- qcom,kryo385
- qcom,kryo468
- qcom,kryo485
+ - qcom,kryo685
- qcom,scorpion
enable-method:
sdm660
sdm845
sm8250
+ sm8350
The 'board' element must be one of the following strings:
- qcom,sm8250-mtp
- const: qcom,sm8250
+ - items:
+ - enum:
+ - qcom,sm8350-mtp
+ - const: qcom,sm8350
+
additionalProperties: true
...
* "qcom,scm-sc7180"
* "qcom,scm-sdm845"
* "qcom,scm-sm8150"
+ * "qcom,scm-sm8250"
+ * "qcom,scm-sm8350"
and:
* "qcom,scm"
- clocks: Specifies clocks needed by the SCM interface, if any:
description: Aeroflex Gaisler AB
"^al,.*":
description: Annapurna Labs
+ "^alcatel,.*":
+ description: Alcatel
"^allegro,.*":
description: Allegro DVT
"^allo,.*":
# SPDX-License-Identifier: GPL-2.0
dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb
+dtb-$(CONFIG_ARCH_QCOM) += apq8094-sony-xperia-kitakami-karin_windy.dtb
dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb
dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb
dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb
dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8150.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8910.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a3u-eur.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a5u-eur.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8992-bullhead-rev-101.dtb
-dtb-$(CONFIG_ARCH_QCOM) += msm8992-msft-lumia-talkman.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8992-msft-lumia-octagon-talkman.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8992-xiaomi-libra.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8994-angler-rev-101.dtb
-dtb-$(CONFIG_ARCH_QCOM) += msm8994-msft-lumia-cityman.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8994-msft-lumia-octagon-cityman.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-ivy.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-karin.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-satsuki.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-sumire.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-suzuran.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8998-asus-novago-tp370ql.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8998-hp-envy-x2.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r3.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm845-db845c.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm845-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sdm845-oneplus-enchilada.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sdm845-oneplus-fajita.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-beryllium.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8150-hdk.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8150-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8250-hdk.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8250-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sm8350-mtp.dtb
status = "okay";
};
+&mdss {
+ status = "okay";
+};
+
&pm8916_resin {
status = "okay";
linux,code = <KEY_VOLUMEDOWN>;
--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+/* As the names may imply, there is quite a bunch of duplication there. */
+#include "msm8994-sony-xperia-kitakami-karin.dts"
+
+/ {
+ model = "Sony Xperia Z4 Tablet (Wi-Fi)";
+ compatible = "sony,karin_windy", "qcom,apq8094";
+
+ /*
+ * This model uses the APQ variant of MSM8994 (APQ8094).
+ * The v1/v2/v2.1 story (from kitakami.dtsi) also applies here.
+ */
+ qcom,msm-id = <253 0x20000>, <253 0x20001>;
+};
+
+/delete-node/ &pm8994_l1;
+/delete-node/ &pm8994_l19;
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-pm8916.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Alcatel OneTouch Idol 3 (4.7)";
+ compatible = "alcatel,idol347", "qcom,msm8916";
+
+ aliases {
+ serial0 = &blsp1_uart2;
+ };
+
+ chosen {
+ stdout-path = "serial0";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_keys_default>;
+
+ label = "GPIO Buttons";
+
+ volume-up {
+ label = "Volume Up";
+ gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+ };
+
+ usb_id: usb-id {
+ compatible = "linux,extcon-usb-gpio";
+ id-gpio = <&msmgpio 69 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_id_default>;
+ };
+};
+
+&blsp1_uart2 {
+ status = "okay";
+};
+
+&blsp_i2c5 {
+ status = "okay";
+
+ magnetometer@c {
+ compatible = "asahi-kasei,ak09911";
+ reg = <0x0c>;
+ vdd-supply = <&pm8916_l17>;
+ vid-supply = <&pm8916_l6>;
+ reset-gpios = <&msmgpio 8 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mag_reset_default>;
+ mount-matrix = "0", "1", "0",
+ "-1", "0", "0",
+ "0", "0", "1";
+ };
+
+ accelerometer@f {
+ compatible = "kionix,kxtj21009";
+ reg = <0x0f>;
+ vdd-supply = <&pm8916_l17>;
+ vddio-supply = <&pm8916_l6>;
+ interrupt-parent = <&msmgpio>;
+ interrupts = <31 IRQ_TYPE_EDGE_RISING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&accel_int_default>;
+ mount-matrix = "-1", "0", "0",
+ "0", "1", "0",
+ "0", "0", "-1";
+ };
+
+ proximity@48 {
+ compatible = "sensortek,stk3310";
+ reg = <0x48>;
+ interrupt-parent = <&msmgpio>;
+ interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&proximity_int_default>;
+ };
+
+ gyroscope@68 {
+ compatible = "bosch,bmg160";
+ reg = <0x68>;
+ vdd-supply = <&pm8916_l17>;
+ vddio-supply = <&pm8916_l6>;
+ interrupt-parent = <&msmgpio>;
+ interrupts = <97 IRQ_TYPE_EDGE_RISING>,
+ <98 IRQ_TYPE_EDGE_RISING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gyro_int_default>;
+ };
+};
+
+&pm8916_resin {
+ status = "okay";
+ linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&pm8916_vib {
+ status = "okay";
+};
+
+&pronto {
+ status = "okay";
+};
+
+&sdhc_1 {
+ status = "okay";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
+ pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
+};
+
+&sdhc_2 {
+ status = "okay";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
+ pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
+
+ cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
+};
+
+&usb {
+ status = "okay";
+ extcon = <&usb_id>, <&usb_id>;
+};
+
+&usb_hs_phy {
+ extcon = <&usb_id>;
+};
+
+&smd_rpm_regulators {
+ vdd_l1_l2_l3-supply = <&pm8916_s3>;
+ vdd_l4_l5_l6-supply = <&pm8916_s4>;
+ vdd_l7-supply = <&pm8916_s4>;
+
+ s3 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1300000>;
+ };
+
+ s4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2100000>;
+ };
+
+ l1 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ l4 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ };
+
+ l5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l8 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2900000>;
+ };
+
+ l9 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ l10 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ l11 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-allow-set-load;
+ regulator-system-load = <200000>;
+ };
+
+ l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ l13 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+ };
+
+ l14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ l15 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ l16 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ l17 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ l18 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ };
+};
+
+&msmgpio {
+ accel_int_default: accel-int-default {
+ pins = "gpio31";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ gpio_keys_default: gpio-keys-default {
+ pins = "gpio107";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ gyro_int_default: gyro-int-default {
+ pins = "gpio97", "gpio98";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ mag_reset_default: mag-reset-default {
+ pins = "gpio8";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ proximity_int_default: proximity-int-default {
+ pins = "gpio12";
+ function = "gpio";
+
+ drive-strength = <6>;
+ bias-pull-up;
+ };
+
+ usb_id_default: usb-id-default {
+ pins = "gpio69";
+ function = "gpio";
+
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-pm8916.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Asus Zenfone 2 Laser";
+ compatible = "asus,z00l", "qcom,msm8916";
+
+ aliases {
+ serial0 = &blsp1_uart2;
+ };
+
+ chosen {
+ stdout-path = "serial0";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_keys_default>;
+
+ label = "GPIO Buttons";
+
+ volume-up {
+ label = "Volume Up";
+ gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ debounce-interval = <15>;
+ };
+
+ volume-down {
+ label = "Volume Down";
+ gpios = <&msmgpio 117 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ debounce-interval = <15>;
+ };
+ };
+
+ usb_id: usb-id {
+ compatible = "linux,extcon-usb-gpio";
+ id-gpios = <&msmgpio 110 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_id_default>;
+ };
+};
+
+&blsp1_uart2 {
+ status = "okay";
+};
+
+&pronto {
+ status = "okay";
+};
+
+&sdhc_1 {
+ status = "okay";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
+ pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
+};
+
+&usb {
+ status = "okay";
+ extcon = <&usb_id>, <&usb_id>;
+};
+
+&usb_hs_phy {
+ extcon = <&usb_id>;
+};
+
+&smd_rpm_regulators {
+ vdd_l1_l2_l3-supply = <&pm8916_s3>;
+ vdd_l4_l5_l6-supply = <&pm8916_s4>;
+ vdd_l7-supply = <&pm8916_s4>;
+
+ s3 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1300000>;
+ };
+
+ s4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2100000>;
+ };
+
+ l1 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ l4 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ };
+
+ l5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l8 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2900000>;
+ };
+
+ l9 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ l10 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ l11 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-allow-set-load;
+ regulator-system-load = <200000>;
+ };
+
+ l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ l13 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+ };
+
+ l14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ l15 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ l16 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ l17 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ l18 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ };
+};
+
+&msmgpio {
+ gpio_keys_default: gpio-keys-default {
+ pins = "gpio107", "gpio117";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ usb_id_default: usb-id-default {
+ pins = "gpio110";
+ function = "gpio";
+
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-pm8916.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ model = "BQ Aquaris X5 (Longcheer L8910)";
+ compatible = "longcheer,l8910", "qcom,msm8916";
+
+ aliases {
+ serial0 = &blsp1_uart2;
+ };
+
+ chosen {
+ stdout-path = "serial0";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_keys_default>;
+
+ label = "GPIO Buttons";
+
+ volume-up {
+ label = "Volume Up";
+ gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ gpios = <&msmgpio 17 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_WHITE>;
+ default-state = "off";
+ function = LED_FUNCTION_KBD_BACKLIGHT;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&button_backlight_default>;
+ };
+ };
+
+ usb_id: usb-id {
+ compatible = "linux,extcon-usb-gpio";
+ id-gpio = <&msmgpio 110 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_id_default>;
+ };
+};
+
+&blsp_i2c3 {
+ status = "okay";
+
+ magnetometer@d {
+ compatible = "asahi-kasei,ak09911";
+ reg = <0x0d>;
+
+ vdd-supply = <&pm8916_l17>;
+ vid-supply = <&pm8916_l6>;
+
+ reset-gpios = <&msmgpio 111 GPIO_ACTIVE_LOW>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mag_reset_default>;
+ };
+
+ imu@68 {
+ compatible = "bosch,bmi160";
+ reg = <0x68>;
+
+ vdd-supply = <&pm8916_l17>;
+ vddio-supply = <&pm8916_l6>;
+
+ mount-matrix = "0", "1", "0",
+ "-1", "0", "0",
+ "0", "0", "1";
+ };
+};
+
+&blsp1_uart2 {
+ status = "okay";
+};
+
+&pm8916_resin {
+ status = "okay";
+ linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&pm8916_vib {
+ status = "okay";
+};
+
+&pronto {
+ status = "okay";
+};
+
+&sdhc_1 {
+ status = "okay";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
+ pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
+};
+
+&sdhc_2 {
+ status = "okay";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
+ pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
+
+ cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
+};
+
+&usb {
+ status = "okay";
+ extcon = <&usb_id>, <&usb_id>;
+};
+
+&usb_hs_phy {
+ extcon = <&usb_id>;
+};
+
+&smd_rpm_regulators {
+ vdd_l1_l2_l3-supply = <&pm8916_s3>;
+ vdd_l4_l5_l6-supply = <&pm8916_s4>;
+ vdd_l7-supply = <&pm8916_s4>;
+
+ s3 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1300000>;
+ };
+
+ s4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2100000>;
+ };
+
+ l1 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ l4 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ };
+
+ l5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l8 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2900000>;
+ };
+
+ l9 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ l10 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ l11 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-allow-set-load;
+ regulator-system-load = <200000>;
+ };
+
+ l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ l13 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+ };
+
+ l14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ l15 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ l16 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ l17 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ l18 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ };
+};
+
+&msmgpio {
+ button_backlight_default: button-backlight-default {
+ pins = "gpio17";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ gpio_keys_default: gpio-keys-default {
+ pins = "gpio107";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ mag_reset_default: mag-reset-default {
+ pins = "gpio111";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ usb_id_default: usb-id-default {
+ pins = "gpio110";
+ function = "gpio";
+
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+};
bias-disable;
};
+ i2c3_default: i2c3-default {
+ pins = "gpio10", "gpio11";
+ function = "blsp_i2c3";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ i2c3_sleep: i2c3-sleep {
+ pins = "gpio10", "gpio11";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
i2c4_default: i2c4-default {
pins = "gpio14", "gpio15";
function = "blsp_i2c4";
interrupt-parent = <&msmgpio>;
interrupts = <115 IRQ_TYPE_EDGE_RISING>;
+ vdd-supply = <&pm8916_l17>;
+ vddio-supply = <&pm8916_l5>;
+
pinctrl-names = "default";
pinctrl-0 = <&accel_int_default>;
};
magnetometer@12 {
compatible = "bosch,bmc150_magn";
reg = <0x12>;
+
+ vdd-supply = <&pm8916_l17>;
+ vddio-supply = <&pm8916_l5>;
};
};
pinctrl-1 = <&mdss_sleep>;
};
+&mdss {
+ status = "okay";
+};
+
&pm8916_resin {
status = "okay";
linux,code = <KEY_VOLUMEDOWN>;
&pronto {
iris {
- compatible = "qcom,wcn3680";
+ compatible = "qcom,wcn3660b";
};
};
no-map;
};
- reserved@8668000 {
+ reserved@86680000 {
reg = <0x0 0x86680000 0x0 0x80000>;
no-map;
};
qcom,client-id = <1>;
};
- rfsa@867e00000 {
+ rfsa@867e0000 {
reg = <0x0 0x867e0000 0x0 0x20000>;
no-map;
};
};
mdss: mdss@1a00000 {
+ status = "disabled";
compatible = "qcom,mdss";
reg = <0x01a00000 0x1000>,
<0x01ac8000 0x3000>;
status = "disabled";
};
+ blsp_i2c3: i2c@78b7000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x078b7000 0x500>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+ <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>;
+ clock-names = "iface", "core";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c3_default>;
+ pinctrl-1 = <&i2c3_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
blsp_spi3: spi@78b7000 {
compatible = "qcom,spi-qup-v2.2.1";
reg = <0x078b7000 0x500>;
/dts-v1/;
#include "msm8992.dtsi"
+#include "pm8994.dtsi"
+#include "pmi8994.dtsi"
/ {
model = "LG Nexus 5X";
};
&rpm_requests {
- pm8994-regulators {
+ pm8994_regulators: pm8994-regulators {
compatible = "qcom,rpm-pm8994-regulators";
vdd_l1-supply = <&pm8994_s1>;
vdd_l4_27_31-supply = <&pm8994_s3>;
vdd_l5_7-supply = <&pm8994_s3>;
vdd_l6_12_32-supply = <&pm8994_s5>;
- vdd_l8_16_30-supply = <&vreg_vph_pwr>;
- vdd_l9_10_18_22-supply = <&vreg_vph_pwr>;
- vdd_l13_19_23_24-supply = <&vreg_vph_pwr>;
+ vdd_l8_16_30-supply = <&vph_pwr>;
+ vdd_l9_10_18_22-supply = <&vph_pwr>;
+ vdd_l13_19_23_24-supply = <&vph_pwr>;
vdd_l14_15-supply = <&pm8994_s5>;
- vdd_l17_29-supply = <&vreg_vph_pwr>;
- vdd_l20_21-supply = <&vreg_vph_pwr>;
+ vdd_l17_29-supply = <&vph_pwr>;
+ vdd_l20_21-supply = <&vph_pwr>;
vdd_l25-supply = <&pm8994_s5>;
vdd_lvs1_2 = <&pm8994_s4>;
+ /* S1, S2, S6 and S12 are managed by RPMPD */
+
pm8994_s1: s1 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <800000>;
regulator-max-microvolt = <1000000>;
};
+ /* S8, S9, S10 and S11 - SPMI-managed VDD_APC */
+
pm8994_l1: l1 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-max-microvolt = <1225000>;
};
- pm8994_l5: l5 {
- /* TODO */
- };
+ /* L5 is inaccessible from RPM */
pm8994_l6: l6 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
- pm8994_l7: l7 {
- /* TODO */
- };
+ /* L7 is inaccessible from RPM */
pm8994_l8: l8 {
regulator-min-microvolt = <1800000>;
*/
};
};
+
+ pmi8994_regulators: pmi8994-regulators {
+ compatible = "qcom,rpm-pmi8994-regulators";
+
+ vdd_s1-supply = <&vph_pwr>;
+ vdd_bst_byp-supply = <&vph_pwr>;
+
+ pmi8994_s1: s1 {};
+
+ /* S2 & S3 - VDD_GFX */
+
+ pmi8994_bby: boost-bypass {};
+ };
};
-&sdhc_1 {
+&sdhc1 {
status = "okay";
mmc-hs400-1_8v;
--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org>
+ * Copyright (c) 2020, Gustave Monce <gustave.monce@outlook.com>
+ */
+
+/dts-v1/;
+
+#include "msm8992.dtsi"
+#include "msm8994-msft-lumia-octagon.dtsi"
+
+/ {
+ model = "Microsoft Lumia 950";
+ compatible = "microsoft,talkman", "qcom,msm8992";
+};
+++ /dev/null
-// SPDX-License-Identifier: BSD-3-Clause
-/*
- * Copyright (c) 2020, Konrad Dybcio
- */
-
-/dts-v1/;
-
-#include "msm8992.dtsi"
-#include "pm8994.dtsi"
-#include "pmi8994.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/gpio-keys.h>
-
-/ {
- model = "Microsoft Lumia 950";
- compatible = "microsoft,talkman", "qcom,msm8992";
-
- /* Most Lumia 950 users use GRUB to load their kernels,
- * hence there is no need for msm-id and friends.
- */
-
- /* This enables graphical output via bootloader-enabled display.
- * acpi=no is required due to WP platforms having ACPI support, but
- * only for Windows-based OSes.
- */
- chosen {
- bootargs = "earlycon=efifb console=efifb acpi=no";
-
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
- };
-};
-
-&blsp_i2c1 {
- status = "okay";
-
- rmi4-i2c-dev@4b {
- compatible = "syna,rmi4-i2c";
- reg = <0x4b>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- interrupt-parent = <&tlmm>;
- interrupts = <77 IRQ_TYPE_EDGE_FALLING>;
-
- rmi4-f01@1 {
- reg = <0x01>;
- syna,nosleep-mode = <1>;
- };
-
- rmi4-f12@12 {
- reg = <0x12>;
- syna,sensor-type = <1>;
- syna,clip-x-low = <0>;
- syna,clip-x-high = <1440>;
- syna,clip-y-low = <0>;
- syna,clip-y-high = <2560>;
- };
- };
-};
-
-&sdhc_1 {
- status = "okay";
-
- mmc-hs200-1_8v;
-};
pmsg-size = <0x20000>;
};
- continuous_splash: framebuffer@3401000{
- reg = <0x0 0x3401000 0x0 0x2200000>;
- no-map;
- };
-
- dfps_data_mem: dfps_data_mem@3400000 {
- reg = <0x0 0x3400000 0x0 0x1000>;
- no-map;
- };
-
- peripheral_region: peripheral_region@7400000 {
- reg = <0x0 0x7400000 0x0 0x1c00000>;
- no-map;
- };
-
modem_region: modem_region@9000000 {
reg = <0x0 0x9000000 0x0 0x5a00000>;
no-map;
};
};
-&blsp_i2c2 {
+&blsp1_i2c2 {
status = "okay";
/* Atmel or Synaptics touchscreen */
};
-&blsp_i2c5 {
+&blsp1_i2c5 {
status = "okay";
- /* Silabs si4705 FM transmitter */
+ /* ST lsm6db0 gyro/accelerometer */
};
-&blsp_i2c6 {
+&blsp1_i2c6 {
status = "okay";
- /* NCI NFC,
+ /*
+ * NXP NCI NFC,
* TI USB320 Type-C controller,
* Pericom 30216a USB (de)mux switch
*/
};
-&blsp_i2c7 {
+&blsp2_i2c1 {
status = "okay";
/* cm36686 proximity and ambient light sensor */
};
-&blsp_i2c13 {
+&blsp2_i2c5 {
status = "okay";
- /* ST lsm6db0 gyro/accelerometer */
+ /* Silabs si4705 FM transmitter */
};
&blsp2_uart2 {
status = "okay";
};
+&peripheral_region {
+ reg = <0x0 0x7400000 0x0 0x1c00000>;
+ no-map;
+};
+
&rpm_requests {
pm8994-regulators {
compatible = "qcom,rpm-pm8994-regulators";
vdd_l4_27_31-supply = <&pm8994_s3>;
vdd_l5_7-supply = <&pm8994_s3>;
vdd_l6_12_32-supply = <&pm8994_s5>;
- vdd_l8_16_30-supply = <&vreg_vph_pwr>;
- vdd_l9_10_18_22-supply = <&vreg_vph_pwr>;
- vdd_l13_19_23_24-supply = <&vreg_vph_pwr>;
+ vdd_l8_16_30-supply = <&vph_pwr>;
+ vdd_l9_10_18_22-supply = <&vph_pwr>;
+ vdd_l13_19_23_24-supply = <&vph_pwr>;
vdd_l14_15-supply = <&pm8994_s5>;
- vdd_l17_29-supply = <&vreg_vph_pwr>;
- vdd_l20_21-supply = <&vreg_vph_pwr>;
+ vdd_l17_29-supply = <&vph_pwr>;
+ vdd_l20_21-supply = <&vph_pwr>;
vdd_l25-supply = <&pm8994_s5>;
vdd_lvs1_2 = <&pm8994_s4>;
- pm8994_s1: s1 {
- /* unused */
- status = "disabled";
- };
-
- pm8994_s2: s2 {
- /* unused */
- status = "disabled";
- };
+ /* S1, S2, S6 and S12 are managed by RPMPD */
pm8994_s3: s3 {
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1000000>;
};
+ /* S8, S9, S10 and S11 - SPMI-managed VDD_APC */
+
pm8994_l1: l1 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-max-microvolt = <1225000>;
};
- pm8994_l5: l5 {
- /* unused */
- status = "disabled";
- };
+ /* L5 is inaccessible from RPM */
pm8994_l6: l6 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
- pm8994_l7: l7 {
- /* unused */
- status = "disabled";
- };
+ /* L7 is inaccessible from RPM */
pm8994_l8: l8 {
regulator-min-microvolt = <1800000>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
+
+ pm8994_lvs1: lvs1 {};
+ pm8994_lvs2: lvs2 {};
+ };
+
+ pmi8994_regulators: pmi8994-regulators {
+ compatible = "qcom,rpm-pmi8994-regulators";
+ vdd_s1-supply = <&vph_pwr>;
+ vdd_bst_byp-supply = <&vph_pwr>;
+
+ pmi8994_s1: s1 {
+ regulator-min-microvolt = <1025000>;
+ regulator-max-microvolt = <1025000>;
+ };
+
+ /* S2 & S3 - VDD_GFX */
+
+ pmi8994_bby: boost-bypass {
+ regulator-min-microvolt = <3150000>;
+ regulator-max-microvolt = <3600000>;
+ };
};
};
-&sdhc_1 {
+&sdhc1 {
status = "okay";
mmc-hs400-1_8v;
/* Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
*/
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/qcom,gcc-msm8994.h>
+#include "msm8994.dtsi"
-/ {
- interrupt-parent = <&intc>;
+/* 8992 only features 2 A57 cores. */
+/delete-node/ &CPU6;
+/delete-node/ &CPU7;
+/delete-node/ &cpu6_map;
+/delete-node/ &cpu7_map;
- #address-cells = <2>;
- #size-cells = <2>;
-
- chosen { };
-
- cpus {
- #address-cells = <2>;
- #size-cells = <0>;
-
- CPU0: cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a53";
- reg = <0x0 0x0>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- L2_0: l2-cache {
- compatible = "cache";
- cache-level = <2>;
- };
- };
-
- CPU1: cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a53";
- reg = <0x0 0x1>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- CPU2: cpu@2 {
- device_type = "cpu";
- compatible = "arm,cortex-a53";
- reg = <0x0 0x2>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- CPU3: cpu@3 {
- device_type = "cpu";
- compatible = "arm,cortex-a53";
- reg = <0x0 0x3>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- CPU4: cpu@100 {
- device_type = "cpu";
- compatible = "arm,cortex-a57";
- reg = <0x0 0x100>;
- next-level-cache = <&L2_1>;
- enable-method = "psci";
- L2_1: l2-cache {
- compatible = "cache";
- cache-level = <2>;
- };
- };
-
- CPU5: cpu@101 {
- device_type = "cpu";
- compatible = "arm,cortex-a57";
- reg = <0x0 0x101>;
- next-level-cache = <&L2_1>;
- enable-method = "psci";
- };
-
- cpu-map {
- cluster0 {
- core0 {
- cpu = <&CPU0>;
- };
-
- core1 {
- cpu = <&CPU1>;
- };
-
- core2 {
- cpu = <&CPU2>;
- };
-
- core3 {
- cpu = <&CPU3>;
- };
- };
-
- cluster1 {
- core0 {
- cpu = <&CPU4>;
- };
-
- core1 {
- cpu = <&CPU5>;
- };
- };
- };
- };
-
- clocks {
- xo_board: xo_board {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <19200000>;
- };
-
- sleep_clk: sleep_clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- };
- };
-
- firmware {
- scm {
- compatible = "qcom,scm-msm8994", "qcom,scm";
- };
- };
-
- memory {
- device_type = "memory";
- /* We expect the bootloader to fill in the reg */
- reg = <0 0 0 0>;
- };
-
- pmu {
- compatible = "arm,cortex-a53-pmu";
- interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4)| IRQ_TYPE_LEVEL_HIGH)>;
- };
-
- psci {
- compatible = "arm,psci-0.2";
- method = "hvc";
- };
-
- reserved-memory {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- smem_region: smem@6a00000 {
- reg = <0x0 0x6a00000 0x0 0x200000>;
- no-map;
- };
- };
-
- sfpb_mutex: hwmutex {
- compatible = "qcom,sfpb-mutex";
- syscon = <&sfpb_mutex_regs 0x0 0x100>;
- #hwlock-cells = <1>;
- };
-
- smem {
- compatible = "qcom,smem";
- memory-region = <&smem_region>;
- qcom,rpm-msg-ram = <&rpm_msg_ram>;
- hwlocks = <&sfpb_mutex 3>;
- };
-
- soc {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0 0 0xffffffff>;
- compatible = "simple-bus";
-
- intc: interrupt-controller@f9000000 {
- compatible = "qcom,msm-qgic2";
- interrupt-controller;
- #interrupt-cells = <3>;
- reg = <0xf9000000 0x1000>,
- <0xf9002000 0x1000>;
- };
-
- apcs: mailbox@f900d000 {
- compatible = "qcom,msm8994-apcs-kpss-global", "syscon";
- reg = <0xf900d000 0x2000>;
- #mbox-cells = <1>;
- };
-
- timer@f9020000 {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- compatible = "arm,armv7-timer-mem";
- reg = <0xf9020000 0x1000>;
-
- frame@f9021000 {
- frame-number = <0>;
- interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xf9021000 0x1000>,
- <0xf9022000 0x1000>;
- };
-
- frame@f9023000 {
- frame-number = <1>;
- interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xf9023000 0x1000>;
- status = "disabled";
- };
-
- frame@f9024000 {
- frame-number = <2>;
- interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xf9024000 0x1000>;
- status = "disabled";
- };
-
- frame@f9025000 {
- frame-number = <3>;
- interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xf9025000 0x1000>;
- status = "disabled";
- };
-
- frame@f9026000 {
- frame-number = <4>;
- interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xf9026000 0x1000>;
- status = "disabled";
- };
-
- frame@f9027000 {
- frame-number = <5>;
- interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xf9027000 0x1000>;
- status = "disabled";
- };
-
- frame@f9028000 {
- frame-number = <6>;
- interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xf9028000 0x1000>;
- status = "disabled";
- };
- };
-
- usb3: usb@f92f8800 {
- compatible = "qcom,msm8996-dwc3", "qcom,dwc3";
- reg = <0xf92f8800 0x400>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- clocks = <&gcc GCC_USB30_MASTER_CLK>,
- <&gcc GCC_SYS_NOC_USB3_AXI_CLK>,
- <&gcc GCC_USB30_SLEEP_CLK>,
- <&gcc GCC_USB30_MOCK_UTMI_CLK>;
- clock-names = "core", "iface", "sleep", "mock_utmi", "ref", "xo";
-
- assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
- <&gcc GCC_USB30_MASTER_CLK>;
- assigned-clock-rates = <19200000>, <120000000>;
-
- power-domains = <&gcc USB30_GDSC>;
- qcom,select-utmi-as-pipe-clk;
-
- dwc3@f9200000 {
- compatible = "snps,dwc3";
- reg = <0xf9200000 0xcc00>;
- interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>;
- snps,dis_u2_susphy_quirk;
- snps,dis_enblslpm_quirk;
- maximum-speed = "high-speed";
- dr_mode = "peripheral";
- };
- };
-
- sdhc_1: sdhci@f9824900 {
- compatible = "qcom,sdhci-msm-v4";
- reg = <0xf9824900 0x1a0>, <0xf9824000 0x800>;
- reg-names = "hc_mem", "core_mem";
-
- interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hc_irq", "pwr_irq";
-
- clocks = <&gcc GCC_SDCC1_APPS_CLK>,
- <&gcc GCC_SDCC1_AHB_CLK>,
- <&xo_board>;
- clock-names = "core", "iface", "xo";
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on
- &sdc1_rclk_on>;
- pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off
- &sdc1_rclk_off>;
-
- regulator-always-on;
- bus-width = <8>;
- non-removable;
-
- status = "disabled";
- };
-
- sdhc_2: sdhci@f98a4900 {
- compatible = "qcom,sdhci-msm-v4";
- reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
- reg-names = "hc_mem", "core_mem";
-
- interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hc_irq", "pwr_irq";
-
- clocks = <&gcc GCC_SDCC2_APPS_CLK>,
- <&gcc GCC_SDCC2_AHB_CLK>,
- <&xo_board>;
- clock-names = "core", "iface", "xo";
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>;
- pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;
-
- cd-gpios = <&tlmm 100 0>;
- bus-width = <4>;
- status = "disabled";
- };
-
- blsp1_uart2: serial@f991e000 {
- compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
- reg = <0xf991e000 0x1000>;
- interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_LOW>;
- clock-names = "core", "iface";
- clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
- <&gcc GCC_BLSP1_AHB_CLK>;
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp1_uart2_default>;
- pinctrl-1 = <&blsp1_uart2_sleep>;
- status = "disabled";
- };
-
- blsp_i2c1: i2c@f9923000 {
- compatible = "qcom,i2c-qup-v2.2.1";
- reg = <0xf9923000 0x500>;
- interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_AHB_CLK>,
- <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>;
- clock-names = "iface", "core";
- clock-frequency = <400000>;
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&i2c1_default>;
- pinctrl-1 = <&i2c1_sleep>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- blsp_i2c2: i2c@f9924000 {
- compatible = "qcom,i2c-qup-v2.2.1";
- reg = <0xf9924000 0x500>;
- interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_AHB_CLK>,
- <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
- clock-names = "iface", "core";
- clock-frequency = <400000>;
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&i2c2_default>;
- pinctrl-1 = <&i2c2_sleep>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- /* Somebody was very creative with their numbering scheme downstream... */
-
- blsp_i2c13: i2c@f9927000 {
- compatible = "qcom,i2c-qup-v2.2.1";
- reg = <0xf9927000 0x500>;
- interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_AHB_CLK>,
- <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>;
- clock-names = "iface", "core";
- clock-frequency = <400000>;
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&i2c13_default>;
- pinctrl-1 = <&i2c13_sleep>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- blsp_i2c6: i2c@f9928000 {
- compatible = "qcom,i2c-qup-v2.2.1";
- reg = <0xf9928000 0x500>;
- interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_AHB_CLK>,
- <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>;
- clock-names = "iface", "core";
- clock-frequency = <400000>;
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&i2c6_default>;
- pinctrl-1 = <&i2c6_sleep>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- blsp2_uart2: serial@f995e000 {
- compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
- reg = <0xf995e000 0x1000>;
- interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_LOW>;
- clock-names = "core", "iface";
- clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>,
- <&gcc GCC_BLSP2_AHB_CLK>;
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp2_uart2_default>;
- pinctrl-1 = <&blsp2_uart2_sleep>;
- status = "disabled";
- };
-
- blsp_i2c7: i2c@f9963000 {
- compatible = "qcom,i2c-qup-v2.2.1";
- reg = <0xf9963000 0x500>;
- interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP2_AHB_CLK>,
- <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>;
- clock-names = "iface", "core";
- clock-frequency = <400000>;
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&i2c7_default>;
- pinctrl-1 = <&i2c7_sleep>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- blsp_i2c5: i2c@f9967000 {
- compatible = "qcom,i2c-qup-v2.2.1";
- reg = <0xf9967000 0x500>;
- interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP2_AHB_CLK>,
- <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>;
- clock-names = "iface", "core";
- clock-frequency = <100000>;
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&i2c5_default>;
- pinctrl-1 = <&i2c5_sleep>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- gcc: clock-controller@fc400000 {
- compatible = "qcom,gcc-msm8994";
- #clock-cells = <1>;
- #reset-cells = <1>;
- #power-domain-cells = <1>;
- reg = <0xfc400000 0x2000>;
- };
-
- rpm_msg_ram: memory@fc428000 {
- compatible = "qcom,rpm-msg-ram";
- reg = <0xfc428000 0x4000>;
- };
-
- restart@fc4ab000 {
- compatible = "qcom,pshold";
- reg = <0xfc4ab000 0x4>;
- };
-
- spmi_bus: spmi@fc4c0000 {
- compatible = "qcom,spmi-pmic-arb";
- reg = <0xfc4cf000 0x1000>,
- <0xfc4cb000 0x1000>,
- <0xfc4ca000 0x1000>;
- reg-names = "core", "intr", "cnfg";
- interrupt-names = "periph_irq";
- interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
- qcom,ee = <0>;
- qcom,channel = <0>;
- #address-cells = <2>;
- #size-cells = <0>;
- interrupt-controller;
- #interrupt-cells = <4>;
- };
-
- sfpb_mutex_regs: syscon@fd484000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "syscon";
- reg = <0xfd484000 0x400>;
- };
-
- tlmm: pinctrl@fd510000 {
- compatible = "qcom,msm8994-pinctrl";
- reg = <0xfd510000 0x4000>;
- interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
- gpio-controller;
- gpio-ranges = <&tlmm 0 0 146>;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
-
- blsp1_uart2_default: blsp1-uart2-default {
- function = "blsp_uart2";
- pins = "gpio4", "gpio5";
- drive-strength = <16>;
- bias-disable;
- };
-
- blsp1_uart2_sleep: blsp1-uart2-sleep {
- function = "gpio";
- pins = "gpio4", "gpio5";
- drive-strength = <2>;
- bias-pull-down;
- };
-
- blsp2_uart2_default: blsp2-uart2-default {
- function = "blsp_uart8";
- pins = "gpio45", "gpio46", "gpio47", "gpio48";
- drive-strength = <16>;
- bias-disable;
- };
-
- blsp2_uart2_sleep: blsp2-uart2-sleep {
- function = "gpio";
- pins = "gpio45", "gpio46", "gpio47", "gpio48";
- drive-strength = <2>;
- bias-pull-down;
- };
-
- sdc1_clk_on: clk-on {
- pins = "sdc1_clk";
- bias-disable;
- drive-strength = <6>;
- };
-
- sdc1_clk_off: clk-off {
- pins = "sdc1_clk";
- bias-disable;
- drive-strength = <2>;
- };
-
- sdc1_cmd_on: cmd-on {
- pins = "sdc1_cmd";
- bias-pull-up;
- drive-strength = <6>;
- };
-
- sdc1_cmd_off: cmd-off {
- pins = "sdc1_cmd";
- bias-pull-up;
- drive-strength = <2>;
- };
-
- sdc1_data_on: data-on {
- pins = "sdc1_data";
- bias-pull-up;
- drive-strength = <6>;
- };
-
- sdc1_data_off: data-off {
- pins = "sdc1_data";
- bias-pull-up;
- drive-strength = <2>;
- };
-
- sdc1_rclk_on: rclk-on {
- pins = "sdc1_rclk";
- bias-pull-down;
- };
-
- sdc1_rclk_off: rclk-off {
- pins = "sdc1_rclk";
- bias-pull-down;
- };
-
- i2c1_default: i2c1-default {
- function = "blsp_i2c1";
- pins = "gpio2", "gpio3";
- drive-strength = <2>;
- bias-disable;
- };
-
- i2c1_sleep: i2c1-sleep {
- function = "gpio";
- pins = "gpio2", "gpio3";
- drive-strength = <2>;
- bias-disable;
- };
-
- i2c2_default: i2c2-default {
- function = "blsp_i2c2";
- pins = "gpio6", "gpio7";
- drive-strength = <2>;
- bias-disable;
- };
-
- i2c2_sleep: i2c2-sleep {
- function = "gpio";
- pins = "gpio6", "gpio7";
- drive-strength = <2>;
- bias-disable;
- };
-
- i2c5_default: i2c5-default {
- /* Don't be fooled! Nobody knows the reason why though... */
- function = "blsp_i2c11";
- pins = "gpio83", "gpio84";
- drive-strength = <2>;
- bias-disable;
- };
-
- i2c5_sleep: i2c5-sleep {
- function = "gpio";
- pins = "gpio83", "gpio84";
- drive-strength = <2>;
- bias-disable;
- };
-
- i2c6_default: i2c6-default {
- function = "blsp_i2c6";
- pins = "gpio28", "gpio27";
- drive-strength = <2>;
- bias-disable;
- };
-
- i2c6_sleep: i2c6-sleep {
- function = "gpio";
- pins = "gpio28", "gpio27";
- drive-strength = <2>;
- bias-disable;
- };
-
- i2c7_default: i2c7-default {
- function = "blsp_i2c7";
- pins = "gpio43", "gpio44";
- drive-strength = <2>;
- bias-disable;
- };
-
- i2c7_sleep: i2c7-sleep {
- function = "gpio";
- pins = "gpio43", "gpio44";
- drive-strength = <2>;
- bias-disable;
- };
-
- i2c13_default: i2c13-default {
- /* Not a typo either. */
- function = "blsp_i2c5";
- pins = "gpio23", "gpio24";
- drive-strength = <2>;
- bias-disable;
- };
-
- i2c13_sleep: i2c13-sleep {
- function = "gpio";
- pins = "gpio23", "gpio24";
- drive-strength = <2>;
- bias-disable;
- };
-
- sdc2_clk_on: sdc2-clk-on {
- pins = "sdc2_clk";
- bias-disable;
- drive-strength = <16>;
- };
-
- sdc2_clk_off: sdc2-clk-off {
- pins = "sdc2_clk";
- bias-disable;
- drive-strength = <2>;
- };
-
- sdc2_cmd_on: sdc2-cmd-on {
- pins = "sdc2_cmd";
- bias-pull-up;
- drive-strength = <10>;
- };
-
- sdc2_cmd_off: sdc2-cmd-off {
- pins = "sdc2_cmd";
- bias-pull-up;
- drive-strength = <2>;
- };
-
- sdc2_data_on: sdc2-data-on {
- pins = "sdc2_data";
- bias-pull-up;
- drive-strength = <10>;
- };
-
- sdc2_data_off: sdc2-data-off {
- pins = "sdc2_data";
- bias-pull-up;
- drive-strength = <2>;
- };
- };
- };
-
- smd_rpm: smd {
- compatible = "qcom,smd";
- rpm {
- interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
- qcom,ipc = <&apcs 8 0>;
- qcom,smd-edge = <15>;
- qcom,local-pid = <0>;
- qcom,remote-pid = <6>;
-
- rpm_requests: rpm-requests {
- compatible = "qcom,rpm-msm8994";
- qcom,smd-channels = "rpm_requests";
+&rpmcc {
+ compatible = "qcom,rpmcc-msm8992";
+};
- rpmcc: rpmcc {
- compatible = "qcom,rpmcc-msm8992";
- #clock-cells = <1>;
- };
- };
- };
- };
+&tcsr_mutex {
+ compatible = "qcom,sfpb-mutex";
+};
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+&timer {
+ interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
- };
-
- vreg_vph_pwr: vreg-vph-pwr {
- compatible = "regulator-fixed";
- status = "okay";
- regulator-name = "vph-pwr";
-
- regulator-min-microvolt = <3600000>;
- regulator-max-microvolt = <3600000>;
-
- regulator-always-on;
- };
};
+&tlmm {
+ compatible = "qcom,msm8992-pinctrl";
+};
+++ /dev/null
-// SPDX-License-Identifier: BSD-3-Clause
-/*
- * Copyright (c) 2020, Konrad Dybcio
- */
-
-/dts-v1/;
-
-#include "msm8994.dtsi"
-#include "pm8994.dtsi"
-#include "pmi8994.dtsi"
-
-/ {
- model = "Microsoft Lumia 950 XL";
- compatible = "microsoft,cityman", "qcom,msm8994";
-
- /*
- * Most Lumia 950XL users use GRUB to load their kernels,
- * hence there is no need for msm-id and friends.
- */
-
- /*
- * This enables graphical output via bootloader-enabled display.
- * acpi=no is required due to WP platforms having ACPI support, but
- * only for Windows-based OSes.
- */
- chosen {
- bootargs = "earlycon=efifb console=efifb acpi=no";
-
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
- };
-};
-
-&blsp_i2c1 {
- status = "okay";
-
- rmi4-i2c-dev@4b {
- compatible = "syna,rmi4-i2c";
- reg = <0x4b>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- interrupt-parent = <&tlmm>;
- interrupts = <77 IRQ_TYPE_EDGE_FALLING>;
-
- rmi4-f01@1 {
- reg = <0x01>;
- syna,nosleep-mode = <1>;
- };
-
- rmi4-f12@12 {
- reg = <0x12>;
- syna,sensor-type = <1>;
- syna,clip-x-low = <0>;
- syna,clip-x-high = <1440>;
- syna,clip-y-low = <0>;
- syna,clip-y-high = <2660>;
- };
- };
-};
-
-&blsp1_uart2 {
- status = "okay";
-};
-
-&blsp2_uart2 {
- status = "okay";
-};
-
-&sdhc1 {
- status = "okay";
-};
--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org>
+ * Copyright (c) 2020, Gustave Monce <gustave.monce@outlook.com>
+ */
+
+/dts-v1/;
+
+#include "msm8994.dtsi"
+#include "msm8994-msft-lumia-octagon.dtsi"
+
+/ {
+ model = "Microsoft Lumia 950 XL";
+ compatible = "microsoft,cityman", "qcom,msm8994";
+};
--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Common Board Device Tree for
+ * Microsoft Mobile MSM8994 Octagon Platforms
+ *
+ * Copyright (c) 2020, Konrad Dybcio
+ * Copyright (c) 2020, Gustave Monce <gustave.monce@outlook.com>
+ */
+
+#include "pm8994.dtsi"
+#include "pmi8994.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/*
+ * Delete all generic (msm8994.dtsi) reserved
+ * memory mappings which are different in this device.
+ */
+/delete-node/ &adsp_mem;
+/delete-node/ &audio_mem;
+/delete-node/ &cont_splash_mem;
+/delete-node/ &mba_mem;
+/delete-node/ &mpss_mem;
+/delete-node/ &peripheral_region;
+/delete-node/ &rmtfs_mem;
+/delete-node/ &smem_mem;
+
+/ {
+ /*
+ * Most Lumia 950/XL users use GRUB to load their kernels,
+ * hence there is no need for msm-id and friends.
+ */
+
+ /*
+ * This enables graphical output via bootloader-enabled display.
+ * acpi=no is required due to WP platforms having ACPI support, but
+ * only for Windows-based OSes.
+ */
+ chosen {
+ bootargs = "earlycon=efifb console=efifb acpi=no";
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ };
+
+ clocks {
+ compatible = "simple-bus";
+
+ divclk4: divclk4 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+
+ clock-frequency = <32768>;
+ clock-output-names = "divclk4";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&divclk4_pin_a>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ input-name = "gpio-keys";
+ autorepeat;
+
+ volupkey {
+ label = "Volume Up";
+ gpios = <&pm8994_gpios 3 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_VOLUMEUP>;
+ wakeup-source;
+ debounce-interval = <15>;
+ };
+
+ camsnapkey {
+ label = "Camera Snapshot";
+ gpios = <&pm8994_gpios 4 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_CAMERA>;
+ wakeup-source;
+ debounce-interval = <15>;
+ };
+
+ camfocuskey {
+ label = "Camera Focus";
+ gpios = <&pm8994_gpios 5 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_VOLUMEUP>;
+ wakeup-source;
+ debounce-interval = <15>;
+ };
+ };
+
+ gpio-hall-sensor {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&hall_front_default &hall_back_default>;
+
+ label = "GPIO Hall Effect Sensor";
+
+ hall-front-sensor {
+ label = "Hall Effect Front Sensor";
+ gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>;
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_LID>;
+ linux,can-disable;
+ };
+
+ hall-back-sensor {
+ label = "Hall Effect Back Sensor";
+ gpios = <&tlmm 75 GPIO_ACTIVE_HIGH>;
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_MACHINE_COVER>;
+ linux,can-disable;
+ };
+ };
+
+ reserved-memory {
+ /*
+ * This device being a WP platform has a very different
+ * memory layout than other Android based devices.
+ * This memory layout is directly copied from the original
+ * device UEFI firmware, and adapted based on observations
+ * using JTAG for the Qualcomm Peripheral Image regions.
+ */
+
+ uefi_mem: memory@200000 {
+ reg = <0 0x200000 0 0x100000>;
+ no-map;
+ };
+
+ mppark_mem: memory@300000 {
+ reg = <0 0x300000 0 0x80000>;
+ no-map;
+ };
+
+ fbpt_mem: memory@380000 {
+ reg = <0 0x380000 0 0x1000>;
+ no-map;
+ };
+
+ dbg2_mem: memory@381000 {
+ reg = <0 0x381000 0 0x4000>;
+ no-map;
+ };
+
+ capsule_mem: memory@385000 {
+ reg = <0 0x385000 0 0x1000>;
+ no-map;
+ };
+
+ tpmctrl_mem: memory@386000 {
+ reg = <0 0x386000 0 0x3000>;
+ no-map;
+ };
+
+ uefiinfo_mem: memory@389000 {
+ reg = <0 0x389000 0 0x1000>;
+ no-map;
+ };
+
+ reset_mem: memory@389000 {
+ reg = <0 0x389000 0 0x1000>;
+ no-map;
+ };
+
+ resuncached_mem: memory@38e000 {
+ reg = <0 0x38e000 0 0x72000>;
+ no-map;
+ };
+
+ disp_mem: memory@400000 {
+ reg = <0 0x400000 0 0x800000>;
+ no-map;
+ };
+
+ uefistack_mem: memory@c00000 {
+ reg = <0 0xc00000 0 0x40000>;
+ no-map;
+ };
+
+ cpuvect_mem: memory@c40000 {
+ reg = <0 0xc40000 0 0x10000>;
+ no-map;
+ };
+
+ rescached_mem: memory@400000 {
+ reg = <0 0xc50000 0 0xb0000>;
+ no-map;
+ };
+
+ tzapps_mem: memory@6500000 {
+ reg = <0 0x6500000 0 0x500000>;
+ no-map;
+ };
+
+ smem_mem: memory@6a00000 {
+ reg = <0 0x6a00000 0 0x200000>;
+ no-map;
+ };
+
+ hyp_mem: memory@6c00000 {
+ reg = <0 0x6c00000 0 0x100000>;
+ no-map;
+ };
+
+ tz_mem: memory@6d00000 {
+ reg = <0 0x6d00000 0 0x160000>;
+ no-map;
+ };
+
+ rfsa_adsp_mem: memory@6e60000 {
+ reg = <0 0x6e60000 0 0x10000>;
+ no-map;
+ };
+
+ rfsa_mpss_mem: memory@6e70000 {
+ compatible = "qcom,rmtfs-mem";
+ reg = <0 0x6e70000 0 0x10000>;
+ no-map;
+
+ qcom,client-id = <1>;
+ };
+
+ /*
+ * Value obtained from the device original ACPI DSDT table
+ * MPSS_EFS / SBL
+ */
+ mba_mem: memory@6e80000 {
+ reg = <0 0x6e80000 0 0x180000>;
+ no-map;
+ };
+
+ /*
+ * Peripheral Image loader region begin!
+ * The region reserved for pil is 0x7000000-0xef00000
+ */
+
+ mpss_mem: memory@7000000 {
+ reg = <0 0x7000000 0 0x5a00000>;
+ no-map;
+ };
+
+ adsp_mem: memory@ca00000 {
+ reg = <0 0xca00000 0 0x1800000>;
+ no-map;
+ };
+
+ venus_mem: memory@e200000 {
+ reg = <0 0xe200000 0 0x500000>;
+ no-map;
+ };
+
+ pil_metadata_mem: memory@e700000 {
+ reg = <0 0xe700000 0 0x4000>;
+ no-map;
+ };
+
+ memory@e704000 {
+ reg = <0 0xe704000 0 0x7fc000>;
+ no-map;
+ };
+ /* Peripheral Image loader region end */
+
+ cnss_mem: memory@ef00000 {
+ reg = <0 0xef00000 0 0x300000>;
+ no-map;
+ };
+ };
+};
+
+&blsp1_i2c1 {
+ status = "okay";
+
+ rmi4-i2c-dev@4b {
+ compatible = "syna,rmi4-i2c";
+ reg = <0x4b>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <77 IRQ_TYPE_EDGE_FALLING>;
+
+ rmi4-f01@1 {
+ reg = <0x01>;
+ syna,nosleep-mode = <1>;
+ };
+
+ rmi4-f12@12 {
+ reg = <0x12>;
+ syna,sensor-type = <1>;
+ syna,clip-x-low = <0>;
+ syna,clip-x-high = <1440>;
+ syna,clip-y-low = <0>;
+ syna,clip-y-high = <2560>;
+ };
+ };
+};
+
+&blsp1_i2c2 {
+ status = "okay";
+
+ /*
+ * This device uses the Texas Instruments TAS2553, however the TAS2552 driver
+ * seems to work here. In the future a proper driver might need to
+ * be written for this device.
+ */
+ tas2553: tas2553@40 {
+ compatible = "ti,tas2552";
+ reg = <0x40>;
+
+ vbat-supply = <&vph_pwr>;
+ iovdd-supply = <&vreg_s4a_1p8>;
+ avdd-supply = <&vreg_s4a_1p8>;
+
+ enable-gpio = <&pm8994_gpios 12 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&blsp1_i2c5 {
+ status = "okay";
+
+ ak09912: magnetometer@c {
+ compatible = "asahi-kasei,ak09912";
+ reg = <0xc>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <26 IRQ_TYPE_EDGE_RISING>;
+
+ vdd-supply = <&vreg_l18a_2p85>;
+ vid-supply = <&vreg_lvs2a_1p8>;
+ };
+
+ zpa2326: barometer@5c {
+ compatible = "murata,zpa2326";
+ reg = <0x5c>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <74 IRQ_TYPE_EDGE_RISING>;
+
+ vdd-supply = <&vreg_lvs2a_1p8>;
+ };
+
+ mpu6050: accelerometer@68 {
+ compatible = "invensense,mpu6500";
+ reg = <0x68>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <64 IRQ_TYPE_EDGE_RISING>;
+
+ vdd-supply = <&vreg_lvs2a_1p8>;
+ vddio-supply = <&vreg_lvs2a_1p8>;
+ };
+};
+
+&blsp1_i2c6 {
+ status = "okay";
+
+ pn547: pn547@28 {
+ compatible = "nxp,pn544-i2c";
+
+ reg = <0x28>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <29 IRQ_TYPE_EDGE_RISING>;
+
+ enable-gpios = <&tlmm 30 GPIO_ACTIVE_HIGH>;
+ firmware-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&blsp1_uart2 {
+ status = "okay";
+};
+
+&blsp2_i2c1 {
+ status = "okay";
+
+ sideinteraction: ad7147_captouch@2c {
+ compatible = "ad,ad7147_captouch";
+ reg = <0x2c>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&grip_default>;
+ pinctrl-1 = <&grip_sleep>;
+
+ interrupts = <&tlmm 96 IRQ_TYPE_EDGE_FALLING>;
+
+ button_num = <8>;
+ touchpad_num = <0>;
+ wheel_num = <0>;
+ slider_num = <0>;
+
+ vcc-supply = <&vreg_l18a_2p85>;
+ };
+
+ /*
+ * The QPDS-T900/QPDS-T930 is a customized part built for Nokia
+ * by Avago. It is very similar to the Avago APDS-9930 with some
+ * minor differences. In the future a proper driver might need to
+ * be written for this device. For now this works fine.
+ */
+ qpdst900: qpdst900@39 {
+ compatible = "avago,apds9930";
+ reg = <0x39>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <40 IRQ_TYPE_EDGE_FALLING>;
+ };
+};
+
+&blsp2_i2c5 {
+ status = "okay";
+
+ fm_radio: si4705@11 {
+ compatible = "silabs,si470x";
+ reg = <0x11>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&tlmm 93 GPIO_ACTIVE_HIGH>;
+ };
+
+ vreg_lpddr_1p1: fan53526a@6c {
+ compatible = "fcs,fan53526";
+ reg = <0x6c>;
+
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ vin-supply = <&vph_pwr>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-always-on; /* Turning off DDR power doesn't sound good. */
+ };
+
+ /* ANX7816 HDMI bridge (needs MDSS HDMI) */
+};
+
+&blsp2_spi4 {
+ status = "okay";
+
+ /*
+ * This device is a Lattice UC120 USB-C PD PHY.
+ * It is actually a Lattice iCE40 FPGA pre-programmed by
+ * the device firmware with a specific bitstream
+ * enabling USB Type C PHY functionality.
+ * Communication is done via a proprietary protocol over SPI.
+ *
+ * TODO: Once a proper driver is available, replace this.
+ */
+ uc120: ice5lp2k@0 {
+ compatible = "lattice,ice40-fpga-mgr";
+ reg = <0>;
+ spi-max-frequency = <5000000>;
+ cdone-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&pmi8994_gpios 4 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&blsp2_uart2 {
+ status = "okay";
+
+ qca6174_bt: bluetooth {
+ compatible = "qcom,qca6174-bt";
+
+ enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
+ clocks = <&divclk4>;
+ };
+};
+
+&pm8994_gpios {
+ bt_en_gpios: bt_en_gpios {
+ pinconf {
+ pins = "gpio19";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ output-low;
+ power-source = <PM8994_GPIO_S4>;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+ bias-pull-down;
+ };
+ };
+
+ divclk4_pin_a: divclk4 {
+ pinconf {
+ pins = "gpio18";
+ function = PMIC_GPIO_FUNC_FUNC2;
+ power-source = <PM8994_GPIO_S4>;
+ bias-disable;
+ };
+ };
+};
+
+&pm8994_pon {
+ pwrkey {
+ compatible = "qcom,pm8941-pwrkey";
+ interrupts = <0 8 0 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ linux,code = <KEY_POWER>;
+ };
+
+ volwnkey {
+ compatible = "qcom,pm8941-resin";
+ interrupts = <0 8 1 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+};
+
+&pmi8994_gpios {
+ pinctrl-0 = <&hd3ss460_pol &hd3ss460_amsel &hd3ss460_en>;
+ pinctrl-names = "default";
+
+ /*
+ * This device uses a TI HD3SS460 Type-C MUX
+ * As this device has no driver currently,
+ * the configuration for USB Face Up is set-up here.
+ *
+ * TODO: remove once a driver is available
+ * TODO: add VBUS GPIO 5
+ */
+ hd3ss460_pol: pol_low {
+ pins = "gpio8";
+ drive-strength = <3>;
+ bias-pull-down;
+ };
+
+ hd3ss460_amsel: amsel_high {
+ pins = "gpio9";
+ drive-strength = <1>;
+ bias-pull-up;
+ };
+
+ hd3ss460_en: en_high {
+ pins = "gpio10";
+ drive-strength = <1>;
+ bias-pull-up;
+ };
+};
+
+&pmi8994_spmi_regulators {
+ vdd_gfx: s2@1700 {
+ reg = <0x1700 0x100>;
+ regulator-min-microvolt = <980000>;
+ regulator-max-microvolt = <980000>;
+ };
+};
+
+&rpm_requests {
+ /* These values were taken from the original firmware ACPI tables */
+ pm8994_regulators: pm8994-regulators {
+ compatible = "qcom,rpm-pm8994-regulators";
+
+ vdd_s1-supply = <&vph_pwr>;
+ vdd_s2-supply = <&vph_pwr>;
+ vdd_s3-supply = <&vph_pwr>;
+ vdd_s4-supply = <&vph_pwr>;
+ vdd_s5-supply = <&vph_pwr>;
+ vdd_s6-supply = <&vph_pwr>;
+ vdd_s7-supply = <&vph_pwr>;
+ vdd_s8-supply = <&vph_pwr>;
+ vdd_s9-supply = <&vph_pwr>;
+ vdd_s10-supply = <&vph_pwr>;
+ vdd_s11-supply = <&vph_pwr>;
+ vdd_s12-supply = <&vph_pwr>;
+ vdd_l1-supply = <&vreg_s1b_1p0>;
+ vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>;
+ vdd_l3_l11-supply = <&vreg_s3a_1p3>;
+ vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>;
+ vdd_l5_l7-supply = <&vreg_s5a_2p15>;
+ vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>;
+ vdd_l8_l16_l30-supply = <&vph_pwr>;
+ vdd_l9_l10_l18_l22-supply = <&vph_pwr_bbyp>;
+ vdd_l13_l19_l23_l24-supply = <&vph_pwr_bbyp>;
+ vdd_l14_l15-supply = <&vreg_s5a_2p15>;
+ vdd_l17_l29-supply = <&vph_pwr_bbyp>;
+ vdd_l20_l21-supply = <&vph_pwr_bbyp>;
+ vdd_l25-supply = <&vreg_s5a_2p15>;
+ vdd_lvs1_2-supply = <&vreg_s4a_1p8>;
+
+ /* S1, S2, S6 and S12 are managed by RPMPD */
+
+ vreg_s3a_1p3: s3 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-allow-set-load;
+ regulator-system-load = <300000>;
+ };
+
+ vreg_s4a_1p8: s4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-allow-set-load;
+ regulator-always-on;
+ regulator-system-load = <325000>;
+ };
+
+ vreg_s5a_2p15: s5 {
+ regulator-min-microvolt = <2150000>;
+ regulator-max-microvolt = <2150000>;
+ regulator-allow-set-load;
+ regulator-system-load = <325000>;
+ };
+
+ vreg_s7a_1p0: s7 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ /*
+ * S8 - SPMI-managed VDD_APC0
+ * S9, S10 and S11 (the main one) - SPMI-managed VDD_APC1
+ */
+
+ vreg_l1a_1p0: l1 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ vreg_l2a_1p25: l2 {
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-allow-set-load;
+ regulator-system-load = <4160>;
+ };
+
+ vreg_l3a_1p2: l3 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-allow-set-load;
+ regulator-system-load = <80000>;
+ };
+
+ vreg_l4a_1p225: l4 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ /* L5 is inaccessible from RPM */
+
+ vreg_l6a_1p8: l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-allow-set-load;
+ regulator-system-load = <1000>;
+ };
+
+ /* L7 is inaccessible from RPM */
+
+ vreg_l8a_1p8: l8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vreg_l9a_1p8: l9 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vreg_l10a_1p8: l10 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vreg_l11a_1p2: l11 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-allow-set-load;
+ regulator-system-load = <35000>;
+ };
+
+ vreg_l12a_1p8: l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-allow-set-load;
+ regulator-system-load = <50000>;
+ };
+
+ vreg_l13a_2p95: l13 {
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-always-on;
+ regulator-allow-set-load;
+ regulator-system-load = <22000>;
+ };
+
+ vreg_l14a_1p8: l14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-allow-set-load;
+ regulator-system-load = <52000>;
+ };
+
+ vreg_l15a_1p8: l15 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vreg_l16a_2p7: l16 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ };
+
+ vreg_l17a_2p7: l17 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ regulator-allow-set-load;
+ regulator-system-load = <300000>;
+ };
+
+ vreg_l18a_2p85: l18 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ regulator-allow-set-load;
+ regulator-system-load = <600000>;
+ };
+
+ vreg_l19a_3p3: l19 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-allow-set-load;
+ regulator-system-load = <500000>;
+ };
+
+ vreg_l20a_2p95: l20 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-allow-set-load;
+ regulator-system-load = <570000>;
+ };
+
+ vreg_l21a_2p95: l21 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-always-on;
+ regulator-allow-set-load;
+ regulator-system-load = <800000>;
+ };
+
+ vreg_l22a_3p0: l22 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-allow-set-load;
+ regulator-system-load = <150000>;
+ };
+
+ vreg_l23a_2p8: l23 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ regulator-allow-set-load;
+ regulator-system-load = <80000>;
+ };
+
+ vreg_l24a_3p075: l24 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3150000>;
+ regulator-allow-set-load;
+ regulator-system-load = <5800>;
+ };
+
+ vreg_l25a_1p1: l25 {
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-always-on;
+ regulator-allow-set-load;
+ regulator-system-load = <80000>;
+ };
+
+ vreg_l26a_1p0: l26 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ vreg_l27a_1p05: l27 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-allow-set-load;
+ regulator-system-load = <500000>;
+ };
+
+ vreg_l28a_1p0: l28 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-allow-set-load;
+ regulator-system-load = <26000>;
+ };
+
+ vreg_l29a_2p8: l29 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ regulator-allow-set-load;
+ regulator-system-load = <80000>;
+ };
+
+ vreg_l30a_1p8: l30 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-allow-set-load;
+ regulator-system-load = <2500>;
+ };
+
+ vreg_l31a_1p2: l31 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-allow-set-load;
+ regulator-system-load = <600000>;
+ };
+
+ vreg_l32a_1p8: l32 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vreg_lvs1a_1p8: lvs1 { };
+
+ vreg_lvs2a_1p8: lvs2 { };
+ };
+
+ pmi8994_regulators: pmi8994-regulators {
+ compatible = "qcom,rpm-pmi8994-regulators";
+
+ vdd_s1-supply = <&vph_pwr>;
+ vdd_bst_byp-supply = <&vph_pwr>;
+
+ vreg_s1b_1p0: s1 {
+ regulator-min-microvolt = <1025000>;
+ regulator-max-microvolt = <1025000>;
+ };
+
+ /* S2 & S3 - VDD_GFX */
+
+ vph_pwr_bbyp: boost-bypass {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ };
+};
+
+&sdhc1 {
+ status = "okay";
+
+ /*
+ * This device is shipped with HS400 capabable eMMCs
+ * However various brands have been used in various product batches,
+ * including a Samsung eMMC (BGND3R) which features a quirk with HS400.
+ * Set the speed to HS200 as a safety measure.
+ */
+ mmc-hs200-1_8v;
+};
+
+&sdhc2 {
+ status = "okay";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>;
+ pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;
+
+ vmmc-supply = <&vreg_l21a_2p95>;
+ vqmmc-supply = <&vreg_l13a_2p95>;
+
+ cd-gpios = <&pm8994_gpios 8 GPIO_ACTIVE_LOW>;
+};
+
+&tlmm {
+ grip_default: grip-default {
+ pins = "gpio39";
+ function = "gpio";
+ drive-strength = <6>;
+ bias-pull-down;
+ };
+
+ grip_sleep: grip-sleep {
+ pins = "gpio39";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ hall_front_default: hall-front-default {
+ pins = "gpio42";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ hall_back_default: hall-back-default {
+ pins = "gpio75";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "msm8994-sony-xperia-kitakami.dtsi"
+
+/ {
+ model = "Sony Xperia Z3+/Z4";
+ compatible = "sony,ivy-row", "qcom,msm8994";
+};
+
+&pm8994_l3 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+};
+
+&pm8994_l17 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+};
+
+/delete-node/ &pm8994_l19;
+/delete-node/ &pm8994_l32;
--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "msm8994-sony-xperia-kitakami.dtsi"
+
+/ {
+ model = "Sony Xperia Z4 Tablet (LTE)";
+ compatible = "sony,karin-row", "qcom,msm8994";
+};
+
+&blsp2_i2c5 {
+ /*
+ * TI LP8557 backlight driver @ 2c
+ * AD AD7146 touch controller @ 2f
+ * sii8620 HDMI/MHL bridge @ 72 (kitakami-common)
+ */
+};
+
+&pm8994_l3 {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+};
+
+&pm8994_l17 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+};
+
+&pm8994_l22 {
+ regulator-min-microvolt = <3100000>;
+ regulator-max-microvolt = <3100000>;
+};
+
+&pm8994_l25 {
+ regulator-min-microvolt = <1037500>;
+ regulator-max-microvolt = <1037500>;
+};
+
+/delete-node/ &pm8994_l32;
+/* Z4 tablets use a different touchscreen. */
+/delete-node/ &touchscreen;
--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "msm8994-sony-xperia-kitakami.dtsi"
+
+/ {
+ model = "Sony Xperia Z5 Premium";
+ compatible = "sony,satsuki-row", "qcom,msm8994";
+};
+
+&pm8994_l14 {
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <1850000>;
+};
// SPDX-License-Identifier: BSD-3-Clause
/*
- * Copyright (c) 2020, Konrad Dybcio
+ * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org>
*/
/dts-v1/;
model = "Sony Xperia Z5";
compatible = "sony,sumire-row", "qcom,msm8994";
};
+
+/delete-node/ &pm8994_l19;
--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "msm8994-sony-xperia-kitakami.dtsi"
+
+/ {
+ model = "Sony Xperia Z5 Compact";
+ compatible = "sony,suzuran-row", "qcom,msm8994";
+};
+
+&pm8994_l14 {
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+};
+
+/delete-node/ &pm8994_l19;
// SPDX-License-Identifier: BSD-3-Clause
/*
- * Copyright (c) 2020, Konrad Dybcio
+ * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org>
*/
#include "msm8994.dtsi"
/ {
/* required for bootloader to select correct board */
- qcom,msm-id = <0xcf 0x20001>;
+
+ /*
+ * We support MSM8994 v2 (0x20000) and v2.1 (0x20001).
+ * The V1 chip (0x0 and 0x10000) is significantly different
+ * and requires driver-side changes (including CPR, be warned!!).
+ * Besides that, it's very rare.
+ */
+ qcom,msm-id = <207 0x20000>, <207 0x20001>;
+ /* We only use pm8994+pmi8994. */
qcom,pmic-id = <0x10009 0x1000a 0x00 0x00>;
+ /* This property is shared across all kitakami devices. */
qcom,board-id = <8 0>;
/* Kitakami firmware doesn't support PSCI */
};
reserved-memory {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
/* This is for getting crash logs using Android downstream kernels */
ramoops@1fe00000 {
compatible = "ramoops";
- reg = <0x0 0x1fe00000 0x0 0x200000>;
+ reg = <0 0x1fe00000 0 0x200000>;
console-size = <0x100000>;
record-size = <0x10000>;
ftrace-size = <0x10000>;
pmsg-size = <0x80000>;
};
- continuous_splash: framebuffer@3401000{
- reg = <0x0 0x3401000 0x0 0x2200000>;
- no-map;
- };
-
- dfps_data_mem: dfps_data_mem@3400000 {
- reg = <0x0 0x3400000 0x0 0x1000>;
- no-map;
- };
-
- peripheral_region: peripheral_region@7400000 {
- reg = <0x0 0x7400000 0x0 0x1c00000>;
- no-map;
- };
-
- modem_region: modem_region@9000000 {
- reg = <0x0 0x9000000 0x0 0x5a00000>;
- no-map;
- };
-
- tzapp: modem_region@ea00000 {
- reg = <0x0 0xea00000 0x0 0x1900000>;
+ fb_region: fb_region@40000000 {
+ reg = <0 0x40000000 0 0x1000000>;
no-map;
};
- fb_region: fb_region@40000000 {
- reg = <0x00 0x40000000 0x00 0x1000000>;
+ tzapp: memory@c7800000 {
+ reg = <0 0xc7800000 0 0x1900000>;
no-map;
};
};
};
-&blsp_spi0 {
+&blsp1_spi1 {
status = "okay";
/* FPC fingerprint reader */
/* I2C1 is disabled on this board */
-&blsp_i2c2 {
+&blsp1_i2c2 {
status = "okay";
+ clock-frequency = <355000>;
- /* NXP NFC */
+ /* NXP PN547 NFC */
};
-&blsp_i2c4 {
+&blsp1_i2c4 {
status = "okay";
+ clock-frequency = <355000>;
/* Empty but active */
};
-&blsp_i2c5 {
+&blsp1_i2c6 {
status = "okay";
+ clock-frequency = <355000>;
- /* SMB1357 charger and sii8620 HDMI/MHL bridge */
-};
+ touchscreen: rmi4-i2c-dev@2c {
+ compatible = "syna,rmi4-i2c";
+ reg = <0x2c>;
+ #address-cells = <1>;
+ #size-cells = <0>;
-&blsp_i2c6 {
- status = "okay";
+ interrupt-parent = <&tlmm>;
+ interrupts = <42 IRQ_TYPE_EDGE_FALLING>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&ts_int_active &ts_reset_active>;
+
+ vdd-supply = <&pm8994_l22>;
+ vio-supply = <&pm8994_s4>;
+
+ syna,reset-delay-ms = <220>;
+ syna,startup-delay-ms = <220>;
- /* Synaptics touchscreen */
+ rmi4-f01@1 {
+ reg = <0x01>;
+ syna,nosleep-mode = <1>;
+ };
+
+ rmi4-f11@11 {
+ reg = <0x11>;
+ syna,sensor-type = <1>;
+ };
+ };
};
&blsp1_uart2 {
status = "okay";
};
+&blsp2_i2c5 {
+ status = "okay";
+ clock-frequency = <355000>;
+
+ /* sii8620 HDMI/MHL bridge */
+};
+
&blsp2_uart2 {
status = "okay";
};
+/*
+ * Kitakami bootloader only turns cont_splash on when it detects
+ * specific downstream MDSS/backlight nodes in the active DTB.
+ * One way to use that framebuffer is to load a secondary instance of
+ * LK with the downstream DTB appended and then, only from there, load
+ * mainline Linux.
+ */
+&cont_splash_mem {
+ reg = <0 0x3401000 0 0x2200000>;
+};
+
+&pmi8994_spmi_regulators {
+ /*
+ * Yeah, this one *is* managed by RPMPD, but also needs
+ * to be hacked up as a-o due to the GPU device only accepting a single
+ * power domain.. which still isn't enough and forces us to bind
+ * OXILI_CX and OXILI_GX together!
+ */
+ vdd_gfx: s2@1700 {
+ reg = <0x1700 0x100>;
+ regulator-name = "VDD_GFX";
+ regulator-min-microvolt = <980000>;
+ regulator-max-microvolt = <980000>;
+
+ /* hack until we rig up the gpu consumer */
+ regulator-always-on;
+ };
+};
+
&rpm_requests {
pm8994_regulators: pm8994-regulators {
compatible = "qcom,rpm-pm8994-regulators";
- vdd_l1-supply = <&pm8994_s1>;
- vdd_l2_26_28-supply = <&pm8994_s3>;
- vdd_l3_11-supply = <&pm8994_s3>;
- vdd_l4_27_31-supply = <&pm8994_s3>;
- vdd_l5_7-supply = <&pm8994_s3>;
- vdd_l6_12_32-supply = <&pm8994_s5>;
- vdd_l8_16_30-supply = <&vreg_vph_pwr>;
- vdd_l9_10_18_22-supply = <&vreg_vph_pwr>;
- vdd_l13_19_23_24-supply = <&vreg_vph_pwr>;
- vdd_l14_15-supply = <&pm8994_s5>;
- vdd_l17_29-supply = <&vreg_vph_pwr>;
- vdd_l20_21-supply = <&vreg_vph_pwr>;
- vdd_l25-supply = <&pm8994_s5>;
- vdd_lvs1_2 = <&pm8994_s4>;
-
- pm8994_s1: s1 {};
- pm8994_s2: s2 {};
- pm8994_s3: s3 {};
- pm8994_s4: s4 {};
- pm8994_s5: s5 {};
- pm8994_s6: s6 {};
- pm8994_s7: s7 {};
-
- pm8994_l1: l1 {};
- pm8994_l2: l2 {};
- pm8994_l3: l3 {};
- pm8994_l4: l4 {};
- pm8994_l6: l6 {};
- pm8994_l8: l8 {};
- pm8994_l9: l9 {};
- pm8994_l10: l10 {};
- pm8994_l11: l11 {};
- pm8994_l12: l12 {};
- pm8994_l13: l13 {};
- pm8994_l14: l14 {};
- pm8994_l15: l15 {};
- pm8994_l16: l16 {};
- pm8994_l17: l17 {};
- pm8994_l18: l18 {};
- pm8994_l19: l19 {};
- pm8994_l20: l20 {};
- pm8994_l21: l21 {};
- pm8994_l22: l22 {};
- pm8994_l23: l23 {};
- pm8994_l24: l24 {};
- pm8994_l25: l25 {};
- pm8994_l26: l26 {};
- pm8994_l27: l27 {};
- pm8994_l28: l28 {};
- pm8994_l29: l29 {};
- pm8994_l30: l30 {};
- pm8994_l31: l31 {};
- pm8994_l32: l32 {};
+
+ vdd_s1-supply = <&vph_pwr>;
+ vdd_s2-supply = <&vph_pwr>;
+ vdd_s3-supply = <&vph_pwr>;
+ vdd_s4-supply = <&vph_pwr>;
+ vdd_s5-supply = <&vph_pwr>;
+ vdd_s6-supply = <&vph_pwr>;
+ vdd_s7-supply = <&vph_pwr>;
+ vdd_s8-supply = <&vph_pwr>;
+ vdd_s9-supply = <&vph_pwr>;
+ vdd_s10-supply = <&vph_pwr>;
+ vdd_s11-supply = <&vph_pwr>;
+ vdd_s12-supply = <&vph_pwr>;
+ vdd_l1-supply = <&pmi8994_s1>;
+ vdd_l2_l26_l28-supply = <&pm8994_s3>;
+ vdd_l3_l11-supply = <&pm8994_s3>;
+ vdd_l4_l27_l31-supply = <&pm8994_s3>;
+ vdd_l5_l7-supply = <&pm8994_s5>;
+ vdd_l6_l12_l32-supply = <&pm8994_s5>;
+ vdd_l8_l16_l30-supply = <&vph_pwr>;
+ vdd_l9_l10_l18_l22-supply = <&pmi8994_bby>;
+ vdd_l13_l19_l23_l24-supply = <&pmi8994_bby>;
+ vdd_l14_l15-supply = <&pm8994_s5>;
+ vdd_l17_l29-supply = <&pmi8994_bby>;
+ vdd_l20_l21-supply = <&pmi8994_bby>;
+ vdd_l25-supply = <&pm8994_s3>;
+ vdd_lvs1_lvs2-supply = <&pm8994_s4>;
+
+ /* S1, S2, S6 and S12 are managed by RPMPD */
+
+ pm8994_s3: s3 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ };
+
+ pm8994_s4: s4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-allow-set-load;
+ regulator-always-on;
+ regulator-system-load = <325000>;
+ };
+
+ pm8994_s5: s5 {
+ regulator-min-microvolt = <2150000>;
+ regulator-max-microvolt = <2150000>;
+ };
+
+ pm8994_s7: s7 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ /*
+ * S8 - SPMI-managed VDD_APC0
+ * S9, S10 and S11 (the main one) - SPMI-managed VDD_APC1
+ */
+
+ pm8994_l1: l1 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ pm8994_l2: l2 {
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-allow-set-load;
+ regulator-system-load = <10000>;
+ };
+
+ pm8994_l3: l3 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ };
+
+ pm8994_l4: l4 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ /* L5 is inaccessible from RPM */
+
+ pm8994_l6: l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ /* L7 is inaccessible from RPM */
+
+ pm8994_l8: l8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8994_l9: l9 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8994_l10: l10 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8994_l11: l11 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8994_l12: l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-allow-set-load;
+ regulator-system-load = <10000>;
+ };
+
+ pm8994_l13: l13 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8994_l14: l14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-allow-set-load;
+ regulator-system-load = <10000>;
+ };
+
+ pm8994_l15: l15 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8994_l16: l16 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ };
+
+ pm8994_l17: l17 {
+ regulator-min-microvolt = <2200000>;
+ regulator-max-microvolt = <2200000>;
+ };
+
+ pm8994_l18: l18 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ };
+
+ pm8994_l19: l19 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ pm8994_l20: l20 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-allow-set-load;
+ regulator-system-load = <570000>;
+ };
+
+ pm8994_l21: l21 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-always-on;
+ regulator-allow-set-load;
+ regulator-system-load = <800000>;
+ };
+
+ pm8994_l22: l22 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ pm8994_l23: l23 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ pm8994_l24: l24 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3150000>;
+ };
+
+ pm8994_l25: l25 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ pm8994_l26: l26 {
+ regulator-min-microvolt = <987500>;
+ regulator-max-microvolt = <987500>;
+ };
+
+ pm8994_l27: l27 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8994_l28: l28 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-allow-set-load;
+ regulator-system-load = <10000>;
+ };
+
+ pm8994_l29: l29 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ };
+
+ pm8994_l30: l30 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8994_l31: l31 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-allow-set-load;
+ regulator-system-load = <10000>;
+ };
+
+ pm8994_l32: l32 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
pm8994_lvs1: lvs1 {};
pm8994_lvs2: lvs2 {};
pmi8994_regulators: pmi8994-regulators {
compatible = "qcom,rpm-pmi8994-regulators";
- pmi8994_s1: s1 {};
- pmi8994_s2: s2 {};
- pmi8994_s3: s3 {};
- pmi8994_bby: boost-bypass {};
+ vdd_s1-supply = <&vph_pwr>;
+ vdd_bst_byp-supply = <&vph_pwr>;
+
+ pmi8994_s1: s1 {
+ regulator-min-microvolt = <1025000>;
+ regulator-max-microvolt = <1025000>;
+ };
+
+ /* S2 & S3 - VDD_GFX */
+
+ pmi8994_bby: boost-bypass {
+ regulator-min-microvolt = <3150000>;
+ regulator-max-microvolt = <3600000>;
+ };
};
};
&sdhc1 {
- /* There is an issue with the eMMC causing permanent
+ /*
+ * There is an issue with the eMMC causing permanent
* damage to the card if a quirk isn't addressed.
* Until it's fixed, disable the MMC so as not to brick
* devices.
*/
status = "disabled";
- /* Downstream pushes 2.95V to the sdhci device,
+ /*
+ * Downstream pushes 2.95V to the sdhci device,
* but upstream driver REALLY wants to make vmmc 1.8v
* cause of the hs400-1_8v mode. MMC works fine without
* that regulator, so let's not use it for now.
* vqmmc-supply = <&pm8994_s4>;
*/
};
+
+&sdhc2 {
+ status = "okay";
+
+ cd-gpios = <&tlmm 100 0>;
+ vmmc-supply = <&pm8994_l21>;
+ vqmmc-supply = <&pm8994_l13>;
+};
+
+&tlmm {
+ ts_int_active: ts-int-active {
+ pins = "gpio42";
+ drive-strength = <2>;
+ bias-disable;
+ input-enable;
+ };
+
+ ts_reset_active: ts-reset-active {
+ pins = "gpio109";
+ drive-strength = <2>;
+ bias-disable;
+ output-low;
+ };
+};
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-msm8994.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
/ {
interrupt-parent = <&intc>;
cpu = <&CPU5>;
};
- core2 {
+ cpu6_map: core2 {
cpu = <&CPU6>;
};
- core3 {
+ cpu7_map: core3 {
cpu = <&CPU7>;
};
};
reg = <0 0 0 0>;
};
+ tcsr_mutex: hwlock {
+ compatible = "qcom,tcsr-mutex";
+ syscon = <&tcsr_mutex_regs 0 0x80>;
+ #hwlock-cells = <1>;
+ };
+
pmu {
compatible = "arm,cortex-a53-pmu";
interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4)| IRQ_TYPE_LEVEL_HIGH)>;
#size-cells = <2>;
ranges;
+ dfps_data_mem: dfps_data_mem@3400000 {
+ reg = <0 0x03400000 0 0x1000>;
+ no-map;
+ };
+
+ cont_splash_mem: memory@3800000 {
+ reg = <0 0x03800000 0 0x2400000>;
+ no-map;
+ };
+
smem_mem: smem_region@6a00000 {
- reg = <0x0 0x6a00000 0x0 0x200000>;
+ reg = <0 0x06a00000 0 0x200000>;
+ no-map;
+ };
+
+ mpss_mem: memory@7000000 {
+ reg = <0 0x07000000 0 0x5a00000>;
+ no-map;
+ };
+
+ peripheral_region: memory@ca00000 {
+ reg = <0 0x0ca00000 0 0x1f00000>;
+ no-map;
+ };
+
+ rmtfs_mem: memory@c6400000 {
+ compatible = "qcom,rmtfs-mem";
+ reg = <0 0xc6400000 0 0x180000>;
+ no-map;
+
+ qcom,client-id = <1>;
+ };
+
+ mba_mem: memory@c6700000 {
+ reg = <0 0xc6700000 0 0x100000>;
+ no-map;
+ };
+
+ audio_mem: memory@c7000000 {
+ reg = <0 0xc7000000 0 0x800000>;
+ no-map;
+ };
+
+ adsp_mem: memory@c9400000 {
+ reg = <0 0xc9400000 0 0x3f00000>;
no-map;
};
};
compatible = "qcom,rpmcc-msm8994";
#clock-cells = <1>;
};
+
+ rpmpd: power-controller {
+ compatible = "qcom,msm8994-rpmpd";
+ #power-domain-cells = <1>;
+ operating-points-v2 = <&rpmpd_opp_table>;
+
+ rpmpd_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ rpmpd_opp_ret: opp1 {
+ opp-level = <1>;
+ };
+ rpmpd_opp_svs_krait: opp2 {
+ opp-level = <2>;
+ };
+ rpmpd_opp_svs_soc: opp3 {
+ opp-level = <3>;
+ };
+ rpmpd_opp_nom: opp4 {
+ opp-level = <4>;
+ };
+ rpmpd_opp_turbo: opp5 {
+ opp-level = <5>;
+ };
+ rpmpd_opp_super_turbo: opp6 {
+ opp-level = <6>;
+ };
+ };
+ };
};
};
};
hwlocks = <&tcsr_mutex 3>;
};
+ smp2p-lpass {
+ compatible = "qcom,smp2p";
+ qcom,smem = <443>, <429>;
+
+ interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,ipc = <&apcs 8 10>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <2>;
+
+ adsp_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ adsp_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-modem {
+ compatible = "qcom,smp2p";
+ qcom,smem = <435>, <428>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,ipc = <&apcs 8 14>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <1>;
+
+ modem_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ modem_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
soc: soc {
#address-cells = <1>;
status = "disabled";
};
- blsp_i2c1: i2c@f9923000 {
+ blsp1_i2c1: i2c@f9923000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0xf9923000 0x500>;
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
<&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>;
clock-names = "iface", "core";
clock-frequency = <400000>;
+ dmas = <&blsp1_dma 12>, <&blsp1_dma 13>;
+ dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c1_default>;
pinctrl-1 = <&i2c1_sleep>;
status = "disabled";
};
- blsp_spi0: spi@f9923000 {
+ blsp1_spi1: spi@f9923000 {
compatible = "qcom,spi-qup-v2.2.1";
reg = <0xf9923000 0x500>;
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&blsp1_dma 12>, <&blsp1_dma 13>;
dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp1_spi0_default>;
- pinctrl-1 = <&blsp1_spi0_sleep>;
+ pinctrl-0 = <&blsp1_spi1_default>;
+ pinctrl-1 = <&blsp1_spi1_sleep>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
- blsp_i2c2: i2c@f9924000 {
+ blsp1_i2c2: i2c@f9924000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0xf9924000 0x500>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_AHB_CLK>,
<&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
clock-names = "iface", "core";
- clock-frequency = <355000>;
+ clock-frequency = <400000>;
dmas = <&blsp1_dma 14>, <&blsp1_dma 15>;
dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
/* I2C3 doesn't exist */
- blsp_i2c4: i2c@f9926000 {
+ blsp1_i2c4: i2c@f9926000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0xf9926000 0x500>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_AHB_CLK>,
<&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>;
clock-names = "iface", "core";
- clock-frequency = <355000>;
+ clock-frequency = <400000>;
+ dmas = <&blsp1_dma 18>, <&blsp1_dma 19>;
+ dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c4_default>;
pinctrl-1 = <&i2c4_sleep>;
status = "disabled";
};
- blsp2_dma: dma-controller@f9944000 {
- compatible = "qcom,bam-v1.7.0";
- reg = <0xf9944000 0x19000>;
- interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP2_AHB_CLK>;
- clock-names = "bam_clk";
- #dma-cells = <1>;
- qcom,ee = <0>;
- qcom,controlled-remotely;
- num-channels = <18>;
- qcom,num-ees = <4>;
+ blsp1_i2c5: i2c@f9927000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0xf9927000 0x500>;
+ interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+ <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>;
+ clock-names = "iface", "core";
+ clock-frequency = <400000>;
+ dmas = <&blsp2_dma 20>, <&blsp2_dma 21>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c5_default>;
+ pinctrl-1 = <&i2c5_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
};
- /* According to downstream kernels, i2c6
- * comes before i2c5 address-wise...
- */
-
- blsp_i2c6: i2c@f9928000 {
+ blsp1_i2c6: i2c@f9928000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0xf9928000 0x500>;
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_AHB_CLK>,
<&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>;
clock-names = "iface", "core";
- clock-frequency = <355000>;
+ clock-frequency = <400000>;
dmas = <&blsp1_dma 22>, <&blsp1_dma 23>;
dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
status = "disabled";
};
+ blsp2_dma: dma-controller@f9944000 {
+ compatible = "qcom,bam-v1.7.0";
+ reg = <0xf9944000 0x19000>;
+ interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP2_AHB_CLK>;
+ clock-names = "bam_clk";
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+ qcom,controlled-remotely;
+ num-channels = <18>;
+ qcom,num-ees = <4>;
+ };
+
blsp2_uart2: serial@f995e000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0xf995e000 0x1000>;
- interrupts = <GIC_SPI 146 IRQ_TYPE_EDGE_FALLING>;
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "iface";
clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>,
<&gcc GCC_BLSP2_AHB_CLK>;
status = "disabled";
};
- blsp_i2c5: i2c@f9967000 {
+ blsp2_i2c1: i2c@f9963000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0xf9963000 0x500>;
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP2_AHB_CLK>,
+ <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>;
+ clock-names = "iface", "core";
+ clock-frequency = <400000>;
+ dmas = <&blsp2_dma 12>, <&blsp2_dma 13>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c7_default>;
+ pinctrl-1 = <&i2c7_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp2_spi4: spi@f9966000 {
+ compatible = "qcom,spi-qup-v2.2.1";
+ reg = <0xf9966000 0x500>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP2_QUP4_SPI_APPS_CLK>,
+ <&gcc GCC_BLSP2_AHB_CLK>;
+ clock-names = "core", "iface";
+ spi-max-frequency = <19200000>;
+ dmas = <&blsp2_dma 18>, <&blsp2_dma 19>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp2_spi10_default>;
+ pinctrl-1 = <&blsp2_spi10_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp2_i2c5: i2c@f9967000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0xf9967000 0x500>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&blsp2_dma 20>, <&blsp2_dma 21>;
dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&i2c5_default>;
- pinctrl-1 = <&i2c5_sleep>;
+ pinctrl-0 = <&i2c11_default>;
+ pinctrl-1 = <&i2c11_sleep>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
blsp2_uart2_default: blsp2-uart2-default {
function = "blsp_uart8";
- pins = "gpio45", "gpio46";
- drive-strength = <2>;
+ pins = "gpio45", "gpio46",
+ "gpio47", "gpio48";
+ drive-strength = <16>;
bias-disable;
};
blsp2_uart2_sleep: blsp2-uart2-sleep {
function = "gpio";
- pins = "gpio45", "gpio46";
+ pins = "gpio45", "gpio46",
+ "gpio47", "gpio48";
drive-strength = <2>;
- bias-pull-down;
+ bias-disable;
};
i2c1_default: i2c1-default {
bias-disable;
};
- blsp1_spi0_default: blsp1-spi0-default {
+ i2c7_default: i2c7-default {
+ function = "blsp_i2c7";
+ pins = "gpio44", "gpio43";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ i2c7_sleep: i2c7-sleep {
+ function = "gpio";
+ pins = "gpio44", "gpio43";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ blsp2_spi10_default: blsp2-spi10-default {
+ default {
+ function = "blsp_spi10";
+ pins = "gpio53", "gpio54", "gpio55";
+ drive-strength = <10>;
+ bias-pull-down;
+ };
+ cs {
+ function = "gpio";
+ pins = "gpio55";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ blsp2_spi10_sleep: blsp2-spi10-sleep {
+ pins = "gpio53", "gpio54", "gpio55";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ i2c11_default: i2c11-default {
+ function = "blsp_i2c11";
+ pins = "gpio83", "gpio84";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ i2c11_sleep: i2c11-sleep {
+ function = "gpio";
+ pins = "gpio83", "gpio84";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ blsp1_spi1_default: blsp1-spi1-default {
default {
function = "blsp_spi1";
pins = "gpio0", "gpio1", "gpio3";
};
};
- blsp1_spi0_sleep: blsp1-spi0-sleep {
+ blsp1_spi1_sleep: blsp1-spi1-sleep {
pins = "gpio0", "gpio1", "gpio3";
drive-strength = <2>;
bias-disable;
};
};
- tcsr_mutex: hwlock {
- compatible = "qcom,tcsr-mutex";
- syscon = <&tcsr_mutex_regs 0 0x80>;
- #hwlock-cells = <1>;
- };
-
- timer {
+ timer: timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 2 0xff08>,
<GIC_PPI 3 0xff08>,
<GIC_PPI 1 0xff08>;
};
- vreg_vph_pwr: vreg-vph-pwr {
+ vph_pwr: vph-pwr-regulator {
compatible = "regulator-fixed";
- regulator-name = "vph-pwr";
+ regulator-name = "vph_pwr";
regulator-min-microvolt = <3600000>;
regulator-max-microvolt = <3600000>;
ranges = <0x01000000 0x0 0x0c200000 0x0c200000 0x0 0x100000>,
<0x02000000 0x0 0x0c300000 0x0c300000 0x0 0xd00000>;
+ device_type = "pci";
+
interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi";
#interrupt-cells = <1>;
ranges = <0x01000000 0x0 0x0d200000 0x0d200000 0x0 0x100000>,
<0x02000000 0x0 0x0d300000 0x0d300000 0x0 0xd00000>;
+ device_type = "pci";
+
interrupts = <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi";
#interrupt-cells = <1>;
cpu-idle-states = <&BIG_CPU_SLEEP_1>;
};
+&pcie0 {
+ status = "okay";
+};
+
+&pcie_phy {
+ status = "okay";
+};
+
&pm8005_lsid1 {
pm8005-regulators {
compatible = "qcom,pm8005-regulators";
pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
};
+&ufshc {
+ status = "okay";
+};
+
+&ufsphy {
+ status = "okay";
+};
+
&usb3 {
status = "okay";
};
// status = "okay";
};
+&pcie0 {
+ status = "okay";
+};
+
+&pcie_phy {
+ status = "okay";
+};
+
&pm8005_lsid1 {
pm8005-regulators {
compatible = "qcom,pm8005-regulators";
};
&ufshc {
+ status = "okay";
vcc-supply = <&vreg_l20a_2p95>;
vccq-supply = <&vreg_l26a_1p2>;
vccq2-supply = <&vreg_s4a_1p8>;
};
&ufsphy {
+ status = "okay";
vdda-phy-supply = <&vreg_l1a_0p875>;
vdda-pll-supply = <&vreg_l2a_1p2>;
vddp-ref-clk-supply = <&vreg_l26a_1p2>;
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/* Copyright (c) 2018, The Linux Foundation. All rights reserved. */
-
-&tlmm {
- sdc2_clk_on: sdc2_clk_on {
- config {
- pins = "sdc2_clk";
- bias-disable; /* NO pull */
- drive-strength = <16>; /* 16 mA */
- };
- };
-
- sdc2_clk_off: sdc2_clk_off {
- config {
- pins = "sdc2_clk";
- bias-disable; /* NO pull */
- drive-strength = <2>; /* 2 mA */
- };
- };
-
- sdc2_cmd_on: sdc2_cmd_on {
- config {
- pins = "sdc2_cmd";
- bias-pull-up; /* pull up */
- drive-strength = <10>; /* 10 mA */
- };
- };
-
- sdc2_cmd_off: sdc2_cmd_off {
- config {
- pins = "sdc2_cmd";
- bias-pull-up; /* pull up */
- drive-strength = <2>; /* 2 mA */
- };
- };
-
- sdc2_data_on: sdc2_data_on {
- config {
- pins = "sdc2_data";
- bias-pull-up; /* pull up */
- drive-strength = <10>; /* 10 mA */
- };
- };
-
- sdc2_data_off: sdc2_data_off {
- config {
- pins = "sdc2_data";
- bias-pull-up; /* pull up */
- drive-strength = <2>; /* 2 mA */
- };
- };
-
- sdc2_cd_on: sdc2_cd_on {
- mux {
- pins = "gpio95";
- function = "gpio";
- };
-
- config {
- pins = "gpio95";
- bias-pull-up; /* pull up */
- drive-strength = <2>; /* 2 mA */
- };
- };
-
- sdc2_cd_off: sdc2_cd_off {
- mux {
- pins = "gpio95";
- function = "gpio";
- };
-
- config {
- pins = "gpio95";
- bias-pull-up; /* pull up */
- drive-strength = <2>; /* 2 mA */
- };
- };
-
- blsp1_uart3_on: blsp1_uart3_on {
- tx {
- pins = "gpio45";
- function = "blsp_uart3_a";
- drive-strength = <2>;
- bias-disable;
- };
-
- rx {
- pins = "gpio46";
- function = "blsp_uart3_a";
- drive-strength = <2>;
- bias-disable;
- };
-
- cts {
- pins = "gpio47";
- function = "blsp_uart3_a";
- drive-strength = <2>;
- bias-disable;
- };
-
- rfr {
- pins = "gpio48";
- function = "blsp_uart3_a";
- drive-strength = <2>;
- bias-disable;
- };
- };
-};
compatible = "qcom,kryo280";
reg = <0x0 0x0>;
enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
next-level-cache = <&L2_0>;
L2_0: l2-cache {
compatible = "qcom,kryo280";
reg = <0x0 0x1>;
enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
next-level-cache = <&L2_0>;
L1_I_1: l1-icache {
compatible = "qcom,kryo280";
reg = <0x0 0x2>;
enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
next-level-cache = <&L2_0>;
L1_I_2: l1-icache {
compatible = "qcom,kryo280";
reg = <0x0 0x3>;
enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
next-level-cache = <&L2_0>;
L1_I_3: l1-icache {
compatible = "qcom,kryo280";
reg = <0x0 0x100>;
enable-method = "psci";
+ capacity-dmips-mhz = <1536>;
cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
next-level-cache = <&L2_1>;
L2_1: l2-cache {
compatible = "qcom,kryo280";
reg = <0x0 0x101>;
enable-method = "psci";
+ capacity-dmips-mhz = <1536>;
cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
next-level-cache = <&L2_1>;
L1_I_101: l1-icache {
compatible = "qcom,kryo280";
reg = <0x0 0x102>;
enable-method = "psci";
+ capacity-dmips-mhz = <1536>;
cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
next-level-cache = <&L2_1>;
L1_I_102: l1-icache {
compatible = "qcom,kryo280";
reg = <0x0 0x103>;
enable-method = "psci";
+ capacity-dmips-mhz = <1536>;
cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
next-level-cache = <&L2_1>;
L1_I_103: l1-icache {
compatible = "operating-points-v2";
rpmpd_opp_ret: opp1 {
- opp-level = <16>;
+ opp-level = <RPM_SMD_LEVEL_RETENTION>;
};
rpmpd_opp_ret_plus: opp2 {
- opp-level = <32>;
+ opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
};
rpmpd_opp_min_svs: opp3 {
- opp-level = <48>;
+ opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
};
rpmpd_opp_low_svs: opp4 {
- opp-level = <64>;
+ opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
};
rpmpd_opp_svs: opp5 {
- opp-level = <128>;
+ opp-level = <RPM_SMD_LEVEL_SVS>;
};
rpmpd_opp_svs_plus: opp6 {
- opp-level = <192>;
+ opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
};
rpmpd_opp_nom: opp7 {
- opp-level = <256>;
+ opp-level = <RPM_SMD_LEVEL_NOM>;
};
rpmpd_opp_nom_plus: opp8 {
- opp-level = <320>;
+ opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
};
rpmpd_opp_turbo: opp9 {
- opp-level = <384>;
+ opp-level = <RPM_SMD_LEVEL_TURBO>;
};
rpmpd_opp_turbo_plus: opp10 {
- opp-level = <512>;
+ opp-level = <RPM_SMD_LEVEL_BINNING>;
};
};
};
num-lanes = <1>;
phys = <&pciephy>;
phy-names = "pciephy";
+ status = "disabled";
ranges = <0x01000000 0x0 0x1b200000 0x1b200000 0x0 0x100000>,
<0x02000000 0x0 0x1b300000 0x1b300000 0x0 0xd00000>;
perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
};
- phy@1c06000 {
+ pcie_phy: phy@1c06000 {
compatible = "qcom,msm8998-qmp-pcie-phy";
reg = <0x01c06000 0x18c>;
#address-cells = <1>;
#size-cells = <1>;
+ status = "disabled";
ranges;
clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
phy-names = "ufsphy";
lanes-per-direction = <2>;
power-domains = <&gcc UFS_GDSC>;
+ status = "disabled";
#reset-cells = <1>;
clock-names =
reg = <0x01da7000 0x18c>;
#address-cells = <1>;
#size-cells = <1>;
+ status = "disabled";
ranges;
clock-names =
#gpio-cells = <0x2>;
interrupt-controller;
#interrupt-cells = <0x2>;
+
+ sdc2_clk_on: sdc2_clk_on {
+ config {
+ pins = "sdc2_clk";
+ bias-disable;
+ drive-strength = <16>;
+ };
+ };
+
+ sdc2_clk_off: sdc2_clk_off {
+ config {
+ pins = "sdc2_clk";
+ bias-disable;
+ drive-strength = <2>;
+ };
+ };
+
+ sdc2_cmd_on: sdc2_cmd_on {
+ config {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+ };
+
+ sdc2_cmd_off: sdc2_cmd_off {
+ config {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ };
+
+ sdc2_data_on: sdc2_data_on {
+ config {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+ };
+
+ sdc2_data_off: sdc2_data_off {
+ config {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ };
+
+ sdc2_cd_on: sdc2_cd_on {
+ mux {
+ pins = "gpio95";
+ function = "gpio";
+ };
+
+ config {
+ pins = "gpio95";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ };
+
+ sdc2_cd_off: sdc2_cd_off {
+ mux {
+ pins = "gpio95";
+ function = "gpio";
+ };
+
+ config {
+ pins = "gpio95";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ };
+
+ blsp1_uart3_on: blsp1_uart3_on {
+ tx {
+ pins = "gpio45";
+ function = "blsp_uart3_a";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ rx {
+ pins = "gpio46";
+ function = "blsp_uart3_a";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ cts {
+ pins = "gpio47";
+ function = "blsp_uart3_a";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ rfr {
+ pins = "gpio48";
+ function = "blsp_uart3_a";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ blsp1_i2c1_default: blsp1-i2c1-default {
+ pins = "gpio2", "gpio3";
+ function = "blsp_i2c1";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ blsp1_i2c1_sleep: blsp1-i2c1-sleep {
+ pins = "gpio2", "gpio3";
+ function = "blsp_i2c1";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ blsp1_i2c2_default: blsp1-i2c2-default {
+ pins = "gpio32", "gpio33";
+ function = "blsp_i2c2";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ blsp1_i2c2_sleep: blsp1-i2c2-sleep {
+ pins = "gpio32", "gpio33";
+ function = "blsp_i2c2";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ blsp1_i2c3_default: blsp1-i2c3-default {
+ pins = "gpio47", "gpio48";
+ function = "blsp_i2c3";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ blsp1_i2c3_sleep: blsp1-i2c3-sleep {
+ pins = "gpio47", "gpio48";
+ function = "blsp_i2c3";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ blsp1_i2c4_default: blsp1-i2c4-default {
+ pins = "gpio10", "gpio11";
+ function = "blsp_i2c4";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ blsp1_i2c4_sleep: blsp1-i2c4-sleep {
+ pins = "gpio10", "gpio11";
+ function = "blsp_i2c4";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ blsp1_i2c5_default: blsp1-i2c5-default {
+ pins = "gpio87", "gpio88";
+ function = "blsp_i2c5";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ blsp1_i2c5_sleep: blsp1-i2c5-sleep {
+ pins = "gpio87", "gpio88";
+ function = "blsp_i2c5";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ blsp1_i2c6_default: blsp1-i2c6-default {
+ pins = "gpio43", "gpio44";
+ function = "blsp_i2c6";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ blsp1_i2c6_sleep: blsp1-i2c6-sleep {
+ pins = "gpio43", "gpio44";
+ function = "blsp_i2c6";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ /* 6 interfaces per QUP, BLSP2 indexes are numbered (n)+6 */
+ blsp2_i2c1_default: blsp2-i2c1-default {
+ pins = "gpio55", "gpio56";
+ function = "blsp_i2c7";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ blsp2_i2c1_sleep: blsp2-i2c1-sleep {
+ pins = "gpio55", "gpio56";
+ function = "blsp_i2c7";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ blsp2_i2c2_default: blsp2-i2c2-default {
+ pins = "gpio6", "gpio7";
+ function = "blsp_i2c8";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ blsp2_i2c2_sleep: blsp2-i2c2-sleep {
+ pins = "gpio6", "gpio7";
+ function = "blsp_i2c8";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ blsp2_i2c3_default: blsp2-i2c3-default {
+ pins = "gpio51", "gpio52";
+ function = "blsp_i2c9";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ blsp2_i2c3_sleep: blsp2-i2c3-sleep {
+ pins = "gpio51", "gpio52";
+ function = "blsp_i2c9";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ blsp2_i2c4_default: blsp2-i2c4-default {
+ pins = "gpio67", "gpio68";
+ function = "blsp_i2c10";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ blsp2_i2c4_sleep: blsp2-i2c4-sleep {
+ pins = "gpio67", "gpio68";
+ function = "blsp_i2c10";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ blsp2_i2c5_default: blsp2-i2c5-default {
+ pins = "gpio60", "gpio61";
+ function = "blsp_i2c11";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ blsp2_i2c5_sleep: blsp2-i2c5-sleep {
+ pins = "gpio60", "gpio61";
+ function = "blsp_i2c11";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ blsp2_i2c6_default: blsp2-i2c6-default {
+ pins = "gpio83", "gpio84";
+ function = "blsp_i2c12";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ blsp2_i2c6_sleep: blsp2-i2c6-sleep {
+ pins = "gpio83", "gpio84";
+ function = "blsp_i2c12";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
};
remoteproc_mss: remoteproc@4080000 {
clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
+ dmas = <&blsp1_dma 6>, <&blsp1_dma 7>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp1_i2c1_default>;
+ pinctrl-1 = <&blsp1_i2c1_sleep>;
clock-frequency = <400000>;
status = "disabled";
clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
+ dmas = <&blsp1_dma 8>, <&blsp1_dma 9>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp1_i2c2_default>;
+ pinctrl-1 = <&blsp1_i2c2_sleep>;
clock-frequency = <400000>;
status = "disabled";
clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
+ dmas = <&blsp1_dma 10>, <&blsp1_dma 11>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp1_i2c3_default>;
+ pinctrl-1 = <&blsp1_i2c3_sleep>;
clock-frequency = <400000>;
status = "disabled";
clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
+ dmas = <&blsp1_dma 12>, <&blsp1_dma 13>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp1_i2c4_default>;
+ pinctrl-1 = <&blsp1_i2c4_sleep>;
clock-frequency = <400000>;
status = "disabled";
clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
+ dmas = <&blsp1_dma 14>, <&blsp1_dma 15>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp1_i2c5_default>;
+ pinctrl-1 = <&blsp1_i2c5_sleep>;
clock-frequency = <400000>;
status = "disabled";
clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
+ dmas = <&blsp1_dma 16>, <&blsp1_dma 17>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp1_i2c6_default>;
+ pinctrl-1 = <&blsp1_i2c6_sleep>;
clock-frequency = <400000>;
status = "disabled";
#size-cells = <0>;
};
+ blsp2_dma: dma@c184000 {
+ compatible = "qcom,bam-v1.7.0";
+ reg = <0x0c184000 0x25000>;
+ interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP2_AHB_CLK>;
+ clock-names = "bam_clk";
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+ qcom,controlled-remotely;
+ num-channels = <18>;
+ qcom,num-ees = <4>;
+ };
+
blsp2_uart1: serial@c1b0000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x0c1b0000 0x1000>;
status = "disabled";
};
- blsp2_i2c0: i2c@c1b5000 {
+ blsp2_i2c1: i2c@c1b5000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x0c1b5000 0x600>;
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>,
<&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
+ dmas = <&blsp2_dma 6>, <&blsp2_dma 7>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp2_i2c1_default>;
+ pinctrl-1 = <&blsp2_i2c1_sleep>;
clock-frequency = <400000>;
status = "disabled";
#size-cells = <0>;
};
- blsp2_i2c1: i2c@c1b6000 {
+ blsp2_i2c2: i2c@c1b6000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x0c1b6000 0x600>;
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>,
<&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
+ dmas = <&blsp2_dma 8>, <&blsp2_dma 9>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp2_i2c2_default>;
+ pinctrl-1 = <&blsp2_i2c2_sleep>;
clock-frequency = <400000>;
status = "disabled";
#size-cells = <0>;
};
- blsp2_i2c2: i2c@c1b7000 {
+ blsp2_i2c3: i2c@c1b7000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x0c1b7000 0x600>;
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>,
<&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
+ dmas = <&blsp2_dma 10>, <&blsp2_dma 11>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp2_i2c3_default>;
+ pinctrl-1 = <&blsp2_i2c3_sleep>;
clock-frequency = <400000>;
status = "disabled";
#size-cells = <0>;
};
- blsp2_i2c3: i2c@c1b8000 {
+ blsp2_i2c4: i2c@c1b8000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x0c1b8000 0x600>;
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>,
<&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
+ dmas = <&blsp2_dma 12>, <&blsp2_dma 13>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp2_i2c4_default>;
+ pinctrl-1 = <&blsp2_i2c4_sleep>;
clock-frequency = <400000>;
status = "disabled";
#size-cells = <0>;
};
- blsp2_i2c4: i2c@c1b9000 {
+ blsp2_i2c5: i2c@c1b9000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x0c1b9000 0x600>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>,
<&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
+ dmas = <&blsp2_dma 14>, <&blsp2_dma 15>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp2_i2c5_default>;
+ pinctrl-1 = <&blsp2_i2c5_sleep>;
clock-frequency = <400000>;
status = "disabled";
#size-cells = <0>;
};
- blsp2_i2c5: i2c@c1ba000 {
+ blsp2_i2c6: i2c@c1ba000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x0c1ba000 0x600>;
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>,
<&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
+ dmas = <&blsp2_dma 16>, <&blsp2_dma 17>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp2_i2c6_default>;
+ pinctrl-1 = <&blsp2_i2c6_sleep>;
clock-frequency = <400000>;
status = "disabled";
};
};
};
-
-#include "msm8998-pins.dtsi"
/ {
thermal-zones {
- pm8150 {
+ pm8150-thermal {
polling-delay-passive = <100>;
polling-delay = <0>;
};
};
+ pm8150_adc_tm: adc-tm@3500 {
+ compatible = "qcom,spmi-adc-tm5";
+ reg = <0x3500>;
+ interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
+ #thermal-sensor-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
pm8150_rtc: rtc@6000 {
compatible = "qcom,pm8941-rtc";
reg = <0x6000>;
/ {
thermal-zones {
- pm8150b {
+ pm8150b-thermal {
polling-delay-passive = <100>;
polling-delay = <0>;
};
};
+ pm8150b_adc_tm: adc-tm@3500 {
+ compatible = "qcom,spmi-adc-tm5";
+ reg = <0x3500>;
+ interrupts = <0x2 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
+ #thermal-sensor-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
pm8150b_gpios: gpio@c000 {
compatible = "qcom,pm8150b-gpio";
reg = <0xc000>;
/ {
thermal-zones {
- pm8150l {
+ pm8150l-thermal {
polling-delay-passive = <100>;
polling-delay = <0>;
};
};
+ pm8150l_adc_tm: adc-tm@3500 {
+ compatible = "qcom,spmi-adc-tm5";
+ reg = <0x3500>;
+ interrupts = <0x4 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
+ #thermal-sensor-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
pm8150l_gpios: gpio@c000 {
compatible = "qcom,pm8150l-gpio";
reg = <0xc000>;
/ {
thermal-zones {
- pm8994 {
+ pm8994-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
};
- pon@800 {
+ pm8994_pon: pon@800 {
compatible = "qcom,pm8916-pon";
reg = <0x800>;
/ {
thermal-zones {
- pm8998 {
+ pm8998-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
compatible = "qcom,pmi8998-lab-ibb";
ibb: ibb {
- interrupts = <0x3 0xdc 0x2 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <0x3 0xdc 0x2 IRQ_TYPE_EDGE_RISING>,
+ <0x3 0xdc 0x0 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "sc-err", "ocp";
};
lab: lab {
- interrupts = <0x3 0xde 0x0 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <0x3 0xde 0x1 IRQ_TYPE_EDGE_RISING>,
+ <0x3 0xde 0x0 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "sc-err", "ocp";
};
};
};
/ {
thermal-zones {
- pms405 {
+ pms405-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
#include "sm8250.dtsi"
#include "pm8150.dtsi"
#include "pm8150b.dtsi"
regulator-always-on;
};
+ hdmi-out {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con: endpoint {
+ remote-endpoint = <<9611_out>;
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";
};
+ lt9611_1v2: lt9611-vdd12-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "LT9611_1V2";
+
+ vin-supply = <&vdc_3v3>;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ lt9611_3v3: lt9611-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "LT9611_3V3";
+
+ vin-supply = <&vdc_3v3>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ thermal-zones {
+ conn-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&pm8150b_adc_tm 0>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ pm8150l-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&pm8150l_adc_tm 1>;
+
+ trips {
+ active-config0 {
+ temperature = <50000>;
+ hysteresis = <4000>;
+ type = "passive";
+ };
+ };
+ };
+
+ skin-msm-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&pm8150l_adc_tm 0>;
+
+ trips {
+ active-config0 {
+ temperature = <50000>;
+ hysteresis = <4000>;
+ type = "passive";
+ };
+ };
+ };
+
+ wifi-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&pm8150_adc_tm 1>;
+
+ trips {
+ active-config0 {
+ temperature = <52000>;
+ hysteresis = <4000>;
+ type = "passive";
+ };
+ };
+ };
+
+ xo-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&pm8150_adc_tm 0>;
+
+ trips {
+ active-config0 {
+ temperature = <50000>;
+ hysteresis = <4000>;
+ type = "passive";
+ };
+ };
+ };
+ };
+
vbat: vbat-regulator {
compatible = "regulator-fixed";
regulator-name = "VBAT";
vdc_3v3: vdc-3v3-regulator {
compatible = "regulator-fixed";
regulator-name = "VDC_3V3";
- vin-supply = <&dc12v>;
+ vin-supply = <&vreg_l11c_3p3>;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
};
+&adsp {
+ status = "okay";
+ firmware-name = "qcom/sm8250/adsp.mbn";
+};
+
&apps_rsc {
pm8009-rpmh-regulators {
compatible = "qcom,pm8009-rpmh-regulators";
};
};
+&cdsp {
+ status = "okay";
+ firmware-name = "qcom/sm8250/cdsp.mbn";
+};
+
+&dsi0 {
+ status = "okay";
+ vdda-supply = <&vreg_l9a_1p2>;
+
+#if 0
+ qcom,dual-dsi-mode;
+ qcom,master-dsi;
+#endif
+
+ ports {
+ port@1 {
+ endpoint {
+ remote-endpoint = <<9611_a>;
+ data-lanes = <0 1 2 3>;
+ };
+ };
+ };
+};
+
+&dsi0_phy {
+ status = "okay";
+ vdds-supply = <&vreg_l5a_0p88>;
+};
+
+&gpu {
+ zap-shader {
+ memory-region = <&gpu_mem>;
+ firmware-name = "qcom/sm8250/a650_zap.mbn";
+ };
+};
+
/* LS-I2C0 */
&i2c4 {
status = "okay";
&i2c5 {
status = "okay";
+ clock-frequency = <400000>;
+
+ lt9611_codec: hdmi-bridge@2b {
+ compatible = "lontium,lt9611uxc";
+ reg = <0x2b>;
+ #sound-dai-cells = <1>;
+
+ interrupts-extended = <&tlmm 63 IRQ_TYPE_EDGE_FALLING>;
+
+ reset-gpios = <&pm8150l_gpios 5 GPIO_ACTIVE_HIGH>;
+
+ vdd-supply = <<9611_1v2>;
+ vcc-supply = <<9611_3v3>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <<9611_irq_pin <9611_rst_pin>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ lt9611_a: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+
+#if 0
+ port@1 {
+ reg = <1>;
+
+ lt9611_b: endpoint {
+ remote-endpoint = <&dsi1_out>;
+ };
+ };
+#endif
+
+ port@2 {
+ reg = <2>;
+
+ lt9611_out: endpoint {
+ remote-endpoint = <&hdmi_con>;
+ };
+ };
+
+ };
+ };
};
/* LS-I2C1 */
status = "okay";
};
+&mdss {
+ status = "okay";
+};
+
+&mdss_mdp {
+ status = "okay";
+};
+
+&pm8150_adc {
+ xo-therm@4c {
+ reg = <ADC5_XO_THERM_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ };
+
+ wifi-therm@4e {
+ reg = <ADC5_AMUX_THM2_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ };
+};
+
+&pm8150_adc_tm {
+ status = "okay";
+
+ xo-therm@0 {
+ reg = <0>;
+ io-channels = <&pm8150_adc ADC5_XO_THERM_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ wifi-therm@1 {
+ reg = <1>;
+ io-channels = <&pm8150_adc ADC5_AMUX_THM2_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+};
+
+&pcie0 {
+ status = "okay";
+ perst-gpio = <&tlmm 79 GPIO_ACTIVE_LOW>;
+ wake-gpio = <&tlmm 81 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie0_default_state>;
+};
+
+&pcie0_phy {
+ status = "okay";
+ vdda-phy-supply = <&vreg_l5a_0p88>;
+ vdda-pll-supply = <&vreg_l9a_1p2>;
+};
+
+&pcie1 {
+ status = "okay";
+ perst-gpio = <&tlmm 82 GPIO_ACTIVE_LOW>;
+ wake-gpio = <&tlmm 84 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie1_default_state>;
+};
+
+&pcie1_phy {
+ status = "okay";
+ vdda-phy-supply = <&vreg_l5a_0p88>;
+ vdda-pll-supply = <&vreg_l9a_1p2>;
+};
+
+&pcie2 {
+ status = "okay";
+ perst-gpio = <&tlmm 85 GPIO_ACTIVE_LOW>;
+ wake-gpio = <&tlmm 87 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie2_default_state>;
+};
+
+&pcie2_phy {
+ status = "okay";
+ vdda-phy-supply = <&vreg_l5a_0p88>;
+ vdda-pll-supply = <&vreg_l9a_1p2>;
+};
+
&pm8150_gpios {
gpio-reserved-ranges = <1 1>, <3 2>, <7 1>;
gpio-line-names =
"GPIO_10_P"; /* Green LED */
};
+&pm8150b_adc {
+ conn-therm@4f {
+ reg = <ADC5_AMUX_THM3_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ };
+};
+
+&pm8150b_adc_tm {
+ status = "okay";
+
+ conn-therm@0 {
+ reg = <0>;
+ io-channels = <&pm8150b_adc ADC5_AMUX_THM3_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+};
+
&pm8150b_gpios {
gpio-line-names =
"NC",
"NC";
};
+&pm8150l_adc {
+ skin-msm-therm@4e {
+ reg = <ADC5_AMUX_THM2_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ };
+
+ pm8150l-therm@4f {
+ reg = <ADC5_AMUX_THM3_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ };
+};
+
+&pm8150l_adc_tm {
+ status = "okay";
+
+ skin-msm-therm@0 {
+ reg = <0>;
+ io-channels = <&pm8150l_adc ADC5_AMUX_THM2_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ pm8150l-therm@1 {
+ reg = <1>;
+ io-channels = <&pm8150l_adc ADC5_AMUX_THM3_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+};
+
&pm8150l_gpios {
gpio-line-names =
"NC",
"PM_GPIO-B",
"NC",
"PM3003A_MODE";
+
+ lt9611_rst_pin: lt9611-rst-pin {
+ pins = "gpio5";
+ function = "normal";
+
+ output-high;
+ input-disable;
+ power-source = <0>;
+ };
};
&pm8150_rtc {
status = "okay";
};
+&q6afedai {
+ qi2s@16 {
+ reg = <16>;
+ qcom,sd-lines = <0 1 2 3>;
+ };
+};
+
+/* TERT I2S Uses 1 I2S SD Lines for audio on LT9611 HDMI Bridge */
+&q6afedai {
+ qi2s@20 {
+ reg = <20>;
+ qcom,sd-lines = <0>;
+ };
+};
+
+&q6asmdai {
+ dai@0 {
+ reg = <0>;
+ };
+
+ dai@1 {
+ reg = <1>;
+ };
+
+ dai@2 {
+ reg = <2>;
+ };
+};
+
&sdhc_2 {
status = "okay";
pinctrl-names = "default";
vqmmc-supply = <&vreg_l6c_2p96>;
cd-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>;
bus-width = <4>;
- /* there seem to be issues with HS400-1.8V mode, so disable it */
- no-1-8-v;
no-sdio;
no-emmc;
};
+&sound {
+ compatible = "qcom,qrb5165-rb5-sndcard";
+ pinctrl-0 = <&tert_mi2s_active>;
+ pinctrl-names = "default";
+ model = "Qualcomm-RB5-WSA8815-Speakers-DMIC0";
+ audio-routing =
+ "SpkrLeft IN", "WSA_SPK1 OUT",
+ "SpkrRight IN", "WSA_SPK2 OUT",
+ "VA DMIC0", "vdd-micb",
+ "VA DMIC1", "vdd-micb",
+ "MM_DL1", "MultiMedia1 Playback",
+ "MM_DL2", "MultiMedia2 Playback",
+ "MultiMedia3 Capture", "MM_UL3";
+
+ mm1-dai-link {
+ link-name = "MultiMedia1";
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+ };
+ };
+
+ mm2-dai-link {
+ link-name = "MultiMedia2";
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
+ };
+ };
+
+ mm3-dai-link {
+ link-name = "MultiMedia3";
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
+ };
+ };
+
+ hdmi-dai-link {
+ link-name = "HDMI Playback";
+ cpu {
+ sound-dai = <&q6afedai TERTIARY_MI2S_RX>;
+ };
+
+ platform {
+ sound-dai = <&q6routing>;
+ };
+
+ codec {
+ sound-dai = <<9611_codec 0>;
+ };
+ };
+
+ dma-dai-link {
+ link-name = "WSA Playback";
+ cpu {
+ sound-dai = <&q6afedai WSA_CODEC_DMA_RX_0>;
+ };
+
+ platform {
+ sound-dai = <&q6routing>;
+ };
+
+ codec {
+ sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&wsamacro 0>;
+ };
+ };
+
+ va-dai-link {
+ link-name = "VA Capture";
+ cpu {
+ sound-dai = <&q6afedai VA_CODEC_DMA_TX_0>;
+ };
+
+ platform {
+ sound-dai = <&q6routing>;
+ };
+
+ codec {
+ sound-dai = <&vamacro 0>;
+ };
+ };
+};
+
/* CAN */
&spi0 {
status = "okay";
};
};
+&swr0 {
+ left_spkr: wsa8810-left{
+ compatible = "sdw10217211000";
+ reg = <0 3>;
+ powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_HIGH>;
+ #thermal-sensor-cells = <0>;
+ sound-name-prefix = "SpkrLeft";
+ #sound-dai-cells = <0>;
+ };
+
+ right_spkr: wsa8810-right{
+ compatible = "sdw10217211000";
+ reg = <0 4>;
+ powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_HIGH>;
+ #thermal-sensor-cells = <0>;
+ sound-name-prefix = "SpkrRight";
+ #sound-dai-cells = <0>;
+ };
+};
+
&tlmm {
gpio-reserved-ranges = <40 4>;
gpio-line-names =
"HST_WLAN_UART_TX",
"HST_WLAN_UART_RX";
+ lt9611_irq_pin: lt9611-irq {
+ pins = "gpio63";
+ function = "gpio";
+ bias-disable;
+ };
+
+ pcie0_default_state: pcie0-default {
+ clkreq {
+ pins = "gpio80";
+ function = "pci_e0";
+ bias-pull-up;
+ };
+
+ reset-n {
+ pins = "gpio79";
+ function = "gpio";
+
+ drive-strength = <2>;
+ output-low;
+ bias-pull-down;
+ };
+
+ wake-n {
+ pins = "gpio81";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ pcie1_default_state: pcie1-default {
+ clkreq {
+ pins = "gpio83";
+ function = "pci_e1";
+ bias-pull-up;
+ };
+
+ reset-n {
+ pins = "gpio82";
+ function = "gpio";
+
+ drive-strength = <2>;
+ output-low;
+ bias-pull-down;
+ };
+
+ wake-n {
+ pins = "gpio84";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ pcie2_default_state: pcie2-default {
+ clkreq {
+ pins = "gpio86";
+ function = "pci_e2";
+ bias-pull-up;
+ };
+
+ reset-n {
+ pins = "gpio85";
+ function = "gpio";
+
+ drive-strength = <2>;
+ output-low;
+ bias-pull-down;
+ };
+
+ wake-n {
+ pins = "gpio87";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
sdc2_default_state: sdc2-default {
clk {
pins = "sdc2_clk";
cmd {
pins = "sdc2_cmd";
bias-pull-up;
- drive-strength = <16>;
+ drive-strength = <10>;
};
data {
pins = "sdc2_data";
bias-pull-up;
- drive-strength = <16>;
+ drive-strength = <10>;
};
};
vdda-phy-supply = <&vreg_l9a_1p2>;
vdda-pll-supply = <&vreg_l18a_0p92>;
};
+
+&vamacro {
+ pinctrl-0 = <&dmic01_active>;
+ pinctrl-names = "default";
+ vdd-micb-supply = <&vreg_s4a_1p8>;
+ qcom,dmic-sample-rate = <600000>;
+};
regulator-max-microvolt = <1128000>;
};
- /*
- * pp2040_s5a (smps5) and pp1056_s4a (smps4) are just
- * inputs to other rails on AOP-managed PMICs on trogdor.
- * The system is already configured to manage these rails
- * automatically (enable when needed, adjust voltage for
- * headroom) so we won't specify anything here.
- *
- * NOTE: though the rails have a voltage implied by their
- * name, the automatic headroom calculation might not result
- * in them being that voltage. ...and that's OK.
- * Specifically the only point of these rails is to provide
- * an input source for other rails and if we can satisify the
- * needs of those other rails with a lower source voltage then
- * we save power.
- */
-
- pp1200_l1a: ldo1 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- pp1000_l2a: ldo2 {
- regulator-min-microvolt = <944000>;
- regulator-max-microvolt = <1056000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- pp1000_l3a: ldo3 {
- regulator-min-microvolt = <968000>;
- regulator-max-microvolt = <1064000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
vdd_qlink_lv:
vdd_qlink_lv_ck:
vdd_qusb_hs0_core:
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
- pp2700_l5a: ldo5 {
- regulator-min-microvolt = <2704000>;
- regulator-max-microvolt = <2704000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- ebi0_cal:
- ebi1_cal:
- vddio_ck_ebi0:
- vddio_ck_ebi1:
- vddio_ebi0:
- vddq:
- pp600_l6a: ldo6 {
- regulator-min-microvolt = <568000>;
- regulator-max-microvolt = <648000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
vdd_cx_wlan:
pp800_l9a: ldo9 {
regulator-min-microvolt = <488000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
+ /*
+ * On trogdor this needs to match l10a since we use it to
+ * give power to things like SPI flash which communicate back
+ * on lines powered by l10a. Thus we force to 1.8V.
+ */
pp1800_l13a: ldo13 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
- pp2700_l16a: ldo16 {
- regulator-min-microvolt = <2496000>;
- regulator-max-microvolt = <3304000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
vdda_qusb_hs0_3p1:
vdd_pdphy:
pp3100_l17a: ldo17 {
};
pp1800_l1c: ldo1 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <1616000>;
+ regulator-max-microvolt = <1984000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
- ld_pp1800_esim_l4c:
- vddpx_5:
- pp1800_l4c: ldo4 {
- regulator-min-microvolt = <1648000>;
- regulator-max-microvolt = <3304000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vddpx_6:
- pp1800_l5c: ldo5 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
vddpx_2:
ppvar_l6c: ldo6 {
regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3304000>;
+ regulator-max-microvolt = <2952000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
/* PINCTRL - additions to nodes defined in sc7180.dtsi */
+&dp_hot_plug_det {
+ pinconf {
+ pins = "gpio117";
+ bias-disable;
+ };
+};
+
&qspi_cs0 {
pinconf {
pins = "gpio68";
reg = <0x25b 0x1>;
bits = <1 3>;
};
+
+ gpu_speed_bin: gpu_speed_bin@1d2 {
+ reg = <0x1d2 0x2>;
+ bits = <5 8>;
+ };
};
sdhc_1: sdhci@7c4000 {
pins = "gpio117";
function = "dp_hot";
};
-
- pinconf {
- pins = "gpio117";
- bias-disable;
- input-enable;
- };
};
qspi_clk: qspi-clk {
#cooling-cells = <2>;
+ nvmem-cells = <&gpu_speed_bin>;
+ nvmem-cell-names = "speed_bin";
+
interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "gfx-mem";
gpu_opp_table: opp-table {
compatible = "operating-points-v2";
+ opp-825000000 {
+ opp-hz = /bits/ 64 <825000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+ opp-peak-kBps = <8532000>;
+ opp-supported-hw = <0x04>;
+ };
+
opp-800000000 {
opp-hz = /bits/ 64 <800000000>;
opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
opp-peak-kBps = <8532000>;
+ opp-supported-hw = <0x07>;
};
opp-650000000 {
opp-hz = /bits/ 64 <650000000>;
opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
opp-peak-kBps = <7216000>;
+ opp-supported-hw = <0x07>;
};
opp-565000000 {
opp-hz = /bits/ 64 <565000000>;
opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
opp-peak-kBps = <5412000>;
+ opp-supported-hw = <0x07>;
};
opp-430000000 {
opp-hz = /bits/ 64 <430000000>;
opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
opp-peak-kBps = <5412000>;
+ opp-supported-hw = <0x07>;
};
opp-355000000 {
opp-hz = /bits/ 64 <355000000>;
opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
opp-peak-kBps = <3072000>;
+ opp-supported-hw = <0x07>;
};
opp-267000000 {
opp-hz = /bits/ 64 <267000000>;
opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
opp-peak-kBps = <3072000>;
+ opp-supported-hw = <0x07>;
};
opp-180000000 {
opp-hz = /bits/ 64 <180000000>;
opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
opp-peak-kBps = <1804000>;
+ opp-supported-hw = <0x07>;
};
};
};
compatible = "qcom,apss-wdt-sc7180", "qcom,kpss-wdt";
reg = <0 0x17c10000 0 0x1000>;
clocks = <&sleep_clk>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
};
timer@17c20000{
};
thermal-zones {
- cpu0-thermal {
+ cpu0_thermal: cpu0-thermal {
polling-delay-passive = <250>;
polling-delay = <0>;
};
};
- cpu1-thermal {
+ cpu1_thermal: cpu1-thermal {
polling-delay-passive = <250>;
polling-delay = <0>;
};
};
- cpu2-thermal {
+ cpu2_thermal: cpu2-thermal {
polling-delay-passive = <250>;
polling-delay = <0>;
};
};
- cpu3-thermal {
+ cpu3_thermal: cpu3-thermal {
polling-delay-passive = <250>;
polling-delay = <0>;
};
};
- cpu4-thermal {
+ cpu4_thermal: cpu4-thermal {
polling-delay-passive = <250>;
polling-delay = <0>;
};
};
- cpu5-thermal {
+ cpu5_thermal: cpu5-thermal {
polling-delay-passive = <250>;
polling-delay = <0>;
};
};
- cpu6-thermal {
+ cpu6_thermal: cpu6-thermal {
polling-delay-passive = <250>;
polling-delay = <0>;
};
};
- cpu7-thermal {
+ cpu7_thermal: cpu7-thermal {
polling-delay-passive = <250>;
polling-delay = <0>;
};
};
- cpu8-thermal {
+ cpu8_thermal: cpu8-thermal {
polling-delay-passive = <250>;
polling-delay = <0>;
};
};
- cpu9-thermal {
+ cpu9_thermal: cpu9-thermal {
polling-delay-passive = <250>;
polling-delay = <0>;
sdhc_1: sdhci@c0c4000 {
compatible = "qcom,sdm630-sdhci", "qcom,sdhci-msm-v5";
reg = <0x0c0c4000 0x1000>,
- <0x0c0c5000 0x1000>;
- reg-names = "hc", "cqhci";
+ <0x0c0c5000 0x1000>,
+ <0x0c0c8000 0x8000>;
+ reg-names = "hc", "cqhci", "ice";
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC1_APPS_CLK>,
- <&gcc GCC_SDCC1_AHB_CLK>,
- <&xo_board>;
- clock-names = "core", "iface", "xo";
+ <&gcc GCC_SDCC1_AHB_CLK>,
+ <&xo_board>,
+ <&gcc GCC_SDCC1_ICE_CORE_CLK>;
+ clock-names = "core", "iface", "xo", "ice";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>;
reg = <0x10>;
// CAM0_RST_N
- reset-gpios = <&tlmm 9 0>;
+ reset-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&cam0_default>;
gpios = <&tlmm 13 0>,
- <&tlmm 9 0>;
+ <&tlmm 9 GPIO_ACTIVE_LOW>;
clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;
clock-names = "xvclk";
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SDM845 OnePlus 6(T) (enchilada / fajita) common device tree source
+ *
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "sdm845.dtsi"
+#include "pm8998.dtsi"
+#include "pmi8998.dtsi"
+
+/delete-node/ &rmtfs_mem;
+
+/ {
+ aliases {
+ hsuart0 = &uart6;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ label = "Volume keys";
+ autorepeat;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&volume_down_gpio &volume_up_gpio>;
+
+ vol-down {
+ label = "Volume down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>;
+ debounce-interval = <15>;
+ };
+
+ vol-up {
+ label = "Volume up";
+ linux,code = <KEY_VOLUMEUP>;
+ gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
+ debounce-interval = <15>;
+ };
+ };
+
+ reserved-memory {
+ /*
+ * The rmtfs memory region in downstream is 'dynamically allocated'
+ * but given the same address every time. Hard code it as this address is
+ * where the modem firmware expects it to be.
+ */
+ rmtfs_mem: memory@f5b01000 {
+ compatible = "qcom,rmtfs-mem";
+ reg = <0 0xf5b01000 0 0x200000>;
+ no-map;
+
+ qcom,client-id = <1>;
+ qcom,vmid = <15>;
+ };
+
+ /*
+ * It seems like reserving the old rmtfs_mem region is also needed to prevent
+ * random crashes which are most likely modem related, more testing needed.
+ */
+ removed_region: memory@88f00000 {
+ no-map;
+ reg = <0 0x88f00000 0 0x200000>;
+ };
+
+ ramoops: ramoops@ac300000 {
+ compatible = "ramoops";
+ reg = <0 0xac300000 0 0x400000>;
+ record-size = <0x40000>;
+ console-size = <0x40000>;
+ ftrace-size = <0x40000>;
+ pmsg-size = <0x200000>;
+ devinfo-size = <0x1000>;
+ ecc-size = <16>;
+ };
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ };
+
+ /*
+ * Apparently RPMh does not provide support for PM8998 S4 because it
+ * is always-on; model it as a fixed regulator.
+ */
+ vreg_s4a_1p8: pm8998-smps4 {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_s4a_1p8";
+
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+
+ vin-supply = <&vph_pwr>;
+ };
+
+ /*
+ * The touchscreen regulator seems to be controlled somehow by a gpio.
+ * Model it as a fixed regulator and keep it on. Without schematics we
+ * don't know how this is actually wired up...
+ */
+ ts_1p8_supply: ts-1p8-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "ts_1p8_supply";
+
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ gpio = <&tlmm 88 0>;
+ enable-active-high;
+ regulator-boot-on;
+ };
+};
+
+&adsp_pas {
+ status = "okay";
+ firmware-name = "qcom/sdm845/oneplus6/adsp.mbn";
+};
+
+&apps_rsc {
+ pm8998-rpmh-regulators {
+ compatible = "qcom,pm8998-rpmh-regulators";
+ qcom,pmic-id = "a";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+ vdd-s7-supply = <&vph_pwr>;
+ vdd-s8-supply = <&vph_pwr>;
+ vdd-s9-supply = <&vph_pwr>;
+ vdd-s10-supply = <&vph_pwr>;
+ vdd-s11-supply = <&vph_pwr>;
+ vdd-s12-supply = <&vph_pwr>;
+ vdd-s13-supply = <&vph_pwr>;
+ vdd-l1-l27-supply = <&vreg_s7a_1p025>;
+ vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
+ vdd-l3-l11-supply = <&vreg_s7a_1p025>;
+ vdd-l4-l5-supply = <&vreg_s7a_1p025>;
+ vdd-l6-supply = <&vph_pwr>;
+ vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
+ vdd-l9-supply = <&vreg_bob>;
+ vdd-l10-l23-l25-supply = <&vreg_bob>;
+ vdd-l13-l19-l21-supply = <&vreg_bob>;
+ vdd-l16-l28-supply = <&vreg_bob>;
+ vdd-l18-l22-supply = <&vreg_bob>;
+ vdd-l20-l24-supply = <&vreg_bob>;
+ vdd-l26-supply = <&vreg_s3a_1p35>;
+ vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
+
+ vreg_s3a_1p35: smps3 {
+ regulator-min-microvolt = <1352000>;
+ regulator-max-microvolt = <1352000>;
+ };
+
+ vreg_s5a_2p04: smps5 {
+ regulator-min-microvolt = <1904000>;
+ regulator-max-microvolt = <2040000>;
+ };
+
+ vreg_s7a_1p025: smps7 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1028000>;
+ };
+
+ vdda_mipi_dsi0_pll:
+ vdda_qlink_lv:
+ vdda_ufs1_core:
+ vdda_usb1_ss_core:
+ vreg_l1a_0p875: ldo1 {
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2a_1p2: ldo2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-always-on;
+ };
+
+ vreg_l5a_0p8: ldo5 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7a_1p8: ldo7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdda_qusb_hs0_1p8:
+ vreg_l12a_1p8: ldo12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l14a_1p88: ldo14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-always-on;
+ };
+
+ vreg_l17a_1p3: ldo17 {
+ regulator-min-microvolt = <1304000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l20a_2p95: ldo20 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdda_qusb_hs0_3p1:
+ vreg_l24a_3p075: ldo24 {
+ regulator-min-microvolt = <3088000>;
+ regulator-max-microvolt = <3088000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l25a_3p3: ldo25 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3312000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdda_mipi_dsi0_1p2:
+ vdda_ufs1_1p2:
+ vreg_l26a_1p2: ldo26 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l28a_3p0: ldo28 {
+ regulator-min-microvolt = <2856000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ pmi8998-rpmh-regulators {
+ compatible = "qcom,pmi8998-rpmh-regulators";
+ qcom,pmic-id = "b";
+
+ vdd-bob-supply = <&vph_pwr>;
+
+ vreg_bob: bob {
+ regulator-min-microvolt = <3312000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+ regulator-allow-bypass;
+ };
+ };
+
+ pm8005-rpmh-regulators {
+ compatible = "qcom,pm8005-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+
+ vreg_s3c_0p6: smps3 {
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <600000>;
+ };
+ };
+};
+
+&cdsp_pas {
+ status = "okay";
+ firmware-name = "qcom/sdm845/oneplus6/cdsp.mbn";
+};
+
+&dsi0 {
+ status = "okay";
+ vdda-supply = <&vdda_mipi_dsi0_1p2>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /*
+ * Both devices use different panels but all other properties
+ * are common. Compatible line is declared in device dts.
+ */
+ display_panel: panel@0 {
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ vddio-supply = <&vreg_l14a_1p88>;
+
+ reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&panel_reset_pins &panel_te_pin &panel_esd_pin>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+ };
+};
+
+&dsi0_out {
+ remote-endpoint = <&panel_in>;
+ data-lanes = <0 1 2 3>;
+};
+
+&dsi0_phy {
+ status = "okay";
+ vdds-supply = <&vdda_mipi_dsi0_pll>;
+};
+
+&gcc {
+ protected-clocks = <GCC_QSPI_CORE_CLK>,
+ <GCC_QSPI_CORE_CLK_SRC>,
+ <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+ <GCC_LPASS_Q6_AXI_CLK>,
+ <GCC_LPASS_SWAY_CLK>;
+};
+
+&gpu {
+ zap-shader {
+ memory-region = <&gpu_mem>;
+ firmware-name = "qcom/sdm845/oneplus6/a630_zap.mbn";
+ };
+};
+
+&i2c12 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ synaptics-rmi4-i2c@20 {
+ compatible = "syna,rmi4-i2c";
+ reg = <0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&ts_default_pins>;
+
+ vdd-supply = <&vreg_l28a_3p0>;
+ vio-supply = <&ts_1p8_supply>;
+
+ syna,reset-delay-ms = <200>;
+ syna,startup-delay-ms = <200>;
+
+ rmi4-f01@1 {
+ reg = <0x01>;
+ syna,nosleep-mode = <1>;
+ };
+
+ rmi4_f12: rmi4-f12@12 {
+ reg = <0x12>;
+ touchscreen-x-mm = <68>;
+ touchscreen-y-mm = <144>;
+ syna,sensor-type = <1>;
+ syna,rezero-wait-ms = <200>;
+ };
+ };
+};
+
+&mdss {
+ status = "okay";
+};
+
+&mdss_mdp {
+ status = "okay";
+};
+
+/* Modem/wifi*/
+&mss_pil {
+ status = "okay";
+ firmware-name = "qcom/sdm845/oneplus6/mba.mbn", "qcom/sdm845/oneplus6/modem.mbn";
+};
+
+&pm8998_gpio {
+ volume_down_gpio: pm8998_gpio5 {
+ pinconf {
+ pins = "gpio5";
+ function = "normal";
+ input-enable;
+ bias-pull-up;
+ qcom,drive-strength = <0>;
+ };
+ };
+
+ volume_up_gpio: pm8998_gpio6 {
+ pinconf {
+ pins = "gpio6";
+ function = "normal";
+ input-enable;
+ bias-pull-up;
+ qcom,drive-strength = <0>;
+ };
+ };
+};
+
+&qupv3_id_1 {
+ status = "okay";
+};
+
+&qupv3_id_0 {
+ status = "okay";
+};
+
+&qup_i2c12_default {
+ mux {
+ pins = "gpio49", "gpio50";
+ function = "qup12";
+ drive-strength = <2>;
+ bias-disable;
+ };
+};
+
+&qup_i2c10_default {
+ pinconf {
+ pins = "gpio55", "gpio56";
+ drive-strength = <2>;
+ bias-disable;
+ };
+};
+
+&qup_uart9_default {
+ pinconf-tx {
+ pins = "gpio4";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ pinconf-rx {
+ pins = "gpio5";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+};
+
+/*
+ * Prevent garbage data on bluetooth UART lines
+ */
+&qup_uart6_default {
+ pinmux {
+ pins = "gpio45", "gpio46", "gpio47", "gpio48";
+ function = "qup6";
+ };
+
+ cts {
+ pins = "gpio45";
+ bias-pull-down;
+ };
+
+ rts-tx {
+ pins = "gpio46", "gpio47";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ rx {
+ pins = "gpio48";
+ bias-pull-up;
+ };
+};
+
+&uart6 {
+ status = "okay";
+
+ bluetooth {
+ compatible = "qcom,wcn3990-bt";
+
+ /*
+ * This path is relative to the qca/
+ * subdir under lib/firmware.
+ */
+ firmware-name = "oneplus6/crnv21.bin";
+
+ vddio-supply = <&vreg_s4a_1p8>;
+ vddxo-supply = <&vreg_l7a_1p8>;
+ vddrf-supply = <&vreg_l17a_1p3>;
+ vddch0-supply = <&vreg_l25a_3p3>;
+ max-speed = <3200000>;
+ };
+};
+
+&ufs_mem_hc {
+ status = "okay";
+
+ reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
+
+ vcc-supply = <&vreg_l20a_2p95>;
+ vcc-max-microamp = <600000>;
+};
+
+&ufs_mem_phy {
+ status = "okay";
+
+ vdda-phy-supply = <&vdda_ufs1_core>;
+ vdda-pll-supply = <&vdda_ufs1_1p2>;
+};
+
+&usb_1 {
+ status = "okay";
+
+ /*
+ * disable USB3 clock requirement as the device only supports
+ * USB2.
+ */
+ qcom,select-utmi-as-pipe-clk;
+};
+
+&usb_1_dwc3 {
+ /*
+ * We don't have the capability to switch modes yet.
+ */
+ dr_mode = "peripheral";
+
+ /* fastest mode for USB 2 */
+ maximum-speed = "high-speed";
+
+ /* Remove USB3 phy as it's unused on this device. */
+ phys = <&usb_1_hsphy>;
+ phy-names = "usb2-phy";
+};
+
+&usb_1_hsphy {
+ status = "okay";
+
+ vdd-supply = <&vdda_usb1_ss_core>;
+ vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
+ vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
+
+ qcom,imp-res-offset-value = <8>;
+ qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
+ qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
+ qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
+};
+
+&tlmm {
+ gpio-reserved-ranges = <0 4>, <81 4>;
+
+ tri_state_key_default: tri_state_key_default {
+ mux {
+ pins = "gpio40", "gpio42", "gpio26";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ ts_default_pins: ts-int {
+ mux {
+ pins = "gpio99", "gpio125";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-pull-up;
+ };
+ };
+
+ panel_reset_pins: panel-reset {
+ mux {
+ pins = "gpio6", "gpio25", "gpio26";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable = <0>;
+ };
+ };
+
+ panel_te_pin: panel-te {
+ mux {
+ pins = "gpio10";
+ function = "mdp_vsync";
+ drive-strength = <2>;
+ bias-disable;
+ input-enable;
+ };
+ };
+
+ panel_esd_pin: panel-esd {
+ mux {
+ pins = "gpio30";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ input-enable;
+ };
+ };
+};
+
+&wifi {
+ status = "okay";
+ vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
+ vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+ vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+ vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+
+ qcom,snoc-host-cap-8bit-quirk;
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SDM845 OnePlus 6 (enchilada) device tree.
+ *
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+#include "sdm845-oneplus-common.dtsi"
+
+/ {
+ model = "OnePlus 6";
+ compatible = "oneplus,enchilada", "qcom,sdm845";
+};
+
+&display_panel {
+ status = "okay";
+
+ compatible = "samsung,sofef00";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SDM845 OnePlus 6T (fajita) device tree.
+ *
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+#include "sdm845-oneplus-common.dtsi"
+
+/ {
+ model = "OnePlus 6T";
+ compatible = "oneplus,fajita", "qcom,sdm845";
+};
+
+&display_panel {
+ status = "okay";
+
+ compatible = "samsung,s6e3fc2x01";
+};
+
+&rmi4_f12 {
+ touchscreen-y-mm = <148>;
+};
compatible = "qcom,apss-wdt-sdm845", "qcom,kpss-wdt";
reg = <0 0x17980000 0 0x1000>;
clocks = <&sleep_clk>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
};
apss_shared: mailbox@17990000 {
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include <dt-bindings/sound/qcom,q6afe.h>
#include <dt-bindings/sound/qcom,q6asm.h>
-#include "sdm845.dtsi"
+#include "sdm850.dtsi"
#include "pm8998.dtsi"
/ {
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SDM850 SoC device tree source
+ *
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+#include "sdm845.dtsi"
+
+&cpu4_opp_table {
+ cpu4_opp33: opp-2841600000 {
+ opp-hz = /bits/ 64 <2841600000>;
+ opp-peak-kBps = <7216000 25497600>;
+ };
+
+ cpu4_opp34: opp-2956800000 {
+ opp-hz = /bits/ 64 <2956800000>;
+ opp-peak-kBps = <7216000 25497600>;
+ turbo-mode;
+ };
+};
compatible = "qcom,kryo485";
reg = <0x0 0x0>;
enable-method = "psci";
+ capacity-dmips-mhz = <488>;
+ dynamic-power-coefficient = <232>;
next-level-cache = <&L2_0>;
qcom,freq-domain = <&cpufreq_hw 0>;
+ power-domains = <&CPU_PD0>;
+ power-domain-names = "psci";
#cooling-cells = <2>;
L2_0: l2-cache {
compatible = "cache";
compatible = "qcom,kryo485";
reg = <0x0 0x100>;
enable-method = "psci";
+ capacity-dmips-mhz = <488>;
+ dynamic-power-coefficient = <232>;
next-level-cache = <&L2_100>;
qcom,freq-domain = <&cpufreq_hw 0>;
+ power-domains = <&CPU_PD1>;
+ power-domain-names = "psci";
#cooling-cells = <2>;
L2_100: l2-cache {
compatible = "cache";
compatible = "qcom,kryo485";
reg = <0x0 0x200>;
enable-method = "psci";
+ capacity-dmips-mhz = <488>;
+ dynamic-power-coefficient = <232>;
next-level-cache = <&L2_200>;
qcom,freq-domain = <&cpufreq_hw 0>;
+ power-domains = <&CPU_PD2>;
+ power-domain-names = "psci";
#cooling-cells = <2>;
L2_200: l2-cache {
compatible = "cache";
compatible = "qcom,kryo485";
reg = <0x0 0x300>;
enable-method = "psci";
+ capacity-dmips-mhz = <488>;
+ dynamic-power-coefficient = <232>;
next-level-cache = <&L2_300>;
qcom,freq-domain = <&cpufreq_hw 0>;
+ power-domains = <&CPU_PD3>;
+ power-domain-names = "psci";
#cooling-cells = <2>;
L2_300: l2-cache {
compatible = "cache";
compatible = "qcom,kryo485";
reg = <0x0 0x400>;
enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ dynamic-power-coefficient = <369>;
next-level-cache = <&L2_400>;
qcom,freq-domain = <&cpufreq_hw 1>;
+ power-domains = <&CPU_PD4>;
+ power-domain-names = "psci";
#cooling-cells = <2>;
L2_400: l2-cache {
compatible = "cache";
compatible = "qcom,kryo485";
reg = <0x0 0x500>;
enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ dynamic-power-coefficient = <369>;
next-level-cache = <&L2_500>;
qcom,freq-domain = <&cpufreq_hw 1>;
+ power-domains = <&CPU_PD5>;
+ power-domain-names = "psci";
#cooling-cells = <2>;
L2_500: l2-cache {
compatible = "cache";
compatible = "qcom,kryo485";
reg = <0x0 0x600>;
enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ dynamic-power-coefficient = <369>;
next-level-cache = <&L2_600>;
qcom,freq-domain = <&cpufreq_hw 1>;
+ power-domains = <&CPU_PD6>;
+ power-domain-names = "psci";
#cooling-cells = <2>;
L2_600: l2-cache {
compatible = "cache";
compatible = "qcom,kryo485";
reg = <0x0 0x700>;
enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ dynamic-power-coefficient = <421>;
next-level-cache = <&L2_700>;
qcom,freq-domain = <&cpufreq_hw 2>;
+ power-domains = <&CPU_PD7>;
+ power-domain-names = "psci";
#cooling-cells = <2>;
L2_700: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
};
};
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&CPU0>;
+ };
+
+ core1 {
+ cpu = <&CPU1>;
+ };
+
+ core2 {
+ cpu = <&CPU2>;
+ };
+
+ core3 {
+ cpu = <&CPU3>;
+ };
+
+ core4 {
+ cpu = <&CPU4>;
+ };
+
+ core5 {
+ cpu = <&CPU5>;
+ };
+
+ core6 {
+ cpu = <&CPU6>;
+ };
+
+ core7 {
+ cpu = <&CPU7>;
+ };
+ };
+ };
+
+ idle-states {
+ entry-method = "psci";
+
+ LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+ compatible = "arm,idle-state";
+ idle-state-name = "little-rail-power-collapse";
+ arm,psci-suspend-param = <0x40000004>;
+ entry-latency-us = <355>;
+ exit-latency-us = <909>;
+ min-residency-us = <3934>;
+ local-timer-stop;
+ };
+
+ BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+ compatible = "arm,idle-state";
+ idle-state-name = "big-rail-power-collapse";
+ arm,psci-suspend-param = <0x40000004>;
+ entry-latency-us = <241>;
+ exit-latency-us = <1461>;
+ min-residency-us = <4488>;
+ local-timer-stop;
+ };
+ };
+
+ domain-idle-states {
+ CLUSTER_SLEEP_0: cluster-sleep-0 {
+ compatible = "domain-idle-state";
+ idle-state-name = "cluster-power-collapse";
+ arm,psci-suspend-param = <0x4100c244>;
+ entry-latency-us = <3263>;
+ exit-latency-us = <6562>;
+ min-residency-us = <9987>;
+ local-timer-stop;
+ };
+ };
};
firmware {
psci {
compatible = "arm,psci-1.0";
method = "smc";
+
+ CPU_PD0: cpu0 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+ };
+
+ CPU_PD1: cpu1 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+ };
+
+ CPU_PD2: cpu2 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+ };
+
+ CPU_PD3: cpu3 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+ };
+
+ CPU_PD4: cpu4 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&BIG_CPU_SLEEP_0>;
+ };
+
+ CPU_PD5: cpu5 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&BIG_CPU_SLEEP_0>;
+ };
+
+ CPU_PD6: cpu6 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&BIG_CPU_SLEEP_0>;
+ };
+
+ CPU_PD7: cpu7 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&BIG_CPU_SLEEP_0>;
+ };
+
+ CLUSTER_PD: cpu-cluster0 {
+ #power-domain-cells = <0>;
+ domain-idle-states = <&CLUSTER_SLEEP_0>;
+ };
};
reserved-memory {
compatible = "qcom,apss-wdt-sm8150", "qcom,kpss-wdt";
reg = <0 0x17c10000 0 0x1000>;
clocks = <&sleep_clk>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
};
timer@17c20000 {
stdout-path = "serial0:115200n8";
};
+ thermal-zones {
+ camera-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&pm8150l_adc_tm 0>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ conn-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&pm8150b_adc_tm 0>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ mmw-pa1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&pm8150_adc_tm 2>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ mmw-pa2-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&pm8150l_adc_tm 2>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ skin-msm-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&pm8150l_adc_tm 1>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ skin-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&pm8150_adc_tm 1>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ xo-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&pm8150_adc_tm 0>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+ };
+
vph_pwr: vph-pwr-regulator {
compatible = "regulator-fixed";
regulator-name = "vph_pwr";
regulator-max-microvolt = <3008000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
+
+ vreg_l18a_0p9: ldo18 {
+ regulator-name = "vreg_l18a_0p9";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
};
pm8150l-rpmh-regulators {
firmware-name = "qcom/sm8250/cdsp.mbn";
};
+&gpu {
+ zap-shader {
+ memory-region = <&gpu_mem>;
+ firmware-name = "qcom/sm8250/a650_zap.mbn";
+ };
+};
+
&i2c1 {
status = "okay";
clock-frequency = <1000000>;
/* rtc6226 @ 64 */
};
+&pm8150_adc {
+ xo-therm@4c {
+ reg = <ADC5_XO_THERM_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ };
+
+ skin-therm@4d {
+ reg = <ADC5_AMUX_THM1_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ };
+
+ pa-therm1@4e {
+ reg = <ADC5_AMUX_THM2_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ };
+};
+
+&pm8150_adc_tm {
+ status = "okay";
+
+ xo-therm@0 {
+ reg = <0>;
+ io-channels = <&pm8150_adc ADC5_XO_THERM_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ skin-therm@1 {
+ reg = <1>;
+ io-channels = <&pm8150_adc ADC5_AMUX_THM1_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ pa-therm1@2 {
+ reg = <2>;
+ io-channels = <&pm8150_adc ADC5_AMUX_THM2_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+};
+
+&pm8150b_adc {
+ conn-therm@4f {
+ reg = <ADC5_AMUX_THM3_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ };
+};
+
+&pm8150b_adc_tm {
+ status = "okay";
+
+ conn-therm@0 {
+ reg = <0>;
+ io-channels = <&pm8150b_adc ADC5_AMUX_THM3_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+};
+
+&pm8150l_adc_tm {
+ status = "okay";
+
+ camera-flash-therm@0 {
+ reg = <0>;
+ io-channels = <&pm8150l_adc ADC5_AMUX_THM1_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ skin-msm-therm@1 {
+ reg = <1>;
+ io-channels = <&pm8150l_adc ADC5_AMUX_THM2_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ pa-therm2@2 {
+ reg = <2>;
+ io-channels = <&pm8150l_adc ADC5_AMUX_THM3_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+};
+
+&pm8150l_adc {
+ camera-flash-therm@4d {
+ reg = <ADC5_AMUX_THM1_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ };
+
+ skin-msm-therm@4e {
+ reg = <ADC5_AMUX_THM2_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ };
+
+ pa-therm2@4f {
+ reg = <ADC5_AMUX_THM3_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ };
+};
+
&pm8150_rtc {
status = "okay";
};
vdda-pll-supply = <&vreg_l9a_1p2>;
vdda-pll-max-microamp = <19000>;
};
+
+&usb_1 {
+ status = "okay";
+};
+
+&usb_1_dwc3 {
+ dr_mode = "host";
+};
+
+&usb_1_hsphy {
+ status = "okay";
+
+ vdda-pll-supply = <&vreg_l5a_0p875>;
+ vdda18-supply = <&vreg_l12a_1p8>;
+ vdda33-supply = <&vreg_l2a_3p1>;
+};
+
+&usb_1_qmpphy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l9a_1p2>;
+ vdda-pll-supply = <&vreg_l18a_0p9>;
+};
+
+&usb_2 {
+ status = "okay";
+};
+
+&usb_2_dwc3 {
+ dr_mode = "host";
+};
+
+&usb_2_hsphy {
+ status = "okay";
+
+ vdda-pll-supply = <&vreg_l5a_0p875>;
+ vdda18-supply = <&vreg_l12a_1p8>;
+ vdda33-supply = <&vreg_l2a_3p1>;
+};
+
+&usb_2_qmpphy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l9a_1p2>;
+ vdda-pll-supply = <&vreg_l18a_0p9>;
+};
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,dispcc-sm8250.h>
#include <dt-bindings/clock/qcom,gcc-sm8250.h>
#include <dt-bindings/clock/qcom,gpucc-sm8250.h>
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/interconnect/qcom,osm-l3.h>
+#include <dt-bindings/interconnect/qcom,sm8250.h>
#include <dt-bindings/mailbox/qcom-ipcc.h>
#include <dt-bindings/power/qcom-aoss-qmp.h>
#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,apr.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
#include <dt-bindings/thermal/thermal.h>
/ {
compatible = "qcom,kryo485";
reg = <0x0 0x0>;
enable-method = "psci";
+ capacity-dmips-mhz = <448>;
+ dynamic-power-coefficient = <205>;
next-level-cache = <&L2_0>;
qcom,freq-domain = <&cpufreq_hw 0>;
#cooling-cells = <2>;
compatible = "qcom,kryo485";
reg = <0x0 0x100>;
enable-method = "psci";
+ capacity-dmips-mhz = <448>;
+ dynamic-power-coefficient = <205>;
next-level-cache = <&L2_100>;
qcom,freq-domain = <&cpufreq_hw 0>;
#cooling-cells = <2>;
compatible = "qcom,kryo485";
reg = <0x0 0x200>;
enable-method = "psci";
+ capacity-dmips-mhz = <448>;
+ dynamic-power-coefficient = <205>;
next-level-cache = <&L2_200>;
qcom,freq-domain = <&cpufreq_hw 0>;
#cooling-cells = <2>;
compatible = "qcom,kryo485";
reg = <0x0 0x300>;
enable-method = "psci";
+ capacity-dmips-mhz = <448>;
+ dynamic-power-coefficient = <205>;
next-level-cache = <&L2_300>;
qcom,freq-domain = <&cpufreq_hw 0>;
#cooling-cells = <2>;
compatible = "qcom,kryo485";
reg = <0x0 0x400>;
enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ dynamic-power-coefficient = <379>;
next-level-cache = <&L2_400>;
qcom,freq-domain = <&cpufreq_hw 1>;
#cooling-cells = <2>;
compatible = "qcom,kryo485";
reg = <0x0 0x500>;
enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ dynamic-power-coefficient = <379>;
next-level-cache = <&L2_500>;
qcom,freq-domain = <&cpufreq_hw 1>;
#cooling-cells = <2>;
compatible = "qcom,kryo485";
reg = <0x0 0x600>;
enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ dynamic-power-coefficient = <379>;
next-level-cache = <&L2_600>;
qcom,freq-domain = <&cpufreq_hw 1>;
#cooling-cells = <2>;
compatible = "qcom,kryo485";
reg = <0x0 0x700>;
enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ dynamic-power-coefficient = <444>;
next-level-cache = <&L2_700>;
qcom,freq-domain = <&cpufreq_hw 2>;
#cooling-cells = <2>;
next-level-cache = <&L3_0>;
};
};
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&CPU0>;
+ };
+
+ core1 {
+ cpu = <&CPU1>;
+ };
+
+ core2 {
+ cpu = <&CPU2>;
+ };
+
+ core3 {
+ cpu = <&CPU3>;
+ };
+
+ core4 {
+ cpu = <&CPU4>;
+ };
+
+ core5 {
+ cpu = <&CPU5>;
+ };
+
+ core6 {
+ cpu = <&CPU6>;
+ };
+
+ core7 {
+ cpu = <&CPU7>;
+ };
+ };
+ };
};
firmware {
reg = <0x0 0x80000000 0x0 0x0>;
};
+ mmcx_reg: mmcx-reg {
+ compatible = "regulator-fixed-domain";
+ power-domains = <&rpmhpd SM8250_MMCX>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ regulator-name = "MMCX";
+ };
+
pmu {
compatible = "arm,armv8-pmuv3";
interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
};
};
- smem: qcom,smem {
+ smem {
compatible = "qcom,smem";
memory-region = <&smem_mem>;
hwlocks = <&tcsr_mutex 3>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
+ pcie0: pci@1c00000 {
+ compatible = "qcom,pcie-sm8250", "snps,dw-pcie";
+ reg = <0 0x01c00000 0 0x3000>,
+ <0 0x60000000 0 0xf1d>,
+ <0 0x60000f20 0 0xa8>,
+ <0 0x60001000 0 0x1000>,
+ <0 0x60100000 0 0x100000>;
+ reg-names = "parf", "dbi", "elbi", "atu", "config";
+ device_type = "pci";
+ linux,pci-domain = <0>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <1>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>,
+ <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0x3d00000>;
+
+ interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+ clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
+ <&gcc GCC_PCIE_0_AUX_CLK>,
+ <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+ <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+ <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+ <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>,
+ <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>;
+ clock-names = "pipe",
+ "aux",
+ "cfg",
+ "bus_master",
+ "bus_slave",
+ "slave_q2a",
+ "tbu",
+ "ddrss_sf_tbu";
+
+ iommus = <&apps_smmu 0x1c00 0x7f>;
+ iommu-map = <0x0 &apps_smmu 0x1c00 0x1>,
+ <0x100 &apps_smmu 0x1c01 0x1>;
+
+ resets = <&gcc GCC_PCIE_0_BCR>;
+ reset-names = "pci";
+
+ power-domains = <&gcc PCIE_0_GDSC>;
+
+ phys = <&pcie0_lane>;
+ phy-names = "pciephy";
+
+ status = "disabled";
+ };
+
+ pcie0_phy: phy@1c06000 {
+ compatible = "qcom,sm8250-qmp-gen3x1-pcie-phy";
+ reg = <0 0x01c06000 0 0x1c0>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
+ <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_WIFI_CLKREF_EN>,
+ <&gcc GCC_PCIE0_PHY_REFGEN_CLK>;
+ clock-names = "aux", "cfg_ahb", "ref", "refgen";
+
+ resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+ reset-names = "phy";
+
+ assigned-clocks = <&gcc GCC_PCIE0_PHY_REFGEN_CLK>;
+ assigned-clock-rates = <100000000>;
+
+ status = "disabled";
+
+ pcie0_lane: lanes@1c06200 {
+ reg = <0 0x1c06200 0 0x170>, /* tx */
+ <0 0x1c06400 0 0x200>, /* rx */
+ <0 0x1c06800 0 0x1f0>, /* pcs */
+ <0 0x1c06c00 0 0xf4>; /* "pcs_lane" same as pcs_misc? */
+ clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
+ clock-names = "pipe0";
+
+ #phy-cells = <0>;
+ clock-output-names = "pcie_0_pipe_clk";
+ };
+ };
+
+ pcie1: pci@1c08000 {
+ compatible = "qcom,pcie-sm8250", "snps,dw-pcie";
+ reg = <0 0x01c08000 0 0x3000>,
+ <0 0x40000000 0 0xf1d>,
+ <0 0x40000f20 0 0xa8>,
+ <0 0x40001000 0 0x1000>,
+ <0 0x40100000 0 0x100000>;
+ reg-names = "parf", "dbi", "elbi", "atu", "config";
+ device_type = "pci";
+ linux,pci-domain = <1>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <2>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>,
+ <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
+
+ interrupts = <GIC_SPI 306 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+ clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
+ <&gcc GCC_PCIE_1_AUX_CLK>,
+ <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
+ <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
+ <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
+ <&gcc GCC_PCIE_WIGIG_CLKREF_EN>,
+ <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>,
+ <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>;
+ clock-names = "pipe",
+ "aux",
+ "cfg",
+ "bus_master",
+ "bus_slave",
+ "slave_q2a",
+ "ref",
+ "tbu",
+ "ddrss_sf_tbu";
+
+ assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ iommus = <&apps_smmu 0x1c80 0x7f>;
+ iommu-map = <0x0 &apps_smmu 0x1c80 0x1>,
+ <0x100 &apps_smmu 0x1c81 0x1>;
+
+ resets = <&gcc GCC_PCIE_1_BCR>;
+ reset-names = "pci";
+
+ power-domains = <&gcc PCIE_1_GDSC>;
+
+ phys = <&pcie1_lane>;
+ phy-names = "pciephy";
+
+ status = "disabled";
+ };
+
+ pcie1_phy: phy@1c0e000 {
+ compatible = "qcom,sm8250-qmp-gen3x2-pcie-phy";
+ reg = <0 0x01c0e000 0 0x1c0>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
+ <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_WIGIG_CLKREF_EN>,
+ <&gcc GCC_PCIE1_PHY_REFGEN_CLK>;
+ clock-names = "aux", "cfg_ahb", "ref", "refgen";
+
+ resets = <&gcc GCC_PCIE_1_PHY_BCR>;
+ reset-names = "phy";
+
+ assigned-clocks = <&gcc GCC_PCIE1_PHY_REFGEN_CLK>;
+ assigned-clock-rates = <100000000>;
+
+ status = "disabled";
+
+ pcie1_lane: lanes@1c0e200 {
+ reg = <0 0x1c0e200 0 0x170>, /* tx0 */
+ <0 0x1c0e400 0 0x200>, /* rx0 */
+ <0 0x1c0ea00 0 0x1f0>, /* pcs */
+ <0 0x1c0e600 0 0x170>, /* tx1 */
+ <0 0x1c0e800 0 0x200>, /* rx1 */
+ <0 0x1c0ee00 0 0xf4>; /* "pcs_com" same as pcs_misc? */
+ clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
+ clock-names = "pipe0";
+
+ #phy-cells = <0>;
+ clock-output-names = "pcie_1_pipe_clk";
+ };
+ };
+
+ pcie2: pci@1c10000 {
+ compatible = "qcom,pcie-sm8250", "snps,dw-pcie";
+ reg = <0 0x01c10000 0 0x3000>,
+ <0 0x64000000 0 0xf1d>,
+ <0 0x64000f20 0 0xa8>,
+ <0 0x64001000 0 0x1000>,
+ <0 0x64100000 0 0x100000>;
+ reg-names = "parf", "dbi", "elbi", "atu", "config";
+ device_type = "pci";
+ linux,pci-domain = <2>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <2>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ranges = <0x01000000 0x0 0x64200000 0x0 0x64200000 0x0 0x100000>,
+ <0x02000000 0x0 0x64300000 0x0 0x64300000 0x0 0x3d00000>;
+
+ interrupts = <GIC_SPI 236 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 290 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 415 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 416 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 417 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+ clocks = <&gcc GCC_PCIE_2_PIPE_CLK>,
+ <&gcc GCC_PCIE_2_AUX_CLK>,
+ <&gcc GCC_PCIE_2_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_2_MSTR_AXI_CLK>,
+ <&gcc GCC_PCIE_2_SLV_AXI_CLK>,
+ <&gcc GCC_PCIE_2_SLV_Q2A_AXI_CLK>,
+ <&gcc GCC_PCIE_MDM_CLKREF_EN>,
+ <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>,
+ <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>;
+ clock-names = "pipe",
+ "aux",
+ "cfg",
+ "bus_master",
+ "bus_slave",
+ "slave_q2a",
+ "ref",
+ "tbu",
+ "ddrss_sf_tbu";
+
+ assigned-clocks = <&gcc GCC_PCIE_2_AUX_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ iommus = <&apps_smmu 0x1d00 0x7f>;
+ iommu-map = <0x0 &apps_smmu 0x1d00 0x1>,
+ <0x100 &apps_smmu 0x1d01 0x1>;
+
+ resets = <&gcc GCC_PCIE_2_BCR>;
+ reset-names = "pci";
+
+ power-domains = <&gcc PCIE_2_GDSC>;
+
+ phys = <&pcie2_lane>;
+ phy-names = "pciephy";
+
+ status = "disabled";
+ };
+
+ pcie2_phy: phy@1c16000 {
+ compatible = "qcom,sm8250-qmp-modem-pcie-phy";
+ reg = <0 0x1c16000 0 0x1c0>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
+ <&gcc GCC_PCIE_2_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_MDM_CLKREF_EN>,
+ <&gcc GCC_PCIE2_PHY_REFGEN_CLK>;
+ clock-names = "aux", "cfg_ahb", "ref", "refgen";
+
+ resets = <&gcc GCC_PCIE_2_PHY_BCR>;
+ reset-names = "phy";
+
+ assigned-clocks = <&gcc GCC_PCIE2_PHY_REFGEN_CLK>;
+ assigned-clock-rates = <100000000>;
+
+ status = "disabled";
+
+ pcie2_lane: lanes@1c0e200 {
+ reg = <0 0x1c16200 0 0x170>, /* tx0 */
+ <0 0x1c16400 0 0x200>, /* rx0 */
+ <0 0x1c16a00 0 0x1f0>, /* pcs */
+ <0 0x1c16600 0 0x170>, /* tx1 */
+ <0 0x1c16800 0 0x200>, /* rx1 */
+ <0 0x1c16e00 0 0xf4>; /* "pcs_com" same as pcs_misc? */
+ clocks = <&gcc GCC_PCIE_2_PIPE_CLK>;
+ clock-names = "pipe0";
+
+ #phy-cells = <0>;
+ clock-output-names = "pcie_2_pipe_clk";
+ };
+ };
+
ufs_mem_hc: ufshc@1d84000 {
compatible = "qcom,sm8250-ufshc", "qcom,ufshc",
"jedec,ufs-2.0";
#hwlock-cells = <1>;
};
+ wsamacro: codec@3240000 {
+ compatible = "qcom,sm8250-lpass-wsa-macro";
+ reg = <0 0x03240000 0 0x1000>;
+ clocks = <&audiocc 1>,
+ <&audiocc 0>,
+ <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&aoncc 0>,
+ <&vamacro>;
+
+ clock-names = "mclk", "npl", "macro", "dcodec", "va", "fsgen";
+
+ #clock-cells = <0>;
+ clock-frequency = <9600000>;
+ clock-output-names = "mclk";
+ #sound-dai-cells = <1>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&wsa_swr_active>;
+ };
+
+ swr0: soundwire-controller@3250000 {
+ reg = <0 0x03250000 0 0x2000>;
+ compatible = "qcom,soundwire-v1.5.1";
+ interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&wsamacro>;
+ clock-names = "iface";
+
+ qcom,din-ports = <2>;
+ qcom,dout-ports = <6>;
+
+ qcom,ports-sinterval-low = /bits/ 8 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x0f 0x0f>;
+ qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0c 0x06 0x12 0x0d 0x07 0x0a>;
+ qcom,ports-offset2 = /bits/ 8 <0xff 0x00 0x1f 0xff 0x00 0x1f 0x00 0x00>;
+ qcom,ports-block-pack-mode = /bits/ 8 <0x0 0x0 0x1 0x0 0x0 0x1 0x0 0x0>;
+
+ #sound-dai-cells = <1>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ };
+
+ audiocc: clock-controller@3300000 {
+ compatible = "qcom,sm8250-lpass-audiocc";
+ reg = <0 0x03300000 0 0x30000>;
+ #clock-cells = <1>;
+ clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+ clock-names = "core", "audio", "bus";
+ };
+
+ vamacro: codec@3370000 {
+ compatible = "qcom,sm8250-lpass-va-macro";
+ reg = <0 0x03370000 0 0x1000>;
+ clocks = <&aoncc 0>,
+ <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+
+ clock-names = "mclk", "macro", "dcodec";
+
+ #clock-cells = <0>;
+ clock-frequency = <9600000>;
+ clock-output-names = "fsgen";
+ #sound-dai-cells = <1>;
+ };
+
+ aoncc: clock-controller@3380000 {
+ compatible = "qcom,sm8250-lpass-aoncc";
+ reg = <0 0x03380000 0 0x40000>;
+ #clock-cells = <1>;
+ clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6afecc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+ clock-names = "core", "audio", "bus";
+ };
+
+ lpass_tlmm: pinctrl@33c0000{
+ compatible = "qcom,sm8250-lpass-lpi-pinctrl";
+ reg = <0 0x033c0000 0x0 0x20000>,
+ <0 0x03550000 0x0 0x10000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&lpass_tlmm 0 0 14>;
+
+ clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+ clock-names = "core", "audio";
+
+ wsa_swr_active: wsa-swr-active-pins {
+ clk {
+ pins = "gpio10";
+ function = "wsa_swr_clk";
+ drive-strength = <2>;
+ slew-rate = <1>;
+ bias-disable;
+ };
+
+ data {
+ pins = "gpio11";
+ function = "wsa_swr_data";
+ drive-strength = <2>;
+ slew-rate = <1>;
+ bias-bus-hold;
+
+ };
+ };
+
+ wsa_swr_sleep: wsa-swr-sleep-pins {
+ clk {
+ pins = "gpio10";
+ function = "wsa_swr_clk";
+ drive-strength = <2>;
+ input-enable;
+ bias-pull-down;
+ };
+
+ data {
+ pins = "gpio11";
+ function = "wsa_swr_data";
+ drive-strength = <2>;
+ input-enable;
+ bias-pull-down;
+
+ };
+ };
+
+ dmic01_active: dmic01-active-pins {
+ clk {
+ pins = "gpio6";
+ function = "dmic1_clk";
+ drive-strength = <8>;
+ output-high;
+ };
+ data {
+ pins = "gpio7";
+ function = "dmic1_data";
+ drive-strength = <8>;
+ input-enable;
+ };
+ };
+
+ dmic01_sleep: dmic01-sleep-pins {
+ clk {
+ pins = "gpio6";
+ function = "dmic1_clk";
+ drive-strength = <2>;
+ bias-disable;
+ output-low;
+ };
+
+ data {
+ pins = "gpio7";
+ function = "dmic1_data";
+ drive-strength = <2>;
+ pull-down;
+ input-enable;
+ };
+ };
+ };
+
gpu: gpu@3d00000 {
- /*
- * note: the amd,imageon compatible makes it possible
- * to use the drm/msm driver without the display node,
- * make sure to remove it when display node is added
- */
compatible = "qcom,adreno-650.2",
- "qcom,adreno",
- "amd,imageon";
+ "qcom,adreno";
#stream-id-cells = <16>;
reg = <0 0x03d00000 0 0x40000>;
};
};
+ sound: sound {
+ };
+
usb_1_hsphy: phy@88e3000 {
compatible = "qcom,sm8250-usb-hs-phy",
"qcom,usb-snps-hs-7nm-phy";
clocks = <&gcc GCC_SDCC2_AHB_CLK>,
<&gcc GCC_SDCC2_APPS_CLK>,
- <&xo_board>;
+ <&rpmhcc RPMH_CXO_CLK>;
clock-names = "iface", "core", "xo";
iommus = <&apps_smmu 0x4a0 0x0>;
qcom,dll-config = <0x0007642c>;
};
};
+ system-cache-controller@9200000 {
+ compatible = "qcom,sm8250-llcc";
+ reg = <0 0x09200000 0 0x1d0000>, <0 0x09600000 0 0x50000>;
+ reg-names = "llcc_base", "llcc_broadcast_base";
+ };
+
usb_2: usb@a8f8800 {
compatible = "qcom,sm8250-dwc3", "qcom,dwc3";
reg = <0 0x0a8f8800 0 0x400>;
};
};
+ mdss: mdss@ae00000 {
+ compatible = "qcom,sdm845-mdss";
+ reg = <0 0x0ae00000 0 0x1000>;
+ reg-names = "mdss";
+
+ interconnects = <&gem_noc MASTER_AMPSS_M0 &config_noc SLAVE_DISPLAY_CFG>,
+ <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>,
+ <&mmss_noc MASTER_MDP_PORT1 &mc_virt SLAVE_EBI_CH0>;
+ interconnect-names = "notused", "mdp0-mem", "mdp1-mem";
+
+ power-domains = <&dispcc MDSS_GDSC>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&gcc GCC_DISP_SF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>;
+ clock-names = "iface", "bus", "nrt_bus", "core";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>;
+ assigned-clock-rates = <460000000>;
+
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ iommus = <&apps_smmu 0x820 0x402>;
+
+ status = "disabled";
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ mdss_mdp: mdp@ae01000 {
+ compatible = "qcom,sdm845-dpu";
+ reg = <0 0x0ae01000 0 0x8f000>,
+ <0 0x0aeb0000 0 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "iface", "bus", "core", "vsync";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ assigned-clock-rates = <460000000>,
+ <19200000>;
+
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmhpd SM8250_MMCX>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dpu_intf2_out: endpoint {
+ remote-endpoint = <&dsi1_in>;
+ };
+ };
+ };
+
+ mdp_opp_table: mdp-opp-table {
+ compatible = "operating-points-v2";
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-345000000 {
+ opp-hz = /bits/ 64 <345000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-460000000 {
+ opp-hz = /bits/ 64 <460000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+
+ dsi0: dsi@ae94000 {
+ compatible = "qcom,mdss-dsi-ctrl";
+ reg = <0 0x0ae94000 0 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmhpd SM8250_MMCX>;
+
+ phys = <&dsi0_phy>;
+ phy-names = "dsi";
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi0_in: endpoint {
+ remote-endpoint = <&dpu_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi0_out: endpoint {
+ };
+ };
+ };
+ };
+
+ dsi0_phy: dsi-phy@ae94400 {
+ compatible = "qcom,dsi-phy-7nm";
+ reg = <0 0x0ae94400 0 0x200>,
+ <0 0x0ae94600 0 0x280>,
+ <0 0x0ae94900 0 0x260>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+
+ status = "disabled";
+ };
+
+ dsi1: dsi@ae96000 {
+ compatible = "qcom,mdss-dsi-ctrl";
+ reg = <0 0x0ae96000 0 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmhpd SM8250_MMCX>;
+
+ phys = <&dsi1_phy>;
+ phy-names = "dsi";
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi1_in: endpoint {
+ remote-endpoint = <&dpu_intf2_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi1_out: endpoint {
+ };
+ };
+ };
+ };
+
+ dsi1_phy: dsi-phy@ae96400 {
+ compatible = "qcom,dsi-phy-7nm";
+ reg = <0 0x0ae96400 0 0x200>,
+ <0 0x0ae96600 0 0x280>,
+ <0 0x0ae96900 0 0x260>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+
+ status = "disabled";
+
+ dsi_opp_table: dsi-opp-table {
+ compatible = "operating-points-v2";
+
+ opp-187500000 {
+ opp-hz = /bits/ 64 <187500000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-358000000 {
+ opp-hz = /bits/ 64 <358000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+ };
+ };
+ };
+
+ dispcc: clock-controller@af00000 {
+ compatible = "qcom,sm8250-dispcc";
+ reg = <0 0x0af00000 0 0x20000>;
+ mmcx-supply = <&mmcx_reg>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&dsi0_phy 0>,
+ <&dsi0_phy 1>,
+ <&dsi1_phy 0>,
+ <&dsi1_phy 1>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <&sleep_clk>;
+ clock-names = "bi_tcxo",
+ "dsi0_phy_pll_out_byteclk",
+ "dsi0_phy_pll_out_dsiclk",
+ "dsi1_phy_pll_out_byteclk",
+ "dsi1_phy_pll_out_dsiclk",
+ "dp_link_clk_divsel_ten",
+ "dp_vco_divided_clk_src_mux",
+ "dptx1_phy_pll_link_clk",
+ "dptx1_phy_pll_vco_div_clk",
+ "dptx2_phy_pll_link_clk",
+ "dptx2_phy_pll_vco_div_clk",
+ "edp_phy_pll_link_clk",
+ "edp_phy_pll_vco_div_clk",
+ "sleep_clk";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
pdc: interrupt-controller@b220000 {
compatible = "qcom,sm8250-pdc", "qcom,pdc";
reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>;
gpio-ranges = <&tlmm 0 0 180>;
wakeup-parent = <&pdc>;
+ pri_mi2s_active: pri-mi2s-active {
+ sclk {
+ pins = "gpio138";
+ function = "mi2s0_sck";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ ws {
+ pins = "gpio141";
+ function = "mi2s0_ws";
+ drive-strength = <8>;
+ output-high;
+ };
+
+ data0 {
+ pins = "gpio139";
+ function = "mi2s0_data0";
+ drive-strength = <8>;
+ bias-disable;
+ output-high;
+ };
+
+ data1 {
+ pins = "gpio140";
+ function = "mi2s0_data1";
+ drive-strength = <8>;
+ output-high;
+ };
+ };
+
qup_i2c0_default: qup-i2c0-default {
mux {
pins = "gpio28", "gpio29";
function = "qup18";
};
};
+
+ tert_mi2s_active: tert-mi2s-active {
+ sck {
+ pins = "gpio133";
+ function = "mi2s2_sck";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ data0 {
+ pins = "gpio134";
+ function = "mi2s2_data0";
+ drive-strength = <8>;
+ bias-disable;
+ output-high;
+ };
+
+ ws {
+ pins = "gpio135";
+ function = "mi2s2_ws";
+ drive-strength = <8>;
+ output-high;
+ };
+ };
};
apps_smmu: iommu@15000000 {
label = "lpass";
qcom,remote-pid = <2>;
+ apr {
+ compatible = "qcom,apr-v2";
+ qcom,glink-channels = "apr_audio_svc";
+ qcom,apr-domain = <APR_DOMAIN_ADSP>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ apr-service@3 {
+ reg = <APR_SVC_ADSP_CORE>;
+ compatible = "qcom,q6core";
+ qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+ };
+
+ q6afe: apr-service@4 {
+ compatible = "qcom,q6afe";
+ reg = <APR_SVC_AFE>;
+ qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+ q6afedai: dais {
+ compatible = "qcom,q6afe-dais";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #sound-dai-cells = <1>;
+ };
+
+ q6afecc: cc {
+ compatible = "qcom,q6afe-clocks";
+ #clock-cells = <2>;
+ };
+ };
+
+ q6asm: apr-service@7 {
+ compatible = "qcom,q6asm";
+ reg = <APR_SVC_ASM>;
+ qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+ q6asmdai: dais {
+ compatible = "qcom,q6asm-dais";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #sound-dai-cells = <1>;
+ iommus = <&apps_smmu 0x1801 0x0>;
+ };
+ };
+
+ q6adm: apr-service@8 {
+ compatible = "qcom,q6adm";
+ reg = <APR_SVC_ADM>;
+ qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+ q6routing: routing {
+ compatible = "qcom,q6adm-routing";
+ #sound-dai-cells = <0>;
+ };
+ };
+ };
+
fastrpc {
compatible = "qcom,fastrpc";
qcom,glink-channels = "fastrpcglink-apps-dsp";
compatible = "qcom,apss-wdt-sm8250", "qcom,kpss-wdt";
reg = <0 0x17c10000 0 0x1000>;
clocks = <&sleep_clk>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
};
timer@17c20000 {
--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8350.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. sm8350 MTP";
+ compatible = "qcom,sm8350-mtp", "qcom,sm8350";
+
+ aliases {
+ serial0 = &uart2;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&apps_rsc {
+ pm8350-rpmh-regulators {
+ compatible = "qcom,pm8350-rpmh-regulators";
+ qcom,pmic-id = "b";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+ vdd-s7-supply = <&vph_pwr>;
+ vdd-s8-supply = <&vph_pwr>;
+ vdd-s9-supply = <&vph_pwr>;
+ vdd-s10-supply = <&vph_pwr>;
+ vdd-s11-supply = <&vph_pwr>;
+ vdd-s12-supply = <&vph_pwr>;
+
+ vdd-l1-l4-supply = <&vreg_s11b_0p95>;
+ vdd-l2-l7-supply = <&vreg_bob>;
+ vdd-l3-l5-supply = <&vreg_bob>;
+ vdd-l6-l9-l10-supply = <&vreg_s11b_0p95>;
+ vdd-l8-supply = <&vreg_s2c_0p8>;
+
+ vreg_s10b_1p8: smps10 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vreg_s11b_0p95: smps11 {
+ regulator-min-microvolt = <752000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ vreg_s12b_1p25: smps12 {
+ regulator-min-microvolt = <1224000>;
+ regulator-max-microvolt = <1360000>;
+ };
+
+ vreg_l1b_0p88: ldo1 {
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2b_3p07: ldo2 {
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3b_0p9: ldo3 {
+ regulator-min-microvolt = <904000>;
+ regulator-max-microvolt = <904000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5b_0p88: ldo5 {
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <888000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6b_1p2: ldo6 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1208000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7b_2p96: ldo7 {
+ regulator-min-microvolt = <2400000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9b_1p2: ldo9 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ pm8350c-rpmh-regulators {
+ compatible = "qcom,pm8350c-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+ vdd-s7-supply = <&vph_pwr>;
+ vdd-s8-supply = <&vph_pwr>;
+ vdd-s9-supply = <&vph_pwr>;
+ vdd-s10-supply = <&vph_pwr>;
+
+ vdd-l1-l12-supply = <&vreg_s1c_1p86>;
+ vdd-l2-l8-supply = <&vreg_s1c_1p86>;
+ vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
+ vdd-l6-l9-l11-supply = <&vreg_bob>;
+ vdd-l10-supply = <&vreg_s12b_1p25>;
+
+ vdd-bob-supply = <&vph_pwr>;
+
+ vreg_s1c_1p86: smps1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1952000>;
+ };
+
+ vreg_s2c_0p8: smps2 {
+ regulator-min-microvolt = <640000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ vreg_s10c_1p05: smps10 {
+ regulator-min-microvolt = <1048000>;
+ regulator-max-microvolt = <1128000>;
+ };
+
+ vreg_bob: bob {
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+ };
+
+ vreg_l1c_1p8: ldo1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2c_1p8: ldo2 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3c_3p0: ldo3 {
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4c_uim1: ldo4 {
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5c_uim2: ldo5 {
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6c_1p8: ldo6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7c_3p0: ldo7 {
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8c_1p8: ldo8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9c_2p96: ldo9 {
+ regulator-min-microvolt = <2960000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l10c_1p2: ldo10 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l11c_2p96: ldo11 {
+ regulator-min-microvolt = <2400000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l12c_1p8: ldo12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l13c_3p0: ldo13 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+};
+
+&qupv3_id_1 {
+ status = "okay";
+};
+
+&tlmm {
+ gpio-reserved-ranges = <52 8>;
+};
+
+&uart2 {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Linaro Limaited
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/power/qcom-aoss-qmp.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+/ {
+ interrupt-parent = <&intc>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ chosen { };
+
+ clocks {
+ xo_board: xo-board {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <38400000>;
+ clock-output-names = "xo_board";
+ };
+
+ sleep_clk: sleep-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <32000>;
+ #clock-cells = <0>;
+ };
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ CPU0: cpu@0 {
+ device_type = "cpu";
+ compatible = "qcom,kryo685";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ next-level-cache = <&L2_0>;
+ L2_0: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ L3_0: l3-cache {
+ compatible = "cache";
+ };
+ };
+ };
+
+ CPU1: cpu@100 {
+ device_type = "cpu";
+ compatible = "qcom,kryo685";
+ reg = <0x0 0x100>;
+ enable-method = "psci";
+ next-level-cache = <&L2_100>;
+ L2_100: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU2: cpu@200 {
+ device_type = "cpu";
+ compatible = "qcom,kryo685";
+ reg = <0x0 0x200>;
+ enable-method = "psci";
+ next-level-cache = <&L2_200>;
+ L2_200: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU3: cpu@300 {
+ device_type = "cpu";
+ compatible = "qcom,kryo685";
+ reg = <0x0 0x300>;
+ enable-method = "psci";
+ next-level-cache = <&L2_300>;
+ L2_300: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU4: cpu@400 {
+ device_type = "cpu";
+ compatible = "qcom,kryo685";
+ reg = <0x0 0x400>;
+ enable-method = "psci";
+ next-level-cache = <&L2_400>;
+ L2_400: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU5: cpu@500 {
+ device_type = "cpu";
+ compatible = "qcom,kryo685";
+ reg = <0x0 0x500>;
+ enable-method = "psci";
+ next-level-cache = <&L2_500>;
+ L2_500: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+
+ };
+
+ CPU6: cpu@600 {
+ device_type = "cpu";
+ compatible = "qcom,kryo685";
+ reg = <0x0 0x600>;
+ enable-method = "psci";
+ next-level-cache = <&L2_600>;
+ L2_600: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU7: cpu@700 {
+ device_type = "cpu";
+ compatible = "qcom,kryo685";
+ reg = <0x0 0x700>;
+ enable-method = "psci";
+ next-level-cache = <&L2_700>;
+ L2_700: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+ };
+
+ firmware {
+ scm: scm {
+ compatible = "qcom,scm-sm8350", "qcom,scm";
+ #reset-cells = <1>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ /* We expect the bootloader to fill in the size */
+ reg = <0x0 0x80000000 0x0 0x0>;
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ reserved_memory: reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ hyp_mem: memory@80000000 {
+ reg = <0x0 0x80000000 0x0 0x600000>;
+ no-map;
+ };
+
+ xbl_aop_mem: memory@80700000 {
+ no-map;
+ reg = <0x0 0x80700000 0x0 0x160000>;
+ };
+
+ cmd_db: memory@80860000 {
+ compatible = "qcom,cmd-db";
+ reg = <0x0 0x80860000 0x0 0x20000>;
+ no-map;
+ };
+
+ reserved_xbl_uefi_log: memory@80880000 {
+ reg = <0x0 0x80880000 0x0 0x14000>;
+ no-map;
+ };
+
+ smem_mem: memory@80900000 {
+ reg = <0x0 0x80900000 0x0 0x200000>;
+ no-map;
+ };
+
+ cpucp_fw_mem: memory@80b00000 {
+ reg = <0x0 0x80b00000 0x0 0x100000>;
+ no-map;
+ };
+
+ cdsp_secure_heap: memory@80c00000 {
+ reg = <0x0 0x80c00000 0x0 0x4600000>;
+ no-map;
+ };
+
+ pil_camera_mem: mmeory@85200000 {
+ reg = <0x0 0x85200000 0x0 0x500000>;
+ no-map;
+ };
+
+ pil_video_mem: memory@85700000 {
+ reg = <0x0 0x85700000 0x0 0x500000>;
+ no-map;
+ };
+
+ pil_cvp_mem: memory@85c00000 {
+ reg = <0x0 0x85c00000 0x0 0x500000>;
+ no-map;
+ };
+
+ pil_adsp_mem: memory@86100000 {
+ reg = <0x0 0x86100000 0x0 0x2100000>;
+ no-map;
+ };
+
+ pil_slpi_mem: memory@88200000 {
+ reg = <0x0 0x88200000 0x0 0x1500000>;
+ no-map;
+ };
+
+ pil_cdsp_mem: memory@89700000 {
+ reg = <0x0 0x89700000 0x0 0x1e00000>;
+ no-map;
+ };
+
+ pil_ipa_fw_mem: memory@8b500000 {
+ reg = <0x0 0x8b500000 0x0 0x10000>;
+ no-map;
+ };
+
+ pil_ipa_gsi_mem: memory@8b510000 {
+ reg = <0x0 0x8b510000 0x0 0xa000>;
+ no-map;
+ };
+
+ pil_gpu_mem: memory@8b51a000 {
+ reg = <0x0 0x8b51a000 0x0 0x2000>;
+ no-map;
+ };
+
+ pil_spss_mem: memory@8b600000 {
+ reg = <0x0 0x8b600000 0x0 0x100000>;
+ no-map;
+ };
+
+ pil_modem_mem: memory@8b800000 {
+ reg = <0x0 0x8b800000 0x0 0x10000000>;
+ no-map;
+ };
+
+ hyp_reserved_mem: memory@d0000000 {
+ reg = <0x0 0xd0000000 0x0 0x800000>;
+ no-map;
+ };
+
+ pil_trustedvm_mem: memory@d0800000 {
+ reg = <0x0 0xd0800000 0x0 0x76f7000>;
+ no-map;
+ };
+
+ qrtr_shbuf: memory@d7ef7000 {
+ reg = <0x0 0xd7ef7000 0x0 0x9000>;
+ no-map;
+ };
+
+ chan0_shbuf: memory@d7f00000 {
+ reg = <0x0 0xd7f00000 0x0 0x80000>;
+ no-map;
+ };
+
+ chan1_shbuf: memory@d7f80000 {
+ reg = <0x0 0xd7f80000 0x0 0x80000>;
+ no-map;
+ };
+
+ removed_mem: memory@d8800000 {
+ reg = <0x0 0xd8800000 0x0 0x6800000>;
+ no-map;
+ };
+ };
+
+ smem: qcom,smem {
+ compatible = "qcom,smem";
+ memory-region = <&smem_mem>;
+ hwlocks = <&tcsr_mutex 3>;
+ };
+
+ soc: soc@0 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0 0 0 0 0x10 0>;
+ dma-ranges = <0 0 0 0 0x10 0>;
+ compatible = "simple-bus";
+
+ gcc: clock-controller@100000 {
+ compatible = "qcom,gcc-sm8350";
+ reg = <0x0 0x00100000 0x0 0x1f0000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ clock-names = "bi_tcxo", "sleep_clk";
+ clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>;
+ };
+
+ ipcc: mailbox@408000 {
+ compatible = "qcom,sm8350-ipcc", "qcom,ipcc";
+ reg = <0 0x00408000 0 0x1000>;
+ interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ #mbox-cells = <2>;
+ };
+
+ qupv3_id_1: geniqup@9c0000 {
+ compatible = "qcom,geni-se-qup";
+ reg = <0x0 0x009c0000 0x0 0x6000>;
+ clock-names = "m-ahb", "s-ahb";
+ clocks = <&gcc 121>,
+ <&gcc 122>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "disabled";
+
+ uart2: serial@98c000 {
+ compatible = "qcom,geni-debug-uart";
+ reg = <0 0x0098c000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc 83>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_uart3_default_state>;
+ interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
+
+ tcsr_mutex: hwlock@1f40000 {
+ compatible = "qcom,tcsr-mutex";
+ reg = <0x0 0x01f40000 0x0 0x40000>;
+ #hwlock-cells = <1>;
+ };
+
+ pdc: interrupt-controller@b220000 {
+ compatible = "qcom,sm8350-pdc", "qcom,pdc";
+ reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>;
+ qcom,pdc-ranges = <0 480 40>, <40 140 14>, <54 263 1>, <55 306 4>,
+ <59 312 3>, <62 374 2>, <64 434 2>, <66 438 3>,
+ <69 86 1>, <70 520 54>, <124 609 31>, <155 63 1>,
+ <156 716 12>;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&intc>;
+ interrupt-controller;
+ };
+
+ aoss_qmp: qmp@c300000 {
+ compatible = "qcom,sm8350-aoss-qmp";
+ reg = <0 0x0c300000 0 0x100000>;
+ interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ #clock-cells = <0>;
+ #power-domain-cells = <1>;
+ };
+
+ tlmm: pinctrl@f100000 {
+ compatible = "qcom,sm8350-tlmm";
+ reg = <0 0x0f100000 0 0x300000>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 203>;
+
+ qup_uart3_default_state: qup-uart3-default-state {
+ rx {
+ pins = "gpio18";
+ function = "qup3";
+ };
+ tx {
+ pins = "gpio19";
+ function = "qup3";
+ };
+ };
+ };
+
+ intc: interrupt-controller@17a00000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */
+ <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ timer@17c20000 {
+ compatible = "arm,armv7-timer-mem";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ reg = <0x0 0x17c20000 0x0 0x1000>;
+ clock-frequency = <19200000>;
+
+ frame@17c21000 {
+ frame-number = <0>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0 0x17c21000 0x0 0x1000>,
+ <0x0 0x17c22000 0x0 0x1000>;
+ };
+
+ frame@17c23000 {
+ frame-number = <1>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0 0x17c23000 0x0 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17c25000 {
+ frame-number = <2>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0 0x17c25000 0x0 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17c27000 {
+ frame-number = <3>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0 0x17c27000 0x0 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17c29000 {
+ frame-number = <4>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0 0x17c29000 0x0 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17c2b000 {
+ frame-number = <5>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0 0x17c2b000 0x0 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17c2d000 {
+ frame-number = <6>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0 0x17c2d000 0x0 0x1000>;
+ status = "disabled";
+ };
+ };
+
+ apps_rsc: rsc@18200000 {
+ label = "apps_rsc";
+ compatible = "qcom,rpmh-rsc";
+ reg = <0x0 0x18200000 0x0 0x10000>,
+ <0x0 0x18210000 0x0 0x10000>,
+ <0x0 0x18220000 0x0 0x10000>;
+ reg-names = "drv-0", "drv-1", "drv-2";
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ qcom,tcs-offset = <0xd00>;
+ qcom,drv-id = <2>;
+ qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>,
+ <WAKE_TCS 3>, <CONTROL_TCS 1>;
+
+ rpmhcc: clock-controller {
+ compatible = "qcom,sm8350-rpmh-clk";
+ #clock-cells = <1>;
+ clock-names = "xo";
+ clocks = <&xo_board>;
+ };
+
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+};
projects / platform / kernel / linux-rpi.git / commitdiff