*/
#include <linux/bits.h>
+#include <linux/debugfs.h>
#include <linux/err.h>
#include <linux/i2c.h>
#include <linux/init.h>
max20743
};
+enum {
+ MAX20730_DEBUGFS_VOUT_MIN = 0,
+ MAX20730_DEBUGFS_FREQUENCY,
+ MAX20730_DEBUGFS_PG_DELAY,
+ MAX20730_DEBUGFS_INTERNAL_GAIN,
+ MAX20730_DEBUGFS_BOOT_VOLTAGE,
+ MAX20730_DEBUGFS_OUT_V_RAMP_RATE,
+ MAX20730_DEBUGFS_OC_PROTECT_MODE,
+ MAX20730_DEBUGFS_SS_TIMING,
+ MAX20730_DEBUGFS_IMAX,
+ MAX20730_DEBUGFS_OPERATION,
+ MAX20730_DEBUGFS_ON_OFF_CONFIG,
+ MAX20730_DEBUGFS_SMBALERT_MASK,
+ MAX20730_DEBUGFS_VOUT_MODE,
+ MAX20730_DEBUGFS_VOUT_COMMAND,
+ MAX20730_DEBUGFS_VOUT_MAX,
+ MAX20730_DEBUGFS_NUM_ENTRIES
+};
+
struct max20730_data {
enum chips id;
struct pmbus_driver_info info;
struct mutex lock; /* Used to protect against parallel writes */
u16 mfr_devset1;
+ u16 mfr_devset2;
+ u16 mfr_voutmin;
};
#define to_max20730_data(x) container_of(x, struct max20730_data, info)
+#define VOLT_FROM_REG(val) DIV_ROUND_CLOSEST((val), 1 << 9)
+
+#define PMBUS_SMB_ALERT_MASK 0x1B
+
+#define MAX20730_MFR_VOUT_MIN 0xd1
#define MAX20730_MFR_DEVSET1 0xd2
+#define MAX20730_MFR_DEVSET2 0xd3
+
+#define MAX20730_MFR_VOUT_MIN_MASK GENMASK(9, 0)
+#define MAX20730_MFR_VOUT_MIN_BIT_POS 0
+
+#define MAX20730_MFR_DEVSET1_RGAIN_MASK (BIT(13) | BIT(14))
+#define MAX20730_MFR_DEVSET1_OTP_MASK (BIT(11) | BIT(12))
+#define MAX20730_MFR_DEVSET1_VBOOT_MASK (BIT(8) | BIT(9))
+#define MAX20730_MFR_DEVSET1_OCP_MASK (BIT(5) | BIT(6))
+#define MAX20730_MFR_DEVSET1_FSW_MASK GENMASK(4, 2)
+#define MAX20730_MFR_DEVSET1_TSTAT_MASK (BIT(0) | BIT(1))
+
+#define MAX20730_MFR_DEVSET1_RGAIN_BIT_POS 13
+#define MAX20730_MFR_DEVSET1_OTP_BIT_POS 11
+#define MAX20730_MFR_DEVSET1_VBOOT_BIT_POS 8
+#define MAX20730_MFR_DEVSET1_OCP_BIT_POS 5
+#define MAX20730_MFR_DEVSET1_FSW_BIT_POS 2
+#define MAX20730_MFR_DEVSET1_TSTAT_BIT_POS 0
+
+#define MAX20730_MFR_DEVSET2_IMAX_MASK GENMASK(10, 8)
+#define MAX20730_MFR_DEVSET2_VRATE (BIT(6) | BIT(7))
+#define MAX20730_MFR_DEVSET2_OCPM_MASK BIT(5)
+#define MAX20730_MFR_DEVSET2_SS_MASK (BIT(0) | BIT(1))
+
+#define MAX20730_MFR_DEVSET2_IMAX_BIT_POS 8
+#define MAX20730_MFR_DEVSET2_VRATE_BIT_POS 6
+#define MAX20730_MFR_DEVSET2_OCPM_BIT_POS 5
+#define MAX20730_MFR_DEVSET2_SS_BIT_POS 0
+
+#define DEBUG_FS_DATA_MAX 16
+
+struct max20730_debugfs_data {
+ struct i2c_client *client;
+ int debugfs_entries[MAX20730_DEBUGFS_NUM_ENTRIES];
+};
+
+#define to_psu(x, y) container_of((x), \
+ struct max20730_debugfs_data, debugfs_entries[(y)])
+
+#ifdef CONFIG_DEBUG_FS
+static ssize_t max20730_debugfs_read(struct file *file, char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ int ret, len;
+ int *idxp = file->private_data;
+ int idx = *idxp;
+ struct max20730_debugfs_data *psu = to_psu(idxp, idx);
+ const struct pmbus_driver_info *info;
+ const struct max20730_data *data;
+ char tbuf[DEBUG_FS_DATA_MAX] = { 0 };
+ u16 val;
+
+ info = pmbus_get_driver_info(psu->client);
+ data = to_max20730_data(info);
+
+ switch (idx) {
+ case MAX20730_DEBUGFS_VOUT_MIN:
+ ret = VOLT_FROM_REG(data->mfr_voutmin * 10000);
+ len = snprintf(tbuf, DEBUG_FS_DATA_MAX, "%d.%d\n",
+ ret / 10000, ret % 10000);
+ break;
+ case MAX20730_DEBUGFS_FREQUENCY:
+ val = (data->mfr_devset1 & MAX20730_MFR_DEVSET1_FSW_MASK)
+ >> MAX20730_MFR_DEVSET1_FSW_BIT_POS;
+
+ if (val == 0)
+ ret = 400;
+ else if (val == 1)
+ ret = 500;
+ else if (val == 2 || val == 3)
+ ret = 600;
+ else if (val == 4)
+ ret = 700;
+ else if (val == 5)
+ ret = 800;
+ else
+ ret = 900;
+ len = snprintf(tbuf, DEBUG_FS_DATA_MAX, "%d\n", ret);
+ break;
+ case MAX20730_DEBUGFS_PG_DELAY:
+ val = (data->mfr_devset1 & MAX20730_MFR_DEVSET1_TSTAT_MASK)
+ >> MAX20730_MFR_DEVSET1_TSTAT_BIT_POS;
+
+ if (val == 0)
+ len = strlcpy(tbuf, "2000\n", DEBUG_FS_DATA_MAX);
+ else if (val == 1)
+ len = strlcpy(tbuf, "125\n", DEBUG_FS_DATA_MAX);
+ else if (val == 2)
+ len = strlcpy(tbuf, "62.5\n", DEBUG_FS_DATA_MAX);
+ else
+ len = strlcpy(tbuf, "32\n", DEBUG_FS_DATA_MAX);
+ break;
+ case MAX20730_DEBUGFS_INTERNAL_GAIN:
+ val = (data->mfr_devset1 & MAX20730_MFR_DEVSET1_RGAIN_MASK)
+ >> MAX20730_MFR_DEVSET1_RGAIN_BIT_POS;
+
+ if (data->id == max20734) {
+ /* AN6209 */
+ if (val == 0)
+ len = strlcpy(tbuf, "0.8\n", DEBUG_FS_DATA_MAX);
+ else if (val == 1)
+ len = strlcpy(tbuf, "3.2\n", DEBUG_FS_DATA_MAX);
+ else if (val == 2)
+ len = strlcpy(tbuf, "1.6\n", DEBUG_FS_DATA_MAX);
+ else
+ len = strlcpy(tbuf, "6.4\n", DEBUG_FS_DATA_MAX);
+ } else if (data->id == max20730 || data->id == max20710) {
+ /* AN6042 or AN6140 */
+ if (val == 0)
+ len = strlcpy(tbuf, "0.9\n", DEBUG_FS_DATA_MAX);
+ else if (val == 1)
+ len = strlcpy(tbuf, "3.6\n", DEBUG_FS_DATA_MAX);
+ else if (val == 2)
+ len = strlcpy(tbuf, "1.8\n", DEBUG_FS_DATA_MAX);
+ else
+ len = strlcpy(tbuf, "7.2\n", DEBUG_FS_DATA_MAX);
+ } else if (data->id == max20743) {
+ /* AN6042 */
+ if (val == 0)
+ len = strlcpy(tbuf, "0.45\n", DEBUG_FS_DATA_MAX);
+ else if (val == 1)
+ len = strlcpy(tbuf, "1.8\n", DEBUG_FS_DATA_MAX);
+ else if (val == 2)
+ len = strlcpy(tbuf, "0.9\n", DEBUG_FS_DATA_MAX);
+ else
+ len = strlcpy(tbuf, "3.6\n", DEBUG_FS_DATA_MAX);
+ } else {
+ len = strlcpy(tbuf, "Not supported\n", DEBUG_FS_DATA_MAX);
+ }
+ break;
+ case MAX20730_DEBUGFS_BOOT_VOLTAGE:
+ val = (data->mfr_devset1 & MAX20730_MFR_DEVSET1_VBOOT_MASK)
+ >> MAX20730_MFR_DEVSET1_VBOOT_BIT_POS;
+
+ if (val == 0)
+ len = strlcpy(tbuf, "0.6484\n", DEBUG_FS_DATA_MAX);
+ else if (val == 1)
+ len = strlcpy(tbuf, "0.8984\n", DEBUG_FS_DATA_MAX);
+ else if (val == 2)
+ len = strlcpy(tbuf, "1.0\n", DEBUG_FS_DATA_MAX);
+ else
+ len = strlcpy(tbuf, "Invalid\n", DEBUG_FS_DATA_MAX);
+ break;
+ case MAX20730_DEBUGFS_OUT_V_RAMP_RATE:
+ val = (data->mfr_devset2 & MAX20730_MFR_DEVSET2_VRATE)
+ >> MAX20730_MFR_DEVSET2_VRATE_BIT_POS;
+
+ if (val == 0)
+ len = strlcpy(tbuf, "4\n", DEBUG_FS_DATA_MAX);
+ else if (val == 1)
+ len = strlcpy(tbuf, "2\n", DEBUG_FS_DATA_MAX);
+ else if (val == 2)
+ len = strlcpy(tbuf, "1\n", DEBUG_FS_DATA_MAX);
+ else
+ len = strlcpy(tbuf, "Invalid\n", DEBUG_FS_DATA_MAX);
+ break;
+ case MAX20730_DEBUGFS_OC_PROTECT_MODE:
+ ret = (data->mfr_devset2 & MAX20730_MFR_DEVSET2_OCPM_MASK)
+ >> MAX20730_MFR_DEVSET2_OCPM_BIT_POS;
+ len = snprintf(tbuf, DEBUG_FS_DATA_MAX, "%d\n", ret);
+ break;
+ case MAX20730_DEBUGFS_SS_TIMING:
+ val = (data->mfr_devset2 & MAX20730_MFR_DEVSET2_SS_MASK)
+ >> MAX20730_MFR_DEVSET2_SS_BIT_POS;
+
+ if (val == 0)
+ len = strlcpy(tbuf, "0.75\n", DEBUG_FS_DATA_MAX);
+ else if (val == 1)
+ len = strlcpy(tbuf, "1.5\n", DEBUG_FS_DATA_MAX);
+ else if (val == 2)
+ len = strlcpy(tbuf, "3\n", DEBUG_FS_DATA_MAX);
+ else
+ len = strlcpy(tbuf, "6\n", DEBUG_FS_DATA_MAX);
+ break;
+ case MAX20730_DEBUGFS_IMAX:
+ ret = (data->mfr_devset2 & MAX20730_MFR_DEVSET2_IMAX_MASK)
+ >> MAX20730_MFR_DEVSET2_IMAX_BIT_POS;
+ len = snprintf(tbuf, DEBUG_FS_DATA_MAX, "%d\n", ret);
+ break;
+ case MAX20730_DEBUGFS_OPERATION:
+ ret = i2c_smbus_read_byte_data(psu->client, PMBUS_OPERATION);
+ if (ret < 0)
+ return ret;
+ len = snprintf(tbuf, DEBUG_FS_DATA_MAX, "%d\n", ret);
+ break;
+ case MAX20730_DEBUGFS_ON_OFF_CONFIG:
+ ret = i2c_smbus_read_byte_data(psu->client, PMBUS_ON_OFF_CONFIG);
+ if (ret < 0)
+ return ret;
+ len = snprintf(tbuf, DEBUG_FS_DATA_MAX, "%d\n", ret);
+ break;
+ case MAX20730_DEBUGFS_SMBALERT_MASK:
+ ret = i2c_smbus_read_word_data(psu->client,
+ PMBUS_SMB_ALERT_MASK);
+ if (ret < 0)
+ return ret;
+ len = snprintf(tbuf, DEBUG_FS_DATA_MAX, "%d\n", ret);
+ break;
+ case MAX20730_DEBUGFS_VOUT_MODE:
+ ret = i2c_smbus_read_byte_data(psu->client, PMBUS_VOUT_MODE);
+ if (ret < 0)
+ return ret;
+ len = snprintf(tbuf, DEBUG_FS_DATA_MAX, "%d\n", ret);
+ break;
+ case MAX20730_DEBUGFS_VOUT_COMMAND:
+ ret = i2c_smbus_read_word_data(psu->client, PMBUS_VOUT_COMMAND);
+ if (ret < 0)
+ return ret;
+
+ ret = VOLT_FROM_REG(ret * 10000);
+ len = snprintf(tbuf, DEBUG_FS_DATA_MAX,
+ "%d.%d\n", ret / 10000, ret % 10000);
+ break;
+ case MAX20730_DEBUGFS_VOUT_MAX:
+ ret = i2c_smbus_read_word_data(psu->client, PMBUS_VOUT_MAX);
+ if (ret < 0)
+ return ret;
+
+ ret = VOLT_FROM_REG(ret * 10000);
+ len = snprintf(tbuf, DEBUG_FS_DATA_MAX,
+ "%d.%d\n", ret / 10000, ret % 10000);
+ break;
+ default:
+ len = strlcpy(tbuf, "Invalid\n", DEBUG_FS_DATA_MAX);
+ }
+
+ return simple_read_from_buffer(buf, count, ppos, tbuf, len);
+}
+
+static const struct file_operations max20730_fops = {
+ .llseek = noop_llseek,
+ .read = max20730_debugfs_read,
+ .write = NULL,
+ .open = simple_open,
+};
+
+static int max20730_init_debugfs(struct i2c_client *client,
+ struct max20730_data *data)
+{
+ int ret, i;
+ struct dentry *debugfs;
+ struct dentry *max20730_dir;
+ struct max20730_debugfs_data *psu;
+
+ ret = i2c_smbus_read_word_data(client, MAX20730_MFR_DEVSET2);
+ if (ret < 0)
+ return ret;
+ data->mfr_devset2 = ret;
+
+ ret = i2c_smbus_read_word_data(client, MAX20730_MFR_VOUT_MIN);
+ if (ret < 0)
+ return ret;
+ data->mfr_voutmin = ret;
+
+ psu = devm_kzalloc(&client->dev, sizeof(*psu), GFP_KERNEL);
+ if (!psu)
+ return -ENOMEM;
+ psu->client = client;
+
+ debugfs = pmbus_get_debugfs_dir(client);
+ if (!debugfs)
+ return -ENOENT;
+
+ max20730_dir = debugfs_create_dir(client->name, debugfs);
+ if (!max20730_dir)
+ return -ENOENT;
+
+ for (i = 0; i < MAX20730_DEBUGFS_NUM_ENTRIES; ++i)
+ psu->debugfs_entries[i] = i;
+
+ debugfs_create_file("vout_min", 0444, max20730_dir,
+ &psu->debugfs_entries[MAX20730_DEBUGFS_VOUT_MIN],
+ &max20730_fops);
+ debugfs_create_file("frequency", 0444, max20730_dir,
+ &psu->debugfs_entries[MAX20730_DEBUGFS_FREQUENCY],
+ &max20730_fops);
+ debugfs_create_file("power_good_delay", 0444, max20730_dir,
+ &psu->debugfs_entries[MAX20730_DEBUGFS_PG_DELAY],
+ &max20730_fops);
+ debugfs_create_file("internal_gain", 0444, max20730_dir,
+ &psu->debugfs_entries[MAX20730_DEBUGFS_INTERNAL_GAIN],
+ &max20730_fops);
+ debugfs_create_file("boot_voltage", 0444, max20730_dir,
+ &psu->debugfs_entries[MAX20730_DEBUGFS_BOOT_VOLTAGE],
+ &max20730_fops);
+ debugfs_create_file("out_voltage_ramp_rate", 0444, max20730_dir,
+ &psu->debugfs_entries[MAX20730_DEBUGFS_OUT_V_RAMP_RATE],
+ &max20730_fops);
+ debugfs_create_file("oc_protection_mode", 0444, max20730_dir,
+ &psu->debugfs_entries[MAX20730_DEBUGFS_OC_PROTECT_MODE],
+ &max20730_fops);
+ debugfs_create_file("soft_start_timing", 0444, max20730_dir,
+ &psu->debugfs_entries[MAX20730_DEBUGFS_SS_TIMING],
+ &max20730_fops);
+ debugfs_create_file("imax", 0444, max20730_dir,
+ &psu->debugfs_entries[MAX20730_DEBUGFS_IMAX],
+ &max20730_fops);
+ debugfs_create_file("operation", 0444, max20730_dir,
+ &psu->debugfs_entries[MAX20730_DEBUGFS_OPERATION],
+ &max20730_fops);
+ debugfs_create_file("on_off_config", 0444, max20730_dir,
+ &psu->debugfs_entries[MAX20730_DEBUGFS_ON_OFF_CONFIG],
+ &max20730_fops);
+ debugfs_create_file("smbalert_mask", 0444, max20730_dir,
+ &psu->debugfs_entries[MAX20730_DEBUGFS_SMBALERT_MASK],
+ &max20730_fops);
+ debugfs_create_file("vout_mode", 0444, max20730_dir,
+ &psu->debugfs_entries[MAX20730_DEBUGFS_VOUT_MODE],
+ &max20730_fops);
+ debugfs_create_file("vout_command", 0444, max20730_dir,
+ &psu->debugfs_entries[MAX20730_DEBUGFS_VOUT_COMMAND],
+ &max20730_fops);
+ debugfs_create_file("vout_max", 0444, max20730_dir,
+ &psu->debugfs_entries[MAX20730_DEBUGFS_VOUT_MAX],
+ &max20730_fops);
+
+ return 0;
+}
+#else
+static int max20730_init_debugfs(struct i2c_client *client,
+ struct max20730_data *data)
+{
+ return 0;
+}
+#endif /* CONFIG_DEBUG_FS */
static const struct i2c_device_id max20730_id[];
return ret;
data->mfr_devset1 = ret;
- return pmbus_do_probe(client, &data->info);
+ ret = pmbus_do_probe(client, &data->info);
+ if (ret < 0)
+ return ret;
+
+ ret = max20730_init_debugfs(client, data);
+ if (ret)
+ dev_warn(dev, "Failed to register debugfs: %d\n",
+ ret);
+
+ return 0;
}
static const struct i2c_device_id max20730_id[] = {
projects / platform / kernel / linux-starfive.git / commitdiff