configs: am65/j72x: Set CONFIG_LOGLEVEL to 7
authorRoger Quadros <rogerq@ti.com>
Fri, 30 Oct 2020 13:00:24 +0000 (15:00 +0200)
committerLokesh Vutla <lokeshvutla@ti.com>
Sun, 15 Nov 2020 09:59:19 +0000 (15:29 +0530)
By default CONFIG_LOGLEVEL seems to be set to 4 which is
too low and doesn't show dev_info/dev_notice/dev_warn
messages on console. This has been deliberately set low
globally to be conservative setting across the board due to
primary bootloader size limitations. It is best to tune
per board config as per user needs.

On K3 we have separate SPL and u-boot configs so we
can afford to set u-boot CONFIG_LOGLEVEL to 7.

On AM65 this patch causes u-boot.img size to change from
932KB to 940KB with 1 line additional print during
MMC boot. i.e. details of Net subsystem

"Net: K3 CPSW: nuss_ver: 0x6BA00102 cpsw_ver: 0x6BA80102 ale_ver: 0x00293904 Ports:1 mdio_freq:1000000"

Similar 8KB difference was seen on J721E.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
configs/am65x_evm_a53_defconfig
configs/am65x_hs_evm_a53_defconfig
configs/j7200_evm_a72_defconfig
configs/j721e_evm_a72_defconfig
configs/j721e_hs_evm_a72_defconfig

index 8a94ad1..941073c 100644 (file)
@@ -30,6 +30,7 @@ CONFIG_SPL_LOAD_FIT_ADDRESS=0x81000000
 # CONFIG_USE_SPL_FIT_GENERATOR is not set
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_BOOTCOMMAND="run findfdt; run envboot; run init_${boot}; run boot_rprocs; run get_kern_${boot}; run get_fdt_${boot}; run get_overlay_${boot}; run run_kern"
+CONFIG_LOGLEVEL=7
 CONFIG_CONSOLE_MUX=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_STACK_R=y
index 2c7217a..7d467c1 100644 (file)
@@ -32,6 +32,7 @@ CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y
 # CONFIG_USE_SPL_FIT_GENERATOR is not set
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_BOOTCOMMAND="run findfdt; run envboot; run init_${boot}; run get_fit_${boot}; run get_overlaystring; run run_fit"
+CONFIG_LOGLEVEL=7
 CONFIG_CONSOLE_MUX=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_STACK_R=y
index 7c900b1..1d2526b 100644 (file)
@@ -31,6 +31,7 @@ CONFIG_SPL_LOAD_FIT_ADDRESS=0x81000000
 # CONFIG_USE_SPL_FIT_GENERATOR is not set
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_BOOTCOMMAND="run findfdt; run envboot; run init_${boot}; run boot_rprocs; run get_kern_${boot}; run get_fdt_${boot}; run get_overlay_${boot}; run run_kern"
+CONFIG_LOGLEVEL=7
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_STACK_R=y
index 6de8666..982e3df 100644 (file)
@@ -30,6 +30,7 @@ CONFIG_SPL_LOAD_FIT=y
 CONFIG_SPL_LOAD_FIT_ADDRESS=0x81000000
 # CONFIG_USE_SPL_FIT_GENERATOR is not set
 CONFIG_BOOTCOMMAND="run findfdt; run envboot; run init_${boot}; run boot_rprocs; run get_kern_${boot}; run get_fdt_${boot}; run get_overlay_${boot}; run run_kern"
+CONFIG_LOGLEVEL=7
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_STACK_R=y
index acbc043..28bf56e 100644 (file)
@@ -31,6 +31,7 @@ CONFIG_SPL_LOAD_FIT_ADDRESS=0x81000000
 CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y
 # CONFIG_USE_SPL_FIT_GENERATOR is not set
 CONFIG_BOOTCOMMAND="run findfdt; run envboot; run init_${boot}; run boot_rprocs; run get_fit_${boot}; run get_overlaystring; run run_fit"
+CONFIG_LOGLEVEL=7
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_STACK_R=y