#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.52e.
+# Generated by GNU Autoconf 2.52e for GNU Automake 1.5a.
+#
+# Report bugs to <bug-automake@gnu.org>.
#
# Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001
# Free Software Foundation, Inc.
# This configure script is free software; the Free Software Foundation
# gives unlimited permission to copy, distribute and modify it.
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g"
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g"
-
## --------------------- ##
## M4sh Initialization. ##
## --------------------- ##
# Name of the executable.
as_me=`echo "$0" |sed 's,\(.*[\\/]\+\)\?\([^\\/]\+\)[\\/]*,\2,'`
+# If LINENO is not supported by the shell, produce a version of this
+# script where LINENO is hard coded. Rewrite if not up to date only.
+# Comparing LINENO against _oline_ is not a good solution, since in
+# the case of embedded executables (such as config.status within
+# configure) you'd compare LINENO wrt config.status vs. _oline_ vs
+# configure. Hence a useless rewrite (not to mention the risk of
+# ``infinite'' rewrites. Merely check that LINENO is incremented
+# between two lines, which is a property guaranteed for _oline_, hence
+# it protects us from repetitive rewrites.
+as_lineno_1=$LINENO
+as_lineno_2=$LINENO
+# Compute as_lineno_1 in two steps: some shells restart LINENO for
+# subshells.
+as_lineno_1=`(expr $as_lineno_1 + 1) 2>/dev/null`
+if test "x$as_lineno_1" != "x$as_lineno_2"; then
+ if test ! -f $as_me.lineno ||
+ test x`ls -1dt $as_me.lineno $as_me 2>/dev/null | sed 1q` \
+ != x$as_me.lineno; then
+ # Be sure to write the pattern so that it doesn't replace itself:
+ # it must not match itself.
+ awk '{
+ if ($0 ~ /[$]LINENO/)
+ while (sub (/[$]LINENO/, NR))
+ continue
+ print
+ }' <$as_me >$as_me.lineno
+ chmod +x $as_me.lineno
+ fi
+ exec ${SHELL-/bin/sh} ./$as_me.lineno
+fi
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
*c*,-n*) ECHO_N= ECHO_C='
' ECHO_T=' ' ;;
as_executable_p="test -f"
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g"
+
# Support unset when possible.
if (FOO=FOO; unset FOO) >/dev/null 2>&1; then
as_unset=unset
IFS=" $as_nl"
# CDPATH.
-$as_unset CDPATH || test "${CDPATH+set}" != set || { CDPATH=:; export CDPATH; }
+$as_unset CDPATH || test "${CDPATH+set}" != set || { CDPATH=$PATH_SEPARATOR; export CDPATH; }
# Name of the host.
# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
mandir='${prefix}/man'
# Identity of this package.
-PACKAGE_NAME=
-PACKAGE_TARNAME=
-PACKAGE_VERSION=
-PACKAGE_STRING=
-PACKAGE_BUGREPORT=
+PACKAGE_NAME='GNU Automake'
+PACKAGE_TARNAME='automake'
+PACKAGE_VERSION='1.5a'
+PACKAGE_STRING='GNU Automake 1.5a'
+PACKAGE_BUGREPORT='bug-automake@gnu.org'
ac_prev=
for ac_option
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat <<_ACEOF
-\`configure' configures this package to adapt to many kinds of systems.
+\`configure' configures GNU Automake 1.5a to adapt to many kinds of systems.
Usage: $0 [OPTION]... [VAR=VALUE]...
fi
if test -n "$ac_init_help"; then
-
+ case $ac_init_help in
+ short | recursive ) echo "Configuration of GNU Automake 1.5a:";;
+ esac
cat <<\_ACEOF
Optional Features:
--disable-dependency-tracking Speeds up one-time builds
--enable-dependency-tracking Do not reject slow dependency extractors
+Report bugs to <bug-automake@gnu.org>.
_ACEOF
fi
for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
cd $ac_dir
if test "$ac_dir" != .; then
- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\./,,'`
+ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
# A "../" for each directory in $ac_dir_suffix.
- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^/]*,../,g'`
+ ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
else
ac_dir_suffix= ac_top_builddir=
fi
test -n "$ac_init_help" && exit 0
if $ac_init_version; then
cat <<\_ACEOF
+GNU Automake configure 1.5a
+generated by GNU Autoconf 2.52e
Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001
Free Software Foundation, Inc.
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
-It was created by $as_me, which was
+It was created by GNU Automake $as_me 1.5a, which was
generated by GNU Autoconf 2.52e. Invocation command line was
$ $0 $@
fi
for ac_site_file in $CONFIG_SITE; do
if test -r "$ac_site_file"; then
- { echo "$as_me:849: loading site script $ac_site_file" >&5
+ { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
echo "$as_me: loading site script $ac_site_file" >&6;}
sed 's/^/| /' "$ac_site_file" >&5
. "$ac_site_file"
# Some versions of bash will fail to source /dev/null (special
# files actually), so we avoid doing that.
if test -f "$cache_file"; then
- { echo "$as_me:860: loading cache $cache_file" >&5
+ { echo "$as_me:$LINENO: loading cache $cache_file" >&5
echo "$as_me: loading cache $cache_file" >&6;}
case $cache_file in
[\\/]* | ?:[\\/]* ) . $cache_file;;
esac
fi
else
- { echo "$as_me:868: creating cache $cache_file" >&5
+ { echo "$as_me:$LINENO: creating cache $cache_file" >&5
echo "$as_me: creating cache $cache_file" >&6;}
>$cache_file
fi
eval ac_new_val="\$ac_env_${ac_var}_value"
case $ac_old_set,$ac_new_set in
set,)
- { echo "$as_me:884: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+ { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
ac_cache_corrupted=: ;;
,set)
- { echo "$as_me:888: error: \`$ac_var' was not set in the previous run" >&5
+ { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
ac_cache_corrupted=: ;;
,);;
*)
if test "x$ac_old_val" != "x$ac_new_val"; then
- { echo "$as_me:894: error: \`$ac_var' has changed since the previous run:" >&5
+ { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
- { echo "$as_me:896: former value: $ac_old_val" >&5
+ { echo "$as_me:$LINENO: former value: $ac_old_val" >&5
echo "$as_me: former value: $ac_old_val" >&2;}
- { echo "$as_me:898: current value: $ac_new_val" >&5
+ { echo "$as_me:$LINENO: current value: $ac_new_val" >&5
echo "$as_me: current value: $ac_new_val" >&2;}
ac_cache_corrupted=:
fi;;
fi
done
if $ac_cache_corrupted; then
- { echo "$as_me:917: error: changes in the environment can compromise the build" >&5
+ { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
echo "$as_me: error: changes in the environment can compromise the build" >&2;}
- { { echo "$as_me:919: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
+ { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
{ (exit 1); exit 1; }; }
fi
fi
done
if test -z "$ac_aux_dir"; then
- { { echo "$as_me:947: error: cannot find install-sh or install.sh in lib $srcdir/lib" >&5
+ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in lib $srcdir/lib" >&5
echo "$as_me: error: cannot find install-sh or install.sh in lib $srcdir/lib" >&2;}
{ (exit 1); exit 1; }; }
fi
# AFS /usr/afsws/bin/install, which mishandles nonexistent args
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
-echo "$as_me:967: checking for a BSD compatible install" >&5
+echo "$as_me:$LINENO: checking for a BSD compatible install" >&5
echo $ECHO_N "checking for a BSD compatible install... $ECHO_C" >&6
if test -z "$INSTALL"; then
if test "${ac_cv_path_install+set}" = set; then
# Don't use installbsd from OSF since it installs stuff as root
# by default.
for ac_prog in ginstall scoinst install; do
- if $as_executable_p "$as_dir/$ac_prog"; then
- if test $ac_prog = install &&
- grep dspmsg "$as_dir/$ac_prog" >/dev/null 2>&1; then
- # AIX install. It has an incompatible calling convention.
- :
- elif test $ac_prog = install &&
- grep pwplus "$as_dir/$ac_prog" >/dev/null 2>&1; then
- # program-specific install script used by HP pwplus--don't use.
- :
- else
- ac_cv_path_install="$as_dir/$ac_prog -c"
- break 2
- fi
- fi
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
+ if test $ac_prog = install &&
+ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+ # AIX install. It has an incompatible calling convention.
+ :
+ elif test $ac_prog = install &&
+ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+ # program-specific install script used by HP pwplus--don't use.
+ :
+ else
+ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+ break 3
+ fi
+ fi
+ done
done
;;
esac
INSTALL=$ac_install_sh
fi
fi
-echo "$as_me:1018: result: $INSTALL" >&5
+echo "$as_me:$LINENO: result: $INSTALL" >&5
echo "${ECHO_T}$INSTALL" >&6
# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-echo "$as_me:1029: checking whether build environment is sane" >&5
+echo "$as_me:$LINENO: checking whether build environment is sane" >&5
echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6
# Just in case
sleep 1
# if, for instance, CONFIG_SHELL is bash and it inherits a
# broken ls alias from the environment. This has actually
# happened. Such a system could not be considered "sane".
- { { echo "$as_me:1053: error: ls -t appears to fail. Make sure there is not a broken
+ { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken
alias in your environment" >&5
echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken
alias in your environment" >&2;}
# Ok.
:
else
- { { echo "$as_me:1066: error: newly created file is older than distributed files!
+ { { echo "$as_me:$LINENO: error: newly created file is older than distributed files!
Check your system clock" >&5
echo "$as_me: error: newly created file is older than distributed files!
Check your system clock" >&2;}
{ (exit 1); exit 1; }; }
fi
-echo "$as_me:1072: result: yes" >&5
+echo "$as_me:$LINENO: result: yes" >&5
echo "${ECHO_T}yes" >&6
test "$program_prefix" != NONE &&
program_transform_name="s,^,$program_prefix,;$program_transform_name"
else
am_missing_run=
am_backtick='`'
- { echo "$as_me:1097: WARNING: ${am_backtick}missing' script is too old or missing" >&5
+ { echo "$as_me:$LINENO: WARNING: ${am_backtick}missing' script is too old or missing" >&5
echo "$as_me: WARNING: ${am_backtick}missing' script is too old or missing" >&2;}
fi
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
-echo "$as_me:1105: checking for $ac_word" >&5
+echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_prog_AWK+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
if test -n "$AWK"; then
ac_cv_prog_AWK="$AWK" # Let the user override the test.
else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- $as_executable_p "$as_dir/$ac_word" || continue
-ac_cv_prog_AWK="$ac_prog"
-echo "$as_me:1120: found $as_dir/$ac_word" >&5
-break
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_AWK="$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
done
fi
fi
AWK=$ac_cv_prog_AWK
if test -n "$AWK"; then
- echo "$as_me:1128: result: $AWK" >&5
+ echo "$as_me:$LINENO: result: $AWK" >&5
echo "${ECHO_T}$AWK" >&6
else
- echo "$as_me:1131: result: no" >&5
+ echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6
fi
test -n "$AWK" && break
done
-echo "$as_me:1138: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \${MAKE}" >&5
echo $ECHO_N "checking whether ${MAKE-make} sets \${MAKE}... $ECHO_C" >&6
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,./+-,__p_,'`
if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
rm -f conftest.make
fi
if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
- echo "$as_me:1158: result: yes" >&5
+ echo "$as_me:$LINENO: result: yes" >&5
echo "${ECHO_T}yes" >&6
SET_MAKE=
else
- echo "$as_me:1162: result: no" >&5
+ echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6
SET_MAKE="MAKE=${MAKE-make}"
fi
# test to see if srcdir already configured
if test "`CDPATH=:; cd $srcdir && pwd`" != "`pwd`" &&
test -f $srcdir/config.status; then
- { { echo "$as_me:1198: error: source directory already configured; run \"make distclean\" there first" >&5
+ { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
{ (exit 1); exit 1; }; }
fi
# Define the identity of the package.
PACKAGE=automake
-VERSION=1.4s
+VERSION=1.5a
cat >>confdefs.h <<_ACEOF
#define PACKAGE "$PACKAGE"
# Extract the first word of "perl", so it can be a program name with args.
set dummy perl; ac_word=$2
-echo "$as_me:1254: checking for $ac_word" >&5
+echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_path_PERL+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- if $as_executable_p "$as_dir/$ac_word"; then
- ac_cv_path_PERL="$as_dir/$ac_word"
- echo "$as_me:1271: found $as_dir/$ac_word" >&5
- break
-fi
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_path_PERL="$as_dir/$ac_word$ac_exec_ext"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
done
;;
PERL=$ac_cv_path_PERL
if test -n "$PERL"; then
- echo "$as_me:1282: result: $PERL" >&5
+ echo "$as_me:$LINENO: result: $PERL" >&5
echo "${ECHO_T}$PERL" >&6
else
- echo "$as_me:1285: result: no" >&5
+ echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6
fi
if test -z "$PERL"; then
- { { echo "$as_me:1290: error: perl not found" >&5
+ { { echo "$as_me:$LINENO: error: perl not found" >&5
echo "$as_me: error: perl not found" >&2;}
{ (exit 1); exit 1; }; }
fi
$PERL -e 'require 5.005;' || {
- { { echo "$as_me:1295: error: perl 5.005 or better is required" >&5
+ { { echo "$as_me:$LINENO: error: perl 5.005 or better is required" >&5
echo "$as_me: error: perl 5.005 or better is required" >&2;}
{ (exit 1); exit 1; }; }
}
-ac_config_files="$ac_config_files Makefile lib/Makefile lib/Automake/Makefile lib/am/Makefile m4/Makefile tests/Makefile automake aclocal"
-ac_config_commands="$ac_config_commands default"
+ac_config_files="$ac_config_files automake"
+
+ac_config_files="$ac_config_files aclocal"
+
+ac_config_files="$ac_config_files Makefile lib/Makefile lib/Automake/Makefile lib/am/Makefile m4/Makefile tests/Makefile"
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
: ${CONFIG_STATUS=./config.status}
ac_clean_files_save=$ac_clean_files
ac_clean_files="$ac_clean_files $CONFIG_STATUS"
-{ echo "$as_me:1411: creating $CONFIG_STATUS" >&5
+{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
echo "$as_me: creating $CONFIG_STATUS" >&6;}
cat >$CONFIG_STATUS <<_ACEOF
#! $SHELL
# Name of the executable.
as_me=`echo "$0" |sed 's,\(.*[\\/]\+\)\?\([^\\/]\+\)[\\/]*,\2,'`
+# If LINENO is not supported by the shell, produce a version of this
+# script where LINENO is hard coded. Rewrite if not up to date only.
+# Comparing LINENO against _oline_ is not a good solution, since in
+# the case of embedded executables (such as config.status within
+# configure) you'd compare LINENO wrt config.status vs. _oline_ vs
+# configure. Hence a useless rewrite (not to mention the risk of
+# ``infinite'' rewrites. Merely check that LINENO is incremented
+# between two lines, which is a property guaranteed for _oline_, hence
+# it protects us from repetitive rewrites.
+as_lineno_1=$LINENO
+as_lineno_2=$LINENO
+# Compute as_lineno_1 in two steps: some shells restart LINENO for
+# subshells.
+as_lineno_1=`(expr $as_lineno_1 + 1) 2>/dev/null`
+if test "x$as_lineno_1" != "x$as_lineno_2"; then
+ if test ! -f $as_me.lineno ||
+ test x`ls -1dt $as_me.lineno $as_me 2>/dev/null | sed 1q` \
+ != x$as_me.lineno; then
+ # Be sure to write the pattern so that it doesn't replace itself:
+ # it must not match itself.
+ awk '{
+ if ($0 ~ /[$]LINENO/)
+ while (sub (/[$]LINENO/, NR))
+ continue
+ print
+ }' <$as_me >$as_me.lineno
+ chmod +x $as_me.lineno
+ fi
+ exec ${SHELL-/bin/sh} ./$as_me.lineno
+fi
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
*c*,-n*) ECHO_N= ECHO_C='
' ECHO_T=' ' ;;
as_executable_p="test -f"
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g"
+
# Support unset when possible.
if (FOO=FOO; unset FOO) >/dev/null 2>&1; then
as_unset=unset
IFS=" $as_nl"
# CDPATH.
-$as_unset CDPATH || test "${CDPATH+set}" != set || { CDPATH=:; export CDPATH; }
+$as_unset CDPATH || test "${CDPATH+set}" != set || { CDPATH=$PATH_SEPARATOR; export CDPATH; }
exec 6>&1
} >&5
cat >&5 <<_CSEOF
-This file was extended by $as_me, which was
+This file was extended by GNU Automake $as_me 1.5a, which was
generated by GNU Autoconf 2.52e. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
Configuration files:
$config_files
-Configuration commands:
-$config_commands
-
Report bugs to <bug-autoconf@gnu.org>."
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF
ac_cs_version="\\
-config.status
+GNU Automake config.status 1.5a
configured by $0, generated by GNU Autoconf 2.52e,
with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
echo "$ac_cs_version"; exit 0 ;;
--he | --h)
# Conflict between --help and --header
- { { echo "$as_me:1629: error: ambiguous option: $1
+ { { echo "$as_me:$LINENO: error: ambiguous option: $1
Try \`$0 --help' for more information." >&5
echo "$as_me: error: ambiguous option: $1
Try \`$0 --help' for more information." >&2;}
ac_need_defaults=false;;
# This is an error.
- -*) { { echo "$as_me:1648: error: unrecognized option: $1
+ -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
Try \`$0 --help' for more information." >&5
echo "$as_me: error: unrecognized option: $1
Try \`$0 --help' for more information." >&2;}
do
case "$ac_config_target" in
# Handling of arguments.
+ "automake" ) CONFIG_FILES="$CONFIG_FILES automake" ;;
+ "aclocal" ) CONFIG_FILES="$CONFIG_FILES aclocal" ;;
"Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
"lib/Makefile" ) CONFIG_FILES="$CONFIG_FILES lib/Makefile" ;;
"lib/Automake/Makefile" ) CONFIG_FILES="$CONFIG_FILES lib/Automake/Makefile" ;;
"lib/am/Makefile" ) CONFIG_FILES="$CONFIG_FILES lib/am/Makefile" ;;
"m4/Makefile" ) CONFIG_FILES="$CONFIG_FILES m4/Makefile" ;;
"tests/Makefile" ) CONFIG_FILES="$CONFIG_FILES tests/Makefile" ;;
- "automake" ) CONFIG_FILES="$CONFIG_FILES automake" ;;
- "aclocal" ) CONFIG_FILES="$CONFIG_FILES aclocal" ;;
- "default" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default" ;;
- *) { { echo "$as_me:1676: error: invalid argument: $ac_config_target" >&5
+ *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
{ (exit 1); exit 1; }; };;
esac
# bizarre bug on SunOS 4.1.3.
if $ac_need_defaults; then
test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
- test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
fi
# Create a temporary directory, and hook for its removal unless debugging.
as_incr_dir=$as_incr_dir/$as_mkdir_dir
test -d "$as_incr_dir" ||
mkdir "$as_incr_dir" ||
- { { echo "$as_me:1861: error: cannot create \"$ac_dir\"" >&5
+ { { echo "$as_me:$LINENO: error: cannot create \"$ac_dir\"" >&5
echo "$as_me: error: cannot create \"$ac_dir\"" >&2;}
{ (exit 1); exit 1; }; }
;;
done; }
if test "$ac_dir" != .; then
- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\./,,'`
+ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
# A "../" for each directory in $ac_dir_suffix.
- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^/]*,../,g'`
+ ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
else
ac_dir_suffix= ac_top_builddir=
fi
esac
if test x"$ac_file" != x-; then
- { echo "$as_me:1898: creating $ac_file" >&5
+ { echo "$as_me:$LINENO: creating $ac_file" >&5
echo "$as_me: creating $ac_file" >&6;}
rm -f "$ac_file"
fi
-) echo $tmp/stdin ;;
[\\/$]*)
# Absolute (can't be DOS-style, as IFS=:)
- test -f "$f" || { { echo "$as_me:1916: error: cannot find input file: $f" >&5
+ test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
echo "$as_me: error: cannot find input file: $f" >&2;}
{ (exit 1); exit 1; }; }
echo $f;;
echo $srcdir/$f
else
# /dev/null tree
- { { echo "$as_me:1929: error: cannot find input file: $f" >&5
+ { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
echo "$as_me: error: cannot find input file: $f" >&2;}
{ (exit 1); exit 1; }; }
fi;;
rm -f $tmp/out
fi
-done
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-
-#
-# CONFIG_COMMANDS section.
-#
-for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue
- ac_dest=`echo "$ac_file" | sed 's,:.*,,'`
- ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'`
- ac_dir=`$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$ac_dest" : 'X\(//\)[^/]' \| \
- X"$ac_dest" : 'X\(//\)$' \| \
- X"$ac_dest" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X"$ac_dest" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
- if test "$ac_dir" != .; then
- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\./,,'`
- # A "../" for each directory in $ac_dir_suffix.
- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^/]*,../,g'`
-else
- ac_dir_suffix= ac_top_builddir=
-fi
-
-case $srcdir in
- .) # No --srcdir option. We are building in place.
- ac_srcdir=.
- if test -z "$ac_top_builddir"; then
- ac_top_srcdir=.
- else
- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
- fi ;;
- [\\/]* | ?:[\\/]* ) # Absolute path.
- ac_srcdir=$srcdir$ac_dir_suffix;
- ac_top_srcdir=$srcdir ;;
- *) # Relative path.
- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
- ac_top_srcdir=$ac_top_builddir$srcdir ;;
-esac
-
- { echo "$as_me:2001: executing $ac_dest commands" >&5
-echo "$as_me: executing $ac_dest commands" >&6;}
- case $ac_dest in
- default ) chmod +x automake aclocal ;;
+ # Run the commands associated with the file.
+ case $ac_file in
+ automake ) chmod +x automake ;;
+ aclocal ) chmod +x aclocal ;;
esac
done
_ACEOF