-insns
-@opindex -mno-sched-prefer-non-data-spec-insns
-@opindex -msched-prefer-non-data-spec-insns
+@opindex mno-sched-prefer-non-data-spec-insns
+@opindex msched-prefer-non-data-spec-insns
 If enabled, data speculative instructions will be chosen for schedule
 only if there are no other choices at the moment.  This will make
 the use of the data speculation much more conservative.
@@ -10586,8 +10586,8 @@ The default is 'disable'.
 
 @item -mno-sched-prefer-non-control-spec-insns
 @itemx -msched-prefer-non-control-spec-insns
-@opindex -mno-sched-prefer-non-control-spec-insns
-@opindex -msched-prefer-non-control-spec-insns
+@opindex mno-sched-prefer-non-control-spec-insns
+@opindex msched-prefer-non-control-spec-insns
 If enabled, control speculative instructions will be chosen for schedule
 only if there are no other choices at the moment.  This will make
 the use of the control speculation much more conservative.
@@ -10595,8 +10595,8 @@ The default is 'disable'.
 
 @item -mno-sched-count-spec-in-critical-path
 @itemx -msched-count-spec-in-critical-path
-@opindex -mno-sched-count-spec-in-critical-path
-@opindex -msched-count-spec-in-critical-path
+@opindex mno-sched-count-spec-in-critical-path
+@opindex msched-count-spec-in-critical-path
 If enabled, speculative dependencies will be considered during
 computation of the instructions priorities.  This will make the use of the
 speculation a bit more conservative.
@@ -11007,7 +11007,7 @@ Additionally, parameters passed on the stack are also aligned to a
 16-bit boundary even on targets whose API mandates promotion to 32-bit.
 
 @item -mno-short
-@opindex -mno-short
+@opindex mno-short
 Do not consider type @code{int} to be 16 bits wide.  This is the default.
 
 @item -mnobitfield
@@ -13025,15 +13025,15 @@ These options are defined for Score implementations:
 Compile code for big endian mode.  This is the default.
 
 @item -mel
-@opindex -mel
+@opindex mel
 Compile code for little endian mode. 
 
 @item -mnhwloop
-@opindex -mnhwloop
+@opindex mnhwloop
 Disable generate bcnz instruction.
 
 @item -muls
-@opindex -muls
+@opindex muls
 Enable generate unaligned load and store instruction.
 
 @item -mmac