void lowpan_netdev_setup(struct net_device *dev, enum lowpan_lltypes lltype);
-int
-lowpan_header_decompress(struct sk_buff *skb, struct net_device *dev,
- const u8 *saddr, const u8 saddr_type,
- const u8 saddr_len, const u8 *daddr,
- const u8 daddr_type, const u8 daddr_len,
- u8 iphc0, u8 iphc1);
+/**
+ * lowpan_header_decompress - replace 6LoWPAN header with IPv6 header
+ *
+ * This function replaces the IPHC 6LoWPAN header which should be pointed at
+ * skb->data and skb_network_header, with the IPv6 header.
+ * It would be nice that the caller have the necessary headroom of IPv6 header
+ * and greatest Transport layer header, this would reduce the overhead for
+ * reallocate headroom.
+ *
+ * @skb: the buffer which should be manipulate.
+ * @dev: the lowpan net device pointer.
+ * @daddr: destination lladdr of mac header which is used for compression
+ * methods.
+ * @saddr: source lladdr of mac header which is used for compression
+ * methods.
+ */
+int lowpan_header_decompress(struct sk_buff *skb, const struct net_device *dev,
+ const void *daddr, const void *saddr);
/**
* lowpan_header_compress - replace IPv6 header with 6LoWPAN header
#include <linux/bitops.h>
#include <linux/if_arp.h>
#include <linux/netdevice.h>
+
#include <net/6lowpan.h>
#include <net/ipv6.h>
-#include <net/af_ieee802154.h>
+
+/* special link-layer handling */
+#include <net/mac802154.h>
#include "nhc.h"
+static inline void iphc_uncompress_eui64_lladdr(struct in6_addr *ipaddr,
+ const void *lladdr)
+{
+ /* fe:80::XXXX:XXXX:XXXX:XXXX
+ * \_________________/
+ * hwaddr
+ */
+ ipaddr->s6_addr[0] = 0xFE;
+ ipaddr->s6_addr[1] = 0x80;
+ memcpy(&ipaddr->s6_addr[8], lladdr, EUI64_ADDR_LEN);
+ /* second bit-flip (Universe/Local)
+ * is done according RFC2464
+ */
+ ipaddr->s6_addr[8] ^= 0x02;
+}
+
+static inline void iphc_uncompress_802154_lladdr(struct in6_addr *ipaddr,
+ const void *lladdr)
+{
+ const struct ieee802154_addr *addr = lladdr;
+ u8 eui64[EUI64_ADDR_LEN] = { };
+
+ switch (addr->mode) {
+ case IEEE802154_ADDR_LONG:
+ ieee802154_le64_to_be64(eui64, &addr->extended_addr);
+ iphc_uncompress_eui64_lladdr(ipaddr, eui64);
+ break;
+ case IEEE802154_ADDR_SHORT:
+ /* fe:80::ff:fe00:XXXX
+ * \__/
+ * short_addr
+ *
+ * Universe/Local bit is zero.
+ */
+ ipaddr->s6_addr[0] = 0xFE;
+ ipaddr->s6_addr[1] = 0x80;
+ ipaddr->s6_addr[11] = 0xFF;
+ ipaddr->s6_addr[12] = 0xFE;
+ ieee802154_le16_to_be16(&ipaddr->s6_addr16[7],
+ &addr->short_addr);
+ break;
+ default:
+ /* should never handled and filtered by 802154 6lowpan */
+ WARN_ON_ONCE(1);
+ break;
+ }
+}
+
/* Uncompress address function for source and
* destination address(non-multicast).
*
* address_mode is sam value or dam value.
*/
-static int uncompress_addr(struct sk_buff *skb,
- struct in6_addr *ipaddr, const u8 address_mode,
- const u8 *lladdr, const u8 addr_type,
- const u8 addr_len)
+static int uncompress_addr(struct sk_buff *skb, const struct net_device *dev,
+ struct in6_addr *ipaddr, u8 address_mode,
+ const void *lladdr)
{
bool fail;
break;
case LOWPAN_IPHC_ADDR_03:
fail = false;
- switch (addr_type) {
- case IEEE802154_ADDR_LONG:
- /* fe:80::XXXX:XXXX:XXXX:XXXX
- * \_________________/
- * hwaddr
- */
- ipaddr->s6_addr[0] = 0xFE;
- ipaddr->s6_addr[1] = 0x80;
- memcpy(&ipaddr->s6_addr[8], lladdr, addr_len);
- /* second bit-flip (Universe/Local)
- * is done according RFC2464
- */
- ipaddr->s6_addr[8] ^= 0x02;
- break;
- case IEEE802154_ADDR_SHORT:
- /* fe:80::ff:fe00:XXXX
- * \__/
- * short_addr
- *
- * Universe/Local bit is zero.
- */
- ipaddr->s6_addr[0] = 0xFE;
- ipaddr->s6_addr[1] = 0x80;
- ipaddr->s6_addr[11] = 0xFF;
- ipaddr->s6_addr[12] = 0xFE;
- ipaddr->s6_addr16[7] = htons(*((u16 *)lladdr));
+ switch (lowpan_priv(dev)->lltype) {
+ case LOWPAN_LLTYPE_IEEE802154:
+ iphc_uncompress_802154_lladdr(ipaddr, lladdr);
break;
default:
- pr_debug("Invalid addr_type set\n");
- return -EINVAL;
+ iphc_uncompress_eui64_lladdr(ipaddr, lladdr);
+ break;
}
break;
default:
/* TTL uncompression values */
static const u8 lowpan_ttl_values[] = { 0, 1, 64, 255 };
-int
-lowpan_header_decompress(struct sk_buff *skb, struct net_device *dev,
- const u8 *saddr, const u8 saddr_type,
- const u8 saddr_len, const u8 *daddr,
- const u8 daddr_type, const u8 daddr_len,
- u8 iphc0, u8 iphc1)
+int lowpan_header_decompress(struct sk_buff *skb, const struct net_device *dev,
+ const void *daddr, const void *saddr)
{
struct ipv6hdr hdr = {};
- u8 tmp, num_context = 0;
+ u8 iphc0, iphc1, tmp, num_context = 0;
int err;
raw_dump_table(__func__, "raw skb data dump uncompressed",
skb->data, skb->len);
+ if (lowpan_fetch_skb_u8(skb, &iphc0) ||
+ lowpan_fetch_skb_u8(skb, &iphc1))
+ return -EINVAL;
+
/* another if the CID flag is set */
if (iphc1 & LOWPAN_IPHC_CID) {
pr_debug("CID flag is set, increase header with one\n");
} else {
/* Source address uncompression */
pr_debug("source address stateless compression\n");
- err = uncompress_addr(skb, &hdr.saddr, tmp, saddr,
- saddr_type, saddr_len);
+ err = uncompress_addr(skb, dev, &hdr.saddr, tmp, saddr);
}
/* Check on error of previous branch */
return -EINVAL;
}
} else {
- err = uncompress_addr(skb, &hdr.daddr, tmp, daddr,
- daddr_type, daddr_len);
+ err = uncompress_addr(skb, dev, &hdr.daddr, tmp, daddr);
pr_debug("dest: stateless compression mode %d dest %pI6c\n",
tmp, &hdr.daddr);
if (err)
#include <net/ip6_route.h>
#include <net/addrconf.h>
-#include <net/af_ieee802154.h> /* to get the address type */
-
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
#include <net/bluetooth/l2cap.h>
struct l2cap_chan *chan)
{
const u8 *saddr, *daddr;
- u8 iphc0, iphc1;
struct lowpan_dev *dev;
struct lowpan_peer *peer;
saddr = peer->eui64_addr;
daddr = dev->netdev->dev_addr;
- /* at least two bytes will be used for the encoding */
- if (skb->len < 2)
- return -EINVAL;
-
- if (lowpan_fetch_skb_u8(skb, &iphc0))
- return -EINVAL;
-
- if (lowpan_fetch_skb_u8(skb, &iphc1))
- return -EINVAL;
-
- return lowpan_header_decompress(skb, netdev,
- saddr, IEEE802154_ADDR_LONG,
- EUI64_ADDR_LEN, daddr,
- IEEE802154_ADDR_LONG, EUI64_ADDR_LEN,
- iphc0, iphc1);
-
+ return lowpan_header_decompress(skb, netdev, daddr, saddr);
}
static int recv_pkt(struct sk_buff *skb, struct net_device *dev,
int lowpan_iphc_decompress(struct sk_buff *skb)
{
- struct ieee802154_addr_sa sa, da;
struct ieee802154_hdr hdr;
- u8 iphc0, iphc1;
- void *sap, *dap;
if (ieee802154_hdr_peek_addrs(skb, &hdr) < 0)
return -EINVAL;
- raw_dump_table(__func__, "raw skb data dump", skb->data, skb->len);
-
- if (lowpan_fetch_skb_u8(skb, &iphc0) ||
- lowpan_fetch_skb_u8(skb, &iphc1))
- return -EINVAL;
-
- ieee802154_addr_to_sa(&sa, &hdr.source);
- ieee802154_addr_to_sa(&da, &hdr.dest);
-
- if (sa.addr_type == IEEE802154_ADDR_SHORT)
- sap = &sa.short_addr;
- else
- sap = &sa.hwaddr;
-
- if (da.addr_type == IEEE802154_ADDR_SHORT)
- dap = &da.short_addr;
- else
- dap = &da.hwaddr;
-
- return lowpan_header_decompress(skb, skb->dev, sap, sa.addr_type,
- IEEE802154_ADDR_LEN, dap, da.addr_type,
- IEEE802154_ADDR_LEN, iphc0, iphc1);
+ return lowpan_header_decompress(skb, skb->dev, &hdr.dest, &hdr.source);
}
static lowpan_rx_result lowpan_rx_h_iphc(struct sk_buff *skb)
projects / platform / kernel / linux-rpi3.git / commitdiff