wil6210: align to latest auto generated wmi.h
authorLior David <qca_liord@qca.qualcomm.com>
Mon, 28 Nov 2016 11:49:03 +0000 (13:49 +0200)
committerKalle Valo <kvalo@qca.qualcomm.com>
Thu, 1 Dec 2016 11:20:41 +0000 (13:20 +0200)
Align to latest version of the auto generated wmi file
describing the interface with FW.

Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
drivers/net/wireless/ath/wil6210/wmi.h

index 2cc7775..d93a4d4 100644 (file)
@@ -35,6 +35,7 @@
 #define WMI_MAC_LEN                    (6)
 #define WMI_PROX_RANGE_NUM             (3)
 #define WMI_MAX_LOSS_DMG_BEACONS       (20)
+#define MAX_NUM_OF_SECTORS             (128)
 
 /* Mailbox interface
  * used for commands and events
@@ -68,144 +69,149 @@ struct wmi_cmd_hdr {
 
 /* List of Commands */
 enum wmi_command_id {
-       WMI_CONNECT_CMDID                       = 0x01,
-       WMI_DISCONNECT_CMDID                    = 0x03,
-       WMI_DISCONNECT_STA_CMDID                = 0x04,
-       WMI_START_SCAN_CMDID                    = 0x07,
-       WMI_SET_BSS_FILTER_CMDID                = 0x09,
-       WMI_SET_PROBED_SSID_CMDID               = 0x0A,
-       WMI_SET_LISTEN_INT_CMDID                = 0x0B,
-       WMI_BCON_CTRL_CMDID                     = 0x0F,
-       WMI_ADD_CIPHER_KEY_CMDID                = 0x16,
-       WMI_DELETE_CIPHER_KEY_CMDID             = 0x17,
-       WMI_PCP_CONF_CMDID                      = 0x18,
-       WMI_SET_APPIE_CMDID                     = 0x3F,
-       WMI_SET_WSC_STATUS_CMDID                = 0x41,
-       WMI_PXMT_RANGE_CFG_CMDID                = 0x42,
-       WMI_PXMT_SNR2_RANGE_CFG_CMDID           = 0x43,
-       WMI_MEM_READ_CMDID                      = 0x800,
-       WMI_MEM_WR_CMDID                        = 0x801,
-       WMI_ECHO_CMDID                          = 0x803,
-       WMI_DEEP_ECHO_CMDID                     = 0x804,
-       WMI_CONFIG_MAC_CMDID                    = 0x805,
-       WMI_CONFIG_PHY_DEBUG_CMDID              = 0x806,
-       WMI_ADD_DEBUG_TX_PCKT_CMDID             = 0x808,
-       WMI_PHY_GET_STATISTICS_CMDID            = 0x809,
-       WMI_FS_TUNE_CMDID                       = 0x80A,
-       WMI_CORR_MEASURE_CMDID                  = 0x80B,
-       WMI_READ_RSSI_CMDID                     = 0x80C,
-       WMI_TEMP_SENSE_CMDID                    = 0x80E,
-       WMI_DC_CALIB_CMDID                      = 0x80F,
-       WMI_SEND_TONE_CMDID                     = 0x810,
-       WMI_IQ_TX_CALIB_CMDID                   = 0x811,
-       WMI_IQ_RX_CALIB_CMDID                   = 0x812,
-       WMI_SET_UCODE_IDLE_CMDID                = 0x813,
-       WMI_SET_WORK_MODE_CMDID                 = 0x815,
-       WMI_LO_LEAKAGE_CALIB_CMDID              = 0x816,
-       WMI_MARLON_R_READ_CMDID                 = 0x818,
-       WMI_MARLON_R_WRITE_CMDID                = 0x819,
-       WMI_MARLON_R_TXRX_SEL_CMDID             = 0x81A,
-       MAC_IO_STATIC_PARAMS_CMDID              = 0x81B,
-       MAC_IO_DYNAMIC_PARAMS_CMDID             = 0x81C,
-       WMI_SILENT_RSSI_CALIB_CMDID             = 0x81D,
-       WMI_RF_RX_TEST_CMDID                    = 0x81E,
-       WMI_CFG_RX_CHAIN_CMDID                  = 0x820,
-       WMI_VRING_CFG_CMDID                     = 0x821,
-       WMI_BCAST_VRING_CFG_CMDID               = 0x822,
-       WMI_VRING_BA_EN_CMDID                   = 0x823,
-       WMI_VRING_BA_DIS_CMDID                  = 0x824,
-       WMI_RCP_ADDBA_RESP_CMDID                = 0x825,
-       WMI_RCP_DELBA_CMDID                     = 0x826,
-       WMI_SET_SSID_CMDID                      = 0x827,
-       WMI_GET_SSID_CMDID                      = 0x828,
-       WMI_SET_PCP_CHANNEL_CMDID               = 0x829,
-       WMI_GET_PCP_CHANNEL_CMDID               = 0x82A,
-       WMI_SW_TX_REQ_CMDID                     = 0x82B,
-       WMI_READ_MAC_RXQ_CMDID                  = 0x830,
-       WMI_READ_MAC_TXQ_CMDID                  = 0x831,
-       WMI_WRITE_MAC_RXQ_CMDID                 = 0x832,
-       WMI_WRITE_MAC_TXQ_CMDID                 = 0x833,
-       WMI_WRITE_MAC_XQ_FIELD_CMDID            = 0x834,
-       WMI_MLME_PUSH_CMDID                     = 0x835,
-       WMI_BEAMFORMING_MGMT_CMDID              = 0x836,
-       WMI_BF_TXSS_MGMT_CMDID                  = 0x837,
-       WMI_BF_SM_MGMT_CMDID                    = 0x838,
-       WMI_BF_RXSS_MGMT_CMDID                  = 0x839,
-       WMI_BF_TRIG_CMDID                       = 0x83A,
-       WMI_LINK_MAINTAIN_CFG_WRITE_CMDID       = 0x842,
-       WMI_LINK_MAINTAIN_CFG_READ_CMDID        = 0x843,
-       WMI_SET_SECTORS_CMDID                   = 0x849,
-       WMI_MAINTAIN_PAUSE_CMDID                = 0x850,
-       WMI_MAINTAIN_RESUME_CMDID               = 0x851,
-       WMI_RS_MGMT_CMDID                       = 0x852,
-       WMI_RF_MGMT_CMDID                       = 0x853,
-       WMI_THERMAL_THROTTLING_CTRL_CMDID       = 0x854,
-       WMI_THERMAL_THROTTLING_GET_STATUS_CMDID = 0x855,
-       WMI_OTP_READ_CMDID                      = 0x856,
-       WMI_OTP_WRITE_CMDID                     = 0x857,
-       WMI_LED_CFG_CMDID                       = 0x858,
+       WMI_CONNECT_CMDID                               = 0x01,
+       WMI_DISCONNECT_CMDID                            = 0x03,
+       WMI_DISCONNECT_STA_CMDID                        = 0x04,
+       WMI_START_SCAN_CMDID                            = 0x07,
+       WMI_SET_BSS_FILTER_CMDID                        = 0x09,
+       WMI_SET_PROBED_SSID_CMDID                       = 0x0A,
+       WMI_SET_LISTEN_INT_CMDID                        = 0x0B,
+       WMI_BCON_CTRL_CMDID                             = 0x0F,
+       WMI_ADD_CIPHER_KEY_CMDID                        = 0x16,
+       WMI_DELETE_CIPHER_KEY_CMDID                     = 0x17,
+       WMI_PCP_CONF_CMDID                              = 0x18,
+       WMI_SET_APPIE_CMDID                             = 0x3F,
+       WMI_SET_WSC_STATUS_CMDID                        = 0x41,
+       WMI_PXMT_RANGE_CFG_CMDID                        = 0x42,
+       WMI_PXMT_SNR2_RANGE_CFG_CMDID                   = 0x43,
+       WMI_MEM_READ_CMDID                              = 0x800,
+       WMI_MEM_WR_CMDID                                = 0x801,
+       WMI_ECHO_CMDID                                  = 0x803,
+       WMI_DEEP_ECHO_CMDID                             = 0x804,
+       WMI_CONFIG_MAC_CMDID                            = 0x805,
+       WMI_CONFIG_PHY_DEBUG_CMDID                      = 0x806,
+       WMI_ADD_DEBUG_TX_PCKT_CMDID                     = 0x808,
+       WMI_PHY_GET_STATISTICS_CMDID                    = 0x809,
+       WMI_FS_TUNE_CMDID                               = 0x80A,
+       WMI_CORR_MEASURE_CMDID                          = 0x80B,
+       WMI_READ_RSSI_CMDID                             = 0x80C,
+       WMI_TEMP_SENSE_CMDID                            = 0x80E,
+       WMI_DC_CALIB_CMDID                              = 0x80F,
+       WMI_SEND_TONE_CMDID                             = 0x810,
+       WMI_IQ_TX_CALIB_CMDID                           = 0x811,
+       WMI_IQ_RX_CALIB_CMDID                           = 0x812,
+       WMI_SET_UCODE_IDLE_CMDID                        = 0x813,
+       WMI_SET_WORK_MODE_CMDID                         = 0x815,
+       WMI_LO_LEAKAGE_CALIB_CMDID                      = 0x816,
+       WMI_MARLON_R_READ_CMDID                         = 0x818,
+       WMI_MARLON_R_WRITE_CMDID                        = 0x819,
+       WMI_MARLON_R_TXRX_SEL_CMDID                     = 0x81A,
+       MAC_IO_STATIC_PARAMS_CMDID                      = 0x81B,
+       MAC_IO_DYNAMIC_PARAMS_CMDID                     = 0x81C,
+       WMI_SILENT_RSSI_CALIB_CMDID                     = 0x81D,
+       WMI_RF_RX_TEST_CMDID                            = 0x81E,
+       WMI_CFG_RX_CHAIN_CMDID                          = 0x820,
+       WMI_VRING_CFG_CMDID                             = 0x821,
+       WMI_BCAST_VRING_CFG_CMDID                       = 0x822,
+       WMI_VRING_BA_EN_CMDID                           = 0x823,
+       WMI_VRING_BA_DIS_CMDID                          = 0x824,
+       WMI_RCP_ADDBA_RESP_CMDID                        = 0x825,
+       WMI_RCP_DELBA_CMDID                             = 0x826,
+       WMI_SET_SSID_CMDID                              = 0x827,
+       WMI_GET_SSID_CMDID                              = 0x828,
+       WMI_SET_PCP_CHANNEL_CMDID                       = 0x829,
+       WMI_GET_PCP_CHANNEL_CMDID                       = 0x82A,
+       WMI_SW_TX_REQ_CMDID                             = 0x82B,
+       WMI_READ_MAC_RXQ_CMDID                          = 0x830,
+       WMI_READ_MAC_TXQ_CMDID                          = 0x831,
+       WMI_WRITE_MAC_RXQ_CMDID                         = 0x832,
+       WMI_WRITE_MAC_TXQ_CMDID                         = 0x833,
+       WMI_WRITE_MAC_XQ_FIELD_CMDID                    = 0x834,
+       WMI_MLME_PUSH_CMDID                             = 0x835,
+       WMI_BEAMFORMING_MGMT_CMDID                      = 0x836,
+       WMI_BF_TXSS_MGMT_CMDID                          = 0x837,
+       WMI_BF_SM_MGMT_CMDID                            = 0x838,
+       WMI_BF_RXSS_MGMT_CMDID                          = 0x839,
+       WMI_BF_TRIG_CMDID                               = 0x83A,
+       WMI_LINK_MAINTAIN_CFG_WRITE_CMDID               = 0x842,
+       WMI_LINK_MAINTAIN_CFG_READ_CMDID                = 0x843,
+       WMI_SET_SECTORS_CMDID                           = 0x849,
+       WMI_MAINTAIN_PAUSE_CMDID                        = 0x850,
+       WMI_MAINTAIN_RESUME_CMDID                       = 0x851,
+       WMI_RS_MGMT_CMDID                               = 0x852,
+       WMI_RF_MGMT_CMDID                               = 0x853,
+       WMI_THERMAL_THROTTLING_CTRL_CMDID               = 0x854,
+       WMI_THERMAL_THROTTLING_GET_STATUS_CMDID         = 0x855,
+       WMI_OTP_READ_CMDID                              = 0x856,
+       WMI_OTP_WRITE_CMDID                             = 0x857,
+       WMI_LED_CFG_CMDID                               = 0x858,
        /* Performance monitoring commands */
-       WMI_BF_CTRL_CMDID                       = 0x862,
-       WMI_NOTIFY_REQ_CMDID                    = 0x863,
-       WMI_GET_STATUS_CMDID                    = 0x864,
-       WMI_GET_RF_STATUS_CMDID                 = 0x866,
-       WMI_GET_BASEBAND_TYPE_CMDID             = 0x867,
-       WMI_UNIT_TEST_CMDID                     = 0x900,
-       WMI_HICCUP_CMDID                        = 0x901,
-       WMI_FLASH_READ_CMDID                    = 0x902,
-       WMI_FLASH_WRITE_CMDID                   = 0x903,
+       WMI_BF_CTRL_CMDID                               = 0x862,
+       WMI_NOTIFY_REQ_CMDID                            = 0x863,
+       WMI_GET_STATUS_CMDID                            = 0x864,
+       WMI_GET_RF_STATUS_CMDID                         = 0x866,
+       WMI_GET_BASEBAND_TYPE_CMDID                     = 0x867,
+       WMI_UNIT_TEST_CMDID                             = 0x900,
+       WMI_HICCUP_CMDID                                = 0x901,
+       WMI_FLASH_READ_CMDID                            = 0x902,
+       WMI_FLASH_WRITE_CMDID                           = 0x903,
        /* Power management */
-       WMI_TRAFFIC_DEFERRAL_CMDID              = 0x904,
-       WMI_TRAFFIC_RESUME_CMDID                = 0x905,
+       WMI_TRAFFIC_DEFERRAL_CMDID                      = 0x904,
+       WMI_TRAFFIC_RESUME_CMDID                        = 0x905,
        /* P2P */
-       WMI_P2P_CFG_CMDID                       = 0x910,
-       WMI_PORT_ALLOCATE_CMDID                 = 0x911,
-       WMI_PORT_DELETE_CMDID                   = 0x912,
-       WMI_POWER_MGMT_CFG_CMDID                = 0x913,
-       WMI_START_LISTEN_CMDID                  = 0x914,
-       WMI_START_SEARCH_CMDID                  = 0x915,
-       WMI_DISCOVERY_START_CMDID               = 0x916,
-       WMI_DISCOVERY_STOP_CMDID                = 0x917,
-       WMI_PCP_START_CMDID                     = 0x918,
-       WMI_PCP_STOP_CMDID                      = 0x919,
-       WMI_GET_PCP_FACTOR_CMDID                = 0x91B,
+       WMI_P2P_CFG_CMDID                               = 0x910,
+       WMI_PORT_ALLOCATE_CMDID                         = 0x911,
+       WMI_PORT_DELETE_CMDID                           = 0x912,
+       WMI_POWER_MGMT_CFG_CMDID                        = 0x913,
+       WMI_START_LISTEN_CMDID                          = 0x914,
+       WMI_START_SEARCH_CMDID                          = 0x915,
+       WMI_DISCOVERY_START_CMDID                       = 0x916,
+       WMI_DISCOVERY_STOP_CMDID                        = 0x917,
+       WMI_PCP_START_CMDID                             = 0x918,
+       WMI_PCP_STOP_CMDID                              = 0x919,
+       WMI_GET_PCP_FACTOR_CMDID                        = 0x91B,
        /* Power Save Configuration Commands */
-       WMI_PS_DEV_PROFILE_CFG_CMDID            = 0x91C,
+       WMI_PS_DEV_PROFILE_CFG_CMDID                    = 0x91C,
        /* Not supported yet */
-       WMI_PS_DEV_CFG_CMDID                    = 0x91D,
+       WMI_PS_DEV_CFG_CMDID                            = 0x91D,
        /* Not supported yet */
-       WMI_PS_DEV_CFG_READ_CMDID               = 0x91E,
+       WMI_PS_DEV_CFG_READ_CMDID                       = 0x91E,
        /* Per MAC Power Save Configuration commands
         * Not supported yet
         */
-       WMI_PS_MID_CFG_CMDID                    = 0x91F,
+       WMI_PS_MID_CFG_CMDID                            = 0x91F,
        /* Not supported yet */
-       WMI_PS_MID_CFG_READ_CMDID               = 0x920,
-       WMI_RS_CFG_CMDID                        = 0x921,
-       WMI_GET_DETAILED_RS_RES_CMDID           = 0x922,
-       WMI_AOA_MEAS_CMDID                      = 0x923,
-       WMI_SET_MGMT_RETRY_LIMIT_CMDID          = 0x930,
-       WMI_GET_MGMT_RETRY_LIMIT_CMDID          = 0x931,
-       WMI_TOF_SESSION_START_CMDID             = 0x991,
-       WMI_TOF_GET_CAPABILITIES_CMDID          = 0x992,
-       WMI_TOF_SET_LCR_CMDID                   = 0x993,
-       WMI_TOF_SET_LCI_CMDID                   = 0x994,
-       WMI_TOF_CHANNEL_INFO_CMDID              = 0x995,
-       WMI_GET_RF_SECTOR_PARAMS_CMDID          = 0x9A0,
-       WMI_SET_RF_SECTOR_PARAMS_CMDID          = 0x9A1,
-       WMI_GET_SELECTED_RF_SECTOR_INDEX_CMDID  = 0x9A2,
-       WMI_SET_SELECTED_RF_SECTOR_INDEX_CMDID  = 0x9A3,
-       WMI_SET_RF_SECTOR_ON_CMDID              = 0x9A4,
-       WMI_SET_MAC_ADDRESS_CMDID               = 0xF003,
-       WMI_ABORT_SCAN_CMDID                    = 0xF007,
-       WMI_SET_PROMISCUOUS_MODE_CMDID          = 0xF041,
-       WMI_GET_PMK_CMDID                       = 0xF048,
-       WMI_SET_PASSPHRASE_CMDID                = 0xF049,
-       WMI_SEND_ASSOC_RES_CMDID                = 0xF04A,
-       WMI_SET_ASSOC_REQ_RELAY_CMDID           = 0xF04B,
-       WMI_MAC_ADDR_REQ_CMDID                  = 0xF04D,
-       WMI_FW_VER_CMDID                        = 0xF04E,
-       WMI_PMC_CMDID                           = 0xF04F,
+       WMI_PS_MID_CFG_READ_CMDID                       = 0x920,
+       WMI_RS_CFG_CMDID                                = 0x921,
+       WMI_GET_DETAILED_RS_RES_CMDID                   = 0x922,
+       WMI_AOA_MEAS_CMDID                              = 0x923,
+       WMI_SET_MGMT_RETRY_LIMIT_CMDID                  = 0x930,
+       WMI_GET_MGMT_RETRY_LIMIT_CMDID                  = 0x931,
+       WMI_TOF_SESSION_START_CMDID                     = 0x991,
+       WMI_TOF_GET_CAPABILITIES_CMDID                  = 0x992,
+       WMI_TOF_SET_LCR_CMDID                           = 0x993,
+       WMI_TOF_SET_LCI_CMDID                           = 0x994,
+       WMI_TOF_CHANNEL_INFO_CMDID                      = 0x995,
+       WMI_TOF_SET_TX_RX_OFFSET_CMDID                  = 0x997,
+       WMI_TOF_GET_TX_RX_OFFSET_CMDID                  = 0x998,
+       WMI_GET_RF_SECTOR_PARAMS_CMDID                  = 0x9A0,
+       WMI_SET_RF_SECTOR_PARAMS_CMDID                  = 0x9A1,
+       WMI_GET_SELECTED_RF_SECTOR_INDEX_CMDID          = 0x9A2,
+       WMI_SET_SELECTED_RF_SECTOR_INDEX_CMDID          = 0x9A3,
+       WMI_SET_RF_SECTOR_ON_CMDID                      = 0x9A4,
+       WMI_PRIO_TX_SECTORS_ORDER_CMDID                 = 0x9A5,
+       WMI_PRIO_TX_SECTORS_NUMBER_CMDID                = 0x9A6,
+       WMI_PRIO_TX_SECTORS_SET_DEFAULT_CFG_CMDID       = 0x9A7,
+       WMI_SET_MAC_ADDRESS_CMDID                       = 0xF003,
+       WMI_ABORT_SCAN_CMDID                            = 0xF007,
+       WMI_SET_PROMISCUOUS_MODE_CMDID                  = 0xF041,
+       WMI_GET_PMK_CMDID                               = 0xF048,
+       WMI_SET_PASSPHRASE_CMDID                        = 0xF049,
+       WMI_SEND_ASSOC_RES_CMDID                        = 0xF04A,
+       WMI_SET_ASSOC_REQ_RELAY_CMDID                   = 0xF04B,
+       WMI_MAC_ADDR_REQ_CMDID                          = 0xF04D,
+       WMI_FW_VER_CMDID                                = 0xF04E,
+       WMI_PMC_CMDID                                   = 0xF04F,
 };
 
 /* WMI_CONNECT_CMDID */
@@ -959,6 +965,15 @@ struct wmi_tof_channel_info_cmd {
        __le32 channel_info_report_request;
 } __packed;
 
+/* WMI_TOF_SET_TX_RX_OFFSET_CMDID */
+struct wmi_tof_set_tx_rx_offset_cmd {
+       /* TX delay offset */
+       __le32 tx_offset;
+       /* RX delay offset */
+       __le32 rx_offset;
+       __le32 reserved[2];
+} __packed;
+
 /* WMI Events
  * List of Events (target to host)
  */
@@ -1060,11 +1075,16 @@ enum wmi_event_id {
        WMI_TOF_SET_LCI_EVENTID                         = 0x1994,
        WMI_TOF_FTM_PER_DEST_RES_EVENTID                = 0x1995,
        WMI_TOF_CHANNEL_INFO_EVENTID                    = 0x1996,
+       WMI_TOF_SET_TX_RX_OFFSET_EVENTID                = 0x1997,
+       WMI_TOF_GET_TX_RX_OFFSET_EVENTID                = 0x1998,
        WMI_GET_RF_SECTOR_PARAMS_DONE_EVENTID           = 0x19A0,
        WMI_SET_RF_SECTOR_PARAMS_DONE_EVENTID           = 0x19A1,
        WMI_GET_SELECTED_RF_SECTOR_INDEX_DONE_EVENTID   = 0x19A2,
        WMI_SET_SELECTED_RF_SECTOR_INDEX_DONE_EVENTID   = 0x19A3,
        WMI_SET_RF_SECTOR_ON_DONE_EVENTID               = 0x19A4,
+       WMI_PRIO_TX_SECTORS_ORDER_EVENTID               = 0x19A5,
+       WMI_PRIO_TX_SECTORS_NUMBER_EVENTID              = 0x19A6,
+       WMI_PRIO_TX_SECTORS_SET_DEFAULT_CFG_EVENTID     = 0x19A7,
        WMI_SET_CHANNEL_EVENTID                         = 0x9000,
        WMI_ASSOC_REQ_EVENTID                           = 0x9001,
        WMI_EAPOL_RX_EVENTID                            = 0x9002,
@@ -1190,6 +1210,7 @@ enum baseband_type {
        BASEBAND_SPARROW_M_B0   = 0x05,
        BASEBAND_SPARROW_M_C0   = 0x06,
        BASEBAND_SPARROW_M_D0   = 0x07,
+       BASEBAND_TALYN_M_A0     = 0x08,
 };
 
 /* WMI_GET_BASEBAND_TYPE_EVENTID */
@@ -2224,6 +2245,25 @@ struct wmi_tof_channel_info_event {
        u8 report[0];
 } __packed;
 
+/* WMI_TOF_SET_TX_RX_OFFSET_EVENTID */
+struct wmi_tof_set_tx_rx_offset_event {
+       /* enum wmi_fw_status */
+       u8 status;
+       u8 reserved[3];
+} __packed;
+
+/* WMI_TOF_GET_TX_RX_OFFSET_EVENTID */
+struct wmi_tof_get_tx_rx_offset_event {
+       /* enum wmi_fw_status */
+       u8 status;
+       u8 reserved1[3];
+       /* TX delay offset */
+       __le32 tx_offset;
+       /* RX delay offset */
+       __le32 rx_offset;
+       __le32 reserved2[2];
+} __packed;
+
 /* Result status codes for WMI commands */
 enum wmi_rf_sector_status {
        WMI_RF_SECTOR_STATUS_SUCCESS                    = 0x00,
@@ -2388,4 +2428,100 @@ struct wmi_set_rf_sector_on_done_event {
        u8 reserved[3];
 } __packed;
 
+enum wmi_sector_sweep_type {
+       WMI_SECTOR_SWEEP_TYPE_TXSS              = 0x00,
+       WMI_SECTOR_SWEEP_TYPE_BCON              = 0x01,
+       WMI_SECTOR_SWEEP_TYPE_TXSS_AND_BCON     = 0x02,
+       WMI_SECTOR_SWEEP_TYPE_NUM               = 0x03,
+};
+
+/* WMI_PRIO_TX_SECTORS_ORDER_CMDID
+ *
+ * Set the order of TX sectors in TXSS and/or Beacon(AP).
+ *
+ * Returned event:
+ * - WMI_PRIO_TX_SECTORS_ORDER_EVENTID
+ */
+struct wmi_prio_tx_sectors_order_cmd {
+       /* tx sectors order to be applied, 0xFF for end of array */
+       u8 tx_sectors_priority_array[MAX_NUM_OF_SECTORS];
+       /* enum wmi_sector_sweep_type, TXSS and/or Beacon */
+       u8 sector_sweep_type;
+       /* needed only for TXSS configuration */
+       u8 cid;
+       /* alignment to 32b */
+       u8 reserved[2];
+} __packed;
+
+/* completion status codes */
+enum wmi_prio_tx_sectors_cmd_status {
+       WMI_PRIO_TX_SECT_CMD_STATUS_SUCCESS     = 0x00,
+       WMI_PRIO_TX_SECT_CMD_STATUS_BAD_PARAM   = 0x01,
+       /* other error */
+       WMI_PRIO_TX_SECT_CMD_STATUS_ERROR       = 0x02,
+};
+
+/* WMI_PRIO_TX_SECTORS_ORDER_EVENTID */
+struct wmi_prio_tx_sectors_order_event {
+       /* enum wmi_prio_tx_sectors_cmd_status */
+       u8 status;
+       /* alignment to 32b */
+       u8 reserved[3];
+} __packed;
+
+struct wmi_prio_tx_sectors_num_cmd {
+       /* [0-128], 0 = No changes */
+       u8 beacon_number_of_sectors;
+       /* [0-128], 0 = No changes */
+       u8 txss_number_of_sectors;
+       /* [0-8] needed only for TXSS configuration */
+       u8 cid;
+} __packed;
+
+/* WMI_PRIO_TX_SECTORS_NUMBER_CMDID
+ *
+ * Set the number of active sectors in TXSS and/or Beacon.
+ *
+ * Returned event:
+ * - WMI_PRIO_TX_SECTORS_NUMBER_EVENTID
+ */
+struct wmi_prio_tx_sectors_number_cmd {
+       struct wmi_prio_tx_sectors_num_cmd active_sectors_num;
+       /* alignment to 32b */
+       u8 reserved;
+} __packed;
+
+/* WMI_PRIO_TX_SECTORS_NUMBER_EVENTID */
+struct wmi_prio_tx_sectors_number_event {
+       /* enum wmi_prio_tx_sectors_cmd_status */
+       u8 status;
+       /* alignment to 32b */
+       u8 reserved[3];
+} __packed;
+
+/* WMI_PRIO_TX_SECTORS_SET_DEFAULT_CFG_CMDID
+ *
+ * Set default sectors order and number (hard coded in board file)
+ * in TXSS and/or Beacon.
+ *
+ * Returned event:
+ * - WMI_PRIO_TX_SECTORS_SET_DEFAULT_CFG_EVENTID
+ */
+struct wmi_prio_tx_sectors_set_default_cfg_cmd {
+       /* enum wmi_sector_sweep_type, TXSS and/or Beacon */
+       u8 sector_sweep_type;
+       /* needed only for TXSS configuration */
+       u8 cid;
+       /* alignment to 32b */
+       u8 reserved[2];
+} __packed;
+
+/* WMI_PRIO_TX_SECTORS_SET_DEFAULT_CFG_EVENTID */
+struct wmi_prio_tx_sectors_set_default_cfg_event {
+       /* enum wmi_prio_tx_sectors_cmd_status */
+       u8 status;
+       /* alignment to 32b */
+       u8 reserved[3];
+} __packed;
+
 #endif /* __WILOCITY_WMI_H__ */