sunxi: Drop LCD_MODE from A13-OLinuxIno defconfigs

With the unified / cleaned up default display output selection changes,
which were done as part of adding composite video out support, our
example LCD_MODE line in the A13-OLinuxIno defconfigs causes the display
code to setup a LCD console by default, rather then a VGA console.

Given that the LCD console is only useful for people who have hooked up
the exact lcd-panel from the config, while most people will not have any
lcd panel connected to these boards, this is not a good default.

Dropping the LCD_MODE line which was intended as an example fixes this,
instead add a link to the LCD_MODE help text pointing to
http://linux-sunxi.org/LCD which contains the removed and other example
modes.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>

diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
index fd6668f..55906b5 100644 (file)
--- a/board/sunxi/Kconfig
+++ b/board/sunxi/Kconfig
@@ -425,6 +425,7 @@ config VIDEO_LCD_MODE
        LCD panel timing details string, leave empty if there is no LCD panel.
        This is in drivers/video/videomodes.c: video_get_params() format, e.g.
        x:800,y:480,depth:18,pclk_khz:33000,le:16,ri:209,up:22,lo:22,hs:30,vs:1,sync:0,vmode:0
+       Also see: http://linux-sunxi.org/LCD
 
 config VIDEO_LCD_DCLK_PHASE
        int "LCD panel display clock phase"

diff --git a/configs/A13-OLinuXinoM_defconfig b/configs/A13-OLinuXinoM_defconfig
index dcaaff9..5852be6 100644 (file)
--- a/configs/A13-OLinuXinoM_defconfig
+++ b/configs/A13-OLinuXinoM_defconfig
@@ -7,7 +7,6 @@ CONFIG_USB1_VBUS_PIN="PG11"
 # CONFIG_VIDEO_HDMI is not set
 CONFIG_VIDEO_VGA_VIA_LCD=y
 CONFIG_VIDEO_VGA_VIA_LCD_FORCE_SYNC_ACTIVE_HIGH=y
-CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:16,ri:209,up:22,lo:22,hs:30,vs:1,sync:3,vmode:0"
 CONFIG_VIDEO_LCD_POWER="PB10"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-olinuxino-micro"

diff --git a/configs/A13-OLinuXino_defconfig b/configs/A13-OLinuXino_defconfig
index 4b43372..f1961f3 100644 (file)
--- a/configs/A13-OLinuXino_defconfig
+++ b/configs/A13-OLinuXino_defconfig
@@ -8,7 +8,6 @@ CONFIG_AXP_GPIO=y
 # CONFIG_VIDEO_HDMI is not set
 CONFIG_VIDEO_VGA_VIA_LCD=y
 CONFIG_VIDEO_VGA_VIA_LCD_FORCE_SYNC_ACTIVE_HIGH=y
-CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:16,ri:209,up:22,lo:22,hs:30,vs:1,sync:3,vmode:0"
 CONFIG_VIDEO_LCD_POWER="AXP0-0"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-olinuxino"