pci: pcie_dw_rockchip: Use regulator_set_enable_if_allowed

The vpcie3v3 regulator is typically a fixed regulator controlled using
gpio. Change to use enable and disable calls on the regulator instead
of trying to set a voltage value.

Also remove the delay to match linux driver, for a fixed regulator the
startup-delay-us prop can be used in case a startup delay is needed.
Limited testing on ROCK 3A, ROCK 5B, Quartz64, Odroid-M1 has shown that
this delay was not needed.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

diff --git a/drivers/pci/pcie_dw_rockchip.c b/drivers/pci/pcie_dw_rockchip.c
index 83737e6..1b8a140 100644 (file)
--- a/drivers/pci/pcie_dw_rockchip.c
+++ b/drivers/pci/pcie_dw_rockchip.c
@@ -288,21 +288,16 @@ static int rockchip_pcie_init_port(struct udevice *dev)
        struct rk_pcie *priv = dev_get_priv(dev);
 
        /* Set power and maybe external ref clk input */
-       if (priv->vpcie3v3) {
-               ret = regulator_set_value(priv->vpcie3v3, 3300000);
-               if (ret) {
-                       dev_err(priv->dw.dev, "failed to enable vpcie3v3 (ret=%d)\n",
-                               ret);
-                       return ret;
-               }
+       ret = regulator_set_enable_if_allowed(priv->vpcie3v3, true);
+       if (ret && ret != -ENOSYS) {
+               dev_err(dev, "failed to enable vpcie3v3 (ret=%d)\n", ret);
+               return ret;
        }
 
-       udelay(MACRO_US * 1000);
-
        ret = generic_phy_init(&priv->phy);
        if (ret) {
                dev_err(dev, "failed to init phy (ret=%d)\n", ret);
-               return ret;
+               goto err_disable_regulator;
        }
 
        ret = generic_phy_power_on(&priv->phy);
@@ -345,6 +340,8 @@ err_power_off_phy:
        generic_phy_power_off(&priv->phy);
 err_exit_phy:
        generic_phy_exit(&priv->phy);
+err_disable_regulator:
+       regulator_set_enable_if_allowed(priv->vpcie3v3, false);
 
        return ret;
 }