--- /dev/null
+/*
+ * Support for SuperH MigoR Quarter VGA LCD Panel
+ *
+ * Copyright (C) 2008 Magnus Damm
+ *
+ * Based on lcd_powertip.c from Kenati Technologies Pvt Ltd.
+ * Copyright (c) 2007 Ujjwal Pande <ujjwal@kenati.com>,
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <asm/sh_mobile_lcdc.h>
+#include <asm/migor.h>
+
+/* LCD Module is a PH240320T according to board schematics. This module
+ * is made up of a 240x320 LCD hooked up to a R61505U (or HX8347-A01?)
+ * Driver IC. This IC is connected to the SH7722 built-in LCDC using a
+ * SYS-80 interface configured in 16 bit mode.
+ *
+ * Index 0: "Device Code Read" returns 0x1505.
+ */
+
+static void reset_lcd_module(void)
+{
+ ctrl_outb(ctrl_inb(PORT_PHDR) & ~0x04, PORT_PHDR);
+ mdelay(2);
+ ctrl_outb(ctrl_inb(PORT_PHDR) | 0x04, PORT_PHDR);
+ mdelay(1);
+}
+
+/* DB0-DB7 are connected to D1-D8, and DB8-DB15 to D10-D17 */
+
+static unsigned long adjust_reg18(unsigned short data)
+{
+ unsigned long tmp1, tmp2;
+
+ tmp1 = (data<<1 | 0x00000001) & 0x000001FF;
+ tmp2 = (data<<2 | 0x00000200) & 0x0003FE00;
+ return tmp1 | tmp2;
+}
+
+static void write_reg(void *sys_ops_handle,
+ struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
+ unsigned short reg, unsigned short data)
+{
+ sys_ops->write_index(sys_ops_handle, adjust_reg18(reg << 8 | data));
+}
+
+static void write_reg16(void *sys_ops_handle,
+ struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
+ unsigned short reg, unsigned short data)
+{
+ sys_ops->write_index(sys_ops_handle, adjust_reg18(reg));
+ sys_ops->write_data(sys_ops_handle, adjust_reg18(data));
+}
+
+static unsigned long read_reg16(void *sys_ops_handle,
+ struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
+ unsigned short reg)
+{
+ unsigned long data;
+
+ sys_ops->write_index(sys_ops_handle, adjust_reg18(reg));
+ data = sys_ops->read_data(sys_ops_handle);
+ return ((data >> 1) & 0xff) | ((data >> 2) & 0xff00);
+}
+
+static void migor_lcd_qvga_seq(void *sys_ops_handle,
+ struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
+ unsigned short const *data, int no_data)
+{
+ int i;
+
+ for (i = 0; i < no_data; i += 2)
+ write_reg16(sys_ops_handle, sys_ops, data[i], data[i + 1]);
+}
+
+static const unsigned short sync_data[] = {
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+};
+
+static const unsigned short magic0_data[] = {
+ 0x0060, 0x2700, 0x0008, 0x0808, 0x0090, 0x001A, 0x0007, 0x0001,
+ 0x0017, 0x0001, 0x0019, 0x0000, 0x0010, 0x17B0, 0x0011, 0x0116,
+ 0x0012, 0x0198, 0x0013, 0x1400, 0x0029, 0x000C, 0x0012, 0x01B8,
+};
+
+static const unsigned short magic1_data[] = {
+ 0x0030, 0x0307, 0x0031, 0x0303, 0x0032, 0x0603, 0x0033, 0x0202,
+ 0x0034, 0x0202, 0x0035, 0x0202, 0x0036, 0x1F1F, 0x0037, 0x0303,
+ 0x0038, 0x0303, 0x0039, 0x0603, 0x003A, 0x0202, 0x003B, 0x0102,
+ 0x003C, 0x0204, 0x003D, 0x0000, 0x0001, 0x0100, 0x0002, 0x0300,
+ 0x0003, 0x5028, 0x0020, 0x00ef, 0x0021, 0x0000, 0x0004, 0x0000,
+ 0x0009, 0x0000, 0x000A, 0x0008, 0x000C, 0x0000, 0x000D, 0x0000,
+ 0x0015, 0x8000,
+};
+
+static const unsigned short magic2_data[] = {
+ 0x0061, 0x0001, 0x0092, 0x0100, 0x0093, 0x0001, 0x0007, 0x0021,
+};
+
+static const unsigned short magic3_data[] = {
+ 0x0010, 0x16B0, 0x0011, 0x0111, 0x0007, 0x0061,
+};
+
+int migor_lcd_qvga_setup(void *board_data, void *sohandle,
+ struct sh_mobile_lcdc_sys_bus_ops *so)
+{
+ unsigned long xres = 320;
+ unsigned long yres = 240;
+ int k;
+
+ reset_lcd_module();
+ migor_lcd_qvga_seq(sohandle, so, sync_data, ARRAY_SIZE(sync_data));
+
+ if (read_reg16(sohandle, so, 0) != 0x1505)
+ return -ENODEV;
+
+ pr_info("Migo-R QVGA LCD Module detected.\n");
+
+ migor_lcd_qvga_seq(sohandle, so, sync_data, ARRAY_SIZE(sync_data));
+ write_reg16(sohandle, so, 0x00A4, 0x0001);
+ mdelay(10);
+
+ migor_lcd_qvga_seq(sohandle, so, magic0_data, ARRAY_SIZE(magic0_data));
+ mdelay(100);
+
+ migor_lcd_qvga_seq(sohandle, so, magic1_data, ARRAY_SIZE(magic1_data));
+ write_reg16(sohandle, so, 0x0050, 0xef - (yres - 1));
+ write_reg16(sohandle, so, 0x0051, 0x00ef);
+ write_reg16(sohandle, so, 0x0052, 0x0000);
+ write_reg16(sohandle, so, 0x0053, xres - 1);
+
+ migor_lcd_qvga_seq(sohandle, so, magic2_data, ARRAY_SIZE(magic2_data));
+ mdelay(10);
+
+ migor_lcd_qvga_seq(sohandle, so, magic3_data, ARRAY_SIZE(magic3_data));
+ mdelay(40);
+
+ /* clear GRAM to avoid displaying garbage */
+
+ write_reg16(sohandle, so, 0x0020, 0x0000); /* horiz addr */
+ write_reg16(sohandle, so, 0x0021, 0x0000); /* vert addr */
+
+ for (k = 0; k < (xres * 256); k++) /* yes, 256 words per line */
+ write_reg16(sohandle, so, 0x0022, 0x0000);
+
+ write_reg16(sohandle, so, 0x0020, 0x0000); /* reset horiz addr */
+ write_reg16(sohandle, so, 0x0021, 0x0000); /* reset vert addr */
+ write_reg16(sohandle, so, 0x0007, 0x0173);
+ mdelay(40);
+
+ /* enable display */
+ write_reg(sohandle, so, 0x00, 0x22);
+ mdelay(100);
+ return 0;
+}
#include <asm/machvec.h>
#include <asm/io.h>
#include <asm/sh_keysc.h>
+#include <asm/sh_mobile_lcdc.h>
#include <asm/migor.h>
/* Address IRQ Size Bus Description
}
};
+static struct sh_mobile_lcdc_info sh_mobile_lcdc_info = {
+#ifdef CONFIG_SH_MIGOR_RTA_WVGA
+ .clock_source = LCDC_CLK_BUS,
+ .ch[0] = {
+ .chan = LCDC_CHAN_MAINLCD,
+ .bpp = 16,
+ .interface_type = RGB16,
+ .clock_divider = 2,
+ .lcd_cfg = {
+ .name = "LB070WV1",
+ .xres = 800,
+ .yres = 480,
+ .left_margin = 64,
+ .right_margin = 16,
+ .hsync_len = 120,
+ .upper_margin = 1,
+ .lower_margin = 17,
+ .vsync_len = 2,
+ .sync = 0,
+ },
+ }
+#endif
+#ifdef CONFIG_SH_MIGOR_QVGA
+ .clock_source = LCDC_CLK_PERIPHERAL,
+ .ch[0] = {
+ .chan = LCDC_CHAN_MAINLCD,
+ .bpp = 16,
+ .interface_type = SYS16A,
+ .clock_divider = 10,
+ .lcd_cfg = {
+ .name = "PH240320T",
+ .xres = 320,
+ .yres = 240,
+ .left_margin = 0,
+ .right_margin = 16,
+ .hsync_len = 8,
+ .upper_margin = 1,
+ .lower_margin = 17,
+ .vsync_len = 2,
+ .sync = FB_SYNC_HOR_HIGH_ACT,
+ },
+ .board_cfg = {
+ .setup_sys = migor_lcd_qvga_setup,
+ },
+ .sys_bus_cfg = {
+ .ldmt2r = 0x06000a09,
+ .ldmt3r = 0x180e3418,
+ },
+ }
+#endif
+};
+
+static struct resource migor_lcdc_resources[] = {
+ [0] = {
+ .name = "LCDC",
+ .start = 0xfe940000, /* P4-only space */
+ .end = 0xfe941fff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device migor_lcdc_device = {
+ .name = "sh_mobile_lcdc_fb",
+ .num_resources = ARRAY_SIZE(migor_lcdc_resources),
+ .resource = migor_lcdc_resources,
+ .dev = {
+ .platform_data = &sh_mobile_lcdc_info,
+ },
+};
+
static struct platform_device *migor_devices[] __initdata = {
&smc91x_eth_device,
&sh_keysc_device,
+ &migor_lcdc_device,
&migor_nor_flash_device,
&migor_nand_flash_device,
};
static int __init migor_devices_setup(void)
{
clk_always_enable("mstp214"); /* KEYSC */
+ clk_always_enable("mstp200"); /* LCDC */
i2c_register_board_info(0, migor_i2c_devices,
ARRAY_SIZE(migor_i2c_devices));
ctrl_outw(ctrl_inw(PORT_PZCR) & ~0xc, PORT_PZCR);
ctrl_outw((ctrl_inw(PORT_PSELA) | 0x8000), PORT_PSELA);
ctrl_outw((ctrl_inw(PORT_HIZCRC) & ~0x4000), PORT_HIZCRC);
+
+#ifdef CONFIG_SH_MIGOR_RTA_WVGA
+ /* LCDC - WVGA - Enable RGB Interface signals */
+ ctrl_outw(ctrl_inw(PORT_PACR) & ~0x0003, PORT_PACR);
+ ctrl_outw(0x0000, PORT_PHCR);
+ ctrl_outw(0x0000, PORT_PLCR);
+ ctrl_outw(0x0000, PORT_PMCR);
+ ctrl_outw(ctrl_inw(PORT_PRCR) & ~0x000f, PORT_PRCR);
+ ctrl_outw((ctrl_inw(PORT_PSELD) & ~0x000d) | 0x0400, PORT_PSELD);
+ ctrl_outw(ctrl_inw(PORT_MSELCRB) & ~0x0100, PORT_MSELCRB);
+ ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x01e0, PORT_HIZCRA);
+#endif
+#ifdef CONFIG_SH_MIGOR_QVGA
+ /* LCDC - QVGA - Enable SYS Interface signals */
+ ctrl_outw(ctrl_inw(PORT_PACR) & ~0x0003, PORT_PACR);
+ ctrl_outw((ctrl_inw(PORT_PHCR) & ~0xcfff) | 0x0010, PORT_PHCR);
+ ctrl_outw(0x0000, PORT_PLCR);
+ ctrl_outw(0x0000, PORT_PMCR);
+ ctrl_outw(ctrl_inw(PORT_PRCR) & ~0x030f, PORT_PRCR);
+ ctrl_outw((ctrl_inw(PORT_PSELD) & ~0x0001) | 0x0420, PORT_PSELD);
+ ctrl_outw(ctrl_inw(PORT_MSELCRB) | 0x0100, PORT_MSELCRB);
+ ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x01e0, PORT_HIZCRA);
+#endif
}
static struct sh_machine_vector mv_migor __initmv = {
projects / platform / kernel / linux-3.10.git / commitdiff