A test with the command below does not detect all errors
in combination with 'additionalProperties: false' and
allOf:
- $ref: "synopsys-dw-mshc-common.yaml#"
allOf:
- $ref: "mmc-controller.yaml#"
'additionalProperties' applies to all properties that are not
accounted-for by 'properties' or 'patternProperties' in
the immediate schema.
First when we combine rockchip-dw-mshc.yaml,
synopsys-dw-mshc-common.yaml and mmc-controller.yaml it gives
for example this error:
arch/arm/boot/dts/rk3036-evb.dt.yaml: mmc@
1021c000:
'default-sample-phase' does not match any of the regexes:
'^.*@[0-9]+$', '^clk-phase-(legacy|sd-hs|mmc-(hs|hs[24]00|ddr52)|
uhs-(sdr(12|25|50|104)|ddr50))$', 'pinctrl-[0-9]+'
'default-sample-phase' is not a valid property name for mmc nodes.
Fix this error by renaming it to 'rockchip,default-sample-phase'.
make ARCH=arm dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200307134841.13803-2-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
bus-width = <4>;
cap-sd-highspeed;
cap-sdio-irq;
- default-sample-phase = <90>;
+ rockchip,default-sample-phase = <90>;
keep-power-in-suspend;
mmc-pwrseq = <&sdio_pwrseq>;
non-removable;
clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
<&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
- default-sample-phase = <158>;
+ rockchip,default-sample-phase = <158>;
disable-wp;
dmas = <&pdma 12>;
dma-names = "rx-tx";
<&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
bus-width = <8>;
- default-sample-phase = <158>;
+ rockchip,default-sample-phase = <158>;
fifo-depth = <0x100>;
pinctrl-names = "default";
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;