rt2800: rename adjust_freq_offset function
authorStanislaw Gruszka <sgruszka@redhat.com>
Mon, 19 Dec 2016 10:52:51 +0000 (11:52 +0100)
committerKalle Valo <kvalo@codeaurora.org>
Fri, 30 Dec 2016 11:34:18 +0000 (13:34 +0200)
We have different modes of adjusting freq offset on different chips.
Call current adjustment similarly like vendor driver - mode1 .

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
drivers/net/wireless/ralink/rt2x00/rt2800lib.c

index 4c777f1..81da771 100644 (file)
@@ -1939,7 +1939,7 @@ static void rt2800_config_lna_gain(struct rt2x00_dev *rt2x00dev,
 
 #define FREQ_OFFSET_BOUND      0x5f
 
-static void rt2800_adjust_freq_offset(struct rt2x00_dev *rt2x00dev)
+static void rt2800_freq_cal_mode1(struct rt2x00_dev *rt2x00dev)
 {
        u8 freq_offset, prev_freq_offset;
        u8 rfcsr, prev_rfcsr;
@@ -2415,7 +2415,7 @@ static void rt2800_config_channel_rf3053(struct rt2x00_dev *rt2x00dev,
        }
        rt2800_rfcsr_write(rt2x00dev, 1, rfcsr);
 
-       rt2800_adjust_freq_offset(rt2x00dev);
+       rt2800_freq_cal_mode1(rt2x00dev);
 
        if (conf_is_ht40(conf)) {
                txrx_agc_fc = rt2x00_get_field8(drv_data->calibration_bw40,
@@ -2605,7 +2605,7 @@ static void rt2800_config_channel_rf3290(struct rt2x00_dev *rt2x00dev,
                rt2x00_set_field8(&rfcsr, RFCSR49_TX, info->default_power1);
        rt2800_rfcsr_write(rt2x00dev, 49, rfcsr);
 
-       rt2800_adjust_freq_offset(rt2x00dev);
+       rt2800_freq_cal_mode1(rt2x00dev);
 
        if (rf->channel <= 14) {
                if (rf->channel == 6)
@@ -2646,7 +2646,7 @@ static void rt2800_config_channel_rf3322(struct rt2x00_dev *rt2x00dev,
        else
                rt2800_rfcsr_write(rt2x00dev, 48, info->default_power2);
 
-       rt2800_adjust_freq_offset(rt2x00dev);
+       rt2800_freq_cal_mode1(rt2x00dev);
 
        rt2800_rfcsr_read(rt2x00dev, 1, &rfcsr);
        rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 1);
@@ -2711,7 +2711,7 @@ static void rt2800_config_channel_rf53xx(struct rt2x00_dev *rt2x00dev,
        rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 1);
        rt2800_rfcsr_write(rt2x00dev, 1, rfcsr);
 
-       rt2800_adjust_freq_offset(rt2x00dev);
+       rt2800_freq_cal_mode1(rt2x00dev);
 
        if (rf->channel <= 14) {
                int idx = rf->channel-1;
@@ -3006,7 +3006,7 @@ static void rt2800_config_channel_rf55xx(struct rt2x00_dev *rt2x00dev,
        }
 
        /* TODO proper frequency adjustment */
-       rt2800_adjust_freq_offset(rt2x00dev);
+       rt2800_freq_cal_mode1(rt2x00dev);
 
        /* TODO merge with others */
        rt2800_rfcsr_read(rt2x00dev, 3, &rfcsr);
@@ -6454,7 +6454,7 @@ static void rt2800_init_rfcsr_3593(struct rt2x00_dev *rt2x00dev)
        rt2x00_set_field8(&rfcsr, RFCSR2_RESCAL_EN, 1);
        rt2800_rfcsr_write(rt2x00dev, 2, rfcsr);
 
-       rt2800_adjust_freq_offset(rt2x00dev);
+       rt2800_freq_cal_mode1(rt2x00dev);
 
        rt2800_rfcsr_read(rt2x00dev, 18, &rfcsr);
        rt2x00_set_field8(&rfcsr, RFCSR18_XO_TUNE_BYPASS, 1);
@@ -6680,7 +6680,7 @@ static void rt2800_init_rfcsr_5592(struct rt2x00_dev *rt2x00dev)
        rt2800_rfcsr_write(rt2x00dev, 2, 0x80);
        msleep(1);
 
-       rt2800_adjust_freq_offset(rt2x00dev);
+       rt2800_freq_cal_mode1(rt2x00dev);
 
        /* Enable DC filter */
        if (rt2x00_rt_rev_gte(rt2x00dev, RT5592, REV_RT5592C))