arm64: dts: qcom: msm8996: Pad addresses

Pad all addresses in msm8996.dtsi to 8 digits, in order to make it
easier to ensure ordering when adding new nodes.

Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index a6c5c07..dce20fe 100644 (file)
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -520,7 +520,7 @@
 
                rpm_msg_ram: memory@68000 {
                        compatible = "qcom,rpm-msg-ram";
-                       reg = <0x68000 0x6000>;
+                       reg = <0x00068000 0x6000>;
                };
 
                rng: rng@83000 {
@@ -532,13 +532,13 @@
 
                tcsr_mutex_regs: syscon@740000 {
                        compatible = "syscon";
-                       reg = <0x740000 0x20000>;
+                       reg = <0x00740000 0x20000>;
                };
 
                tsens0: thermal-sensor@4a9000 {
                        compatible = "qcom,msm8996-tsens";
-                       reg = <0x4a9000 0x1000>, /* TM */
-                             <0x4a8000 0x1000>; /* SROT */
+                       reg = <0x004a9000 0x1000>, /* TM */
+                             <0x004a8000 0x1000>; /* SROT */
                        #qcom,sensors = <13>;
                        interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>;
                        interrupt-names = "uplow";
@@ -547,8 +547,8 @@
 
                tsens1: thermal-sensor@4ad000 {
                        compatible = "qcom,msm8996-tsens";
-                       reg = <0x4ad000 0x1000>, /* TM */
-                             <0x4ac000 0x1000>; /* SROT */
+                       reg = <0x004ad000 0x1000>, /* TM */
+                             <0x004ac000 0x1000>; /* SROT */
                        #qcom,sensors = <8>;
                        interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
                        interrupt-names = "uplow";
@@ -557,7 +557,7 @@
 
                tcsr: syscon@7a0000 {
                        compatible = "qcom,tcsr-msm8996", "syscon";
-                       reg = <0x7a0000 0x18000>;
+                       reg = <0x007a0000 0x18000>;
                };
 
                intc: interrupt-controller@9bc0000 {
@@ -573,7 +573,7 @@
 
                apcs_glb: mailbox@9820000 {
                        compatible = "qcom,msm8996-apcs-hmss-global";
-                       reg = <0x9820000 0x1000>;
+                       reg = <0x09820000 0x1000>;
 
                        #mbox-cells = <1>;
                };
@@ -583,7 +583,7 @@
                        #clock-cells = <1>;
                        #reset-cells = <1>;
                        #power-domain-cells = <1>;
-                       reg = <0x300000 0x90000>;
+                       reg = <0x00300000 0x90000>;
                };
 
                stm@3002000 {
@@ -1056,7 +1056,7 @@
 
                kryocc: clock-controller@6400000 {
                        compatible = "qcom,apcc-msm8996";
-                       reg = <0x6400000 0x90000>;
+                       reg = <0x06400000 0x90000>;
                        #clock-cells = <1>;
                };
 
@@ -1102,7 +1102,7 @@
 
                blsp2_uart1: serial@75b0000 {
                        compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
-                       reg = <0x75b0000 0x1000>;
+                       reg = <0x075b0000 0x1000>;
                        interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>,
                                 <&gcc GCC_BLSP2_AHB_CLK>;
@@ -1168,7 +1168,7 @@
                sdhc2: sdhci@74a4900 {
                         status = "disabled";
                         compatible = "qcom,sdhci-msm-v4";
-                        reg = <0x74a4900 0x314>, <0x74a4000 0x800>;
+                        reg = <0x074a4900 0x314>, <0x074a4000 0x800>;
                         reg-names = "hc_mem", "core_mem";
 
                         interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>,
@@ -1253,11 +1253,11 @@
 
                spmi_bus: qcom,spmi@400f000 {
                        compatible = "qcom,spmi-pmic-arb";
-                       reg = <0x400f000 0x1000>,
-                             <0x4400000 0x800000>,
-                             <0x4c00000 0x800000>,
-                             <0x5800000 0x200000>,
-                             <0x400a000 0x002100>;
+                       reg = <0x0400f000 0x1000>,
+                             <0x04400000 0x800000>,
+                             <0x04c00000 0x800000>,
+                             <0x05800000 0x200000>,
+                             <0x0400a000 0x002100>;
                        reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
                        interrupt-names = "periph_irq";
                        interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>;
@@ -1271,7 +1271,7 @@
 
                ufsphy: phy@627000 {
                        compatible = "qcom,msm8996-ufs-phy-qmp-14nm";
-                       reg = <0x627000 0xda8>;
+                       reg = <0x00627000 0xda8>;
                        reg-names = "phy_mem";
                        #phy-cells = <0>;
 
@@ -1284,7 +1284,7 @@
 
                ufshc: ufshc@624000 {
                        compatible = "qcom,ufshc";
-                       reg = <0x624000 0x2500>;
+                       reg = <0x00624000 0x2500>;
                        interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
 
                        phys = <&ufsphy>;
@@ -1343,7 +1343,7 @@
                        #clock-cells = <1>;
                        #reset-cells = <1>;
                        #power-domain-cells = <1>;
-                       reg = <0x8c0000 0x40000>;
+                       reg = <0x008c0000 0x40000>;
                        assigned-clocks = <&mmcc MMPLL9_PLL>,
                                          <&mmcc MMPLL1_PLL>,
                                          <&mmcc MMPLL3_PLL>,
@@ -1358,7 +1358,7 @@
 
                qfprom@74000 {
                        compatible = "qcom,qfprom";
-                       reg = <0x74000 0x8ff>;
+                       reg = <0x00074000 0x8ff>;
                        #address-cells = <1>;
                        #size-cells = <1>;
 
@@ -1380,7 +1380,7 @@
 
                pcie_phy: phy@34000 {
                        compatible = "qcom,msm8996-qmp-pcie-phy";
-                       reg = <0x34000 0x488>;
+                       reg = <0x00034000 0x488>;
                        #clock-cells = <1>;
                        #address-cells = <1>;
                        #size-cells = <1>;
@@ -1398,9 +1398,9 @@
                        status = "disabled";
 
                        pciephy_0: lane@35000 {
-                               reg = <0x035000 0x130>,
-                                       <0x035200 0x200>,
-                                       <0x035400 0x1dc>;
+                               reg = <0x00035000 0x130>,
+                                     <0x00035200 0x200>,
+                                     <0x00035400 0x1dc>;
                                #phy-cells = <0>;
 
                                clock-output-names = "pcie_0_pipe_clk_src";
@@ -1411,9 +1411,9 @@
                        };
 
                        pciephy_1: lane@36000 {
-                               reg = <0x036000 0x130>,
-                                       <0x036200 0x200>,
-                                       <0x036400 0x1dc>;
+                               reg = <0x00036000 0x130>,
+                                     <0x00036200 0x200>,
+                                     <0x00036400 0x1dc>;
                                #phy-cells = <0>;
 
                                clock-output-names = "pcie_1_pipe_clk_src";
@@ -1424,9 +1424,9 @@
                        };
 
                        pciephy_2: lane@37000 {
-                               reg = <0x037000 0x130>,
-                                       <0x037200 0x200>,
-                                       <0x037400 0x1dc>;
+                               reg = <0x00037000 0x130>,
+                                     <0x00037200 0x200>,
+                                     <0x00037400 0x1dc>;
                                #phy-cells = <0>;
 
                                clock-output-names = "pcie_2_pipe_clk_src";
@@ -1439,7 +1439,7 @@
 
                usb3phy: phy@7410000 {
                        compatible = "qcom,msm8996-qmp-usb3-phy";
-                       reg = <0x7410000 0x1c4>;
+                       reg = <0x07410000 0x1c4>;
                        #clock-cells = <1>;
                        #address-cells = <1>;
                        #size-cells = <1>;
@@ -1456,9 +1456,9 @@
                        status = "disabled";
 
                        ssusb_phy_0: lane@7410200 {
-                               reg = <0x7410200 0x200>,
-                                       <0x7410400 0x130>,
-                                       <0x7410600 0x1a8>;
+                               reg = <0x07410200 0x200>,
+                                     <0x07410400 0x130>,
+                                     <0x07410600 0x1a8>;
                                #phy-cells = <0>;
 
                                clock-output-names = "usb3_phy_pipe_clk_src";
@@ -1469,7 +1469,7 @@
 
                hsusb_phy1: phy@7411000 {
                        compatible = "qcom,msm8996-qusb2-phy";
-                       reg = <0x7411000 0x180>;
+                       reg = <0x07411000 0x180>;
                        #phy-cells = <0>;
 
                        clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
@@ -1483,7 +1483,7 @@
 
                hsusb_phy2: phy@7412000 {
                        compatible = "qcom,msm8996-qusb2-phy";
-                       reg = <0x7412000 0x180>;
+                       reg = <0x07412000 0x180>;
                        #phy-cells = <0>;
 
                        clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
@@ -1497,7 +1497,7 @@
 
                usb2: usb@76f8800 {
                        compatible = "qcom,msm8996-dwc3", "qcom,dwc3";
-                       reg = <0x76f8800 0x400>;
+                       reg = <0x076f8800 0x400>;
                        #address-cells = <1>;
                        #size-cells = <1>;
                        ranges;
@@ -1517,7 +1517,7 @@
 
                        dwc3@7600000 {
                                compatible = "snps,dwc3";
-                               reg = <0x7600000 0xcc00>;
+                               reg = <0x07600000 0xcc00>;
                                interrupts = <0 138 IRQ_TYPE_LEVEL_HIGH>;
                                phys = <&hsusb_phy2>;
                                phy-names = "usb2-phy";
@@ -1528,7 +1528,7 @@
 
                usb3: usb@6af8800 {
                        compatible = "qcom,msm8996-dwc3", "qcom,dwc3";
-                       reg = <0x6af8800 0x400>;
+                       reg = <0x06af8800 0x400>;
                        #address-cells = <1>;
                        #size-cells = <1>;
                        ranges;
@@ -1549,7 +1549,7 @@
 
                        dwc3@6a00000 {
                                compatible = "snps,dwc3";
-                               reg = <0x6a00000 0xcc00>;
+                               reg = <0x06a00000 0xcc00>;
                                interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>;
                                phys = <&hsusb_phy1>, <&ssusb_phy_0>;
                                phy-names = "usb2-phy", "usb3-phy";
@@ -1560,7 +1560,7 @@
 
                vfe_smmu: iommu@da0000 {
                        compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
-                       reg = <0xda0000 0x10000>;
+                       reg = <0x00da0000 0x10000>;
 
                        #global-interrupts = <1>;
                        interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
@@ -1576,20 +1576,20 @@
 
                camss: camss@a00000 {
                        compatible = "qcom,msm8996-camss";
-                       reg = <0xa34000 0x1000>,
-                               <0xa00030 0x4>,
-                               <0xa35000 0x1000>,
-                               <0xa00038 0x4>,
-                               <0xa36000 0x1000>,
-                               <0xa00040 0x4>,
-                               <0xa30000 0x100>,
-                               <0xa30400 0x100>,
-                               <0xa30800 0x100>,
-                               <0xa30c00 0x100>,
-                               <0xa31000 0x500>,
-                               <0xa00020 0x10>,
-                               <0xa10000 0x1000>,
-                               <0xa14000 0x1000>;
+                       reg = <0x00a34000 0x1000>,
+                             <0x00a00030 0x4>,
+                             <0x00a35000 0x1000>,
+                             <0x00a00038 0x4>,
+                             <0x00a36000 0x1000>,
+                             <0x00a00040 0x4>,
+                             <0x00a30000 0x100>,
+                             <0x00a30400 0x100>,
+                             <0x00a30800 0x100>,
+                             <0x00a30c00 0x100>,
+                             <0x00a31000 0x500>,
+                             <0x00a00020 0x10>,
+                             <0x00a10000 0x1000>,
+                             <0x00a14000 0x1000>;
                        reg-names = "csiphy0",
                                "csiphy0_clk_mux",
                                "csiphy1",
@@ -1710,7 +1710,7 @@
 
                adreno_smmu: iommu@b40000 {
                        compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
-                       reg = <0xb40000 0x10000>;
+                       reg = <0x00b40000 0x10000>;
 
                        #global-interrupts = <1>;
                        interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
@@ -1727,7 +1727,7 @@
 
                mdp_smmu: iommu@d00000 {
                        compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
-                       reg = <0xd00000 0x10000>;
+                       reg = <0x00d00000 0x10000>;
 
                        #global-interrupts = <1>;
                        interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
@@ -1743,7 +1743,7 @@
 
                lpass_q6_smmu: iommu@1600000 {
                        compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
-                       reg = <0x1600000 0x20000>;
+                       reg = <0x01600000 0x20000>;
                        #iommu-cells = <1>;
                        power-domains = <&gcc HLOS1_VOTE_LPASS_CORE_GDSC>;
 
@@ -1930,7 +1930,7 @@
                {
                        compatible = "qcom,bam-v1.7.0";
                        qcom,controlled-remotely;
-                       reg = <0x9184000 0x32000>;
+                       reg = <0x09184000 0x32000>;
                        num-channels  = <31>;
                        interrupts = <0 164 IRQ_TYPE_LEVEL_HIGH>;
                        #dma-cells = <1>;
@@ -1940,7 +1940,7 @@
 
                slim_msm: slim@91c0000 {
                        compatible = "qcom,slim-ngd-v1.5.0";
-                       reg = <0x91c0000 0x2C000>;
+                       reg = <0x091c0000 0x2C000>;
                        reg-names = "ctrl";
                        interrupts = <0 163 IRQ_TYPE_LEVEL_HIGH>;
                        dmas =  <&slimbam 3>, <&slimbam 4>,
@@ -1984,7 +1984,7 @@
                        compatible = "qcom,adreno-530.2", "qcom,adreno";
                        #stream-id-cells = <16>;
 
-                       reg = <0xb00000 0x3f000>;
+                       reg = <0x00b00000 0x3f000>;
                        reg-names = "kgsl_3d0_reg_memory";
 
                        interrupts = <0 300 IRQ_TYPE_LEVEL_HIGH>;
@@ -2058,9 +2058,9 @@
                mdss: mdss@900000 {
                        compatible = "qcom,mdss";
 
-                       reg = <0x900000 0x1000>,
-                             <0x9b0000 0x1040>,
-                             <0x9b8000 0x1040>;
+                       reg = <0x00900000 0x1000>,
+                             <0x009b0000 0x1040>,
+                             <0x009b8000 0x1040>;
                        reg-names = "mdss_phys",
                                    "vbif_phys",
                                    "vbif_nrt_phys";
@@ -2080,7 +2080,7 @@
 
                        mdp: mdp@901000 {
                                compatible = "qcom,mdp5";
-                               reg = <0x901000 0x90000>;
+                               reg = <0x00901000 0x90000>;
                                reg-names = "mdp_phys";
 
                                interrupt-parent = <&mdss>;
@@ -2156,12 +2156,12 @@
                        hdmi_phy: hdmi-phy@9a0600 {
                                #phy-cells = <0>;
                                compatible = "qcom,hdmi-phy-8996";
-                               reg = <0x9a0600 0x1c4>,
-                                     <0x9a0a00 0x124>,
-                                     <0x9a0c00 0x124>,
-                                     <0x9a0e00 0x124>,
-                                     <0x9a1000 0x124>,
-                                     <0x9a1200 0x0c8>;
+                               reg = <0x009a0600 0x1c4>,
+                                     <0x009a0a00 0x124>,
+                                     <0x009a0c00 0x124>,
+                                     <0x009a0e00 0x124>,
+                                     <0x009a1000 0x124>,
+                                     <0x009a1200 0x0c8>;
                                reg-names = "hdmi_pll",
                                            "hdmi_tx_l0",
                                            "hdmi_tx_l1",