staging: sm750fb: add space before open brace

Fixes checkpatch.pl error:
ERROR: space required before the open brace '{'

Signed-off-by: Juston Li <juston.h.li@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/sm750fb/ddk750_display.c b/drivers/staging/sm750fb/ddk750_display.c
index 973dec3..c7171a4 100644 (file)
--- a/drivers/staging/sm750fb/ddk750_display.c
+++ b/drivers/staging/sm750fb/ddk750_display.c
@@ -132,7 +132,7 @@ static void setDisplayControl(int ctrl, int dispState)
 static void waitNextVerticalSync(int ctrl, int delay)
 {
        unsigned int status;
-       if (!ctrl){
+       if (!ctrl) {
                /* primary controller */
 
                /* Do not wait when the Primary PLL is off or display control is already off.
@@ -166,7 +166,7 @@ static void waitNextVerticalSync(int ctrl, int delay)
                        while (status == SYSTEM_CTRL_PANEL_VSYNC_INACTIVE);
                }
 
-       }else{
+       }else {
 
                /* Do not wait when the Primary PLL is off or display control is already off.
                           This will prevent the software to wait forever. */
@@ -233,14 +233,14 @@ static void swPanelPowerSequence(int disp, int delay)
 void ddk750_setLogicalDispOut(disp_output_t output)
 {
        unsigned int reg;
-       if (output & PNL_2_USAGE){
+       if (output & PNL_2_USAGE) {
                /* set panel path controller select */
                reg = PEEK32(PANEL_DISPLAY_CTRL);
                reg = FIELD_VALUE(reg, PANEL_DISPLAY_CTRL, SELECT, (output & PNL_2_MASK)>>PNL_2_OFFSET);
                POKE32(PANEL_DISPLAY_CTRL, reg);
        }
 
-       if (output & CRT_2_USAGE){
+       if (output & CRT_2_USAGE) {
                /* set crt path controller select */
                reg = PEEK32(CRT_DISPLAY_CTRL);
                reg = FIELD_VALUE(reg, CRT_DISPLAY_CTRL, SELECT, (output & CRT_2_MASK)>>CRT_2_OFFSET);
@@ -250,17 +250,17 @@ void ddk750_setLogicalDispOut(disp_output_t output)
 
        }
 
-       if (output & PRI_TP_USAGE){
+       if (output & PRI_TP_USAGE) {
                /* set primary timing and plane en_bit */
                setDisplayControl(0, (output&PRI_TP_MASK)>>PRI_TP_OFFSET);
        }
 
-       if (output & SEC_TP_USAGE){
+       if (output & SEC_TP_USAGE) {
                /* set secondary timing and plane en_bit*/
                setDisplayControl(1, (output&SEC_TP_MASK)>>SEC_TP_OFFSET);
        }
 
-       if (output & PNL_SEQ_USAGE){
+       if (output & PNL_SEQ_USAGE) {
                /* set  panel sequence */
                swPanelPowerSequence((output&PNL_SEQ_MASK)>>PNL_SEQ_OFFSET, 4);
        }

diff --git a/drivers/staging/sm750fb/ddk750_mode.c b/drivers/staging/sm750fb/ddk750_mode.c
index cfe528c..efc1fab 100644 (file)
--- a/drivers/staging/sm750fb/ddk750_mode.c
+++ b/drivers/staging/sm750fb/ddk750_mode.c
@@ -107,9 +107,9 @@ static int programModeRegisters(mode_parameter_t *pModeParam, pll_value_t *pll)
                                          FIELD_SET(0, CRT_DISPLAY_CTRL, PLANE, ENABLE);
 
 
-               if (getChipType() == SM750LE){
+               if (getChipType() == SM750LE) {
                        displayControlAdjust_SM750LE(pModeParam, ulTmpValue);
-               }else{
+               }else {
                        ulReg = PEEK32(CRT_DISPLAY_CTRL)
                                        & FIELD_CLEAR(CRT_DISPLAY_CTRL, VSYNC_PHASE)
                                        & FIELD_CLEAR(CRT_DISPLAY_CTRL, HSYNC_PHASE)
@@ -179,7 +179,7 @@ static int programModeRegisters(mode_parameter_t *pModeParam, pll_value_t *pll)
                }
 #endif
        }
-       else{
+       else {
                ret = -1;
        }
        return ret;
@@ -193,7 +193,7 @@ int ddk750_setModeTiming(mode_parameter_t *parm, clock_type_t clock)
        pll.clockType = clock;
 
        uiActualPixelClk = calcPllValue(parm->pixel_clock, &pll);
-       if (getChipType() == SM750LE){
+       if (getChipType() == SM750LE) {
                /* set graphic mode via IO method */
                outb_p(0x88, 0x3d4);
                outb_p(0x06, 0x3d5);

diff --git a/drivers/staging/sm750fb/ddk750_power.c b/drivers/staging/sm750fb/ddk750_power.c
index a2d9ee6..e2c0bb3 100644 (file)
--- a/drivers/staging/sm750fb/ddk750_power.c
+++ b/drivers/staging/sm750fb/ddk750_power.c
@@ -5,10 +5,10 @@
 void ddk750_setDPMS(DPMS_t state)
 {
        unsigned int value;
-       if (getChipType() == SM750LE){
+       if (getChipType() == SM750LE) {
                value = PEEK32(CRT_DISPLAY_CTRL);
                POKE32(CRT_DISPLAY_CTRL, FIELD_VALUE(value, CRT_DISPLAY_CTRL, DPMS, state));
-       }else{
+       }else {
                value = PEEK32(SYSTEM_CTRL);
                value= FIELD_VALUE(value, SYSTEM_CTRL, DPMS, state);
                POKE32(SYSTEM_CTRL, value);

diff --git a/drivers/staging/sm750fb/sm750_accel.c b/drivers/staging/sm750fb/sm750_accel.c
index 982cf1e..afe73e8 100644 (file)
--- a/drivers/staging/sm750fb/sm750_accel.c
+++ b/drivers/staging/sm750fb/sm750_accel.c
@@ -248,7 +248,7 @@ unsigned int rop2)   /* ROP value */
        Note that input pitch is BYTE value, but the 2D Pitch register uses
        pixel values. Need Byte to pixel conversion.
     */
-       if (Bpp == 3){
+       if (Bpp == 3) {
                        sx *= 3;
                        dx *= 3;
                        width *= 3;
@@ -271,7 +271,7 @@ unsigned int rop2)   /* ROP value */
        FIELD_VALUE(0, DE_WINDOW_WIDTH, DESTINATION, (dPitch/Bpp)) |
        FIELD_VALUE(0, DE_WINDOW_WIDTH, SOURCE,      (sPitch/Bpp))); /* dpr3c */
 
-       if (accel->de_wait() != 0){
+       if (accel->de_wait() != 0) {
                return -1;
        }
 
@@ -363,7 +363,7 @@ int hw_imageblit(struct lynx_accel *accel,
        Note that input pitch is BYTE value, but the 2D Pitch register uses
        pixel values. Need Byte to pixel conversion.
     */
-       if (bytePerPixel == 3){
+       if (bytePerPixel == 3) {
                dx *= 3;
                width *= 3;
                startBit *= 3;

diff --git a/drivers/staging/sm750fb/sm750_cursor.c b/drivers/staging/sm750fb/sm750_cursor.c
index 95cfb8f..3a21af9 100644 (file)
--- a/drivers/staging/sm750fb/sm750_cursor.c
+++ b/drivers/staging/sm750fb/sm750_cursor.c
@@ -143,14 +143,14 @@ void hw_cursor_setData(struct lynx_cursor *cursor,
                        if (opr & (0x80 >> j))
                        {       /* use fg color,id = 2 */
                                data |= 2 << (j*2);
-                       }else{
+                       }else {
                                /* use bg color,id = 1 */
                                data |= 1 << (j*2);
                        }
                }
 #else
-               for (j=0;j<8;j++){
-                       if (mask & (0x80>>j)){
+               for (j=0;j<8;j++) {
+                       if (mask & (0x80>>j)) {
                                if (rop == ROP_XOR)
                                        opr = mask ^ color;
                                else
@@ -173,7 +173,7 @@ void hw_cursor_setData(struct lynx_cursor *cursor,
                        /* need a return */
                        pstart += offset;
                        pbuffer = pstart;
-               }else{
+               }else {
                        pbuffer += sizeof(u16);
                }
 
@@ -223,13 +223,13 @@ void hw_cursor_setData2(struct lynx_cursor *cursor,
                        if (opr & (0x80 >> j))
                        {       /* use fg color,id = 2 */
                                data |= 2 << (j*2);
-                       }else{
+                       }else {
                                /* use bg color,id = 1 */
                                data |= 1 << (j*2);
                        }
                }
 #else
-               for (j=0;j<8;j++){
+               for (j=0;j<8;j++) {
                        if (mask & (1<<j))
                                data |= ((color & (1<<j))?1:2)<<(j*2);
                }
@@ -242,7 +242,7 @@ void hw_cursor_setData2(struct lynx_cursor *cursor,
                        /* need a return */
                        pstart += offset;
                        pbuffer = pstart;
-               }else{
+               }else {
                        pbuffer += sizeof(u16);
                }