-/* linux/drivers/usb/gadget/s3c-hsotg.c
+/**
+ * linux/drivers/usb/gadget/s3c-hsotg.c
*
* Copyright (c) 2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
-*/
+ */
#include <linux/kernel.h>
#include <linux/module.h>
"vusb_a", /* analog USB supply, 1.1V */
};
-/* EP0_MPS_LIMIT
+/*
+ * EP0_MPS_LIMIT
*
* Unfortunately there seems to be a limit of the amount of data that can
* be transferred by IN transactions on EP0. This is either 127 bytes or 3
int timeout;
u32 val;
- /* the ryu 2.6.24 release ahs
- writel(0x1C0, hsotg->regs + S3C_GRXFSIZ);
- writel(S3C_GNPTXFSIZ_NPTxFStAddr(0x200) |
- S3C_GNPTXFSIZ_NPTxFDep(0x1C0),
- hsotg->regs + S3C_GNPTXFSIZ);
- */
-
/* set FIFO sizes to 2048/1024 */
writel(2048, hsotg->regs + S3C_GRXFSIZ);
S3C_GNPTXFSIZ_NPTxFDep(1024),
hsotg->regs + S3C_GNPTXFSIZ);
- /* arange all the rest of the TX FIFOs, as some versions of this
+ /*
+ * arange all the rest of the TX FIFOs, as some versions of this
* block have overlapping default addresses. This also ensures
* that if the settings have been changed, then they are set to
- * known values. */
+ * known values.
+ */
/* start at the end of the GNPTXFSIZ, rounded up */
addr = 2048 + 1024;
size = 768;
- /* currently we allocate TX FIFOs for all possible endpoints,
- * and assume that they are all the same size. */
+ /*
+ * currently we allocate TX FIFOs for all possible endpoints,
+ * and assume that they are all the same size.
+ */
for (ep = 1; ep <= 15; ep++) {
val = addr;
writel(val, hsotg->regs + S3C_DPTXFSIZn(ep));
}
- /* according to p428 of the design guide, we need to ensure that
- * all fifos are flushed before continuing */
+ /*
+ * according to p428 of the design guide, we need to ensure that
+ * all fifos are flushed before continuing
+ */
writel(S3C_GRSTCTL_TxFNum(0x10) | S3C_GRSTCTL_TxFFlsh |
S3C_GRSTCTL_RxFFlsh, hsotg->regs + S3C_GRSTCTL);
*
* This is the reverse of s3c_hsotg_map_dma(), called for the completion
* of a request to ensure the buffer is ready for access by the caller.
-*/
+ */
static void s3c_hsotg_unmap_dma(struct s3c_hsotg *hsotg,
struct s3c_hsotg_ep *hs_ep,
struct s3c_hsotg_req *hs_req)
* otherwise -ENOSPC is returned if the FIFO space was used up.
*
* This routine is only needed for PIO
-*/
+ */
static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg,
struct s3c_hsotg_ep *hs_ep,
struct s3c_hsotg_req *hs_req)
int size_left;
int size_done;
- /* work out how much data was loaded so we can calculate
- * how much data is left in the fifo. */
+ /*
+ * work out how much data was loaded so we can calculate
+ * how much data is left in the fifo.
+ */
size_left = S3C_DxEPTSIZ_XferSize_GET(epsize);
- /* if shared fifo, we cannot write anything until the
+ /*
+ * if shared fifo, we cannot write anything until the
* previous data has been completely sent.
*/
if (hs_ep->fifo_load != 0) {
dev_dbg(hsotg->dev, "%s: GNPTXSTS=%08x, can=%d, to=%d, mps %d\n",
__func__, gnptxsts, can_write, to_write, hs_ep->ep.maxpacket);
- /* limit to 512 bytes of data, it seems at least on the non-periodic
+ /*
+ * limit to 512 bytes of data, it seems at least on the non-periodic
* FIFO, requests of >512 cause the endpoint to get stuck with a
* fragment of the end of the transfer in it.
*/
if (can_write > 512)
can_write = 512;
- /* limit the write to one max-packet size worth of data, but allow
+ /*
+ * limit the write to one max-packet size worth of data, but allow
* the transfer to return that it did not run out of fifo space
- * doing it. */
+ * doing it.
+ */
if (to_write > hs_ep->ep.maxpacket) {
to_write = hs_ep->ep.maxpacket;
to_write = can_write;
pkt_round = to_write % hs_ep->ep.maxpacket;
- /* Not sure, but we probably shouldn't be writing partial
- * packets into the FIFO, so round the write down to an
+ /*
+ * Round the write down to an
* exact number of packets.
*
* Note, we do not currently check to see if we can ever
if (pkt_round)
to_write -= pkt_round;
- /* enable correct FIFO interrupt to alert us when there
- * is more room left. */
+ /*
+ * enable correct FIFO interrupt to alert us when there
+ * is more room left.
+ */
s3c_hsotg_en_gsint(hsotg,
periodic ? S3C_GINTSTS_PTxFEmp :
maxpkt--;
maxsize--;
- /* constrain by packet count if maxpkts*pktsize is greater
- * than the length register size. */
+ /*
+ * constrain by packet count if maxpkts*pktsize is greater
+ * than the length register size.
+ */
if ((maxpkt * hs_ep->ep.maxpacket) < maxsize)
maxsize = maxpkt * hs_ep->ep.maxpacket;
epsize = 0;
if (index != 0 && ureq->zero) {
- /* test for the packets being exactly right for the
- * transfer */
+ /*
+ * test for the packets being exactly right for the
+ * transfer
+ */
if (length == (packets * hs_ep->ep.maxpacket))
packets++;
if (using_dma(hsotg) && !continuing) {
unsigned int dma_reg;
- /* write DMA address to control register, buffer already
- * synced by s3c_hsotg_ep_queue(). */
+ /*
+ * write DMA address to control register, buffer already
+ * synced by s3c_hsotg_ep_queue().
+ */
dma_reg = dir_in ? S3C_DIEPDMA(index) : S3C_DOEPDMA(index);
writel(ureq->dma, hsotg->regs + dma_reg);
dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x\n", __func__, ctrl);
writel(ctrl, hsotg->regs + epctrl_reg);
- /* set these, it seems that DMA support increments past the end
+ /*
+ * set these, it seems that DMA support increments past the end
* of the packet buffer so we need to calculate the length from
- * this information. */
+ * this information.
+ */
hs_ep->size_loaded = length;
hs_ep->last_load = ureq->actual;
s3c_hsotg_write_fifo(hsotg, hs_ep, hs_req);
}
- /* clear the INTknTXFEmpMsk when we start request, more as a aide
- * to debugging to see what is going on. */
+ /*
+ * clear the INTknTXFEmpMsk when we start request, more as a aide
+ * to debugging to see what is going on.
+ */
if (dir_in)
writel(S3C_DIEPMSK_INTknTXFEmpMsk,
hsotg->regs + S3C_DIEPINT(index));
- /* Note, trying to clear the NAK here causes problems with transmit
- * on the S3C6400 ending up with the TXFIFO becoming full. */
+ /*
+ * Note, trying to clear the NAK here causes problems with transmit
+ * on the S3C6400 ending up with the TXFIFO becoming full.
+ */
/* check ep is enabled */
if (!(readl(hsotg->regs + epctrl_reg) & S3C_DxEPCTL_EPEna))
* then ensure the buffer has been synced to memory. If our buffer has no
* DMA memory, then we map the memory and mark our request to allow us to
* cleanup on completion.
-*/
+ */
static int s3c_hsotg_map_dma(struct s3c_hsotg *hsotg,
struct s3c_hsotg_ep *hs_ep,
struct usb_request *req)
*
* Convert the given wIndex into a pointer to an driver endpoint
* structure, or return NULL if it is not a valid endpoint.
-*/
+ */
static struct s3c_hsotg_ep *ep_from_windex(struct s3c_hsotg *hsotg,
u32 windex)
{
ctrl->bRequest, ctrl->bRequestType,
ctrl->wValue, ctrl->wLength);
- /* record the direction of the request, for later use when enquing
- * packets onto EP0. */
+ /*
+ * record the direction of the request, for later use when enquing
+ * packets onto EP0.
+ */
ep0->dir_in = (ctrl->bRequestType & USB_DIR_IN) ? 1 : 0;
dev_dbg(hsotg->dev, "ctrl: dir_in=%d\n", ep0->dir_in);
- /* if we've no data with this request, then the last part of the
- * transaction is going to implicitly be IN. */
+ /*
+ * if we've no data with this request, then the last part of the
+ * transaction is going to implicitly be IN.
+ */
if (ctrl->wLength == 0)
ep0->dir_in = 1;
dev_dbg(hsotg->dev, "driver->setup() ret %d\n", ret);
}
- /* the request is either unhandlable, or is not formatted correctly
+ /*
+ * the request is either unhandlable, or is not formatted correctly
* so respond with a STALL for the status stage to indicate failure.
*/
dev_dbg(hsotg->dev, "ep0 stall (dir=%d)\n", ep0->dir_in);
reg = (ep0->dir_in) ? S3C_DIEPCTL0 : S3C_DOEPCTL0;
- /* S3C_DxEPCTL_Stall will be cleared by EP once it has
- * taken effect, so no need to clear later. */
+ /*
+ * S3C_DxEPCTL_Stall will be cleared by EP once it has
+ * taken effect, so no need to clear later.
+ */
ctrl = readl(hsotg->regs + reg);
ctrl |= S3C_DxEPCTL_Stall;
"written DxEPCTL=0x%08x to %08x (DxEPCTL=0x%08x)\n",
ctrl, reg, readl(hsotg->regs + reg));
- /* don't believe we need to anything more to get the EP
- * to reply with a STALL packet */
+ /*
+ * don't believe we need to anything more to get the EP
+ * to reply with a STALL packet
+ */
}
}
ret = s3c_hsotg_ep_queue(&hsotg->eps[0].ep, req, GFP_ATOMIC);
if (ret < 0) {
dev_err(hsotg->dev, "%s: failed queue (%d)\n", __func__, ret);
- /* Don't think there's much we can do other than watch the
- * driver fail. */
+ /*
+ * Don't think there's much we can do other than watch the
+ * driver fail.
+ */
}
}
* on the endpoint.
*
* Note, expects the ep to already be locked as appropriate.
-*/
+ */
static void s3c_hsotg_complete_request(struct s3c_hsotg *hsotg,
struct s3c_hsotg_ep *hs_ep,
struct s3c_hsotg_req *hs_req,
dev_dbg(hsotg->dev, "complete: ep %p %s, req %p, %d => %p\n",
hs_ep, hs_ep->ep.name, hs_req, result, hs_req->req.complete);
- /* only replace the status if we've not already set an error
- * from a previous transaction */
+ /*
+ * only replace the status if we've not already set an error
+ * from a previous transaction
+ */
if (hs_req->req.status == -EINPROGRESS)
hs_req->req.status = result;
if (using_dma(hsotg))
s3c_hsotg_unmap_dma(hsotg, hs_ep, hs_req);
- /* call the complete request with the locks off, just in case the
- * request tries to queue more work for this endpoint. */
+ /*
+ * call the complete request with the locks off, just in case the
+ * request tries to queue more work for this endpoint.
+ */
if (hs_req->req.complete) {
spin_unlock(&hs_ep->lock);
spin_lock(&hs_ep->lock);
}
- /* Look to see if there is anything else to do. Note, the completion
+ /*
+ * Look to see if there is anything else to do. Note, the completion
* of the previous request may have caused a new request to be started
- * so be careful when doing this. */
+ * so be careful when doing this.
+ */
if (!hs_ep->req && result >= 0) {
restart = !list_empty(&hs_ep->queue);
*
* See s3c_hsotg_complete_request(), but called with the endpoint's
* lock held.
-*/
+ */
static void s3c_hsotg_complete_request_lock(struct s3c_hsotg *hsotg,
struct s3c_hsotg_ep *hs_ep,
struct s3c_hsotg_req *hs_req,
__func__, to_read, max_req, read_ptr, hs_req->req.length);
if (to_read > max_req) {
- /* more data appeared than we where willing
+ /*
+ * more data appeared than we where willing
* to deal with in this request.
*/
hs_req->req.actual += to_read;
to_read = DIV_ROUND_UP(to_read, 4);
- /* note, we might over-write the buffer end by 3 bytes depending on
- * alignment of the data. */
+ /*
+ * note, we might over-write the buffer end by 3 bytes depending on
+ * alignment of the data.
+ */
readsl(fifo, hs_req->req.buf + read_ptr, to_read);
spin_unlock(&hs_ep->lock);
* The RXFIFO has delivered an OutDone event, which means that the data
* transfer for an OUT endpoint has been completed, either by a short
* packet or by the finish of a transfer.
-*/
+ */
static void s3c_hsotg_handle_outdone(struct s3c_hsotg *hsotg,
int epnum, bool was_setup)
{
if (using_dma(hsotg)) {
unsigned size_done;
- /* Calculate the size of the transfer by checking how much
+ /*
+ * Calculate the size of the transfer by checking how much
* is left in the endpoint size register and then working it
* out from the amount we loaded for the transfer.
*
dev_dbg(hsotg->dev, "%s: got %d/%d (short not ok) => error\n",
__func__, req->actual, req->length);
- /* todo - what should we return here? there's no one else
- * even bothering to check the status. */
+ /*
+ * todo - what should we return here? there's no one else
+ * even bothering to check the status.
+ */
}
if (epnum == 0) {
* @hsotg: The device instance
*
* Return the current frame number
-*/
+ */
static u32 s3c_hsotg_read_frameno(struct s3c_hsotg *hsotg)
{
u32 dsts;
/**
* s3c_hsotg_ep0_mps - turn max packet size into register setting
* @mps: The maximum packet size in bytes.
-*/
+ */
static u32 s3c_hsotg_ep0_mps(unsigned int mps)
{
switch (mps) {
hs_ep->ep.maxpacket = mps;
- /* update both the in and out endpoint controldir_ registers, even
- * if one of the directions may not be in use. */
+ /*
+ * update both the in and out endpoint controldir_ registers, even
+ * if one of the directions may not be in use.
+ */
reg = readl(regs + S3C_DIEPCTL(ep));
reg &= ~S3C_DxEPCTL_MPS_MASK;
return;
}
- /* Calculate the size of the transfer by checking how much is left
+ /*
+ * Calculate the size of the transfer by checking how much is left
* in the endpoint size register and then working it out from
* the amount we loaded for the transfer.
*
* @dir_in: Set if this is an IN endpoint
*
* Process and clear any interrupt pending for an individual endpoint
-*/
+ */
static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx,
int dir_in)
{
__func__, readl(hsotg->regs + epctl_reg),
readl(hsotg->regs + epsiz_reg));
- /* we get OutDone from the FIFO, so we only need to look
- * at completing IN requests here */
+ /*
+ * we get OutDone from the FIFO, so we only need to look
+ * at completing IN requests here
+ */
if (dir_in) {
s3c_hsotg_complete_in(hsotg, hs_ep);
if (idx == 0 && !hs_ep->req)
s3c_hsotg_enqueue_setup(hsotg);
} else if (using_dma(hsotg)) {
- /* We're using DMA, we need to fire an OutDone here
- * as we ignore the RXFIFO. */
+ /*
+ * We're using DMA, we need to fire an OutDone here
+ * as we ignore the RXFIFO.
+ */
s3c_hsotg_handle_outdone(hsotg, idx, false);
}
dev_dbg(hsotg->dev, "%s: Setup/Timeout\n", __func__);
if (using_dma(hsotg) && idx == 0) {
- /* this is the notification we've received a
+ /*
+ * this is the notification we've received a
* setup packet. In non-DMA mode we'd get this
* from the RXFIFO, instead we need to process
- * the setup here. */
+ * the setup here.
+ */
if (dir_in)
WARN_ON_ONCE(1);
dev_dbg(hsotg->dev, "%s: B2BSetup/INEPNakEff\n", __func__);
if (dir_in) {
- /* not sure if this is important, but we'll clear it anyway
- */
+ /* not sure if this is important, but we'll clear it anyway */
if (ints & S3C_DIEPMSK_INTknTXFEmpMsk) {
dev_dbg(hsotg->dev, "%s: ep%d: INTknTXFEmpMsk\n",
__func__, idx);
*
* Handle updating the device settings after the enumeration phase has
* been completed.
-*/
+ */
static void s3c_hsotg_irq_enumdone(struct s3c_hsotg *hsotg)
{
u32 dsts = readl(hsotg->regs + S3C_DSTS);
int ep0_mps = 0, ep_mps;
- /* This should signal the finish of the enumeration phase
+ /*
+ * This should signal the finish of the enumeration phase
* of the USB handshaking, so we should now know what rate
- * we connected at. */
+ * we connected at.
+ */
dev_dbg(hsotg->dev, "EnumDone (DSTS=0x%08x)\n", dsts);
- /* note, since we're limited by the size of transfer on EP0, and
+ /*
+ * note, since we're limited by the size of transfer on EP0, and
* it seems IN transfers must be a even number of packets we do
- * not advertise a 64byte MPS on EP0. */
+ * not advertise a 64byte MPS on EP0.
+ */
/* catch both EnumSpd_FS and EnumSpd_FS48 */
switch (dsts & S3C_DSTS_EnumSpd_MASK) {
case S3C_DSTS_EnumSpd_LS:
hsotg->gadget.speed = USB_SPEED_LOW;
- /* note, we don't actually support LS in this driver at the
+ /*
+ * note, we don't actually support LS in this driver at the
* moment, and the documentation seems to imply that it isn't
* supported by the PHYs on some of the devices.
*/
dev_info(hsotg->dev, "new device is %s\n",
usb_speed_string(hsotg->gadget.speed));
- /* we should now know the maximum packet size for an
- * endpoint, so set the endpoints to a default value. */
+ /*
+ * we should now know the maximum packet size for an
+ * endpoint, so set the endpoints to a default value.
+ */
if (ep0_mps) {
int i;
spin_lock_irqsave(&ep->lock, flags);
list_for_each_entry_safe(req, treq, &ep->queue, queue) {
- /* currently, we can't do much about an already
- * running request on an in endpoint */
+ /*
+ * currently, we can't do much about an already
+ * running request on an in endpoint
+ */
if (ep->req == req && ep->dir_in && !force)
continue;
* The device has been disconnected. Remove all current
* transactions and signal the gadget driver that this
* has happened.
-*/
+ */
static void s3c_hsotg_disconnect(struct s3c_hsotg *hsotg)
{
unsigned ep;
* @hsotg: The device state
*
* Issue a soft reset to the core, and await the core finishing it.
-*/
+ */
static int s3c_hsotg_corereset(struct s3c_hsotg *hsotg)
{
int timeout;
return 0;
}
+/**
+ * s3c_hsotg_core_init - issue softreset to the core
+ * @hsotg: The device state
+ *
+ * Issue a soft reset to the core, and await the core finishing it.
+ */
static void s3c_hsotg_core_init(struct s3c_hsotg *hsotg)
{
s3c_hsotg_corereset(hsotg);
if (gintsts & S3C_GINTSTS_NPTxFEmp) {
dev_dbg(hsotg->dev, "NPTxFEmp\n");
- /* Disable the interrupt to stop it happening again
+ /*
+ * Disable the interrupt to stop it happening again
* unless one of these endpoint routines decides that
- * it needs re-enabling */
+ * it needs re-enabling
+ */
s3c_hsotg_disable_gsint(hsotg, S3C_GINTSTS_NPTxFEmp);
s3c_hsotg_irq_fifoempty(hsotg, false);
}
if (gintsts & S3C_GINTSTS_RxFLvl) {
- /* note, since GINTSTS_RxFLvl doubles as FIFO-not-empty,
+ /*
+ * note, since GINTSTS_RxFLvl doubles as FIFO-not-empty,
* we need to retry s3c_hsotg_handle_rx if this is still
- * set. */
+ * set.
+ */
s3c_hsotg_handle_rx(hsotg);
}
s3c_hsotg_disconnect(hsotg);
}
- /* these next two seem to crop-up occasionally causing the core
+ /*
+ * these next two seem to crop-up occasionally causing the core
* to shutdown the USB transfer, so try clearing them and logging
- * the occurrence. */
+ * the occurrence.
+ */
if (gintsts & S3C_GINTSTS_GOUTNakEff) {
dev_info(hsotg->dev, "GOUTNakEff triggered\n");
s3c_hsotg_dump(hsotg);
}
- /* if we've had fifo events, we should try and go around the
- * loop again to see if there's any point in returning yet. */
+ /*
+ * if we've had fifo events, we should try and go around the
+ * loop again to see if there's any point in returning yet.
+ */
if (gintsts & IRQ_RETRY_MASK && --retry_count > 0)
goto irq_retry;
* @desc: The USB endpoint descriptor to configure with.
*
* This is called from the USB gadget code's usb_ep_enable().
-*/
+ */
static int s3c_hsotg_ep_enable(struct usb_ep *ep,
const struct usb_endpoint_descriptor *desc)
{
epctrl &= ~(S3C_DxEPCTL_EPType_MASK | S3C_DxEPCTL_MPS_MASK);
epctrl |= S3C_DxEPCTL_MPS(mps);
- /* mark the endpoint as active, otherwise the core may ignore
- * transactions entirely for this endpoint */
+ /*
+ * mark the endpoint as active, otherwise the core may ignore
+ * transactions entirely for this endpoint
+ */
epctrl |= S3C_DxEPCTL_USBActEp;
- /* set the NAK status on the endpoint, otherwise we might try and
+ /*
+ * set the NAK status on the endpoint, otherwise we might try and
* do something with data that we've yet got a request to process
* since the RXFIFO will take data for an endpoint even if the
* size register hasn't been set.
case USB_ENDPOINT_XFER_INT:
if (dir_in) {
- /* Allocate our TxFNum by simply using the index
+ /*
+ * Allocate our TxFNum by simply using the index
* of the endpoint for the moment. We could do
* something better if the host indicates how
- * many FIFOs we are expecting to use. */
+ * many FIFOs we are expecting to use.
+ */
hs_ep->periodic = 1;
epctrl |= S3C_DxEPCTL_TxFNum(index);
break;
}
- /* if the hardware has dedicated fifos, we must give each IN EP
+ /*
+ * if the hardware has dedicated fifos, we must give each IN EP
* a unique tx-fifo even if it is non-periodic.
*/
if (dir_in && hsotg->dedicated_fifos)
return ret;
}
+/**
+ * s3c_hsotg_ep_disable - disable given endpoint
+ * @ep: The endpoint to disable.
+ */
static int s3c_hsotg_ep_disable(struct usb_ep *ep)
{
struct s3c_hsotg_ep *hs_ep = our_ep(ep);
* on_list - check request is on the given endpoint
* @ep: The endpoint to check.
* @test: The request to test if it is on the endpoint.
-*/
+ */
static bool on_list(struct s3c_hsotg_ep *ep, struct s3c_hsotg_req *test)
{
struct s3c_hsotg_req *req, *treq;
return false;
}
+/**
+ * s3c_hsotg_ep_dequeue - dequeue given endpoint
+ * @ep: The endpoint to dequeue.
+ * @req: The request to be removed from a queue.
+ */
static int s3c_hsotg_ep_dequeue(struct usb_ep *ep, struct usb_request *req)
{
struct s3c_hsotg_req *hs_req = our_req(req);
return 0;
}
+/**
+ * s3c_hsotg_ep_sethalt - set halt on a given endpoint
+ * @ep: The endpoint to set halt.
+ * @value: Set or unset the halt.
+ */
static int s3c_hsotg_ep_sethalt(struct usb_ep *ep, int value)
{
struct s3c_hsotg_ep *hs_ep = our_ep(ep);
/**
* s3c_hsotg_phy_enable - enable platform phy dev
- *
- * @param: The driver state
+ * @hsotg: The driver state
*
* A wrapper for platform code responsible for controlling
* low-level USB code
/**
* s3c_hsotg_phy_disable - disable platform phy dev
- *
- * @param: The driver state
+ * @hsotg: The driver state
*
* A wrapper for platform code responsible for controlling
* low-level USB code
hsotg->plat->phy_exit(pdev, hsotg->plat->phy_type);
}
+/**
+ * s3c_hsotg_init - initalize the usb core
+ * @hsotg: The driver state
+ */
static void s3c_hsotg_init(struct s3c_hsotg *hsotg)
{
/* unmask subset of endpoint interrupts */
hsotg->regs + S3C_GAHBCFG);
}
+/**
+ * s3c_hsotg_udc_start - prepare the udc for work
+ * @gadget: The usb gadget state
+ * @driver: The usb gadget driver
+ *
+ * Perform initialization to prepare udc device and driver
+ * to work.
+ */
static int s3c_hsotg_udc_start(struct usb_gadget *gadget,
struct usb_gadget_driver *driver)
{
return ret;
}
+/**
+ * s3c_hsotg_udc_stop - stop the udc
+ * @gadget: The usb gadget state
+ * @driver: The usb gadget driver
+ *
+ * Stop udc hw block and stay tunned for future transmissions
+ */
static int s3c_hsotg_udc_stop(struct usb_gadget *gadget,
struct usb_gadget_driver *driver)
{
return 0;
}
+/**
+ * s3c_hsotg_gadget_getframe - read the frame number
+ * @gadget: The usb gadget state
+ *
+ * Read the {micro} frame number
+ */
static int s3c_hsotg_gadget_getframe(struct usb_gadget *gadget)
{
return s3c_hsotg_read_frameno(to_hsotg(gadget));
hs_ep->ep.maxpacket = epnum ? 512 : EP0_MPS_LIMIT;
hs_ep->ep.ops = &s3c_hsotg_ep_ops;
- /* Read the FIFO size for the Periodic TX FIFO, even if we're
+ /*
+ * Read the FIFO size for the Periodic TX FIFO, even if we're
* an OUT endpoint, we may as well do this if in future the
* code is changed to make each endpoint's direction changeable.
*/
ptxfifo = readl(hsotg->regs + S3C_DPTXFSIZn(epnum));
hs_ep->fifo_size = S3C_DPTXFSIZn_DPTxFSize_GET(ptxfifo) * 4;
- /* if we're using dma, we need to set the next-endpoint pointer
+ /*
+ * if we're using dma, we need to set the next-endpoint pointer
* to be something valid.
*/
dev_info(hsotg->dev, "%s fifos\n",
hsotg->dedicated_fifos ? "dedicated" : "shared");
-
}
+/**
+ * s3c_hsotg_dump - dump state of the udc
+ * @param: The device state
+ */
static void s3c_hsotg_dump(struct s3c_hsotg *hsotg)
{
#ifdef DEBUG
#endif
}
-
/**
* state_show - debugfs: show overall driver and device state.
* @seq: The seq file to write to.
*
* Show the FIFO information for the overall fifo and all the
* periodic transmission FIFOs.
-*/
+ */
static int fifo_show(struct seq_file *seq, void *v)
{
struct s3c_hsotg *hsotg = seq->private;
*
* This debugfs entry shows the state of the given endpoint (one is
* registered for each available).
-*/
+ */
static int ep_show(struct seq_file *seq, void *v)
{
struct s3c_hsotg_ep *ep = seq->private;
* about the state of the system. The directory name is created
* with the same name as the device itself, in case we end up
* with multiple blocks in future systems.
-*/
+ */
static void __devinit s3c_hsotg_create_debug(struct s3c_hsotg *hsotg)
{
struct dentry *root;
* @hsotg: The driver state
*
* Cleanup (remove) the debugfs files for use on module exit.
-*/
+ */
static void __devexit s3c_hsotg_delete_debug(struct s3c_hsotg *hsotg)
{
unsigned epidx;
debugfs_remove(hsotg->debug_root);
}
+/**
+ * s3c_hsotg_probe - probe function for hsotg driver
+ * @pdev: The platform information for the driver
+ */
static int __devinit s3c_hsotg_probe(struct platform_device *pdev)
{
struct s3c_hsotg_plat *plat = pdev->dev.platform_data;
return ret;
}
+/**
+ * s3c_hsotg_remove - remove function for hsotg driver
+ * @pdev: The platform information for the driver
+ */
static int __devexit s3c_hsotg_remove(struct platform_device *pdev)
{
struct s3c_hsotg *hsotg = platform_get_drvdata(pdev);
projects / platform / kernel / linux-exynos.git / commitdiff