ARM/MStar/Sigmastar Armv7 SoC support
M: Daniel Palmer <daniel@thingy.jp>
+M: Romain Perier <romain.perier@gmail.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
W: http://linux-chenxing.org/
ARM/TEXAS INSTRUMENTS K3 ARCHITECTURE
M: Nishanth Menon <nm@ti.com>
+M: Vignesh Raghavendra <vigneshr@ti.com>
M: Tero Kristo <kristo@kernel.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Supported
isc: isc@f0008000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_isc_base &pinctrl_isc_data_8bit &pinctrl_isc_data_9_10 &pinctrl_isc_data_11_12>;
- status = "okay";
};
qspi1: spi@f0024000 {
regulator-state-standby {
regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1350000>;
regulator-mode = <4>;
};
regulator-state-mem {
regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1350000>;
regulator-mode = <4>;
};
};
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_gmac0_default &pinctrl_gmac0_txck_default &pinctrl_gmac0_phy_irq>;
+ pinctrl-0 = <&pinctrl_gmac0_default
+ &pinctrl_gmac0_mdio_default
+ &pinctrl_gmac0_txck_default
+ &pinctrl_gmac0_phy_irq>;
phy-mode = "rgmii-id";
status = "okay";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_gmac1_default &pinctrl_gmac1_phy_irq>;
+ pinctrl-0 = <&pinctrl_gmac1_default
+ &pinctrl_gmac1_mdio_default
+ &pinctrl_gmac1_phy_irq>;
phy-mode = "rmii";
status = "okay";
<PIN_PA15__G0_TXEN>,
<PIN_PA30__G0_RXCK>,
<PIN_PA18__G0_RXDV>,
- <PIN_PA22__G0_MDC>,
- <PIN_PA23__G0_MDIO>,
<PIN_PA25__G0_125CK>;
+ slew-rate = <0>;
+ bias-disable;
+ };
+
+ pinctrl_gmac0_mdio_default: gmac0_mdio_default {
+ pinmux = <PIN_PA22__G0_MDC>,
+ <PIN_PA23__G0_MDIO>;
bias-disable;
};
pinctrl_gmac0_txck_default: gmac0_txck_default {
pinmux = <PIN_PA24__G0_TXCK>;
+ slew-rate = <0>;
bias-pull-up;
};
<PIN_PD25__G1_RX0>,
<PIN_PD26__G1_RX1>,
<PIN_PD27__G1_RXER>,
- <PIN_PD24__G1_RXDV>,
- <PIN_PD28__G1_MDC>,
+ <PIN_PD24__G1_RXDV>;
+ slew-rate = <0>;
+ bias-disable;
+ };
+
+ pinctrl_gmac1_mdio_default: gmac1_mdio_default {
+ pinmux = <PIN_PD28__G1_MDC>,
<PIN_PD29__G1_MDIO>;
bias-disable;
};
<PIN_PA8__SDMMC0_DAT5>,
<PIN_PA9__SDMMC0_DAT6>,
<PIN_PA10__SDMMC0_DAT7>;
+ slew-rate = <0>;
bias-pull-up;
};
pinmux = <PIN_PA0__SDMMC0_CK>,
<PIN_PA2__SDMMC0_RSTN>,
<PIN_PA11__SDMMC0_DS>;
+ slew-rate = <0>;
bias-pull-up;
};
};
<PIN_PC0__SDMMC1_DAT1>,
<PIN_PC1__SDMMC1_DAT2>,
<PIN_PC2__SDMMC1_DAT3>;
+ slew-rate = <0>;
bias-pull-up;
};
<PIN_PB28__SDMMC1_RSTN>,
<PIN_PC5__SDMMC1_1V8SEL>,
<PIN_PC4__SDMMC1_CD>;
+ slew-rate = <0>;
bias-pull-up;
};
};
<PIN_PD6__SDMMC2_DAT1>,
<PIN_PD7__SDMMC2_DAT2>,
<PIN_PD8__SDMMC2_DAT3>;
+ slew-rate = <0>;
bias-pull-up;
};
ck {
pinmux = <PIN_PD4__SDMMC2_CK>;
+ slew-rate = <0>;
bias-pull-up;
};
};
pinctrl-0 = <&pinctrl_sdmmc2_default>;
};
+&shdwc {
+ atmel,shdwc-debouncer = <976>;
+ status = "okay";
+
+ input@0 {
+ reg = <0>;
+ };
+};
+
&spdifrx {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spdifrx_default>;
panel {
compatible = "edt,etm0700g0dh6";
pinctrl-0 = <&pinctrl_display_gpio>;
+ pinctrl-names = "default";
enable-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>;
port {
regulator-name = "vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
- enable-active-high;
+ gpio = <&gpio1 2 0>;
};
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
#include <dt-bindings/pwm/pwm.h>
/ {
led-cur = /bits/ 8 <0x20>;
max-cur = /bits/ 8 <0x60>;
reg = <0>;
+ color = <LED_COLOR_ID_RED>;
};
chan@1 {
led-cur = /bits/ 8 <0x20>;
max-cur = /bits/ 8 <0x60>;
reg = <1>;
+ color = <LED_COLOR_ID_GREEN>;
};
chan@2 {
led-cur = /bits/ 8 <0x20>;
max-cur = /bits/ 8 <0x60>;
reg = <2>;
+ color = <LED_COLOR_ID_BLUE>;
};
chan@3 {
led-cur = /bits/ 8 <0x0>;
max-cur = /bits/ 8 <0x0>;
reg = <3>;
+ color = <LED_COLOR_ID_WHITE>;
};
};
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii-id";
phy-reset-gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
+ phy-handle = <&phy>;
status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy: ethernet-phy@1 {
+ reg = <1>;
+ qca,clk-out-frequency = <125000000>;
+ };
+ };
};
&hdmi {
compatible = "micron,n25q256a", "jedec,spi-nor";
spi-max-frequency = <29000000>;
spi-rx-bus-width = <4>;
- spi-tx-bus-width = <4>;
+ spi-tx-bus-width = <1>;
reg = <0>;
};
compatible = "micron,n25q256a", "jedec,spi-nor";
spi-max-frequency = <29000000>;
spi-rx-bus-width = <4>;
- spi-tx-bus-width = <4>;
+ spi-tx-bus-width = <1>;
reg = <2>;
};
};
compatible = "micron,n25q256a", "jedec,spi-nor";
spi-max-frequency = <29000000>;
spi-rx-bus-width = <4>;
- spi-tx-bus-width = <4>;
+ spi-tx-bus-width = <1>;
reg = <0>;
};
};
nand@1,0 {
compatible = "ti,omap2-nand";
- reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ reg = <1 0 4>; /* CS1, offset 0, IO size 4 */
interrupt-parent = <&gpmc>;
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
<1 IRQ_TYPE_NONE>; /* termcount */
clock-frequency = <19200000>;
};
- pxo_board {
+ pxo_board: pxo_board {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <27000000>;
};
gpu: adreno-3xx@4300000 {
- compatible = "qcom,adreno-3xx";
+ compatible = "qcom,adreno-320.2", "qcom,adreno";
reg = <0x04300000 0x20000>;
reg-names = "kgsl_3d0_reg_memory";
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "kgsl_3d0_irq";
clock-names =
- "core_clk",
- "iface_clk",
- "mem_clk",
- "mem_iface_clk";
+ "core",
+ "iface",
+ "mem",
+ "mem_iface";
clocks =
<&mmcc GFX3D_CLK>,
<&mmcc GFX3D_AHB_CLK>,
<&mmcc GFX3D_AXI_CLK>,
<&mmcc MMSS_IMEM_AHB_CLK>;
- qcom,chipid = <0x03020002>;
iommus = <&gfx3d 0
&gfx3d 1
reg-names = "dsi_pll", "dsi_phy", "dsi_phy_regulator";
clock-names = "iface_clk", "ref";
clocks = <&mmcc DSI_M_AHB_CLK>,
- <&cxo_board>;
+ <&pxo_board>;
};
#size-cells = <1>;
ranges;
+ securam: securam@e0000000 {
+ compatible = "microchip,sama7g5-securam", "atmel,sama5d2-securam", "mmio-sram";
+ reg = <0xe0000000 0x4000>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0xe0000000 0x4000>;
+ no-memory-wc;
+ status = "okay";
+ };
+
secumod: secumod@e0004000 {
compatible = "microchip,sama7g5-secumod", "atmel,sama5d2-secumod", "syscon";
reg = <0xe0004000 0x4000>;
clock-names = "td_slck", "md_slck", "main_xtal";
};
+ shdwc: shdwc@e001d010 {
+ compatible = "microchip,sama7g5-shdwc", "syscon";
+ reg = <0xe001d010 0x10>;
+ clocks = <&clk32k 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ atmel,wakeup-rtc-timer;
+ atmel,wakeup-rtt-timer;
+ status = "disabled";
+ };
+
rtt: rtt@e001d020 {
compatible = "microchip,sama7g5-rtt", "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt";
reg = <0xe001d020 0x30>;
clocks = <&clk32k 0>;
};
+ chipid@e0020000 {
+ compatible = "microchip,sama7g5-chipid";
+ reg = <0xe0020000 0x8>;
+ };
+
sdmmc0: mmc@e1204000 {
compatible = "microchip,sama7g5-sdhci", "microchip,sam9x60-sdhci";
reg = <0xe1204000 0x4000>;
};
};
+ uddrc: uddrc@e3800000 {
+ compatible = "microchip,sama7g5-uddrc";
+ reg = <0xe3800000 0x4000>;
+ status = "okay";
+ };
+
+ ddr3phy: ddr3phy@e3804000 {
+ compatible = "microchip,sama7g5-ddr3phy";
+ reg = <0xe3804000 0x1000>;
+ status = "okay";
+ };
+
gic: interrupt-controller@e8c11000 {
compatible = "arm,cortex-a7-gic";
#interrupt-cells = <3>;
* TAKE CARE WHEN MAINTAINING THIS FILE TO PROPAGATE ANY RELEVANT
* CHANGES TO vexpress-v2m.dtsi!
*/
+#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
v2m_fixed_3v3: fixed-regulator-0 {
};
bus@8000000 {
- motherboard-bus {
- model = "V2M-P1";
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 63>;
+ interrupt-map = <0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <0 1 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <0 2 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <0 3 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <0 4 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <0 5 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <0 6 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <0 7 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <0 8 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <0 9 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <0 10 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+ <0 11 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <0 12 &gic GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <0 13 &gic GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <0 14 &gic GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ <0 15 &gic GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+ <0 16 &gic GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+ <0 17 &gic GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+ <0 18 &gic GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+ <0 19 &gic GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+ <0 20 &gic GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+ <0 21 &gic GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+ <0 22 &gic GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+ <0 23 &gic GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+ <0 24 &gic GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+ <0 25 &gic GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+ <0 26 &gic GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+ <0 27 &gic GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+ <0 28 &gic GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+ <0 29 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+ <0 30 &gic GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+ <0 31 &gic GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+ <0 32 &gic GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+ <0 33 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+ <0 34 &gic GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+ <0 35 &gic GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+ <0 36 &gic GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+ <0 37 &gic GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+ <0 38 &gic GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+ <0 39 &gic GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+ <0 40 &gic GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+ <0 41 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+ <0 42 &gic GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+
+ motherboard-bus@8000000 {
arm,hbi = <0x190>;
arm,vexpress,site = <0>;
- arm,v2m-memory-map = "rs1";
compatible = "arm,vexpress,v2m-p1", "simple-bus";
#address-cells = <2>; /* SMB chipselect number and offset */
#size-cells = <1>;
- #interrupt-cells = <1>;
- ranges;
+ ranges = <0 0 0x08000000 0x04000000>,
+ <1 0 0x14000000 0x04000000>,
+ <2 0 0x18000000 0x04000000>,
+ <3 0 0x1c000000 0x04000000>,
+ <4 0 0x0c000000 0x04000000>,
+ <5 0 0x10000000 0x04000000>;
nor_flash: flash@0 {
compatible = "arm,vexpress-flash", "cfi-flash";
clock-names = "apb_pclk";
};
- mmci@50000 {
+ mmc@50000 {
compatible = "arm,pl180", "arm,primecell";
reg = <0x050000 0x1000>;
interrupts = <9>, <10>;
clock-names = "uartclk", "apb_pclk";
};
- wdt@f0000 {
+ watchdog@f0000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0x0f0000 0x1000>;
interrupts = <0>;
* TAKE CARE WHEN MAINTAINING THIS FILE TO PROPAGATE ANY RELEVANT
* CHANGES TO vexpress-v2m-rs1.dtsi!
*/
+#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
- bus@4000000 {
- motherboard {
- model = "V2M-P1";
+ bus@40000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x40000000 0x40000000 0x10000000>,
+ <0x10000000 0x10000000 0x00020000>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 63>;
+ interrupt-map = <0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <0 1 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <0 2 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <0 3 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <0 4 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <0 5 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <0 6 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <0 7 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <0 8 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <0 9 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <0 10 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+ <0 11 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <0 12 &gic GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <0 13 &gic GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <0 14 &gic GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ <0 15 &gic GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+ <0 16 &gic GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+ <0 17 &gic GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+ <0 18 &gic GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+ <0 19 &gic GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+ <0 20 &gic GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+ <0 21 &gic GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+ <0 22 &gic GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+ <0 23 &gic GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+ <0 24 &gic GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+ <0 25 &gic GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+ <0 26 &gic GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+ <0 27 &gic GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+ <0 28 &gic GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+ <0 29 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+ <0 30 &gic GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+ <0 31 &gic GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+ <0 32 &gic GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+ <0 33 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+ <0 34 &gic GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+ <0 35 &gic GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+ <0 36 &gic GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+ <0 37 &gic GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+ <0 38 &gic GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+ <0 39 &gic GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+ <0 40 &gic GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+ <0 41 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+ <0 42 &gic GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+
+ motherboard-bus@40000000 {
arm,hbi = <0x190>;
arm,vexpress,site = <0>;
compatible = "arm,vexpress,v2m-p1", "simple-bus";
#address-cells = <2>; /* SMB chipselect number and offset */
#size-cells = <1>;
- #interrupt-cells = <1>;
- ranges;
+ ranges = <0 0 0x40000000 0x04000000>,
+ <1 0 0x44000000 0x04000000>,
+ <2 0 0x48000000 0x04000000>,
+ <3 0 0x4c000000 0x04000000>,
+ <7 0 0x10000000 0x00020000>;
flash@0,00000000 {
compatible = "arm,vexpress-flash", "cfi-flash";
};
bus@8000000 {
- compatible = "simple-bus";
-
- #address-cells = <2>;
- #size-cells = <1>;
- ranges = <0 0 0 0x08000000 0x04000000>,
- <1 0 0 0x14000000 0x04000000>,
- <2 0 0 0x18000000 0x04000000>,
- <3 0 0 0x1c000000 0x04000000>,
- <4 0 0 0x0c000000 0x04000000>,
- <5 0 0 0x10000000 0x04000000>;
-
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 63>;
- interrupt-map = <0 0 0 &gic 0 0 4>,
- <0 0 1 &gic 0 1 4>,
- <0 0 2 &gic 0 2 4>,
- <0 0 3 &gic 0 3 4>,
- <0 0 4 &gic 0 4 4>,
- <0 0 5 &gic 0 5 4>,
- <0 0 6 &gic 0 6 4>,
- <0 0 7 &gic 0 7 4>,
- <0 0 8 &gic 0 8 4>,
- <0 0 9 &gic 0 9 4>,
- <0 0 10 &gic 0 10 4>,
- <0 0 11 &gic 0 11 4>,
- <0 0 12 &gic 0 12 4>,
- <0 0 13 &gic 0 13 4>,
- <0 0 14 &gic 0 14 4>,
- <0 0 15 &gic 0 15 4>,
- <0 0 16 &gic 0 16 4>,
- <0 0 17 &gic 0 17 4>,
- <0 0 18 &gic 0 18 4>,
- <0 0 19 &gic 0 19 4>,
- <0 0 20 &gic 0 20 4>,
- <0 0 21 &gic 0 21 4>,
- <0 0 22 &gic 0 22 4>,
- <0 0 23 &gic 0 23 4>,
- <0 0 24 &gic 0 24 4>,
- <0 0 25 &gic 0 25 4>,
- <0 0 26 &gic 0 26 4>,
- <0 0 27 &gic 0 27 4>,
- <0 0 28 &gic 0 28 4>,
- <0 0 29 &gic 0 29 4>,
- <0 0 30 &gic 0 30 4>,
- <0 0 31 &gic 0 31 4>,
- <0 0 32 &gic 0 32 4>,
- <0 0 33 &gic 0 33 4>,
- <0 0 34 &gic 0 34 4>,
- <0 0 35 &gic 0 35 4>,
- <0 0 36 &gic 0 36 4>,
- <0 0 37 &gic 0 37 4>,
- <0 0 38 &gic 0 38 4>,
- <0 0 39 &gic 0 39 4>,
- <0 0 40 &gic 0 40 4>,
- <0 0 41 &gic 0 41 4>,
- <0 0 42 &gic 0 42 4>;
+ ranges = <0x8000000 0 0x8000000 0x18000000>;
};
site2: hsb@40000000 {
};
smb: bus@8000000 {
- compatible = "simple-bus";
-
- #address-cells = <2>;
- #size-cells = <1>;
- ranges = <0 0 0 0x08000000 0x04000000>,
- <1 0 0 0x14000000 0x04000000>,
- <2 0 0 0x18000000 0x04000000>,
- <3 0 0 0x1c000000 0x04000000>,
- <4 0 0 0x0c000000 0x04000000>,
- <5 0 0 0x10000000 0x04000000>;
-
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 63>;
- interrupt-map = <0 0 0 &gic 0 0 4>,
- <0 0 1 &gic 0 1 4>,
- <0 0 2 &gic 0 2 4>,
- <0 0 3 &gic 0 3 4>,
- <0 0 4 &gic 0 4 4>,
- <0 0 5 &gic 0 5 4>,
- <0 0 6 &gic 0 6 4>,
- <0 0 7 &gic 0 7 4>,
- <0 0 8 &gic 0 8 4>,
- <0 0 9 &gic 0 9 4>,
- <0 0 10 &gic 0 10 4>,
- <0 0 11 &gic 0 11 4>,
- <0 0 12 &gic 0 12 4>,
- <0 0 13 &gic 0 13 4>,
- <0 0 14 &gic 0 14 4>,
- <0 0 15 &gic 0 15 4>,
- <0 0 16 &gic 0 16 4>,
- <0 0 17 &gic 0 17 4>,
- <0 0 18 &gic 0 18 4>,
- <0 0 19 &gic 0 19 4>,
- <0 0 20 &gic 0 20 4>,
- <0 0 21 &gic 0 21 4>,
- <0 0 22 &gic 0 22 4>,
- <0 0 23 &gic 0 23 4>,
- <0 0 24 &gic 0 24 4>,
- <0 0 25 &gic 0 25 4>,
- <0 0 26 &gic 0 26 4>,
- <0 0 27 &gic 0 27 4>,
- <0 0 28 &gic 0 28 4>,
- <0 0 29 &gic 0 29 4>,
- <0 0 30 &gic 0 30 4>,
- <0 0 31 &gic 0 31 4>,
- <0 0 32 &gic 0 32 4>,
- <0 0 33 &gic 0 33 4>,
- <0 0 34 &gic 0 34 4>,
- <0 0 35 &gic 0 35 4>,
- <0 0 36 &gic 0 36 4>,
- <0 0 37 &gic 0 37 4>,
- <0 0 38 &gic 0 38 4>,
- <0 0 39 &gic 0 39 4>,
- <0 0 40 &gic 0 40 4>,
- <0 0 41 &gic 0 41 4>,
- <0 0 42 &gic 0 42 4>;
+ ranges = <0x8000000 0 0x8000000 0x18000000>;
};
site2: hsb@40000000 {
};
smb: bus@8000000 {
- compatible = "simple-bus";
-
- #address-cells = <2>;
- #size-cells = <1>;
- ranges = <0 0 0x08000000 0x04000000>,
- <1 0 0x14000000 0x04000000>,
- <2 0 0x18000000 0x04000000>,
- <3 0 0x1c000000 0x04000000>,
- <4 0 0x0c000000 0x04000000>,
- <5 0 0x10000000 0x04000000>;
-
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 63>;
- interrupt-map = <0 0 0 &gic 0 0 4>,
- <0 0 1 &gic 0 1 4>,
- <0 0 2 &gic 0 2 4>,
- <0 0 3 &gic 0 3 4>,
- <0 0 4 &gic 0 4 4>,
- <0 0 5 &gic 0 5 4>,
- <0 0 6 &gic 0 6 4>,
- <0 0 7 &gic 0 7 4>,
- <0 0 8 &gic 0 8 4>,
- <0 0 9 &gic 0 9 4>,
- <0 0 10 &gic 0 10 4>,
- <0 0 11 &gic 0 11 4>,
- <0 0 12 &gic 0 12 4>,
- <0 0 13 &gic 0 13 4>,
- <0 0 14 &gic 0 14 4>,
- <0 0 15 &gic 0 15 4>,
- <0 0 16 &gic 0 16 4>,
- <0 0 17 &gic 0 17 4>,
- <0 0 18 &gic 0 18 4>,
- <0 0 19 &gic 0 19 4>,
- <0 0 20 &gic 0 20 4>,
- <0 0 21 &gic 0 21 4>,
- <0 0 22 &gic 0 22 4>,
- <0 0 23 &gic 0 23 4>,
- <0 0 24 &gic 0 24 4>,
- <0 0 25 &gic 0 25 4>,
- <0 0 26 &gic 0 26 4>,
- <0 0 27 &gic 0 27 4>,
- <0 0 28 &gic 0 28 4>,
- <0 0 29 &gic 0 29 4>,
- <0 0 30 &gic 0 30 4>,
- <0 0 31 &gic 0 31 4>,
- <0 0 32 &gic 0 32 4>,
- <0 0 33 &gic 0 33 4>,
- <0 0 34 &gic 0 34 4>,
- <0 0 35 &gic 0 35 4>,
- <0 0 36 &gic 0 36 4>,
- <0 0 37 &gic 0 37 4>,
- <0 0 38 &gic 0 38 4>,
- <0 0 39 &gic 0 39 4>,
- <0 0 40 &gic 0 40 4>,
- <0 0 41 &gic 0 41 4>,
- <0 0 42 &gic 0 42 4>;
+ ranges = <0 0x8000000 0x18000000>;
};
site2: hsb@40000000 {
};
};
- smb: bus@4000000 {
- compatible = "simple-bus";
-
- #address-cells = <2>;
- #size-cells = <1>;
- ranges = <0 0 0x40000000 0x04000000>,
- <1 0 0x44000000 0x04000000>,
- <2 0 0x48000000 0x04000000>,
- <3 0 0x4c000000 0x04000000>,
- <7 0 0x10000000 0x00020000>;
-
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 63>;
- interrupt-map = <0 0 0 &gic 0 0 4>,
- <0 0 1 &gic 0 1 4>,
- <0 0 2 &gic 0 2 4>,
- <0 0 3 &gic 0 3 4>,
- <0 0 4 &gic 0 4 4>,
- <0 0 5 &gic 0 5 4>,
- <0 0 6 &gic 0 6 4>,
- <0 0 7 &gic 0 7 4>,
- <0 0 8 &gic 0 8 4>,
- <0 0 9 &gic 0 9 4>,
- <0 0 10 &gic 0 10 4>,
- <0 0 11 &gic 0 11 4>,
- <0 0 12 &gic 0 12 4>,
- <0 0 13 &gic 0 13 4>,
- <0 0 14 &gic 0 14 4>,
- <0 0 15 &gic 0 15 4>,
- <0 0 16 &gic 0 16 4>,
- <0 0 17 &gic 0 17 4>,
- <0 0 18 &gic 0 18 4>,
- <0 0 19 &gic 0 19 4>,
- <0 0 20 &gic 0 20 4>,
- <0 0 21 &gic 0 21 4>,
- <0 0 22 &gic 0 22 4>,
- <0 0 23 &gic 0 23 4>,
- <0 0 24 &gic 0 24 4>,
- <0 0 25 &gic 0 25 4>,
- <0 0 26 &gic 0 26 4>,
- <0 0 27 &gic 0 27 4>,
- <0 0 28 &gic 0 28 4>,
- <0 0 29 &gic 0 29 4>,
- <0 0 30 &gic 0 30 4>,
- <0 0 31 &gic 0 31 4>,
- <0 0 32 &gic 0 32 4>,
- <0 0 33 &gic 0 33 4>,
- <0 0 34 &gic 0 34 4>,
- <0 0 35 &gic 0 35 4>,
- <0 0 36 &gic 0 36 4>,
- <0 0 37 &gic 0 37 4>,
- <0 0 38 &gic 0 38 4>,
- <0 0 39 &gic 0 39 4>,
- <0 0 40 &gic 0 40 4>,
- <0 0 41 &gic 0 41 4>,
- <0 0 42 &gic 0 42 4>;
- };
-
site2: hsb@e0000000 {
compatible = "simple-bus";
#address-cells = <1>;
void sharpsl_save_param(void)
{
- memcpy(&sharpsl_param, param_start(PARAM_BASE), sizeof(struct sharpsl_param_info));
+ struct sharpsl_param_info *params = param_start(PARAM_BASE);
+
+ memcpy(&sharpsl_param, params, sizeof(*params));
if (sharpsl_param.comadj_keyword != COMADJ_MAGIC)
sharpsl_param.comadj=-1;
CONFIG_DRM=y
CONFIG_DRM_PANEL_ILITEK_IL9322=y
CONFIG_DRM_TVE200=y
+CONFIG_FB=y
CONFIG_LOGO=y
CONFIG_USB=y
CONFIG_USB_MON=y
CONFIG_DRM_IMX_HDMI=y
CONFIG_DRM_ETNAVIV=y
CONFIG_DRM_MXSFB=y
+CONFIG_FB=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_L4F00242T03=y
CONFIG_PINCTRL_PALMAS=y
CONFIG_PINCTRL_OWL=y
CONFIG_PINCTRL_S500=y
+CONFIG_PINCTRL_MSM=y
CONFIG_PINCTRL_APQ8064=y
CONFIG_PINCTRL_APQ8084=y
CONFIG_PINCTRL_IPQ8064=y
CONFIG_DRM_LIMA=m
CONFIG_DRM_PANFROST=m
CONFIG_DRM_ASPEED_GFX=m
+CONFIG_FB=y
CONFIG_FB_EFI=y
CONFIG_FB_WM8505=y
CONFIG_FB_SH_MOBILE_LCDC=y
CONFIG_OMAP_USB2=y
CONFIG_TI_PIPE3=y
CONFIG_TWL4030_USB=m
+CONFIG_RAS=y
CONFIG_NVMEM_IMX_OCOTP=y
CONFIG_ROCKCHIP_EFUSE=m
CONFIG_NVMEM_SUNXI_SID=y
unsigned long ddr_phy_calibration[BACKUP_DDR_PHY_CALIBRATION];
};
+/*
+ * struct at91_pm_sfrbu_offsets: registers mapping for SFRBU
+ * @pswbu: power switch BU control registers
+ */
+struct at91_pm_sfrbu_regs {
+ struct {
+ u32 key;
+ u32 ctrl;
+ u32 state;
+ u32 softsw;
+ } pswbu;
+};
+
/**
* struct at91_soc_pm - AT91 SoC power management data structure
* @config_shdwc_ws: wakeup sources configuration function for SHDWC
* @config_pmc_ws: wakeup srouces configuration function for PMC
* @ws_ids: wakup sources of_device_id array
* @data: PM data to be used on last phase of suspend
+ * @sfrbu_regs: SFRBU registers mapping
* @bu: backup unit mapped data (for backup mode)
* @memcs: memory chip select
*/
const struct of_device_id *ws_ids;
struct at91_pm_bu *bu;
struct at91_pm_data data;
+ struct at91_pm_sfrbu_regs sfrbu_regs;
void *memcs;
};
return 0;
}
+static void at91_pm_switch_ba_to_vbat(void)
+{
+ unsigned int offset = offsetof(struct at91_pm_sfrbu_regs, pswbu);
+ unsigned int val;
+
+ /* Just for safety. */
+ if (!soc_pm.data.sfrbu)
+ return;
+
+ val = readl(soc_pm.data.sfrbu + offset);
+
+ /* Already on VBAT. */
+ if (!(val & soc_pm.sfrbu_regs.pswbu.state))
+ return;
+
+ val &= ~soc_pm.sfrbu_regs.pswbu.softsw;
+ val |= soc_pm.sfrbu_regs.pswbu.key | soc_pm.sfrbu_regs.pswbu.ctrl;
+ writel(val, soc_pm.data.sfrbu + offset);
+
+ /* Wait for update. */
+ val = readl(soc_pm.data.sfrbu + offset);
+ while (val & soc_pm.sfrbu_regs.pswbu.state)
+ val = readl(soc_pm.data.sfrbu + offset);
+}
+
static void at91_pm_suspend(suspend_state_t state)
{
if (soc_pm.data.mode == AT91_PM_BACKUP) {
+ at91_pm_switch_ba_to_vbat();
+
cpu_suspend(0, at91_suspend_finish);
/* The SRAM is lost between suspend cycles */
{ /* Sentinel. */ },
};
-static __init void at91_dt_ramc(bool phy_mandatory)
+static __init int at91_dt_ramc(bool phy_mandatory)
{
struct device_node *np;
const struct of_device_id *of_id;
int idx = 0;
void *standby = NULL;
const struct ramc_info *ramc;
+ int ret;
for_each_matching_node_and_match(np, ramc_ids, &of_id) {
soc_pm.data.ramc[idx] = of_iomap(np, 0);
- if (!soc_pm.data.ramc[idx])
- panic(pr_fmt("unable to map ramc[%d] cpu registers\n"), idx);
+ if (!soc_pm.data.ramc[idx]) {
+ pr_err("unable to map ramc[%d] cpu registers\n", idx);
+ ret = -ENOMEM;
+ goto unmap_ramc;
+ }
ramc = of_id->data;
if (ramc) {
idx++;
}
- if (!idx)
- panic(pr_fmt("unable to find compatible ram controller node in dtb\n"));
+ if (!idx) {
+ pr_err("unable to find compatible ram controller node in dtb\n");
+ ret = -ENODEV;
+ goto unmap_ramc;
+ }
/* Lookup for DDR PHY node, if any. */
for_each_matching_node_and_match(np, ramc_phy_ids, &of_id) {
soc_pm.data.ramc_phy = of_iomap(np, 0);
- if (!soc_pm.data.ramc_phy)
- panic(pr_fmt("unable to map ramc phy cpu registers\n"));
+ if (!soc_pm.data.ramc_phy) {
+ pr_err("unable to map ramc phy cpu registers\n");
+ ret = -ENOMEM;
+ goto unmap_ramc;
+ }
}
- if (phy_mandatory && !soc_pm.data.ramc_phy)
- panic(pr_fmt("DDR PHY is mandatory!\n"));
+ if (phy_mandatory && !soc_pm.data.ramc_phy) {
+ pr_err("DDR PHY is mandatory!\n");
+ ret = -ENODEV;
+ goto unmap_ramc;
+ }
if (!standby) {
pr_warn("ramc no standby function available\n");
- return;
+ return 0;
}
at91_cpuidle_device.dev.platform_data = standby;
+
+ return 0;
+
+unmap_ramc:
+ while (idx)
+ iounmap(soc_pm.data.ramc[--idx]);
+
+ return ret;
}
static void at91rm9200_idle(void)
void __init at91rm9200_pm_init(void)
{
+ int ret;
+
if (!IS_ENABLED(CONFIG_SOC_AT91RM9200))
return;
soc_pm.data.standby_mode = AT91_PM_STANDBY;
soc_pm.data.suspend_mode = AT91_PM_ULP0;
- at91_dt_ramc(false);
+ ret = at91_dt_ramc(false);
+ if (ret)
+ return;
/*
* AT91RM9200 SDRAM low-power mode cannot be used with self-refresh.
static const int iomaps[] __initconst = {
[AT91_PM_ULP1] = AT91_PM_IOMAP(SHDWC),
};
+ int ret;
if (!IS_ENABLED(CONFIG_SOC_SAM9X60))
return;
at91_pm_modes_validate(modes, ARRAY_SIZE(modes));
at91_pm_modes_init(iomaps, ARRAY_SIZE(iomaps));
- at91_dt_ramc(false);
+ ret = at91_dt_ramc(false);
+ if (ret)
+ return;
+
at91_pm_init(NULL);
soc_pm.ws_ids = sam9x60_ws_ids;
void __init at91sam9_pm_init(void)
{
+ int ret;
+
if (!IS_ENABLED(CONFIG_SOC_AT91SAM9))
return;
soc_pm.data.standby_mode = AT91_PM_STANDBY;
soc_pm.data.suspend_mode = AT91_PM_ULP0;
- at91_dt_ramc(false);
+ ret = at91_dt_ramc(false);
+ if (ret)
+ return;
+
at91_pm_init(at91sam9_idle);
}
static const int modes[] __initconst = {
AT91_PM_STANDBY, AT91_PM_ULP0, AT91_PM_ULP0_FAST,
};
+ int ret;
if (!IS_ENABLED(CONFIG_SOC_SAMA5))
return;
at91_pm_modes_validate(modes, ARRAY_SIZE(modes));
- at91_dt_ramc(false);
+ ret = at91_dt_ramc(false);
+ if (ret)
+ return;
+
at91_pm_init(NULL);
}
[AT91_PM_BACKUP] = AT91_PM_IOMAP(SHDWC) |
AT91_PM_IOMAP(SFRBU),
};
+ int ret;
if (!IS_ENABLED(CONFIG_SOC_SAMA5D2))
return;
at91_pm_modes_validate(modes, ARRAY_SIZE(modes));
at91_pm_modes_init(iomaps, ARRAY_SIZE(iomaps));
- at91_dt_ramc(false);
+ ret = at91_dt_ramc(false);
+ if (ret)
+ return;
+
at91_pm_init(NULL);
soc_pm.ws_ids = sama5d2_ws_ids;
soc_pm.config_shdwc_ws = at91_sama5d2_config_shdwc_ws;
soc_pm.config_pmc_ws = at91_sama5d2_config_pmc_ws;
+
+ soc_pm.sfrbu_regs.pswbu.key = (0x4BD20C << 8);
+ soc_pm.sfrbu_regs.pswbu.ctrl = BIT(0);
+ soc_pm.sfrbu_regs.pswbu.softsw = BIT(1);
+ soc_pm.sfrbu_regs.pswbu.state = BIT(3);
}
void __init sama7_pm_init(void)
[AT91_PM_BACKUP] = AT91_PM_IOMAP(SFRBU) |
AT91_PM_IOMAP(SHDWC),
};
+ int ret;
if (!IS_ENABLED(CONFIG_SOC_SAMA7))
return;
at91_pm_modes_validate(modes, ARRAY_SIZE(modes));
- at91_dt_ramc(true);
+ ret = at91_dt_ramc(true);
+ if (ret)
+ return;
+
at91_pm_modes_init(iomaps, ARRAY_SIZE(iomaps));
at91_pm_init(NULL);
soc_pm.ws_ids = sama7g5_ws_ids;
soc_pm.config_pmc_ws = at91_sam9x60_config_pmc_ws;
+
+ soc_pm.sfrbu_regs.pswbu.key = (0x4BD20C << 8);
+ soc_pm.sfrbu_regs.pswbu.ctrl = BIT(0);
+ soc_pm.sfrbu_regs.pswbu.softsw = BIT(1);
+ soc_pm.sfrbu_regs.pswbu.state = BIT(2);
}
static int __init at91_pm_modes_select(char *str)
mov tmp1, #0
mcr p15, 0, tmp1, c7, c10, 4
+ /* Flush tlb. */
+ mov r4, #0
+ mcr p15, 0, r4, c8, c7, 0
+
+ ldr tmp1, [r0, #PM_DATA_PMC_MCKR_OFFSET]
+ str tmp1, .mckr_offset
+ ldr tmp1, [r0, #PM_DATA_PMC_VERSION]
+ str tmp1, .pmc_version
+ ldr tmp1, [r0, #PM_DATA_MEMCTRL]
+ str tmp1, .memtype
+ ldr tmp1, [r0, #PM_DATA_MODE]
+ str tmp1, .pm_mode
+
+ /*
+ * ldrne below are here to preload their address in the TLB as access
+ * to RAM may be limited while in self-refresh.
+ */
ldr tmp1, [r0, #PM_DATA_PMC]
str tmp1, .pmc_base
+ cmp tmp1, #0
+ ldrne tmp2, [tmp1, #0]
+
ldr tmp1, [r0, #PM_DATA_RAMC0]
str tmp1, .sramc_base
+ cmp tmp1, #0
+ ldrne tmp2, [tmp1, #0]
+
ldr tmp1, [r0, #PM_DATA_RAMC1]
str tmp1, .sramc1_base
+ cmp tmp1, #0
+ ldrne tmp2, [tmp1, #0]
+
+#ifndef CONFIG_SOC_SAM_V4_V5
+ /* ldrne below are here to preload their address in the TLB */
ldr tmp1, [r0, #PM_DATA_RAMC_PHY]
str tmp1, .sramc_phy_base
- ldr tmp1, [r0, #PM_DATA_MEMCTRL]
- str tmp1, .memtype
- ldr tmp1, [r0, #PM_DATA_MODE]
- str tmp1, .pm_mode
- ldr tmp1, [r0, #PM_DATA_PMC_MCKR_OFFSET]
- str tmp1, .mckr_offset
- ldr tmp1, [r0, #PM_DATA_PMC_VERSION]
- str tmp1, .pmc_version
- /* Both ldrne below are here to preload their address in the TLB */
+ cmp tmp1, #0
+ ldrne tmp2, [tmp1, #0]
+
ldr tmp1, [r0, #PM_DATA_SHDWC]
str tmp1, .shdwc
cmp tmp1, #0
ldrne tmp2, [tmp1, #0]
+
ldr tmp1, [r0, #PM_DATA_SFRBU]
str tmp1, .sfrbu
cmp tmp1, #0
ldrne tmp2, [tmp1, #0x10]
+#endif
/* Active the self-refresh mode */
at91_sramc_self_refresh_ena
#define LSR_THRE 0x20
-static void putc(const char c)
+static inline void putc(const char c)
{
int i;
*UART_THR = c;
}
-static void flush(void)
+static inline void flush(void)
{
}
imx_get_soc_revision());
imx6q_enet_phy_init();
+
+ of_platform_default_populate(NULL, NULL, NULL);
+
imx_anatop_init();
cpu_is_imx6q() ? imx6q_pm_init() : imx6dl_pm_init();
imx6q_1588_init();
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/genalloc.h>
+#include <linux/irqchip/arm-gic.h>
#include <linux/mfd/syscon.h>
#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
#include <linux/of.h>
static void imx6_pm_stby_poweroff(void)
{
+ gic_cpu_if_down(0);
imx6_set_lpm(STOP_POWER_OFF);
imx6q_suspend_finish(0);
/* REVISIT: omap1 legacy drivers still rely on this */
#include <mach/soc.h>
-/*
- * Bus address is physical address, except for OMAP-1510 Local Bus.
- * OMAP-1510 bus address is translated into a Local Bus address if the
- * OMAP bus type is lbus. We do the address translation based on the
- * device overriding the defaults used in the dma-mapping API.
- */
-
-/*
- * OMAP-1510 Local Bus address offset
- */
-#define OMAP1510_LB_OFFSET UL(0x30000000)
-
#endif
#include <linux/platform_device.h>
#include <linux/dma-map-ops.h>
#include <linux/io.h>
+#include <linux/delay.h>
#include <asm/irq.h>
#endif
-#if IS_ENABLED(CONFIG_USB_OHCI_HCD)
-
/* The dmamask must be set for OHCI to work */
static u64 ohci_dmamask = ~(u32)0;
static inline void ohci_device_init(struct omap_usb_config *pdata)
{
+ if (!IS_ENABLED(CONFIG_USB_OHCI_HCD))
+ return;
+
if (cpu_is_omap7xx())
ohci_resources[1].start = INT_7XX_USB_HHC_1;
pdata->ohci_device = &ohci_device;
pdata->ocpi_enable = &ocpi_enable;
}
-#else
-
-static inline void ohci_device_init(struct omap_usb_config *pdata)
-{
-}
-
-#endif
-
#if defined(CONFIG_USB_OTG) && defined(CONFIG_ARCH_OMAP_OTG)
static struct resource otg_resources[] = {
}
#ifdef CONFIG_ARCH_OMAP15XX
+/* OMAP-1510 OHCI has its own MMU for DMA */
+#define OMAP1510_LB_MEMSIZE 32 /* Should be same as SDRAM size */
+#define OMAP1510_LB_CLOCK_DIV 0xfffec10c
+#define OMAP1510_LB_MMU_CTL 0xfffec208
+#define OMAP1510_LB_MMU_LCK 0xfffec224
+#define OMAP1510_LB_MMU_LD_TLB 0xfffec228
+#define OMAP1510_LB_MMU_CAM_H 0xfffec22c
+#define OMAP1510_LB_MMU_CAM_L 0xfffec230
+#define OMAP1510_LB_MMU_RAM_H 0xfffec234
+#define OMAP1510_LB_MMU_RAM_L 0xfffec238
-/* ULPD_DPLL_CTRL */
-#define DPLL_IOB (1 << 13)
-#define DPLL_PLL_ENABLE (1 << 4)
-#define DPLL_LOCK (1 << 0)
+/*
+ * Bus address is physical address, except for OMAP-1510 Local Bus.
+ * OMAP-1510 bus address is translated into a Local Bus address if the
+ * OMAP bus type is lbus.
+ */
+#define OMAP1510_LB_OFFSET UL(0x30000000)
-/* ULPD_APLL_CTRL */
-#define APLL_NDPLL_SWITCH (1 << 0)
+/*
+ * OMAP-1510 specific Local Bus clock on/off
+ */
+static int omap_1510_local_bus_power(int on)
+{
+ if (on) {
+ omap_writel((1 << 1) | (1 << 0), OMAP1510_LB_MMU_CTL);
+ udelay(200);
+ } else {
+ omap_writel(0, OMAP1510_LB_MMU_CTL);
+ }
-static int omap_1510_usb_ohci_notifier(struct notifier_block *nb,
- unsigned long event, void *data)
+ return 0;
+}
+
+/*
+ * OMAP-1510 specific Local Bus initialization
+ * NOTE: This assumes 32MB memory size in OMAP1510LB_MEMSIZE.
+ * See also arch/mach-omap/memory.h for __virt_to_dma() and
+ * __dma_to_virt() which need to match with the physical
+ * Local Bus address below.
+ */
+static int omap_1510_local_bus_init(void)
{
- struct device *dev = data;
+ unsigned int tlb;
+ unsigned long lbaddr, physaddr;
+
+ omap_writel((omap_readl(OMAP1510_LB_CLOCK_DIV) & 0xfffffff8) | 0x4,
+ OMAP1510_LB_CLOCK_DIV);
+
+ /* Configure the Local Bus MMU table */
+ for (tlb = 0; tlb < OMAP1510_LB_MEMSIZE; tlb++) {
+ lbaddr = tlb * 0x00100000 + OMAP1510_LB_OFFSET;
+ physaddr = tlb * 0x00100000 + PHYS_OFFSET;
+ omap_writel((lbaddr & 0x0fffffff) >> 22, OMAP1510_LB_MMU_CAM_H);
+ omap_writel(((lbaddr & 0x003ffc00) >> 6) | 0xc,
+ OMAP1510_LB_MMU_CAM_L);
+ omap_writel(physaddr >> 16, OMAP1510_LB_MMU_RAM_H);
+ omap_writel((physaddr & 0x0000fc00) | 0x300, OMAP1510_LB_MMU_RAM_L);
+ omap_writel(tlb << 4, OMAP1510_LB_MMU_LCK);
+ omap_writel(0x1, OMAP1510_LB_MMU_LD_TLB);
+ }
- if (event != BUS_NOTIFY_ADD_DEVICE)
- return NOTIFY_DONE;
+ /* Enable the walking table */
+ omap_writel(omap_readl(OMAP1510_LB_MMU_CTL) | (1 << 3), OMAP1510_LB_MMU_CTL);
+ udelay(200);
- if (strncmp(dev_name(dev), "ohci", 4) == 0 &&
- dma_direct_set_offset(dev, PHYS_OFFSET, OMAP1510_LB_OFFSET,
- (u64)-1))
- WARN_ONCE(1, "failed to set DMA offset\n");
- return NOTIFY_OK;
+ return 0;
}
-static struct notifier_block omap_1510_usb_ohci_nb = {
- .notifier_call = omap_1510_usb_ohci_notifier,
-};
+static void omap_1510_local_bus_reset(void)
+{
+ omap_1510_local_bus_power(1);
+ omap_1510_local_bus_init();
+}
+
+/* ULPD_DPLL_CTRL */
+#define DPLL_IOB (1 << 13)
+#define DPLL_PLL_ENABLE (1 << 4)
+#define DPLL_LOCK (1 << 0)
+
+/* ULPD_APLL_CTRL */
+#define APLL_NDPLL_SWITCH (1 << 0)
static void __init omap_1510_usb_init(struct omap_usb_config *config)
{
}
#endif
-#if IS_ENABLED(CONFIG_USB_OHCI_HCD)
- if (config->register_host) {
+ if (IS_ENABLED(CONFIG_USB_OHCI_HCD) && config->register_host) {
int status;
- bus_register_notifier(&platform_bus_type,
- &omap_1510_usb_ohci_nb);
ohci_device.dev.platform_data = config;
+ dma_direct_set_offset(&ohci_device.dev, PHYS_OFFSET,
+ OMAP1510_LB_OFFSET, (u64)-1);
status = platform_device_register(&ohci_device);
if (status)
pr_debug("can't register OHCI device, %d\n", status);
/* hcd explicitly gates 48MHz */
+
+ config->lb_reset = omap_1510_local_bus_reset;
}
-#endif
}
#else
oh->flags |= HWMOD_SWSUP_SIDLE_ACT;
if (data->cfg->quirks & SYSC_QUIRK_SWSUP_MSTANDBY)
oh->flags |= HWMOD_SWSUP_MSTANDBY;
+ if (data->cfg->quirks & SYSC_QUIRK_CLKDM_NOAUTO)
+ oh->flags |= HWMOD_CLKDM_NOAUTO;
error = omap_hwmod_check_module(dev, oh, data, sysc_fields,
rev_offs, sysc_offs, syss_offs,
bus@8000000 {
compatible = "arm,vexpress,v2m-p1", "simple-bus";
- arm,v2m-memory-map = "rs1";
#address-cells = <2>; /* SMB chipselect number and offset */
#size-cells = <1>;
remote-endpoint = <&clcd_pads>;
};
};
-
- panel-timing {
- clock-frequency = <63500127>;
- hactive = <1024>;
- hback-porch = <152>;
- hfront-porch = <48>;
- hsync-len = <104>;
- vactive = <768>;
- vback-porch = <23>;
- vfront-porch = <3>;
- vsync-len = <4>;
- };
};
bus@8000000 {
- compatible = "simple-bus";
-
- #address-cells = <2>;
- #size-cells = <1>;
- ranges = <0 0 0 0x08000000 0x04000000>,
- <1 0 0 0x14000000 0x04000000>,
- <2 0 0 0x18000000 0x04000000>,
- <3 0 0 0x1c000000 0x04000000>,
- <4 0 0 0x0c000000 0x04000000>,
- <5 0 0 0x10000000 0x04000000>;
-
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 63>;
interrupt-map = <0 0 0 &gic 0 0 GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
reg = <0x0 0x2b1f0000 0x0 0x1000>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "mhu_lpri_rx",
- "mhu_hpri_rx";
#mbox-cells = <1>;
clocks = <&soc_refclk100mhz>;
clock-names = "apb_pclk";
};
bus@8000000 {
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <1>;
- ranges = <0 0 0 0x08000000 0x04000000>,
- <1 0 0 0x14000000 0x04000000>,
- <2 0 0 0x18000000 0x04000000>,
- <3 0 0 0x1c000000 0x04000000>,
- <4 0 0 0x0c000000 0x04000000>,
- <5 0 0 0x10000000 0x04000000>;
-
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 15>;
interrupt-map = <0 0 0 &gic 0 GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
};
bus@8000000 {
- motherboard-bus {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0x8000000 0 0x8000000 0x18000000>;
+
+ motherboard-bus@8000000 {
compatible = "arm,vexpress,v2p-p1", "simple-bus";
#address-cells = <2>; /* SMB chipselect number and offset */
#size-cells = <1>;
- #interrupt-cells = <1>;
- ranges;
- model = "V2M-Juno";
+ ranges = <0 0 0 0x08000000 0x04000000>,
+ <1 0 0 0x14000000 0x04000000>,
+ <2 0 0 0x18000000 0x04000000>,
+ <3 0 0 0x1c000000 0x04000000>,
+ <4 0 0 0x0c000000 0x04000000>,
+ <5 0 0 0x10000000 0x04000000>;
arm,hbi = <0x252>;
arm,vexpress,site = <0>;
- arm,v2m-memory-map = "rs1";
flash@0 {
/* 2 * 32MiB NOR Flash memory mounted on CS0 */
};
};
- mmci@50000 {
+ mmc@50000 {
compatible = "arm,pl180", "arm,primecell";
reg = <0x050000 0x1000>;
interrupts = <5>;
clock-names = "KMIREFCLK", "apb_pclk";
};
- wdt@f0000 {
+ watchdog@f0000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0x0f0000 0x10000>;
interrupts = <7>;
};
bus@8000000 {
- compatible = "simple-bus";
-
- #address-cells = <2>;
- #size-cells = <1>;
- ranges = <0 0 0 0x08000000 0x04000000>,
- <1 0 0 0x14000000 0x04000000>,
- <2 0 0 0x18000000 0x04000000>,
- <3 0 0 0x1c000000 0x04000000>,
- <4 0 0 0x0c000000 0x04000000>,
- <5 0 0 0x10000000 0x04000000>;
-
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 63>;
interrupt-map = <0 0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
*/
/ {
bus@8000000 {
- motherboard-bus {
+ motherboard-bus@8000000 {
arm,v2m-memory-map = "rs2";
iofpga-bus@300000000 {
};
bus@8000000 {
- motherboard-bus {
- arm,v2m-memory-map = "rs1";
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0x8000000 0 0x8000000 0x18000000>;
+
+ motherboard-bus@8000000 {
compatible = "arm,vexpress,v2m-p1", "simple-bus";
#address-cells = <2>; /* SMB chipselect number and offset */
#size-cells = <1>;
- #interrupt-cells = <1>;
- ranges;
+ ranges = <0 0 0 0x08000000 0x04000000>,
+ <1 0 0 0x14000000 0x04000000>,
+ <2 0 0 0x18000000 0x04000000>,
+ <3 0 0 0x1c000000 0x04000000>,
+ <4 0 0 0x0c000000 0x04000000>,
+ <5 0 0 0x10000000 0x04000000>;
flash@0 {
compatible = "arm,vexpress-flash", "cfi-flash";
clock-names = "apb_pclk";
};
- mmci@50000 {
+ mmc@50000 {
compatible = "arm,pl180", "arm,primecell";
reg = <0x050000 0x1000>;
interrupts = <9>, <10>;
clock-names = "uartclk", "apb_pclk";
};
- wdt@f0000 {
+ watchdog@f0000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0x0f0000 0x1000>;
interrupts = <0>;
};
smb: bus@8000000 {
- compatible = "simple-bus";
-
- #address-cells = <2>;
- #size-cells = <1>;
- ranges = <0 0 0 0x08000000 0x04000000>,
- <1 0 0 0x14000000 0x04000000>,
- <2 0 0 0x18000000 0x04000000>,
- <3 0 0 0x1c000000 0x04000000>,
- <4 0 0 0x0c000000 0x04000000>,
- <5 0 0 0x10000000 0x04000000>;
-
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 63>;
- interrupt-map = <0 0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 1 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 2 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 3 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 4 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 5 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 6 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 7 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 8 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 9 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 10 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 11 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 12 &gic GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 13 &gic GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 14 &gic GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 15 &gic GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 16 &gic GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 17 &gic GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 18 &gic GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 19 &gic GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 20 &gic GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 21 &gic GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 22 &gic GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 23 &gic GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 24 &gic GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 25 &gic GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 26 &gic GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 27 &gic GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 28 &gic GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 29 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 30 &gic GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 31 &gic GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 32 &gic GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 33 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 34 &gic GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 35 &gic GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 36 &gic GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 37 &gic GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 38 &gic GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 39 &gic GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 40 &gic GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 41 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 42 &gic GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+ ranges = <0x8000000 0 0x8000000 0x18000000>;
};
};
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <0>; /* fixed up by bootloader */
clocks = <&clockgen QORIQ_CLK_HWACCEL 1>;
- voltage-ranges = <1800 1800 3300 3300>;
+ voltage-ranges = <1800 1800>;
sdhci,auto-cmd12;
- broken-cd;
+ non-removable;
little-endian;
bus-width = <4>;
status = "disabled";
#size-cells = <1>;
compatible = "jedec,spi-nor";
spi-max-frequency = <80000000>;
- spi-tx-bus-width = <4>;
+ spi-tx-bus-width = <1>;
spi-rx-bus-width = <4>;
};
};
#size-cells = <1>;
compatible = "jedec,spi-nor";
spi-max-frequency = <80000000>;
- spi-tx-bus-width = <4>;
+ spi-tx-bus-width = <1>;
spi-rx-bus-width = <4>;
};
};
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <950000>;
regulator-boot-on;
+ regulator-always-on;
regulator-ramp-delay = <3125>;
nxp,dvs-run-voltage = <950000>;
nxp,dvs-standby-voltage = <850000>;
pinctrl_hog: hoggrp {
fsl,pins = <
MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1 0x40000159 /* M2_GDIS# */
- MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x40000041 /* M2_RST# */
+ MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x40000041 /* M2_RST# */
MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7 0x40000119 /* M2_OFF# */
MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x40000159 /* M2_WDIS# */
MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14 0x40000041 /* AMP GPIO1 */
#size-cells = <1>;
compatible = "jedec,spi-nor";
spi-max-frequency = <80000000>;
- spi-tx-bus-width = <4>;
+ spi-tx-bus-width = <1>;
spi-rx-bus-width = <4>;
};
};
pinctrl_hog: hoggrp {
fsl,pins = <
MX8MN_IOMUXC_NAND_CE0_B_GPIO3_IO1 0x40000159 /* M2_GDIS# */
- MX8MN_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x40000041 /* M2_RST# */
+ MX8MN_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x40000041 /* M2_RST# */
MX8MN_IOMUXC_NAND_DATA01_GPIO3_IO7 0x40000119 /* M2_OFF# */
MX8MN_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x40000159 /* M2_WDIS# */
MX8MN_IOMUXC_SAI2_RXFS_GPIO4_IO21 0x40000041 /* APP GPIO1 */
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <80000000>;
- spi-tx-bus-width = <4>;
+ spi-tx-bus-width = <1>;
spi-rx-bus-width = <4>;
};
};
#size-cells = <1>;
compatible = "micron,n25q256a", "jedec,spi-nor";
spi-max-frequency = <29000000>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <4>;
};
};
#address-cells = <1>;
#size-cells = <1>;
reg = <0>;
- spi-tx-bus-width = <4>;
+ spi-tx-bus-width = <1>;
spi-rx-bus-width = <4>;
m25p,fast-read;
spi-max-frequency = <50000000>;
#size-cells = <0>;
pon: power-on@800 {
- compatible = "qcom,pm8916-pon";
+ compatible = "qcom,pm8998-pon";
reg = <0x0800>;
+ mode-bootloader = <0x2>;
+ mode-recovery = <0x1>;
pon_pwrkey: pwrkey {
compatible = "qcom,pm8941-pwrkey";
};
};
+&pon_pwrkey {
+ status = "okay";
+};
+
+&pon_resin {
+ status = "okay";
+
+ linux,code = <KEY_VOLUMEDOWN>;
+};
+
&qupv3_id_0 {
status = "okay";
};
"Headphone Jack", "HPOL",
"Headphone Jack", "HPOR";
- #sound-dai-cells = <0>;
#address-cells = <1>;
#size-cells = <0>;
};
};
- dai-link@2 {
+ dai-link@5 {
link-name = "MultiMedia2";
- reg = <2>;
+ reg = <LPASS_DP_RX>;
cpu {
- sound-dai = <&lpass_cpu 2>;
+ sound-dai = <&lpass_cpu LPASS_DP_RX>;
};
codec {
qcom,playback-sd-lines = <0>;
};
- hdmi-primary@0 {
+ hdmi@5 {
reg = <LPASS_DP_RX>;
};
};
cpufreq_hw: cpufreq@18591000 {
compatible = "qcom,cpufreq-epss";
- reg = <0 0x18591100 0 0x900>,
- <0 0x18592100 0 0x900>,
- <0 0x18593100 0 0x900>;
+ reg = <0 0x18591000 0 0x1000>,
+ <0 0x18592000 0 0x1000>,
+ <0 0x18593000 0 0x1000>;
clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
clock-names = "xo", "alternate";
#freq-domain-cells = <1>;
compatible = "qcom,sdm660-a2noc";
reg = <0x01704000 0xc100>;
#interconnect-cells = <1>;
- clock-names = "bus", "bus_a";
+ clock-names = "bus",
+ "bus_a",
+ "ipa",
+ "ufs_axi",
+ "aggre2_ufs_axi",
+ "aggre2_usb3_axi",
+ "cfg_noc_usb2_axi";
clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>,
- <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>;
+ <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>,
+ <&rpmcc RPM_SMD_IPA_CLK>,
+ <&gcc GCC_UFS_AXI_CLK>,
+ <&gcc GCC_AGGRE2_UFS_AXI_CLK>,
+ <&gcc GCC_AGGRE2_USB3_AXI_CLK>,
+ <&gcc GCC_CFG_NOC_USB2_AXI_CLK>;
};
mnoc: interconnect@1745000 {
no-map;
};
- wlan_msa_mem: memory@8c400000 {
- reg = <0 0x8c400000 0 0x100000>;
+ ipa_fw_mem: memory@8c400000 {
+ reg = <0 0x8c400000 0 0x10000>;
no-map;
};
- gpu_mem: memory@8c515000 {
- reg = <0 0x8c515000 0 0x2000>;
+ ipa_gsi_mem: memory@8c410000 {
+ reg = <0 0x8c410000 0 0x5000>;
no-map;
};
- ipa_fw_mem: memory@8c517000 {
- reg = <0 0x8c517000 0 0x5a000>;
+ gpu_mem: memory@8c415000 {
+ reg = <0 0x8c415000 0 0x2000>;
no-map;
};
- adsp_mem: memory@8c600000 {
- reg = <0 0x8c600000 0 0x1a00000>;
+ adsp_mem: memory@8c500000 {
+ reg = <0 0x8c500000 0 0x1a00000>;
+ no-map;
+ };
+
+ wlan_msa_mem: memory@8df00000 {
+ reg = <0 0x8df00000 0 0x100000>;
no-map;
};
#include "sdm850.dtsi"
#include "pm8998.dtsi"
+/*
+ * Update following upstream (sdm845.dtsi) reserved
+ * memory mappings for firmware loading to succeed
+ * and enable the IPA device.
+ */
+/delete-node/ &ipa_fw_mem;
+/delete-node/ &ipa_gsi_mem;
+/delete-node/ &gpu_mem;
+/delete-node/ &adsp_mem;
+/delete-node/ &wlan_msa_mem;
+
/ {
model = "Lenovo Yoga C630";
compatible = "lenovo,yoga-c630", "qcom,sdm845";
};
};
+ /* Reserved memory changes for IPA */
+ reserved-memory {
+ wlan_msa_mem: memory@8c400000 {
+ reg = <0 0x8c400000 0 0x100000>;
+ no-map;
+ };
+
+ gpu_mem: memory@8c515000 {
+ reg = <0 0x8c515000 0 0x2000>;
+ no-map;
+ };
+
+ ipa_fw_mem: memory@8c517000 {
+ reg = <0 0x8c517000 0 0x5a000>;
+ no-map;
+ };
+
+ adsp_mem: memory@8c600000 {
+ reg = <0 0x8c600000 0 0x1a00000>;
+ no-map;
+ };
+ };
+
sn65dsi86_refclk: sn65dsi86-refclk {
compatible = "fixed-clock";
#clock-cells = <0>;
/* Quirks that need to be set based on detected module */
SYSC_QUIRK("aess", 0, 0, 0x10, -ENODEV, 0x40000000, 0xffffffff,
SYSC_MODULE_QUIRK_AESS),
+ /* Errata i893 handling for dra7 dcan1 and 2 */
+ SYSC_QUIRK("dcan", 0x4ae3c000, 0x20, -ENODEV, -ENODEV, 0xa3170504, 0xffffffff,
+ SYSC_QUIRK_CLKDM_NOAUTO),
SYSC_QUIRK("dcan", 0x48480000, 0x20, -ENODEV, -ENODEV, 0xa3170504, 0xffffffff,
SYSC_QUIRK_CLKDM_NOAUTO),
SYSC_QUIRK("dss", 0x4832a000, 0, 0x10, 0x14, 0x00000020, 0xffffffff,
break;
case SOC_AM3:
sysc_add_disabled(0x48310000); /* rng */
+ break;
default:
break;
}
config QCOM_SCM
tristate "Qcom SCM driver"
- depends on ARM || ARM64
+ depends on ARCH_QCOM || COMPILE_TEST
depends on HAVE_ARM_SMCCC
select RESET_CONTROLLER
config ARM_SCMI_TRANSPORT_VIRTIO
bool "SCMI transport based on VirtIO"
- depends on VIRTIO
+ depends on VIRTIO=y || VIRTIO=ARM_SCMI_PROTOCOL
select ARM_SCMI_HAVE_TRANSPORT
select ARM_SCMI_HAVE_MSG
help
if (vioch->is_rx) {
scmi_vio_feed_vq_rx(vioch, msg);
} else {
- unsigned long flags;
-
- spin_lock_irqsave(&vioch->lock, flags);
+ /* Here IRQs are assumed to be already disabled by the caller */
+ spin_lock(&vioch->lock);
list_add(&msg->list, &vioch->free_list);
- spin_unlock_irqrestore(&vioch->lock, flags);
+ spin_unlock(&vioch->lock);
}
}
static void scmi_vio_complete_cb(struct virtqueue *vqueue)
{
unsigned long ready_flags;
- unsigned long flags;
unsigned int length;
struct scmi_vio_channel *vioch;
struct scmi_vio_msg *msg;
goto unlock_ready_out;
}
- spin_lock_irqsave(&vioch->lock, flags);
+ /* IRQs already disabled here no need to irqsave */
+ spin_lock(&vioch->lock);
if (cb_enabled) {
virtqueue_disable_cb(vqueue);
cb_enabled = false;
goto unlock_out;
cb_enabled = true;
}
- spin_unlock_irqrestore(&vioch->lock, flags);
+ spin_unlock(&vioch->lock);
if (msg) {
msg->rx_len = length;
scmi_finalize_message(vioch, msg);
}
+ /*
+ * Release ready_lock and re-enable IRQs between loop iterations
+ * to allow virtio_chan_free() to possibly kick in and set the
+ * flag vioch->ready to false even in between processing of
+ * messages, so as to force outstanding messages to be ignored
+ * when system is shutting down.
+ */
spin_unlock_irqrestore(&vioch->ready_lock, ready_flags);
}
unlock_out:
- spin_unlock_irqrestore(&vioch->lock, flags);
+ spin_unlock(&vioch->lock);
unlock_ready_out:
spin_unlock_irqrestore(&vioch->ready_lock, ready_flags);
}
struct virtqueue *vqs[VIRTIO_SCMI_VQ_MAX_CNT];
/* Only one SCMI VirtiO device allowed */
- if (scmi_vdev)
- return -EINVAL;
+ if (scmi_vdev) {
+ dev_err(dev,
+ "One SCMI Virtio device was already initialized: only one allowed.\n");
+ return -EBUSY;
+ }
have_vq_rx = scmi_vio_have_vq_rx(vdev);
vq_cnt = have_vq_rx ? VIRTIO_SCMI_VQ_MAX_CNT : 1;
}
vdev->priv = channels;
- scmi_vdev = vdev;
+ /* Ensure initialized scmi_vdev is visible */
+ smp_store_mb(scmi_vdev, vdev);
return 0;
}
static void scmi_vio_remove(struct virtio_device *vdev)
{
+ /*
+ * Once we get here, virtio_chan_free() will have already been called by
+ * the SCMI core for any existing channel and, as a consequence, all the
+ * virtio channels will have been already marked NOT ready, causing any
+ * outstanding message on any vqueue to be ignored by complete_cb: now
+ * we can just stop processing buffers and destroy the vqueues.
+ */
vdev->config->reset(vdev);
vdev->config->del_vqs(vdev);
- scmi_vdev = NULL;
+ /* Ensure scmi_vdev is visible as NULL */
+ smp_store_mb(scmi_vdev, NULL);
}
static int scmi_vio_validate(struct virtio_device *vdev)
return register_virtio_driver(&virtio_scmi_driver);
}
-static void __exit virtio_scmi_exit(void)
+static void virtio_scmi_exit(void)
{
unregister_virtio_driver(&virtio_scmi_driver);
}
if (ehdr->e_phnum < 2)
return ERR_PTR(-EINVAL);
- if (phdrs[0].p_type == PT_LOAD || phdrs[1].p_type == PT_LOAD)
+ if (phdrs[0].p_type == PT_LOAD)
return ERR_PTR(-EINVAL);
if ((phdrs[1].p_flags & QCOM_MDT_TYPE_MASK) != QCOM_MDT_TYPE_HASH)
/* Feed the soc specific unique data into entropy pool */
add_device_randomness(info, item_size);
- platform_set_drvdata(pdev, qs->soc_dev);
+ platform_set_drvdata(pdev, qs);
return 0;
}
writel_relaxed(v, reset->prm->base + reset->prm->data->rstctrl);
spin_unlock_irqrestore(&reset->lock, flags);
- if (!has_rstst)
- goto exit;
+ /* wait for the reset bit to clear */
+ ret = readl_relaxed_poll_timeout_atomic(reset->prm->base +
+ reset->prm->data->rstctrl,
+ v, !(v & BIT(id)), 1,
+ OMAP_RESET_MAX_WAIT);
+ if (ret)
+ pr_err("%s: timedout waiting for %s:%lu\n", __func__,
+ reset->prm->data->name, id);
/* wait for the status to be set */
- ret = readl_relaxed_poll_timeout_atomic(reset->prm->base +
+ if (has_rstst) {
+ ret = readl_relaxed_poll_timeout_atomic(reset->prm->base +
reset->prm->data->rstst,
v, v & BIT(st_bit), 1,
OMAP_RESET_MAX_WAIT);
- if (ret)
- pr_err("%s: timedout waiting for %s:%lu\n", __func__,
- reset->prm->data->name, id);
+ if (ret)
+ pr_err("%s: timedout waiting for %s:%lu\n", __func__,
+ reset->prm->data->name, id);
+ }
-exit:
- if (reset->clkdm) {
- /* At least dra7 iva needs a delay before clkdm idle */
- if (has_rstst)
- udelay(1);
+ if (reset->clkdm)
pdata->clkdm_allow_idle(reset->clkdm);
- }
return ret;
}
unsigned int nr_pages = 1 << order, i;
struct page **pages;
- pages = kcalloc(nr_pages, sizeof(pages), GFP_KERNEL);
+ pages = kcalloc(nr_pages, sizeof(*pages), GFP_KERNEL);
if (!pages) {
rc = -ENOMEM;
goto err;
#include <mach/usb.h>
-/* OMAP-1510 OHCI has its own MMU for DMA */
-#define OMAP1510_LB_MEMSIZE 32 /* Should be same as SDRAM size */
-#define OMAP1510_LB_CLOCK_DIV 0xfffec10c
-#define OMAP1510_LB_MMU_CTL 0xfffec208
-#define OMAP1510_LB_MMU_LCK 0xfffec224
-#define OMAP1510_LB_MMU_LD_TLB 0xfffec228
-#define OMAP1510_LB_MMU_CAM_H 0xfffec22c
-#define OMAP1510_LB_MMU_CAM_L 0xfffec230
-#define OMAP1510_LB_MMU_RAM_H 0xfffec234
-#define OMAP1510_LB_MMU_RAM_L 0xfffec238
-
#define DRIVER_DESC "OHCI OMAP driver"
struct ohci_omap_priv {
return 0;
}
-#ifdef CONFIG_ARCH_OMAP15XX
-/*
- * OMAP-1510 specific Local Bus clock on/off
- */
-static int omap_1510_local_bus_power(int on)
-{
- if (on) {
- omap_writel((1 << 1) | (1 << 0), OMAP1510_LB_MMU_CTL);
- udelay(200);
- } else {
- omap_writel(0, OMAP1510_LB_MMU_CTL);
- }
-
- return 0;
-}
-
-/*
- * OMAP-1510 specific Local Bus initialization
- * NOTE: This assumes 32MB memory size in OMAP1510LB_MEMSIZE.
- * See also arch/mach-omap/memory.h for __virt_to_dma() and
- * __dma_to_virt() which need to match with the physical
- * Local Bus address below.
- */
-static int omap_1510_local_bus_init(void)
-{
- unsigned int tlb;
- unsigned long lbaddr, physaddr;
-
- omap_writel((omap_readl(OMAP1510_LB_CLOCK_DIV) & 0xfffffff8) | 0x4,
- OMAP1510_LB_CLOCK_DIV);
-
- /* Configure the Local Bus MMU table */
- for (tlb = 0; tlb < OMAP1510_LB_MEMSIZE; tlb++) {
- lbaddr = tlb * 0x00100000 + OMAP1510_LB_OFFSET;
- physaddr = tlb * 0x00100000 + PHYS_OFFSET;
- omap_writel((lbaddr & 0x0fffffff) >> 22, OMAP1510_LB_MMU_CAM_H);
- omap_writel(((lbaddr & 0x003ffc00) >> 6) | 0xc,
- OMAP1510_LB_MMU_CAM_L);
- omap_writel(physaddr >> 16, OMAP1510_LB_MMU_RAM_H);
- omap_writel((physaddr & 0x0000fc00) | 0x300, OMAP1510_LB_MMU_RAM_L);
- omap_writel(tlb << 4, OMAP1510_LB_MMU_LCK);
- omap_writel(0x1, OMAP1510_LB_MMU_LD_TLB);
- }
-
- /* Enable the walking table */
- omap_writel(omap_readl(OMAP1510_LB_MMU_CTL) | (1 << 3), OMAP1510_LB_MMU_CTL);
- udelay(200);
-
- return 0;
-}
-#else
-#define omap_1510_local_bus_power(x) {}
-#define omap_1510_local_bus_init() {}
-#endif
-
#ifdef CONFIG_USB_OTG
static void start_hnp(struct ohci_hcd *ohci)
omap_ohci_clock_power(priv, 1);
- if (cpu_is_omap15xx()) {
- omap_1510_local_bus_power(1);
- omap_1510_local_bus_init();
- }
+ if (config->lb_reset)
+ config->lb_reset();
ret = ohci_setup(hcd);
if (ret < 0)
u32 (*usb2_init)(unsigned nwires, unsigned alt_pingroup);
int (*ocpi_enable)(void);
+
+ void (*lb_reset)(void);
};
#endif /* __LINUX_USB_OMAP1_H */
projects / platform / kernel / linux-rpi.git / commitdiff