ASoC: Add WM8903 interrupt support

Currently used to detect completion of the write sequencer.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>

diff --git a/include/sound/wm8903.h b/include/sound/wm8903.h
index 22b66a7..49bb1a8 100644 (file)
--- a/include/sound/wm8903.h
+++ b/include/sound/wm8903.h
@@ -232,6 +232,8 @@
 #define WM8903_GP5_DB_WIDTH                          1  /* GP5_DB */
 
 struct wm8903_platform_data {
+       bool irq_active_low;   /* Set if IRQ active low, default high */
+
         /* Default register value for R6 (Mic bias), used to configure
         * microphone detection.  In conjunction with gpio_cfg this
         * can be used to route the microphone status signals out onto

diff --git a/sound/soc/codecs/wm8903.c b/sound/soc/codecs/wm8903.c
index 467e6c3..7aa2adb 100644 (file)
--- a/sound/soc/codecs/wm8903.c
+++ b/sound/soc/codecs/wm8903.c
@@ -12,12 +12,12 @@
  * TODO:
  *  - TDM mode configuration.
  *  - Digital microphone support.
- *  - Interrupt support (mic detect and sequencer).
  */
 
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/init.h>
+#include <linux/completion.h>
 #include <linux/delay.h>
 #include <linux/pm.h>
 #include <linux/i2c.h>
@@ -29,6 +29,7 @@
 #include <sound/soc.h>
 #include <sound/soc-dapm.h>
 #include <sound/initval.h>
+#include <sound/wm8903.h>
 
 #include "wm8903.h"
 
@@ -220,6 +221,8 @@ struct wm8903_priv {
        int playback_active;
        int capture_active;
 
+       struct completion wseq;
+
        struct snd_pcm_substream *master_substream;
        struct snd_pcm_substream *slave_substream;
 };
@@ -242,6 +245,7 @@ static int wm8903_run_sequence(struct snd_soc_codec *codec, unsigned int start)
 {
        u16 reg[5];
        struct i2c_client *i2c = codec->control_data;
+       struct wm8903_priv *wm8903 = codec->private_data;
 
        BUG_ON(start > 48);
 
@@ -256,11 +260,11 @@ static int wm8903_run_sequence(struct snd_soc_codec *codec, unsigned int start)
                     start | WM8903_WSEQ_START);
 
        /* Wait for it to complete.  If we have the interrupt wired up then
-        * we could block waiting for an interrupt, though polling may still
-        * be desirable for diagnostic purposes.
+        * that will break us out of the poll early.
         */
        do {
-               msleep(10);
+               wait_for_completion_timeout(&wm8903->wseq,
+                                           msecs_to_jiffies(10));
 
                reg[4] = snd_soc_read(codec, WM8903_WRITE_SEQUENCER_4);
        } while (reg[4] & WM8903_WSEQ_BUSY);
@@ -1433,6 +1437,22 @@ static int wm8903_hw_params(struct snd_pcm_substream *substream,
        return 0;
 }
 
+static irqreturn_t wm8903_irq(int irq, void *data)
+{
+       struct wm8903_priv *wm8903 = data;
+       struct snd_soc_codec *codec = &wm8903->codec;
+       int reg;
+
+       reg = snd_soc_read(codec, WM8903_INTERRUPT_STATUS_1);
+
+       if (reg & WM8903_WSEQ_BUSY_EINT) {
+               dev_dbg(codec->dev, "Write sequencer done\n");
+               complete(&wm8903->wseq);
+       }
+
+       return IRQ_HANDLED;
+}
+
 #define WM8903_PLAYBACK_RATES (SNDRV_PCM_RATE_8000 |\
                               SNDRV_PCM_RATE_11025 |   \
                               SNDRV_PCM_RATE_16000 |   \
@@ -1527,9 +1547,11 @@ static struct snd_soc_codec *wm8903_codec;
 static __devinit int wm8903_i2c_probe(struct i2c_client *i2c,
                                      const struct i2c_device_id *id)
 {
+       struct wm8903_platform_data *pdata = dev_get_platdata(&i2c->dev);
        struct wm8903_priv *wm8903;
        struct snd_soc_codec *codec;
        int ret, i;
+       int trigger, irq_pol;
        u16 val;
 
        wm8903 = kzalloc(sizeof(struct wm8903_priv), GFP_KERNEL);
@@ -1553,6 +1575,7 @@ static __devinit int wm8903_i2c_probe(struct i2c_client *i2c,
        codec->reg_cache = &wm8903->reg_cache[0];
        codec->private_data = wm8903;
        codec->volatile_register = wm8903_volatile_register;
+       init_completion(&wm8903->wseq);
 
        i2c_set_clientdata(i2c, codec);
        codec->control_data = i2c;
@@ -1596,6 +1619,32 @@ static __devinit int wm8903_i2c_probe(struct i2c_client *i2c,
 
                wm8903->mic_delay = pdata->micdet_delay;
        }
+       
+       if (i2c->irq) {
+               if (pdata && pdata->irq_active_low) {
+                       trigger = IRQF_TRIGGER_LOW;
+                       irq_pol = WM8903_IRQ_POL;
+               } else {
+                       trigger = IRQF_TRIGGER_HIGH;
+                       irq_pol = 0;
+               }
+
+               snd_soc_update_bits(codec, WM8903_INTERRUPT_CONTROL,
+                                   WM8903_IRQ_POL, irq_pol);
+               
+               ret = request_threaded_irq(i2c->irq, NULL, wm8903_irq,
+                                          trigger | IRQF_ONESHOT,
+                                          "wm8903", wm8903);
+               if (ret != 0) {
+                       dev_err(&i2c->dev, "Failed to request IRQ: %d\n",
+                               ret);
+                       goto err;
+               }
+
+               /* Enable write sequencer interrupts */
+               snd_soc_update_bits(codec, WM8903_INTERRUPT_STATUS_1_MASK,
+                                   WM8903_IM_WSEQ_BUSY_EINT, 0);
+       }
 
        /* power on device */
        wm8903_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
@@ -1637,7 +1686,7 @@ static __devinit int wm8903_i2c_probe(struct i2c_client *i2c,
        ret = snd_soc_register_codec(codec);
        if (ret != 0) {
                dev_err(&i2c->dev, "Failed to register codec: %d\n", ret);
-               goto err;
+               goto err_irq;
        }
 
        ret = snd_soc_register_dai(&wm8903_dai);
@@ -1650,6 +1699,9 @@ static __devinit int wm8903_i2c_probe(struct i2c_client *i2c,
 
 err_codec:
        snd_soc_unregister_codec(codec);
+err_irq:
+       if (i2c->irq)
+               free_irq(i2c->irq, wm8903);
 err:
        wm8903_codec = NULL;
        kfree(wm8903);
@@ -1659,12 +1711,16 @@ err:
 static __devexit int wm8903_i2c_remove(struct i2c_client *client)
 {
        struct snd_soc_codec *codec = i2c_get_clientdata(client);
+       struct wm8903_priv *priv = codec->private_data;
 
        snd_soc_unregister_dai(&wm8903_dai);
        snd_soc_unregister_codec(codec);
 
        wm8903_set_bias_level(codec, SND_SOC_BIAS_OFF);
 
+       if (client->irq)
+               free_irq(client->irq, priv);
+
        kfree(codec->private_data);
 
        wm8903_codec = NULL;