[media] saa7134-input: key up events not sent after suspend/resume

On my AverMedia AverTV Studio 507, key up events are no longer sent after
a suspend-to-disk/resume cycle, resulting in "stuck" keys.

Apparently, for key up events to be generated, a certain GPIO pin must be set.
Currently it's set in saa7134_input_init1(), but that function is not called
on device resume. I suggest that code be moved to __saa7134_ir_start(), which
is called both on init and resume.

Signed-off-by: Vadim Solomin <vadic052@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c
index c9eff03..790d667 100644 (file)
--- a/drivers/media/video/saa7134/saa7134-input.c
+++ b/drivers/media/video/saa7134/saa7134-input.c
@@ -414,6 +414,41 @@ static int __saa7134_ir_start(void *priv)
        if (ir->running)
                return 0;
 
+       /* Moved here from saa7134_input_init1() because the latter
+        * is not called on device resume */
+       switch (dev->board) {
+       case SAA7134_BOARD_MD2819:
+       case SAA7134_BOARD_KWORLD_VSTREAM_XPERT:
+       case SAA7134_BOARD_AVERMEDIA_305:
+       case SAA7134_BOARD_AVERMEDIA_307:
+       case SAA7134_BOARD_AVERMEDIA_STUDIO_305:
+       case SAA7134_BOARD_AVERMEDIA_STUDIO_505:
+       case SAA7134_BOARD_AVERMEDIA_STUDIO_307:
+       case SAA7134_BOARD_AVERMEDIA_STUDIO_507:
+       case SAA7134_BOARD_AVERMEDIA_STUDIO_507UA:
+       case SAA7134_BOARD_AVERMEDIA_GO_007_FM:
+       case SAA7134_BOARD_AVERMEDIA_M102:
+       case SAA7134_BOARD_AVERMEDIA_GO_007_FM_PLUS:
+               /* Without this we won't receive key up events */
+               saa_setb(SAA7134_GPIO_GPMODE0, 0x4);
+               saa_setb(SAA7134_GPIO_GPSTATUS0, 0x4);
+               break;
+       case SAA7134_BOARD_AVERMEDIA_777:
+       case SAA7134_BOARD_AVERMEDIA_A16AR:
+               /* Without this we won't receive key up events */
+               saa_setb(SAA7134_GPIO_GPMODE1, 0x1);
+               saa_setb(SAA7134_GPIO_GPSTATUS1, 0x1);
+               break;
+       case SAA7134_BOARD_AVERMEDIA_A16D:
+               /* Without this we won't receive key up events */
+               saa_setb(SAA7134_GPIO_GPMODE1, 0x1);
+               saa_setb(SAA7134_GPIO_GPSTATUS1, 0x1);
+               break;
+       case SAA7134_BOARD_GOTVIEW_7135:
+               saa_setb(SAA7134_GPIO_GPMODE1, 0x80);
+               break;
+       }
+
        ir->running = true;
        ir->active = false;
 
@@ -548,9 +583,7 @@ int saa7134_input_init1(struct saa7134_dev *dev)
                mask_keycode = 0x0007C8;
                mask_keydown = 0x000010;
                polling      = 50; // ms
-               /* Set GPIO pin2 to high to enable the IR controller */
-               saa_setb(SAA7134_GPIO_GPMODE0, 0x4);
-               saa_setb(SAA7134_GPIO_GPSTATUS0, 0x4);
+               /* GPIO stuff moved to __saa7134_ir_start() */
                break;
        case SAA7134_BOARD_AVERMEDIA_M135A:
                ir_codes     = RC_MAP_AVERMEDIA_M135A;
@@ -572,18 +605,14 @@ int saa7134_input_init1(struct saa7134_dev *dev)
                mask_keycode = 0x02F200;
                mask_keydown = 0x000400;
                polling      = 50; // ms
-               /* Without this we won't receive key up events */
-               saa_setb(SAA7134_GPIO_GPMODE1, 0x1);
-               saa_setb(SAA7134_GPIO_GPSTATUS1, 0x1);
+               /* GPIO stuff moved to __saa7134_ir_start() */
                break;
        case SAA7134_BOARD_AVERMEDIA_A16D:
                ir_codes     = RC_MAP_AVERMEDIA_A16D;
                mask_keycode = 0x02F200;
                mask_keydown = 0x000400;
                polling      = 50; /* ms */
-               /* Without this we won't receive key up events */
-               saa_setb(SAA7134_GPIO_GPMODE1, 0x1);
-               saa_setb(SAA7134_GPIO_GPSTATUS1, 0x1);
+               /* GPIO stuff moved to __saa7134_ir_start() */
                break;
        case SAA7134_BOARD_KWORLD_TERMINATOR:
                ir_codes     = RC_MAP_PIXELVIEW;
@@ -635,7 +664,7 @@ int saa7134_input_init1(struct saa7134_dev *dev)
                mask_keycode = 0x0003CC;
                mask_keydown = 0x000010;
                polling      = 5; /* ms */
-               saa_setb(SAA7134_GPIO_GPMODE1, 0x80);
+               /* GPIO stuff moved to __saa7134_ir_start() */
                break;
        case SAA7134_BOARD_VIDEOMATE_TV_PVR:
        case SAA7134_BOARD_VIDEOMATE_GOLD_PLUS: