libertas: better association request debugging

Bring back the comment about FW v5 status codes from the pre-cfg80211
driver, and let through status codes that aren't remapped by the
firmware.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/libertas/cfg.c b/drivers/net/wireless/libertas/cfg.c
index 8bf88fa..08487a8 100644 (file)
--- a/drivers/net/wireless/libertas/cfg.c
+++ b/drivers/net/wireless/libertas/cfg.c
@@ -1117,7 +1117,7 @@ static int lbs_associate(struct lbs_private *priv,
        lbs_deb_hex(LBS_DEB_ASSOC, "Common Rates", tmp, pos - tmp);
 
        /* add auth type TLV */
-       if (priv->fwrelease >= 0x09000000)
+       if (MRVL_FW_MAJOR_REV(priv->fwrelease) >= 9)
                pos += lbs_add_auth_type_tlv(pos, sme->auth_type);
 
        /* add WPA/WPA2 TLV */
@@ -1128,6 +1128,9 @@ static int lbs_associate(struct lbs_private *priv,
                (u16)(pos - (u8 *) &cmd->iebuf);
        cmd->hdr.size = cpu_to_le16(len);
 
+       lbs_deb_hex(LBS_DEB_ASSOC, "ASSOC_CMD", (u8 *) cmd,
+                       le16_to_cpu(cmd->hdr.size));
+
        /* store for later use */
        memcpy(priv->assoc_bss, bss->bssid, ETH_ALEN);
 
@@ -1135,14 +1138,28 @@ static int lbs_associate(struct lbs_private *priv,
        if (ret)
                goto done;
 
-
        /* generate connect message to cfg80211 */
 
        resp = (void *) cmd; /* recast for easier field access */
        status = le16_to_cpu(resp->statuscode);
 
-       /* Convert statis code of old firmware */
-       if (priv->fwrelease < 0x09000000)
+       /* Older FW versions map the IEEE 802.11 Status Code in the association
+        * response to the following values returned in resp->statuscode:
+        *
+        *    IEEE Status Code                Marvell Status Code
+        *    0                       ->      0x0000 ASSOC_RESULT_SUCCESS
+        *    13                      ->      0x0004 ASSOC_RESULT_AUTH_REFUSED
+        *    14                      ->      0x0004 ASSOC_RESULT_AUTH_REFUSED
+        *    15                      ->      0x0004 ASSOC_RESULT_AUTH_REFUSED
+        *    16                      ->      0x0004 ASSOC_RESULT_AUTH_REFUSED
+        *    others                  ->      0x0003 ASSOC_RESULT_REFUSED
+        *
+        * Other response codes:
+        *    0x0001 -> ASSOC_RESULT_INVALID_PARAMETERS (unused)
+        *    0x0002 -> ASSOC_RESULT_TIMEOUT (internal timer expired waiting for
+        *                                    association response from the AP)
+        */
+       if (MRVL_FW_MAJOR_REV(priv->fwrelease) <= 8) {
                switch (status) {
                case 0:
                        break;
@@ -1164,11 +1181,16 @@ static int lbs_associate(struct lbs_private *priv,
                        break;
                default:
                        lbs_deb_assoc("association failure %d\n", status);
-                       status = WLAN_STATUS_UNSPECIFIED_FAILURE;
+                       /* v5 OLPC firmware does return the AP status code if
+                        * it's not one of the values above.  Let that through.
+                        */
+                       break;
+               }
        }
 
-       lbs_deb_assoc("status %d, capability 0x%04x\n", status,
-                     le16_to_cpu(resp->capability));
+       lbs_deb_assoc("status %d, statuscode 0x%04x, capability 0x%04x, "
+                     "aid 0x%04x\n", status, le16_to_cpu(resp->statuscode),
+                     le16_to_cpu(resp->capability), le16_to_cpu(resp->aid));
 
        resp_ie_len = le16_to_cpu(resp->hdr.size)
                - sizeof(resp->hdr)
@@ -1188,7 +1210,6 @@ static int lbs_associate(struct lbs_private *priv,
                        netif_tx_wake_all_queues(priv->dev);
        }
 
-
 done:
        lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret);
        return ret;