-- --
-- B o d y --
-- --
--- Copyright (C) 2015, Free Software Foundation, Inc. --
+-- Copyright (C) 2014-2015, Free Software Foundation, Inc. --
-- --
-- GNAT is free software; you can redistribute it and/or modify it under --
-- terms of the GNU General Public License as published by the Free Soft- --
with Einfo; use Einfo;
with Elists; use Elists;
with Exp_Util; use Exp_Util;
+with Lib; use Lib;
with Namet; use Namet;
with Nlists; use Nlists;
with Nmake; use Nmake;
+with Opt; use Opt;
with Rtsfind; use Rtsfind;
+with Sem; use Sem;
with Sem_Aux; use Sem_Aux;
+with Sem_Mech; use Sem_Mech;
+with Sem_Res; use Sem_Res;
with Sem_Util; use Sem_Util;
with Sinfo; use Sinfo;
with Snames; use Snames;
Table_Low_Bound => 1,
Table_Initial => 100,
Table_Increment => 200,
- Table_Name => "Subps");
+ Table_Name => "Unnest_Subps");
-- Records the subprograms in the nest whose outer subprogram is Subp
type Call_Entry is record
- N : Node_Id;
+ N : Node_Id;
-- The actual call
From : Entity_Id;
Table_Low_Bound => 1,
Table_Initial => 100,
Table_Increment => 200,
- Table_Name => "Calls");
+ Table_Name => "Unnest_Calls");
-- Records each call within the outer subprogram and all nested subprograms
-- that are to other subprograms nested within the outer subprogram. These
-- are the calls that may need an additional parameter.
end if;
Set_Has_Uplevel_Reference (Entity (N));
+ Set_Has_Uplevel_Reference (Subp);
end Note_Uplevel_Reference;
-----------------------
-----------------------
procedure Unnest_Subprogram (Subp : Entity_Id; Subp_Body : Node_Id) is
- function Get_AREC_String (Lev : Pos) return String;
+ function AREC_String (Lev : Pos) return String;
-- Given a level value, 1, 2, ... returns the string AREC, AREC2, ...
- function Get_Enclosing_Subp (Subp : SI_Type) return SI_Type;
+ function Enclosing_Subp (Subp : SI_Type) return SI_Type;
-- Subp is the index of a subprogram which has a Lev greater than 1.
-- This function returns the index of the enclosing subprogram which
-- will have a Lev value one less than this.
function Subp_Index (Sub : Entity_Id) return SI_Type;
-- Given the entity for a subprogram, return corresponding Subps index
- ---------------------
- -- Get_AREC_String --
- ---------------------
+ -----------------
+ -- AREC_String --
+ -----------------
- function Get_AREC_String (Lev : Pos) return String is
+ function AREC_String (Lev : Pos) return String is
begin
if Lev > 9 then
return
- Get_AREC_String (Lev / 10) & Character'Val (Lev mod 10 + 48);
+ AREC_String (Lev / 10) & Character'Val (Lev mod 10 + 48);
else
return
"AREC" & Character'Val (Lev + 48);
end if;
- end Get_AREC_String;
+ end AREC_String;
- ------------------------
- -- Get_Enclosing_Subp --
- ------------------------
+ --------------------
+ -- Enclosing_Subp --
+ --------------------
- function Get_Enclosing_Subp (Subp : SI_Type) return SI_Type is
+ function Enclosing_Subp (Subp : SI_Type) return SI_Type is
STJ : Subp_Entry renames Subps.Table (Subp);
- Ret : constant SI_Type :=
- UI_To_Int (Subps_Index (Enclosing_Subprogram (STJ.Ent)));
+ Ret : constant SI_Type := Subp_Index (Enclosing_Subprogram (STJ.Ent));
begin
pragma Assert (STJ.Lev > 1);
pragma Assert (Subps.Table (Ret).Lev = STJ.Lev - 1);
return Ret;
- end Get_Enclosing_Subp;
+ end Enclosing_Subp;
---------------
-- Get_Level --
-- Start of processing for Unnest_Subprogram
begin
+ -- At least for now, do not unnest anything but main source unit
+
+ if not In_Extended_Main_Source_Unit (Subp_Body) then
+ return;
+ end if;
+
-- First step, we must mark all nested subprograms that require a static
-- link (activation record) because either they contain explicit uplevel
-- references (as indicated by Has_Uplevel_Reference being set at this
if Nkind_In (N, N_Procedure_Call_Statement, N_Function_Call) then
Ent := Entity (Name (N));
-
- if not Is_Library_Level_Entity (Ent) then
- Calls.Append ((N, Find_Current_Subprogram, Ent));
- end if;
+ Calls.Append ((N, Find_Current_Subprogram, Ent));
-- Record a subprogram
if Nkind (N) = N_Subprogram_Body then
STJ.Bod := N;
else
- STJ.Bod := Corresponding_Body (N);
+ STJ.Bod := Parent (Parent (Corresponding_Body (N)));
+ pragma Assert (Nkind (STJ.Bod) = N_Subprogram_Body);
end if;
-- Capture Uplevel_References, and then set (uses the same
procedure Visit is new Traverse_Proc (Visit_Node);
-- Used to traverse the body of Subp, populating the tables
+ -- Start of processing for Build_Tables
+
begin
+ -- A special case, if the outer level subprogram has a separate spec
+ -- then we won't catch it in the traversal of the body. But we do
+ -- want to visit the declaration in this case!
+
+ declare
+ Dummy : Traverse_Result;
+ Decl : constant Node_Id :=
+ Parent (Declaration_Node (Corresponding_Spec (Subp_Body)));
+ pragma Assert (Nkind (Decl) = N_Subprogram_Declaration);
+ begin
+ if not Acts_As_Spec (Subp_Body) then
+ Dummy := Visit_Node (Decl);
+ end if;
+ end;
+
+ -- Traverse the body to get the rest of the subprograms and calls
+
Visit (Subp_Body);
end Build_Tables;
declare
STJ : Subp_Entry renames Subps.Table (J);
Loc : constant Source_Ptr := Sloc (STJ.Bod);
- ARS : constant String := Get_AREC_String (STJ.Lev);
+ ARS : constant String := AREC_String (STJ.Lev);
begin
if STJ.Ent = Subp then
else
STJ.ARECnF :=
Make_Defining_Identifier (Loc,
- Chars =>
- Name_Find_Str (Get_AREC_String (STJ.Lev - 1) & "F"));
+ Chars => Name_Find_Str (AREC_String (STJ.Lev - 1) & "F"));
end if;
if Has_Nested_Subprogram (STJ.Ent)
if Has_Uplevel_Reference (STJ.Ent) and then STJ.Lev > 1 then
declare
- ARS1 : constant String := Get_AREC_String (STJ.Lev - 1);
+ ARS1 : constant String := AREC_String (STJ.Lev - 1);
begin
STJ.ARECnU :=
Make_Defining_Identifier (Loc,
-- nested subprograms that have uplevel references.
if STJ.Lev > 1 and then Has_Uplevel_Reference (STJ.Ent) then
- null; -- TBD???
+
+ -- Here we need the extra formal. We do the expansion and
+ -- analysis of this manually, since it is fairly simple,
+ -- and it is not obvious how we can get what we want if we
+ -- try to use the normal Analyze circuit.
+
+ Extra_Formal : declare
+ Encl : constant SI_Type := Enclosing_Subp (J);
+ STJE : Subp_Entry renames Subps.Table (Encl);
+ -- Index and Subp_Entry for enclosing routine
+
+ Form : constant Entity_Id := STJ.ARECnF;
+ -- The formal to be added. Note that n here is one less
+ -- than the level of the subprogram itself (STJ.Ent).
+
+ Formb : Entity_Id;
+ -- If needed, this is the formal added to the body
+
+ procedure Add_Form_To_Spec (F : Entity_Id; S : Node_Id);
+ -- S is an N_Function/Procedure_Specification node, and F
+ -- is the new entity to add to this subprogramn spec.
+
+ ----------------------
+ -- Add_Form_To_Spec --
+ ----------------------
+
+ procedure Add_Form_To_Spec (F : Entity_Id; S : Node_Id) is
+ Sub : constant Entity_Id := Defining_Unit_Name (S);
+
+ begin
+ if No (First_Entity (Sub)) then
+ Set_First_Entity (Sub, F);
+
+ else
+ declare
+ LastF : constant Entity_Id := Last_Formal (Sub);
+ begin
+ if No (LastF) then
+ Set_Next_Entity (F, First_Entity (Sub));
+ Set_First_Entity (Sub, F);
+ else
+ Set_Next_Entity (F, Next_Entity (LastF));
+ Set_Next_Entity (LastF, F);
+ end if;
+ end;
+ end if;
+
+ if No (Parameter_Specifications (S)) then
+ Set_Parameter_Specifications (S, Empty_List);
+ end if;
+
+ Append_To (Parameter_Specifications (S),
+ Make_Parameter_Specification (Sloc (F),
+ Defining_Identifier => F,
+ Parameter_Type =>
+ New_Occurrence_Of (STJE.ARECnPT, Sloc (F))));
+ end Add_Form_To_Spec;
+
+ -- Start of processing for Extra_Formal
+
+ begin
+ -- Decorate the new formal entity
+
+ Set_Scope (Form, STJ.Ent);
+ Set_Ekind (Form, E_In_Parameter);
+ Set_Etype (Form, STJE.ARECnPT);
+ Set_Mechanism (Form, By_Copy);
+ Set_Never_Set_In_Source (Form, True);
+ Set_Analyzed (Form, True);
+ Set_Comes_From_Source (Form, False);
+
+ -- Case of only body present
+
+ if Acts_As_Spec (STJ.Bod) then
+ Add_Form_To_Spec (Form, Specification (STJ.Bod));
+
+ -- Case of separate spec
+
+ else
+ Formb := New_Entity (Nkind (Form), Sloc (Form));
+ Copy_Node (Form, Formb);
+ Add_Form_To_Spec (Form, Parent (STJ.Ent));
+ Add_Form_To_Spec (Formb, Specification (STJ.Bod));
+ end if;
+ end Extra_Formal;
end if;
-- Processing for subprograms that have at least one nested
Clist : List_Id;
Comp : Entity_Id;
+ Decl_ARECnT : Node_Id;
+ Decl_ARECn : Node_Id;
+ Decl_ARECnPT : Node_Id;
+ Decl_ARECnP : Node_Id;
+ -- Declaration nodes for the AREC entities we build
+
Uplevel_Entities :
array (1 .. List_Length (STJ.Urefs)) of Entity_Id;
Num_Uplevel_Entities : Nat;
-- Uplevel_Reference_Noted to avoid duplicates.
Num_Uplevel_Entities := 0;
- Elmt := First_Elmt (STJ.Urefs);
- while Present (Elmt) loop
- Ent := Entity (Node (Elmt));
-
- if not Uplevel_Reference_Noted (Ent) then
- Set_Uplevel_Reference_Noted (Ent, True);
- Num_Uplevel_Entities := Num_Uplevel_Entities + 1;
- Uplevel_Entities (Num_Uplevel_Entities) := Ent;
- end if;
- Next_Elmt (Elmt);
- Next_Elmt (Elmt);
- end loop;
+ if Present (STJ.Urefs) then
+ Elmt := First_Elmt (STJ.Urefs);
+ while Present (Elmt) loop
+ Ent := Entity (Node (Elmt));
+
+ if not Uplevel_Reference_Noted (Ent) then
+ Set_Uplevel_Reference_Noted (Ent, True);
+ Num_Uplevel_Entities := Num_Uplevel_Entities + 1;
+ Uplevel_Entities (Num_Uplevel_Entities) := Ent;
+ end if;
+
+ Next_Elmt (Elmt);
+ Next_Elmt (Elmt);
+ end loop;
+ end if;
-- Build list of component declarations for ARECnT
if STJ.Lev > 1 then
declare
STJE : Subp_Entry
- renames Subps.Table (Get_Enclosing_Subp (J));
+ renames Subps.Table (Enclosing_Subp (J));
begin
Append_To (Clist,
Chars => Chars (Uplevel_Entities (J)));
Set_Activation_Record_Component
- (Uplevel_Entities (J), Comp);
+ (Uplevel_Entities (J), Comp);
Append_To (Clist,
Make_Component_Declaration (Loc,
-- Now we can insert the AREC declarations into the body
+ -- type ARECnT is record .. end record;
+
+ Decl_ARECnT :=
+ Make_Full_Type_Declaration (Loc,
+ Defining_Identifier => STJ.ARECnT,
+ Type_Definition =>
+ Make_Record_Definition (Loc,
+ Component_List =>
+ Make_Component_List (Loc,
+ Component_Items => Clist)));
+
+ -- ARECn : aliased ARECnT;
+
+ Decl_ARECn :=
+ Make_Object_Declaration (Loc,
+ Defining_Identifier => STJ.ARECn,
+ Aliased_Present => True,
+ Object_Definition =>
+ New_Occurrence_Of (STJ.ARECnT, Loc));
+
+ -- type ARECnPT is access all ARECnT;
+
+ Decl_ARECnPT :=
+ Make_Full_Type_Declaration (Loc,
+ Defining_Identifier => STJ.ARECnPT,
+ Type_Definition =>
+ Make_Access_To_Object_Definition (Loc,
+ All_Present => True,
+ Subtype_Indication =>
+ New_Occurrence_Of (STJ.ARECnT, Loc)));
+
+ -- ARECnP : constant ARECnPT := ARECn'Access;
+
+ Decl_ARECnP :=
+ Make_Object_Declaration (Loc,
+ Defining_Identifier => STJ.ARECnP,
+ Constant_Present => True,
+ Object_Definition =>
+ New_Occurrence_Of (STJ.ARECnPT, Loc),
+ Expression =>
+ Make_Attribute_Reference (Loc,
+ Prefix =>
+ New_Occurrence_Of (STJ.ARECn, Loc),
+ Attribute_Name => Name_Access));
+
Prepend_List_To (Declarations (STJ.Bod),
- New_List (
-
- -- type ARECnT is record .. end record;
-
- Make_Full_Type_Declaration (Loc,
- Defining_Identifier => STJ.ARECnT,
- Type_Definition =>
- Make_Record_Definition (Loc,
- Component_List =>
- Make_Component_List (Loc,
- Component_Items => Clist))),
-
- -- ARECn : aliased ARECnT;
-
- Make_Object_Declaration (Loc,
- Defining_Identifier => STJ.ARECn,
- Aliased_Present => True,
- Object_Definition =>
- New_Occurrence_Of (STJ.ARECnT, Loc)),
-
- -- type ARECnPT is access all ARECnT;
-
- Make_Full_Type_Declaration (Loc,
- Defining_Identifier => STJ.ARECnPT,
- Type_Definition =>
- Make_Access_To_Object_Definition (Loc,
- All_Present => True,
- Subtype_Indication =>
- New_Occurrence_Of (STJ.ARECnT, Loc))),
-
- -- ARECnP : constant ARECnPT := ARECn'Access;
-
- Make_Object_Declaration (Loc,
- Defining_Identifier => STJ.ARECnP,
- Constant_Present => True,
- Object_Definition =>
- New_Occurrence_Of (STJ.ARECnPT, Loc),
- Expression =>
- Make_Attribute_Reference (Loc,
- Prefix =>
- New_Occurrence_Of (STJ.ARECn, Loc),
- Attribute_Name => Name_Access))));
+ New_List
+ (Decl_ARECnT, Decl_ARECn, Decl_ARECnPT, Decl_ARECnP));
+
+ -- Analyze the newly inserted declarations. Note that
+ -- we do not need to establish the relevant scope stack
+ -- entries here, because we have already set the correct
+ -- entity references, so no name resolution is required.
+
+ -- We analyze with all checks suppressed (since we do
+ -- not expect any exceptions, and also we temporarily
+ -- turn off Unested_Subprogram_Mode to avoid trying to
+ -- mark uplevel references (not needed at this stage,
+ -- and in fact causes a bit of recursive chaos).
+
+ Opt.Unnest_Subprogram_Mode := False;
+ Analyze (Decl_ARECnT, Suppress => All_Checks);
+ Analyze (Decl_ARECn, Suppress => All_Checks);
+ Analyze (Decl_ARECnPT, Suppress => All_Checks);
+ Analyze (Decl_ARECnP, Suppress => All_Checks);
+ Opt.Unnest_Subprogram_Mode := True;
-- Next step, for each uplevel referenced entity, add
-- assignment operations to set the comoponent in the
Ent : constant Entity_Id := Uplevel_Entities (J);
Loc : constant Source_Ptr := Sloc (Ent);
Dec : constant Node_Id := Declaration_Node (Ent);
+ Ins : Node_Id;
+ Asn : Node_Id;
begin
Set_Aliased_Present (Dec);
+ Set_Is_Aliased (Ent);
- Insert_After (Dec,
+ -- For parameters, we insert the assignment right
+ -- after the declaration of ARECnP. For all other
+ -- entities, we insert the assignment immediately
+ -- after the declaration of the entity.
+
+ if Is_Formal (Ent) then
+ Ins := Decl_ARECnP;
+ else
+ Ins := Dec;
+ end if;
+
+ -- Build and insert the assignment:
+ -- ARECn.nam := nam
+
+ Asn :=
Make_Assignment_Statement (Loc,
Name =>
Make_Selected_Component (Loc,
Make_Attribute_Reference (Loc,
Prefix =>
New_Occurrence_Of (Ent, Loc),
- Attribute_Name => Name_Address)));
+ Attribute_Name => Name_Address));
+
+ Insert_After (Ins, Asn);
+
+ -- Analyze the assignment statement. Again, we do
+ -- not need to establish the relevant scope stack
+ -- entries here, because we have already set the
+ -- correct entity references, so no name resolution
+ -- is required.
+
+ -- We analyze with all checks suppressed (since
+ -- we do not expect any exceptions, and also we
+ -- temporarily turn off Unested_Subprogram_Mode
+ -- to avoid trying to mark uplevel references (not
+ -- needed at this stage, and in fact causes a bit
+ -- of recursive chaos).
+
+ Opt.Unnest_Subprogram_Mode := False;
+ Analyze (Asn, Suppress => All_Checks);
+ Opt.Unnest_Subprogram_Mode := True;
end;
end loop;
+ end;
+ end if;
+ end;
+ end loop;
+ end Subp_Loop;
- -- Next step, process uplevel references
+ -- Next step, process uplevel references. This has to be done in a
+ -- separate pass, after completing the processing in Sub_Loop because we
+ -- need all the AREC declarations generated, inserted, and analyzed so
+ -- that the uplevel references can be successfully analyzed.
- Uplev_Refs : declare
- Elmt : Elmt_Id;
+ Uplev_Refs : for J in Subps.First .. Subps.Last loop
+ declare
+ STJ : Subp_Entry renames Subps.Table (J);
- begin
- -- Loop through uplevel references
+ begin
+ -- We are only interested in entries which have uplevel references
+ -- to deal with, as indicated by the Urefs list being present
- Elmt := First_Elmt (STJ.Urefs);
- while Present (Elmt) loop
- declare
- Ref : constant Node_Id := Node (Elmt);
- -- The uplevel reference itself
+ if Present (STJ.Urefs) then
+
+ -- Process uplevel references for one subprogram
- Loc : constant Source_Ptr := Sloc (Ref);
- -- Source location for the reference
+ declare
+ Elmt : Elmt_Id;
- Ent : constant Entity_Id := Entity (Ref);
- -- The referenced entity
+ begin
+ -- Loop through uplevel references
- Typ : constant Entity_Id := Etype (Ent);
- -- The type of the referenced entity
+ Elmt := First_Elmt (STJ.Urefs);
+ while Present (Elmt) loop
- Rsub : constant Entity_Id :=
- Node (Next_Elmt (Elmt));
- -- The enclosing subprogram for the reference
+ -- Skip if we have an explicit dereference. This means
+ -- that we already did the expansion. There can be
+ -- duplicates in ths STJ.Urefs list.
- RSX : constant SI_Type := Subp_Index (Rsub);
- -- Subp_Index for enclosing subprogram for ref
+ if Nkind (Node (Elmt)) = N_Explicit_Dereference then
+ goto Continue;
+ end if;
- STJR : Subp_Entry renames Subps.Table (RSX);
- -- Subp_Entry for enclosing subprogram for ref
+ -- Otherwise, rewrite this reference
- Tnn : constant Entity_Id :=
- Make_Temporary
- (Loc, 'T', Related_Node => Ref);
- -- Local pointer type for reference
+ declare
+ Ref : constant Node_Id := Node (Elmt);
+ -- The uplevel reference itself
- Pfx : Node_Id;
- Comp : Entity_Id;
- SI : SI_Type;
+ Loc : constant Source_Ptr := Sloc (Ref);
+ -- Source location for the reference
- begin
- -- First insert declaration for pointer type
+ Ent : constant Entity_Id := Entity (Ref);
+ -- The referenced entity
- -- type Tnn is access all typ;
+ Typ : constant Entity_Id := Etype (Ent);
+ -- The type of the referenced entity
- Insert_Action (Ref,
- Make_Full_Type_Declaration (Loc,
- Defining_Identifier => Tnn,
- Type_Definition =>
- Make_Access_To_Object_Definition (Loc,
- All_Present => True,
- Subtype_Indication =>
- New_Occurrence_Of (Typ, Loc))));
+ Rsub : constant Entity_Id :=
+ Node (Next_Elmt (Elmt));
+ -- The enclosing subprogram for the reference
- -- Now we need to rewrite the reference. The
- -- reference is from level STJE.Lev to level
- -- STJ.Lev. The general form of the rewritten
- -- reference for entity X is:
+ RSX : constant SI_Type := Subp_Index (Rsub);
+ -- Subp_Index for enclosing subprogram for ref
- -- Tnn!(ARECaF.ARECbU.ARECcU.ARECdU
- -- ....ARECm.X).all
+ STJR : Subp_Entry renames Subps.Table (RSX);
+ -- Subp_Entry for enclosing subprogram for ref
- -- where a,b,c,d .. m =
- -- STJR.Lev - 1, STJ.Lev - 2, .. STJ.Lev
+ Tnn : constant Entity_Id :=
+ Make_Temporary
+ (Loc, 'T', Related_Node => Ref);
+ -- Local pointer type for reference
- pragma Assert (STJR.Lev > STJ.Lev);
+ Pfx : Node_Id;
+ Comp : Entity_Id;
+ SI : SI_Type;
- -- Compute the prefix of X. Here are examples
- -- to make things clear (with parens to show
- -- groupings, the prefix is everything except
- -- the .X at the end).
+ begin
+ -- First insert declaration for pointer type
+
+ -- type Tnn is access all typ;
- -- level 2 to level 1
+ Insert_Action (Ref,
+ Make_Full_Type_Declaration (Loc,
+ Defining_Identifier => Tnn,
+ Type_Definition =>
+ Make_Access_To_Object_Definition (Loc,
+ All_Present => True,
+ Subtype_Indication =>
+ New_Occurrence_Of (Typ, Loc))));
- -- AREC1F.X
+ -- Now we need to rewrite the reference. We have a
+ -- reference is from level STJE.Lev to level STJ.Lev.
+ -- The general form of the rewritten reference for
+ -- entity X is:
- -- level 3 to level 1
+ -- Tnn!(ARECaF.ARECbU.ARECcU.ARECdU....ARECm.X).all
- -- (AREC2F.AREC1U).X
+ -- where a,b,c,d .. m =
+ -- STJR.Lev - 1, STJ.Lev - 2, .. STJ.Lev
- -- level 4 to level 1
+ pragma Assert (STJR.Lev > STJ.Lev);
- -- ((AREC3F.AREC2U).AREC1U).X
+ -- Compute the prefix of X. Here are examples to make
+ -- things clear (with parens to show groupings, the
+ -- prefix is everything except the .X at the end).
- -- level 6 to level 2
+ -- level 2 to level 1
- -- (((AREC5F.AREC4U).AREC3U).AREC2U).X
+ -- AREC1F.X
- Pfx := New_Occurrence_Of (STJR.ARECnF, Loc);
- SI := RSX;
- for L in STJ.Lev .. STJR.Lev - 2 loop
- SI := Get_Enclosing_Subp (SI);
- Pfx :=
- Make_Selected_Component (Loc,
- Prefix => Pfx,
- Selector_Name =>
- New_Occurrence_Of
- (Subps.Table (SI).ARECnU, Loc));
- end loop;
+ -- level 3 to level 1
- -- Get activation record component (must exist)
+ -- (AREC2F.AREC1U).X
- Comp := Activation_Record_Component (Ent);
- pragma Assert (Present (Comp));
+ -- level 4 to level 1
- -- Do the replacement
+ -- ((AREC3F.AREC2U).AREC1U).X
- Rewrite (Ref,
- Make_Explicit_Dereference (Loc,
- Prefix =>
- Unchecked_Convert_To (Tnn,
- Make_Selected_Component (Loc,
- Prefix => Pfx,
- Selector_Name =>
- New_Occurrence_Of (Comp, Loc)))));
+ -- level 6 to level 2
- Next_Elmt (Elmt);
- Next_Elmt (Elmt);
- end;
+ -- (((AREC5F.AREC4U).AREC3U).AREC2U).X
+
+ Pfx := New_Occurrence_Of (STJR.ARECnF, Loc);
+ SI := RSX;
+ for L in STJ.Lev .. STJR.Lev - 2 loop
+ SI := Enclosing_Subp (SI);
+ Pfx :=
+ Make_Selected_Component (Loc,
+ Prefix => Pfx,
+ Selector_Name =>
+ New_Occurrence_Of
+ (Subps.Table (SI).ARECnU, Loc));
end loop;
- end Uplev_Refs;
- end;
- end if;
- end;
- end loop;
- end Subp_Loop;
+
+ -- Get activation record component (must exist)
+
+ Comp := Activation_Record_Component (Ent);
+ pragma Assert (Present (Comp));
+
+ -- Do the replacement
+
+ Rewrite (Ref,
+ Make_Explicit_Dereference (Loc,
+ Prefix =>
+ Unchecked_Convert_To (Tnn,
+ Make_Selected_Component (Loc,
+ Prefix => Pfx,
+ Selector_Name =>
+ New_Occurrence_Of (Comp, Loc)))));
+
+ -- Analyze and resolve the new expression. We do not
+ -- need to establish the relevant scope stack entries
+ -- here, because we have already set all the correct
+ -- entity references, so no name resolution is needed.
+
+ -- We analyze with all checks suppressed (since we do
+ -- not expect any exceptions, and also we temporarily
+ -- turn off Unested_Subprogram_Mode to avoid trying to
+ -- mark uplevel references (not needed at this stage,
+ -- and in fact causes a bit of recursive chaos).
+
+ Opt.Unnest_Subprogram_Mode := False;
+ Analyze_And_Resolve (Ref, Typ, Suppress => All_Checks);
+ Opt.Unnest_Subprogram_Mode := True;
+ end;
+
+ <<Continue>>
+ Next_Elmt (Elmt);
+ Next_Elmt (Elmt);
+ end loop;
+ end;
+ end if;
+ end;
+ end loop Uplev_Refs;
-- Finally, loop through all calls adding extra actual for the
-- activation record where it is required.
- -- TBD ???
+ Adjust_Calls : for J in Calls.First .. Calls.Last loop
+
+ -- Process a single call, we are only interested in a call to a
+ -- subprogram that actually need a pointer to an activation record,
+ -- as indicated by the ARECnF entity being set. This excludes the
+ -- top level subprogram, and any subprogram not having uplevel refs.
+
+ declare
+ CTJ : Call_Entry renames Calls.Table (J);
+
+ begin
+ if Has_Uplevel_Reference (CTJ.To) and then CTJ.To /= Subp then
+ declare
+ CTJ : Call_Entry renames Calls.Table (J);
+ STF : Subp_Entry renames Subps.Table (Subp_Index (CTJ.From));
+ STT : Subp_Entry renames Subps.Table (Subp_Index (CTJ.To));
+
+ Loc : constant Source_Ptr := Sloc (CTJ.N);
+
+ Extra : Node_Id;
+ ExtraP : Node_Id;
+ SubX : SI_Type;
+ Act : Node_Id;
+
+ begin
+ -- CTJ.N is a call to a subprogram which may require
+ -- a pointer to an activation record. The subprogram
+ -- containing the call is CTJ.From and the subprogram being
+ -- called is CTJ.To, so we have a call from level STF.Lev to
+ -- level STT.Lev.
+
+ -- There are three possibilities:
+
+ -- For a call to the same level, we just pass the activation
+ -- record passed to the calling subprogram.
+
+ if STF.Lev = STT.Lev then
+ Extra := New_Occurrence_Of (STF.ARECnF, Loc);
+
+ -- For a call that goes down a level, we pass a pointer
+ -- to the activation record constructed wtihin the caller
+ -- (which may be the outer level subprogram, but also may
+ -- be a more deeply nested caller).
+
+ elsif STT.Lev = STF.Lev + 1 then
+ Extra := New_Occurrence_Of (STF.ARECnP, Loc);
+
+ -- Otherwise we must have an upcall (STT.Lev < STF.LEV),
+ -- since it is not possible to do a downcall of more than
+ -- one level.
+
+ -- For a call from level STF.Lev to level STT.Lev, we
+ -- have to find the activation record needed by the
+ -- callee. This is as follows:
+
+ -- ARECaF.ARECbU.ARECcU....ARECm
+
+ -- where a,b,c .. m =
+ -- STF.Lev - 1, STF.Lev - 2, STF.Lev - 3 .. STT.Lev
+
+ else
+ pragma Assert (STT.Lev < STF.Lev);
+
+ Extra := New_Occurrence_Of (STF.ARECnF, Loc);
+ SubX := Subp_Index (CTJ.From);
+ for K in reverse STT.Lev .. STF.Lev - 1 loop
+ SubX := Enclosing_Subp (SubX);
+ Extra :=
+ Make_Selected_Component (Loc,
+ Prefix => Extra,
+ Selector_Name =>
+ New_Occurrence_Of
+ (Subps.Table (SubX).ARECnU, Loc));
+ end loop;
+ end if;
+
+ -- Extra is the additional parameter to be added. Build a
+ -- parameter association that we can append to the actuals.
+
+ ExtraP :=
+ Make_Parameter_Association (Loc,
+ Selector_Name =>
+ New_Occurrence_Of (STT.ARECnF, Loc),
+ Explicit_Actual_Parameter => Extra);
+
+ if No (Parameter_Associations (CTJ.N)) then
+ Set_Parameter_Associations (CTJ.N, Empty_List);
+ end if;
+
+ Append (ExtraP, Parameter_Associations (CTJ.N));
+
+ -- We need to deal with the actual parameter chain as well.
+ -- The newly added parameter is always the last actual.
+
+ Act := First_Named_Actual (CTJ.N);
+
+ if No (Act) then
+ Set_First_Named_Actual (CTJ.N, Extra);
+
+ -- Here we must follow the chain and append the new entry
+
+ else
+ while Present (Next_Named_Actual (Act)) loop
+ Act := Next_Named_Actual (Act);
+ end loop;
+
+ Set_Next_Named_Actual (Act, Extra);
+ end if;
+
+ -- Analyze and resolve the new actual. We do not need to
+ -- establish the relevant scope stack entries here, because
+ -- we have already set all the correct entity references, so
+ -- no name resolution is needed.
+
+ -- We analyze with all checks suppressed (since we do not
+ -- expect any exceptions, and also we temporarily turn off
+ -- Unested_Subprogram_Mode to avoid trying to mark uplevel
+ -- references (not needed at this stage, and in fact causes
+ -- a bit of recursive chaos).
+
+ Opt.Unnest_Subprogram_Mode := False;
+ Analyze_And_Resolve
+ (Extra, Etype (STT.ARECnF), Suppress => All_Checks);
+ Opt.Unnest_Subprogram_Mode := True;
+ end;
+ end if;
+ end;
+ end loop Adjust_Calls;
return;
end Unnest_Subprogram;
projects / platform / upstream / gcc.git / commitdiff