arm64: dts: qcom: sm8350-sagami: Configure SLG51000 PMIC on PDX215

Remove the mention of this PMIC from the common DTSI, as it's not
used on PDX214. Add the required nodes to support it on PDX215.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221118152028.59312-2-konrad.dybcio@linaro.org

diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx215.dts b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx215.dts
index c74c973..d4afaa3 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx215.dts
+++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx215.dts
@@ -12,6 +12,72 @@
        compatible = "sony,pdx215-generic", "qcom,sm8350";
 };
 
+&i2c13 {
+       pmic@75 {
+               compatible = "dlg,slg51000";
+               reg = <0x75>;
+               dlg,cs-gpios = <&pm8350b_gpios 1 GPIO_ACTIVE_HIGH>;
+
+               pinctrl-names = "default";
+               pinctrl-0 = <&cam_pwr_a_cs>;
+
+               regulators {
+                       slg51000_a_ldo1: ldo1 {
+                               regulator-name = "slg51000_a_ldo1";
+                               regulator-min-microvolt = <2400000>;
+                               regulator-max-microvolt = <3300000>;
+                       };
+
+                       slg51000_a_ldo2: ldo2 {
+                               regulator-name = "slg51000_a_ldo2";
+                               regulator-min-microvolt = <2400000>;
+                               regulator-max-microvolt = <3300000>;
+                       };
+
+                       slg51000_a_ldo3: ldo3 {
+                               regulator-name = "slg51000_a_ldo3";
+                               regulator-min-microvolt = <1200000>;
+                               regulator-max-microvolt = <3750000>;
+                       };
+
+                       slg51000_a_ldo4: ldo4 {
+                               regulator-name = "slg51000_a_ldo4";
+                               regulator-min-microvolt = <1200000>;
+                               regulator-max-microvolt = <3750000>;
+                       };
+
+                       slg51000_a_ldo5: ldo5 {
+                               regulator-name = "slg51000_a_ldo5";
+                               regulator-min-microvolt = <500000>;
+                               regulator-max-microvolt = <1200000>;
+                       };
+
+                       slg51000_a_ldo6: ldo6 {
+                               regulator-name = "slg51000_a_ldo6";
+                               regulator-min-microvolt = <500000>;
+                               regulator-max-microvolt = <1200000>;
+                       };
+
+                       slg51000_a_ldo7: ldo7 {
+                               regulator-name = "slg51000_a_ldo7";
+                               regulator-min-microvolt = <1200000>;
+                               regulator-max-microvolt = <3750000>;
+                       };
+               };
+       };
+};
+
+&pm8350b_gpios {
+       cam_pwr_a_cs: cam-pwr-a-cs-state {
+               pins = "gpio1";
+               function = "normal";
+               qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+               power-source = <1>;
+               drive-push-pull;
+               output-high;
+       };
+};
+
 &tlmm {
        gpio-line-names = "APPS_I2C_0_SDA", /* GPIO_0 */
                          "APPS_I2C_0_SCL",

diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
index 1f2d660..a10306d 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
@@ -3,6 +3,7 @@
  * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
  */
 
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include "sm8350.dtsi"
 #include "pm8350.dtsi"
@@ -506,7 +507,6 @@
        clock-frequency = <100000>;
 
        /* Qualcomm PM8008i/PM8008j (?) @ 8, 9, c, d */
-       /* Dialog SLG51000 CMIC @ 75 */
 };
 
 &i2c15 {