powerpc/83xx: gianfar_ptp: select 1588 clock source through dts file

Currently IEEE 1588 timer reference clock source is determined through
hard-coded value in gianfar_ptp driver. This patch allows to select ptp
clock source by means of device tree file node.

For instance:

	fsl,cksel = <0>;

for using external (TSEC_TMR_CLK input) high precision timer
reference clock.

Other acceptable values:

	<1> : eTSEC system clock
	<2> : eTSEC1 transmit clock
	<3> : RTC clock input

When this attribute isn't used, eTSEC system clock will serve as
IEEE 1588 timer reference clock.

Signed-off-by: Aida Mynzhasova <aida.mynzhasova@skitlab.ru>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt b/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt
index 2c6be03..eb06059 100644 (file)
--- a/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt
+++ b/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt
@@ -86,6 +86,7 @@ General Properties:
 
 Clock Properties:
 
+  - fsl,cksel        Timer reference clock source.
   - fsl,tclk-period  Timer reference clock period in nanoseconds.
   - fsl,tmr-prsc     Prescaler, divides the output clock.
   - fsl,tmr-add      Frequency compensation value.
@@ -97,7 +98,7 @@ Clock Properties:
   clock. You must choose these carefully for the clock to work right.
   Here is how to figure good values:
 
-  TimerOsc     = system clock               MHz
+  TimerOsc     = selected reference clock   MHz
   tclk_period  = desired clock period       nanoseconds
   NominalFreq  = 1000 / tclk_period         MHz
   FreqDivRatio = TimerOsc / NominalFreq     (must be greater that 1.0)
@@ -114,6 +115,18 @@ Clock Properties:
   Pulse Per Second (PPS) signal, since this will be offered to the PPS
   subsystem to synchronize the Linux clock.
 
+  "fsl,cksel" property allows to select different reference clock
+  sources:
+
+  <0> - external high precision timer reference clock (TSEC_TMR_CLK
+        input is used for this purpose);
+  <1> - eTSEC system clock;
+  <2> - eTSEC1 transmit clock;
+  <3> - RTC clock input.
+
+  When this attribute is not used, eTSEC system clock will serve as
+  IEEE 1588 timer reference clock.
+
 Example:
 
        ptp_clock@24E00 {
@@ -121,6 +134,7 @@ Example:
                reg = <0x24E00 0xB0>;
                interrupts = <12 0x8 13 0x8>;
                interrupt-parent = < &ipic >;
+               fsl,cksel       = <1>;
                fsl,tclk-period = <10>;
                fsl,tmr-prsc    = <100>;
                fsl,tmr-add     = <0x999999A4>;

diff --git a/drivers/net/ethernet/freescale/gianfar_ptp.c b/drivers/net/ethernet/freescale/gianfar_ptp.c
index 098f133..e006a09 100644 (file)
--- a/drivers/net/ethernet/freescale/gianfar_ptp.c
+++ b/drivers/net/ethernet/freescale/gianfar_ptp.c
@@ -452,7 +452,9 @@ static int gianfar_ptp_probe(struct platform_device *dev)
        err = -ENODEV;
 
        etsects->caps = ptp_gianfar_caps;
-       etsects->cksel = DEFAULT_CKSEL;
+
+       if (get_of_u32(node, "fsl,cksel", &etsects->cksel))
+               etsects->cksel = DEFAULT_CKSEL;
 
        if (get_of_u32(node, "fsl,tclk-period", &etsects->tclk_period) ||
            get_of_u32(node, "fsl,tmr-prsc", &etsects->tmr_prsc) ||