boards: Disable CMD_SATA on platforms that no longer have a SATA driver enabled

There are a number of platforms that depend on a SATA driver that has
been converted to require AHCI but the platforms themselves are behind
on other migrations that would make it trivial to enable AHCI.  Disable
SATA in these cases.

Signed-off-by: Tom Rini <trini@konsulko.com>

diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig
index 06a20c8..206ee76 100644 (file)
--- a/arch/powerpc/cpu/mpc85xx/Kconfig
+++ b/arch/powerpc/cpu/mpc85xx/Kconfig
@@ -153,7 +153,6 @@ config TARGET_T1040RDB
        select BOARD_LATE_INIT if CHAIN_OF_TRUST
        select SUPPORT_SPL
        select PHYS_64BIT
-       imply CMD_SATA
        imply PANIC_HANG
 
 config TARGET_T1040D4RDB
@@ -162,7 +161,6 @@ config TARGET_T1040D4RDB
        select BOARD_LATE_INIT if CHAIN_OF_TRUST
        select SUPPORT_SPL
        select PHYS_64BIT
-       imply CMD_SATA
        imply PANIC_HANG
 
 config TARGET_T1042RDB
@@ -171,7 +169,6 @@ config TARGET_T1042RDB
        select BOARD_LATE_INIT if CHAIN_OF_TRUST
        select SUPPORT_SPL
        select PHYS_64BIT
-       imply CMD_SATA
 
 config TARGET_T1042D4RDB
        bool "Support T1042D4RDB"
@@ -179,7 +176,6 @@ config TARGET_T1042D4RDB
        select BOARD_LATE_INIT if CHAIN_OF_TRUST
        select SUPPORT_SPL
        select PHYS_64BIT
-       imply CMD_SATA
        imply PANIC_HANG
 
 config TARGET_T1042RDB_PI
@@ -188,7 +184,6 @@ config TARGET_T1042RDB_PI
        select BOARD_LATE_INIT if CHAIN_OF_TRUST
        select SUPPORT_SPL
        select PHYS_64BIT
-       imply CMD_SATA
        imply PANIC_HANG
 
 config TARGET_T2080QDS
@@ -806,9 +801,7 @@ config ARCH_T1040
        select FSL_IFC
        imply CMD_MTDPARTS
        imply CMD_NAND
-       imply CMD_SATA
        imply CMD_REGINFO
-       imply FSL_SATA
 
 config ARCH_T1042
        bool
@@ -830,9 +823,7 @@ config ARCH_T1042
        select FSL_IFC
        imply CMD_MTDPARTS
        imply CMD_NAND
-       imply CMD_SATA
        imply CMD_REGINFO
-       imply FSL_SATA
 
 config ARCH_T2080
        bool
@@ -882,10 +873,8 @@ config ARCH_T4160
        select SYS_FSL_SEC_COMPAT_4
        select SYS_PPC64
        select FSL_IFC
-       imply CMD_SATA
        imply CMD_NAND
        imply CMD_REGINFO
-       imply FSL_SATA
 
 config ARCH_T4240
        bool

diff --git a/configs/MPC8315ERDB_defconfig b/configs/MPC8315ERDB_defconfig
index f03fec9..1a89835 100644 (file)
--- a/configs/MPC8315ERDB_defconfig
+++ b/configs/MPC8315ERDB_defconfig
@@ -118,7 +118,6 @@ CONFIG_CMD_IMLS=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_NAND=y
 CONFIG_CMD_PCI=y
-CONFIG_CMD_SATA=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y

diff --git a/configs/MPC837XERDB_SLAVE_defconfig b/configs/MPC837XERDB_SLAVE_defconfig
index ea84564..fa27cd0 100644 (file)
--- a/configs/MPC837XERDB_SLAVE_defconfig
+++ b/configs/MPC837XERDB_SLAVE_defconfig
@@ -111,7 +111,6 @@ CONFIG_CMD_IMLS=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_PCI=y
-CONFIG_CMD_SATA=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_MII=y
@@ -121,7 +120,6 @@ CONFIG_CMD_EXT2=y
 CONFIG_CMD_FAT=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_ADDR=0xFE080000
-CONFIG_FSL_SATA=y
 CONFIG_MTD_NOR_FLASH=y
 CONFIG_FLASH_CFI_DRIVER=y
 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y