dt-bindings: spi: Add andestech atcspi200 spi binding doc
authorRick Chen <rick@andestech.com>
Wed, 15 Nov 2017 08:03:34 +0000 (16:03 +0800)
committerRick Chen <rickchen36@gmail.com>
Thu, 30 Nov 2017 01:45:29 +0000 (09:45 +0800)
Add a document to describe Andestech atcspi200 spi and
binding information.

Signed-off-by: Rick Chen <rick@andestech.com>
doc/device-tree-bindings/spi/spi-atcspi200.txt [new file with mode: 0644]

diff --git a/doc/device-tree-bindings/spi/spi-atcspi200.txt b/doc/device-tree-bindings/spi/spi-atcspi200.txt
new file mode 100644 (file)
index 0000000..9c0630b
--- /dev/null
@@ -0,0 +1,37 @@
+Andestech ATCSPI200 SPI controller Device Tree Bindings
+-------------------------------------------------------
+ATCSPI200 is a Serial Peripheral Interface (SPI) controller
+which serves as a SPI master or a SPI slave.
+
+It is often be embedded in AE3XX and AE250 platforms.
+
+Required properties:
+- compatible: has to be "andestech,atcspi200".
+- reg: Base address and size of the controllers memory area.
+- #address-cells: <1>, as required by generic SPI binding.
+- #size-cells: <0>, also as required by generic SPI binding.
+- interrupts: Property with a value describing the interrupt number.
+- clocks: Clock phandles (see clock bindings for details).
+- spi-max-frequency: Maximum SPI clocking speed of device in Hz.
+
+Optional properties:
+- num-cs: Number of chip selects used.
+
+Example:
+
+       spi: spi@f0b00000 {
+               compatible = "andestech,atcspi200";
+               reg = <0xf0b00000 0x1000>;
+               #address-cells = <1>;
+               #size-cells = <0>;
+               num-cs = <1>;
+               clocks = <&spiclk>;
+               interrupts = <3 4>;
+               flash@0 {
+                       compatible = "spi-flash";
+                       spi-max-frequency = <50000000>;
+                       reg = <0>;
+                       spi-cpol;
+                       spi-cpha;
+               };
+       };