.type = V4L2_CTRL_TYPE_MENU,
.name = "Light frequency filter",
.minimum = 0,
- .maximum = 2, /* 0: 0, 1: 50Hz, 2:60Hz */
+ .maximum = 2, /* 0: no flicker, 1: 50Hz, 2:60Hz, 3: auto */
.step = 1,
.default_value = 0,
},
.priv = 0},
};
-
/* Registers common to OV511 / OV518 */
#define R51x_FIFO_PSIZE 0x30 /* 2 bytes wide w/ OV518(+) */
#define R51x_SYS_RESET 0x50
#define OV511_RESET_OMNICE 0x08
#define R51x_SYS_INIT 0x53
#define R51x_SYS_SNAP 0x52
-#define R51x_SYS_CUST_ID 0x5F
+#define R51x_SYS_CUST_ID 0x5f
#define R51x_COMP_LUT_BEGIN 0x80
/* OV511 Camera interface register numbers */
#define R511_CAM_OPTS 0x18
#define R511_SNAP_FRAME 0x19
-#define R511_SNAP_PXCNT 0x1A
-#define R511_SNAP_LNCNT 0x1B
-#define R511_SNAP_PXDIV 0x1C
-#define R511_SNAP_LNDIV 0x1D
-#define R511_SNAP_UV_EN 0x1E
-#define R511_SNAP_UV_EN 0x1E
-#define R511_SNAP_OPTS 0x1F
+#define R511_SNAP_PXCNT 0x1a
+#define R511_SNAP_LNCNT 0x1b
+#define R511_SNAP_PXDIV 0x1c
+#define R511_SNAP_LNDIV 0x1d
+#define R511_SNAP_UV_EN 0x1e
+#define R511_SNAP_UV_EN 0x1e
+#define R511_SNAP_OPTS 0x1f
#define R511_DRAM_FLOW_CTL 0x20
#define R511_FIFO_OPTS 0x31
#define OV519_R25_FORMAT 0x25
/* OV519 System Controller register numbers */
-#define OV519_SYS_RESET1 0x51
-#define OV519_SYS_EN_CLK1 0x54
+#define OV519_SYS_RESET1 0x51
+#define OV519_SYS_EN_CLK1 0x54
#define OV519_GPIO_DATA_OUT0 0x71
#define OV519_GPIO_IO_CTRL0 0x72
-#define OV511_ENDPOINT_ADDRESS 1 /* Isoc endpoint number */
+/*#define OV511_ENDPOINT_ADDRESS 1 * Isoc endpoint number */
/*
* The FX2 chip does not give us a zero length read at end of frame.
#define OV7610_REG_COM_I 0x29 /* misc settings */
/* OV7670 registers */
-#define OV7670_REG_GAIN 0x00 /* Gain lower 8 bits (rest in vref) */
-#define OV7670_REG_BLUE 0x01 /* blue gain */
-#define OV7670_REG_RED 0x02 /* red gain */
-#define OV7670_REG_VREF 0x03 /* Pieces of GAIN, VSTART, VSTOP */
-#define OV7670_REG_COM1 0x04 /* Control 1 */
-#define OV7670_REG_AECHH 0x07 /* AEC MS 5 bits */
-#define OV7670_REG_COM3 0x0c /* Control 3 */
-#define OV7670_REG_COM4 0x0d /* Control 4 */
-#define OV7670_REG_COM5 0x0e /* All "reserved" */
-#define OV7670_REG_COM6 0x0f /* Control 6 */
-#define OV7670_REG_AECH 0x10 /* More bits of AEC value */
-#define OV7670_REG_CLKRC 0x11 /* Clock control */
-#define OV7670_REG_COM7 0x12 /* Control 7 */
-#define OV7670_COM7_FMT_VGA 0x00
-#define OV7670_COM7_YUV 0x00 /* YUV */
-#define OV7670_COM7_FMT_QVGA 0x10 /* QVGA format */
-#define OV7670_COM7_FMT_MASK 0x38
-#define OV7670_COM7_RESET 0x80 /* Register reset */
-#define OV7670_REG_COM8 0x13 /* Control 8 */
-#define OV7670_COM8_AEC 0x01 /* Auto exposure enable */
-#define OV7670_COM8_AWB 0x02 /* White balance enable */
-#define OV7670_COM8_AGC 0x04 /* Auto gain enable */
-#define OV7670_COM8_BFILT 0x20 /* Band filter enable */
-#define OV7670_COM8_AECSTEP 0x40 /* Unlimited AEC step size */
-#define OV7670_COM8_FASTAEC 0x80 /* Enable fast AGC/AEC */
-#define OV7670_REG_COM9 0x14 /* Control 9 - gain ceiling */
-#define OV7670_REG_COM10 0x15 /* Control 10 */
-#define OV7670_REG_HSTART 0x17 /* Horiz start high bits */
-#define OV7670_REG_HSTOP 0x18 /* Horiz stop high bits */
-#define OV7670_REG_VSTART 0x19 /* Vert start high bits */
-#define OV7670_REG_VSTOP 0x1a /* Vert stop high bits */
-#define OV7670_REG_MVFP 0x1e /* Mirror / vflip */
-#define OV7670_MVFP_VFLIP 0x10 /* vertical flip */
-#define OV7670_MVFP_MIRROR 0x20 /* Mirror image */
-#define OV7670_REG_AEW 0x24 /* AGC upper limit */
-#define OV7670_REG_AEB 0x25 /* AGC lower limit */
-#define OV7670_REG_VPT 0x26 /* AGC/AEC fast mode op region */
-#define OV7670_REG_HREF 0x32 /* HREF pieces */
-#define OV7670_REG_TSLB 0x3a /* lots of stuff */
-#define OV7670_REG_COM11 0x3b /* Control 11 */
-#define OV7670_COM11_EXP 0x02
-#define OV7670_COM11_HZAUTO 0x10 /* Auto detect 50/60 Hz */
-#define OV7670_REG_COM12 0x3c /* Control 12 */
-#define OV7670_REG_COM13 0x3d /* Control 13 */
-#define OV7670_COM13_GAMMA 0x80 /* Gamma enable */
-#define OV7670_COM13_UVSAT 0x40 /* UV saturation auto adjustment */
-#define OV7670_REG_COM14 0x3e /* Control 14 */
-#define OV7670_REG_EDGE 0x3f /* Edge enhancement factor */
-#define OV7670_REG_COM15 0x40 /* Control 15 */
-#define OV7670_COM15_R00FF 0xc0 /* 00 to FF */
-#define OV7670_REG_COM16 0x41 /* Control 16 */
-#define OV7670_COM16_AWBGAIN 0x08 /* AWB gain enable */
-#define OV7670_REG_BRIGHT 0x55 /* Brightness */
-#define OV7670_REG_CONTRAS 0x56 /* Contrast control */
-#define OV7670_REG_GFIX 0x69 /* Fix gain control */
-#define OV7670_REG_RGB444 0x8c /* RGB 444 control */
-#define OV7670_REG_HAECC1 0x9f /* Hist AEC/AGC control 1 */
-#define OV7670_REG_HAECC2 0xa0 /* Hist AEC/AGC control 2 */
-#define OV7670_REG_BD50MAX 0xa5 /* 50hz banding step limit */
-#define OV7670_REG_HAECC3 0xa6 /* Hist AEC/AGC control 3 */
-#define OV7670_REG_HAECC4 0xa7 /* Hist AEC/AGC control 4 */
-#define OV7670_REG_HAECC5 0xa8 /* Hist AEC/AGC control 5 */
-#define OV7670_REG_HAECC6 0xa9 /* Hist AEC/AGC control 6 */
-#define OV7670_REG_HAECC7 0xaa /* Hist AEC/AGC control 7 */
-#define OV7670_REG_BD60MAX 0xab /* 60hz banding step limit */
+#define OV7670_REG_GAIN 0x00 /* Gain lower 8 bits (rest in vref) */
+#define OV7670_REG_BLUE 0x01 /* blue gain */
+#define OV7670_REG_RED 0x02 /* red gain */
+#define OV7670_REG_VREF 0x03 /* Pieces of GAIN, VSTART, VSTOP */
+#define OV7670_REG_COM1 0x04 /* Control 1 */
+/*#define OV7670_REG_AECHH 0x07 * AEC MS 5 bits */
+#define OV7670_REG_COM3 0x0c /* Control 3 */
+#define OV7670_REG_COM4 0x0d /* Control 4 */
+#define OV7670_REG_COM5 0x0e /* All "reserved" */
+#define OV7670_REG_COM6 0x0f /* Control 6 */
+#define OV7670_REG_AECH 0x10 /* More bits of AEC value */
+#define OV7670_REG_CLKRC 0x11 /* Clock control */
+#define OV7670_REG_COM7 0x12 /* Control 7 */
+#define OV7670_COM7_FMT_VGA 0x00
+/*#define OV7670_COM7_YUV 0x00 * YUV */
+#define OV7670_COM7_FMT_QVGA 0x10 /* QVGA format */
+#define OV7670_COM7_FMT_MASK 0x38
+#define OV7670_COM7_RESET 0x80 /* Register reset */
+#define OV7670_REG_COM8 0x13 /* Control 8 */
+#define OV7670_COM8_AEC 0x01 /* Auto exposure enable */
+#define OV7670_COM8_AWB 0x02 /* White balance enable */
+#define OV7670_COM8_AGC 0x04 /* Auto gain enable */
+#define OV7670_COM8_BFILT 0x20 /* Band filter enable */
+#define OV7670_COM8_AECSTEP 0x40 /* Unlimited AEC step size */
+#define OV7670_COM8_FASTAEC 0x80 /* Enable fast AGC/AEC */
+#define OV7670_REG_COM9 0x14 /* Control 9 - gain ceiling */
+#define OV7670_REG_COM10 0x15 /* Control 10 */
+#define OV7670_REG_HSTART 0x17 /* Horiz start high bits */
+#define OV7670_REG_HSTOP 0x18 /* Horiz stop high bits */
+#define OV7670_REG_VSTART 0x19 /* Vert start high bits */
+#define OV7670_REG_VSTOP 0x1a /* Vert stop high bits */
+#define OV7670_REG_MVFP 0x1e /* Mirror / vflip */
+#define OV7670_MVFP_VFLIP 0x10 /* vertical flip */
+#define OV7670_MVFP_MIRROR 0x20 /* Mirror image */
+#define OV7670_REG_AEW 0x24 /* AGC upper limit */
+#define OV7670_REG_AEB 0x25 /* AGC lower limit */
+#define OV7670_REG_VPT 0x26 /* AGC/AEC fast mode op region */
+#define OV7670_REG_HREF 0x32 /* HREF pieces */
+#define OV7670_REG_TSLB 0x3a /* lots of stuff */
+#define OV7670_REG_COM11 0x3b /* Control 11 */
+#define OV7670_COM11_EXP 0x02
+#define OV7670_COM11_HZAUTO 0x10 /* Auto detect 50/60 Hz */
+#define OV7670_REG_COM12 0x3c /* Control 12 */
+#define OV7670_REG_COM13 0x3d /* Control 13 */
+#define OV7670_COM13_GAMMA 0x80 /* Gamma enable */
+#define OV7670_COM13_UVSAT 0x40 /* UV saturation auto adjustment */
+#define OV7670_REG_COM14 0x3e /* Control 14 */
+#define OV7670_REG_EDGE 0x3f /* Edge enhancement factor */
+#define OV7670_REG_COM15 0x40 /* Control 15 */
+/*#define OV7670_COM15_R00FF 0xc0 * 00 to FF */
+#define OV7670_REG_COM16 0x41 /* Control 16 */
+#define OV7670_COM16_AWBGAIN 0x08 /* AWB gain enable */
+#define OV7670_REG_BRIGHT 0x55 /* Brightness */
+#define OV7670_REG_CONTRAS 0x56 /* Contrast control */
+#define OV7670_REG_GFIX 0x69 /* Fix gain control */
+#define OV7670_REG_RGB444 0x8c /* RGB 444 control */
+#define OV7670_REG_HAECC1 0x9f /* Hist AEC/AGC control 1 */
+#define OV7670_REG_HAECC2 0xa0 /* Hist AEC/AGC control 2 */
+#define OV7670_REG_BD50MAX 0xa5 /* 50hz banding step limit */
+#define OV7670_REG_HAECC3 0xa6 /* Hist AEC/AGC control 3 */
+#define OV7670_REG_HAECC4 0xa7 /* Hist AEC/AGC control 4 */
+#define OV7670_REG_HAECC5 0xa8 /* Hist AEC/AGC control 5 */
+#define OV7670_REG_HAECC6 0xa9 /* Hist AEC/AGC control 6 */
+#define OV7670_REG_HAECC7 0xaa /* Hist AEC/AGC control 7 */
+#define OV7670_REG_BD60MAX 0xab /* 60hz banding step limit */
struct ov_regvals {
u8 reg;
* "wait 4096 external clock ... to make sure the sensor is
* stable and ready to access registers" i.e. 160us at 24MHz
*/
-
{ 0x12, 0x80 }, /* COMH reset */
{ 0x12, 0x00 }, /* QXGA, master */
* COMI[0] "Exposure control"
* = 0 (0x00) .......0 "Manual"
*/
- { 0x13, 0xC0 },
+ { 0x13, 0xc0 },
/*
* 09 COMC "Common Control C"
* COME[0] "Auto zero circuit select"
* = 1 (0x01) .......1 "On"
*/
- { 0x0d, 0xA1 },
+ { 0x0d, 0xa1 },
/*
* 0E COMF "Common Control F"
* COMJ[0] "Reserved"
* = 0 (0x00) .......0
*/
- { 0x14, 0xC6 },
+ { 0x14, 0xc6 },
/*
* 15 COMK "Common Control K"
* FVOPT[7:0] "Range"
* = 31 (0x1F) 00011111
*/
- { 0x3c, 0x1F },
+ { 0x3c, 0x1f },
/*
* 44 Undocumented = 0 (0x00) 00000000
* 48[7:0] "It's a secret"
* = 192 (0xC0) 11000000
*/
- { 0x48, 0xC0 },
+ { 0x48, 0xc0 },
/*
* 49 Undocumented = 25 (0x19) 00011001
* 4B[7:0] "It's a secret"
* = 128 (0x80) 10000000
*/
- { 0x4B, 0x80 },
+ { 0x4b, 0x80 },
/*
* 4D Undocumented = 196 (0xC4) 11000100
* 4D[7:0] "It's a secret"
* = 196 (0xC4) 11000100
*/
- { 0x4D, 0xC4 },
+ { 0x4d, 0xc4 },
/*
* 35 VREF "Reference Voltage Control"
- * = 76 (0x4C) 01001100
+ * = 76 (0x4c) 01001100
* VREF[7:5] "Column high reference control"
* = 2 (0x02) 010..... "higher voltage"
* VREF[4:2] "Column low reference control"
* VREF[1:0] "Reserved"
* = 0 (0x00) ......00
*/
- { 0x35, 0x4C },
+ { 0x35, 0x4c },
/*
* 3D Undocumented = 0 (0x00) 00000000
* 3D[7:0] "It's a secret"
* = 0 (0x00) 00000000
*/
- { 0x3D, 0x00 },
+ { 0x3d, 0x00 },
/*
* 3E Undocumented = 0 (0x00) 00000000
* 3E[7:0] "It's a secret"
* = 0 (0x00) 00000000
*/
- { 0x3E, 0x00 },
+ { 0x3e, 0x00 },
/*
* 3B FREFB "Internal Reference Adjustment"
* VBLM[3:0] "Sensor current control"
* = 10 (0x0A) ....1010
*/
- { 0x34, 0x5A },
+ { 0x34, 0x5a },
/*
* 3B FREFB "Internal Reference Adjustment"
* HREFST[7:0] "Horizontal window start, 8 MSBs"
* = 31 (0x1F) 00011111
*/
- { 0x17, 0x1F },
+ { 0x17, 0x1f },
/*
* 18 HREFEND "Horizontal window end"
* HREFEND[7:0] "Horizontal Window End, 8 MSBs"
* = 95 (0x5F) 01011111
*/
- { 0x18, 0x5F },
+ { 0x18, 0x5f },
/*
* 19 VSTRT "Vertical window start"
* COMA[1:0] "Vertical window start line control 2 LSBs"
* = 2 (0x02) ......10
*/
- { 0x03, 0x4A },
+ { 0x03, 0x4a },
/*
* 11 CLKRC "Clock Rate Control"
* HREFST[7:0] "Horizontal window start, 8 MSBs"
* = 31 (0x1F) 00011111
*/
- { 0x17, 0x1F },
+ { 0x17, 0x1f },
/*
* 18 HREFEND "Horizontal window end"
* HREFEND[7:0] "Horizontal Window End, 8 MSBs"
* = 95 (0x5F) 01011111
*/
- { 0x18, 0x5F },
+ { 0x18, 0x5f },
/*
* 19 VSTRT "Vertical window start"
* COMA[1:0] "Vertical window start line control 2 LSBs"
* = 2 (0x02) ......10
*/
- { 0x03, 0x4A },
+ { 0x03, 0x4a },
/*
* 02 RED "Red Gain Control"
* RED[6:0] "Value"
* = 47 (0x2F) .0101111
*/
- { 0x02, 0xAF },
+ { 0x02, 0xaf },
/*
* 2D ADDVSL "VSYNC Pulse Width"
* ADDVSL[7:0] "VSYNC pulse width, LSB"
* = 210 (0xD2) 11010010
*/
- { 0x2d, 0xD2 },
+ { 0x2d, 0xd2 },
/*
* 00 GAIN = 24 (0x18) 00011000
* BLUE[6:0] "Value"
* = 112 (0x70) .1110000
*/
- { 0x01, 0xF0 },
+ { 0x01, 0xf0 },
/*
* 10 AEC "Automatic Exposure Control"
* AEC[7:0] "Automatic Exposure Control, 8 MSBs"
* = 10 (0x0A) 00001010
*/
- { 0x10, 0x0A },
-
- { 0xE1, 0x67 },
- { 0xE3, 0x03 },
- { 0xE4, 0x26 },
- { 0xE5, 0x3E },
- { 0xF8, 0x01 },
- { 0xFF, 0x01 },
+ { 0x10, 0x0a },
+
+ { 0xe1, 0x67 },
+ { 0xe3, 0x03 },
+ { 0xe4, 0x26 },
+ { 0xe5, 0x3e },
+ { 0xf8, 0x01 },
+ { 0xff, 0x01 },
};
static const struct ov_i2c_regvals norm_6x20[] = {
{ 0x03, 0x60 },
{ 0x05, 0x7f }, /* For when autoadjust is off */
{ 0x07, 0xa8 },
- /* The ratio of 0x0c and 0x0d controls the white point */
+ /* The ratio of 0x0c and 0x0d controls the white point */
{ 0x0c, 0x24 },
{ 0x0d, 0x24 },
{ 0x0f, 0x15 }, /* COMS */
/* Up on sensor reset empty the register cache */
if (reg == 0x12 && (value & 0x80))
memset(sd->sensor_reg_cache, -1,
- sizeof(sd->sensor_reg_cache));
+ sizeof(sd->sensor_reg_cache));
else
sd->sensor_reg_cache[reg] = value;
}
return -EIO;
/* Wait for it to initialize */
msleep(150);
+
/* Dummy read to sync I2C */
if (i2c_r(sd, 0x00) < 0)
return -EIO;
sd->sensor = SEN_OV3610;
} else {
err("Error unknown sensor type: 0x%02x%02x",
- high, low);
+ high, low);
return -1;
}
{
int rc, high, low;
-
PDEBUG(D_PROBE, "starting OV7xx0 configuration");
/* Detect sensor (sub)type */
6, 6, 6, 6, 7, 7, 7, 8,
7, 7, 6, 7, 7, 7, 8, 8
};
-
const unsigned char uvQuanTable518[] = {
6, 6, 6, 7, 7, 7, 7, 7,
6, 6, 6, 7, 7, 7, 7, 7,
if (sd->bridge == BRIDGE_OV511 || sd->bridge == BRIDGE_OV511PLUS) {
pYTable = yQuanTable511;
pUVTable = uvQuanTable511;
- size = 32;
+ size = 32;
} else {
pYTable = yQuanTable518;
pUVTable = uvQuanTable518;
- size = 16;
+ size = 16;
}
for (i = 0; i < size; i++) {
/* First 5 bits of custom ID reg are a revision ID on OV518 */
PDEBUG(D_PROBE, "Device revision %d",
- 0x1F & reg_r(sd, R51x_SYS_CUST_ID));
+ 0x1f & reg_r(sd, R51x_SYS_CUST_ID));
rc = write_regvals(sd, init_518, ARRAY_SIZE(init_518));
if (rc < 0)
static int ov519_configure(struct sd *sd)
{
static const struct ov_regvals init_519[] = {
- { 0x5a, 0x6d }, /* EnableSystem */
- { 0x53, 0x9b },
- { 0x54, 0xff }, /* set bit2 to enable jpeg */
- { 0x5d, 0x03 },
- { 0x49, 0x01 },
- { 0x48, 0x00 },
+ { 0x5a, 0x6d }, /* EnableSystem */
+ { 0x53, 0x9b },
+ { 0x54, 0xff }, /* set bit2 to enable jpeg */
+ { 0x5d, 0x03 },
+ { 0x49, 0x01 },
+ { 0x48, 0x00 },
/* Set LED pin to output mode. Bit 4 must be cleared or sensor
* detection will fail. This deserves further investigation. */
{ OV519_GPIO_IO_CTRL0, 0xee },
- { 0x51, 0x0f }, /* SetUsbInit */
- { 0x51, 0x00 },
- { 0x22, 0x00 },
+ { 0x51, 0x0f }, /* SetUsbInit */
+ { 0x51, 0x00 },
+ { 0x22, 0x00 },
/* windows reads 0x55 at this point*/
};
ov518_reg_w32(sd, R51x_FIFO_PSIZE, packet_size & ~7, 2);
/******** Set the mode ********/
-
reg_w(sd, 0x2b, 0);
reg_w(sd, 0x2c, 0);
reg_w(sd, 0x2d, 0);
/* Windows driver does this here; who knows why */
reg_w(sd, 0x2f, 0x80);
- /******** Set the framerate ********/
+ /******** Set the framerate ********/
sd->clockdiv = 1;
/* Mode independent, but framerate dependent, regs */
return 0;
}
-
/* Sets up the OV519 with the given image parameters
*
* OV519 needs a completely different approach, until we can figure out what
u8 v;
gspca_dev = &sd->gspca_dev;
- qvga = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv & 1;
+ qvga = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv & 1;
/******** Mode (VGA/QVGA) and sensor specific regs ********/
switch (sd->sensor) {
return mode_init_ov_sensor_regs(sd);
gspca_dev = &sd->gspca_dev;
- qvga = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv & 1;
- crop = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv & 2;
+ qvga = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv & 1;
+ crop = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv & 2;
/* The different sensor ICs handle setting up of window differently.
* IF YOU SET IT WRONG, YOU WILL GET ALL ZERO ISOC DATA FROM OV51x!! */
{USB_DEVICE(0x041e, 0x4060), .driver_info = BRIDGE_OV519 },
{USB_DEVICE(0x041e, 0x4061), .driver_info = BRIDGE_OV519 },
{USB_DEVICE(0x041e, 0x4064),
- .driver_info = BRIDGE_OV519 | BRIDGE_INVERT_LED },
+ .driver_info = BRIDGE_OV519 | BRIDGE_INVERT_LED },
{USB_DEVICE(0x041e, 0x4067), .driver_info = BRIDGE_OV519 },
{USB_DEVICE(0x041e, 0x4068),
- .driver_info = BRIDGE_OV519 | BRIDGE_INVERT_LED },
+ .driver_info = BRIDGE_OV519 | BRIDGE_INVERT_LED },
{USB_DEVICE(0x045e, 0x028c), .driver_info = BRIDGE_OV519 },
{USB_DEVICE(0x054c, 0x0154), .driver_info = BRIDGE_OV519 },
{USB_DEVICE(0x054c, 0x0155),
- .driver_info = BRIDGE_OV519 | BRIDGE_INVERT_LED },
+ .driver_info = BRIDGE_OV519 | BRIDGE_INVERT_LED },
{USB_DEVICE(0x05a9, 0x0511), .driver_info = BRIDGE_OV511 },
{USB_DEVICE(0x05a9, 0x0518), .driver_info = BRIDGE_OV518 },
{USB_DEVICE(0x05a9, 0x0519), .driver_info = BRIDGE_OV519 },
{USB_DEVICE(0x0b62, 0x0059), .driver_info = BRIDGE_OVFX2 },
{USB_DEVICE(0x0e96, 0xc001), .driver_info = BRIDGE_OVFX2 },
{USB_DEVICE(0x1046, 0x9967), .driver_info = BRIDGE_W9968CF },
- {USB_DEVICE(0x8020, 0xEF04), .driver_info = BRIDGE_OVFX2 },
+ {USB_DEVICE(0x8020, 0xef04), .driver_info = BRIDGE_OVFX2 },
{}
};
projects / platform / kernel / kernel-mfld-blackbay.git / commitdiff