config MMU
def_bool y
-config NO_IOPORT
+config NO_IOPORT_MAP
def_bool y
config GENERIC_CALIBRATE_DELAY
config HAVE_PROC_CPU
bool
-config NO_IOPORT
+config NO_IOPORT_MAP
bool
config EISA
select ISA
select NEED_MACH_IO_H
select NEED_MACH_MEMORY_H
- select NO_IOPORT
+ select NO_IOPORT_MAP
help
This is an evaluation board for the StrongARM processor available
from Digital. It has limited hardware on-board, including an
select CPU_V7M
select GENERIC_CLOCKEVENTS
select NO_DMA
- select NO_IOPORT
+ select NO_IOPORT_MAP
select SPARSE_IRQ
select USE_OF
help
select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
select MULTI_IRQ_HANDLER
- select NO_IOPORT
+ select NO_IOPORT_MAP
select PINCTRL
select PM_GENERIC_DOMAINS if PM
select SPARSE_IRQ
select ISA_DMA_API
select NEED_MACH_IO_H
select NEED_MACH_MEMORY_H
- select NO_IOPORT
+ select NO_IOPORT_MAP
select VIRT_TO_BUS
help
On the Acorn Risc-PC, Linux can support the internal IDE disk and
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
select HAVE_TCM
- select NO_IOPORT
+ select NO_IOPORT_MAP
select PLAT_SAMSUNG
select PM_GENERIC_DOMAINS
select S3C_DEV_NAND
select CPU_V6K
select DW_APB_TIMER_OF
select HAVE_TCM
- select NO_IOPORT
+ select NO_IOPORT_MAP
bool "CSR SiRF" if ARCH_MULTI_V7
select ARCH_REQUIRE_GPIOLIB
select GENERIC_IRQ_CHIP
- select NO_IOPORT
+ select NO_IOPORT_MAP
select PINCTRL
select PINCTRL_SIRF
help
config PLAT_S3C24XX
def_bool y
select ARCH_REQUIRE_GPIOLIB
- select NO_IOPORT
+ select NO_IOPORT_MAP
select S3C_DEV_NAND
select IRQ_DOMAIN
help
select ARM_GIC
select MIGHT_HAVE_PCI
select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
- select NO_IOPORT
+ select NO_IOPORT_MAP
select PINCTRL
select ARCH_REQUIRE_GPIOLIB
select HAVE_ARM_TWD if SMP
select HAVE_PATA_PLATFORM
select ICST
- select NO_IOPORT
+ select NO_IOPORT_MAP
select PLAT_VERSATILE
select PLAT_VERSATILE_CLCD
select POWER_RESET
depends on PLAT_S3C24XX || ARCH_S3C64XX || PLAT_S5P || ARCH_EXYNOS
default y
select GENERIC_IRQ_CHIP
- select NO_IOPORT
+ select NO_IOPORT_MAP
help
Base platform code for all Samsung SoC based systems
default y
select ARCH_REQUIRE_GPIOLIB
select ARM_VIC
- select NO_IOPORT
+ select NO_IOPORT_MAP
select PLAT_SAMSUNG
select S3C_GPIO_TRACK
select S5P_GPIO_DRVSTR
config MMU
def_bool y
-config NO_IOPORT
+config NO_IOPORT_MAP
def_bool y
config STACKTRACE_SUPPORT
bool
default y
-config NO_IOPORT
+config NO_IOPORT_MAP
def_bool y
config FORCE_MAX_ZONEORDER
select GENERIC_IRQ_SHOW
select HAVE_ARCH_KGDB
select HAVE_ARCH_TRACEHOOK
- select NO_IOPORT
+ select NO_IOPORT_MAP
select GENERIC_IOMAP
select GENERIC_SMP_IDLE_THREAD
select STACKTRACE_SUPPORT
bool
default y
-config NO_IOPORT
+config NO_IOPORT_MAP
def_bool y
config NO_DMA
bool
default y
-config NO_IOPORT
+config NO_IOPORT_MAP
def_bool y
config NO_DMA
config GENERIC_CALIBRATE_DELAY
def_bool y
-config NO_IOPORT
+config NO_IOPORT_MAP
def_bool y
source "init/Kconfig"
select CPU_R4000_WORKAROUNDS if 64BIT
select CPU_R4400_WORKAROUNDS if 64BIT
select DMA_NONCOHERENT
- select NO_IOPORT
+ select NO_IOPORT_MAP
select IRQ_CPU
select SYS_HAS_CPU_R3000
select SYS_HAS_CPU_R4X00
config MIPS_MACHINE
def_bool n
-config NO_IOPORT
+config NO_IOPORT_MAP
def_bool n
config GENERIC_ISA_DMA
config GENERIC_HWEIGHT
def_bool y
-config NO_IOPORT
+config NO_IOPORT_MAP
def_bool y
config TRACE_IRQFLAGS_SUPPORT
config AUDIT_ARCH
def_bool y
-config NO_IOPORT
+config NO_IOPORT_MAP
def_bool y
config PCI_QUIRKS
select ARCH_MIGHT_HAVE_PC_PARPORT
select EXPERT
select CLKDEV_LOOKUP
- select HAVE_IDE if HAS_IOPORT
+ select HAVE_IDE if HAS_IOPORT_MAP
select HAVE_MEMBLOCK
select HAVE_MEMBLOCK_NODE_MAP
select ARCH_DISCARD_MEMBLOCK
config ARCH_HAS_ILOG2_U64
def_bool n
-config NO_IOPORT
+config NO_IOPORT_MAP
def_bool !PCI
depends on !SH_CAYMAN && !SH_SH4202_MICRODEV && !SH_SHMIN && \
!SH_HP6XX && !SH_SOLUTION_ENGINE
bool "SDK7786"
depends on CPU_SUBTYPE_SH7786
select SYS_SUPPORTS_PCI
- select NO_IOPORT if !PCI
+ select NO_IOPORT_MAP if !PCI
select ARCH_WANT_OPTIONAL_GPIOLIB
select HAVE_SRAM_POOL
select REGULATOR_FIXED_VOLTAGE if REGULATOR
depends on CPU_SUBTYPE_SH7786
select ARCH_REQUIRE_GPIOLIB
select SYS_SUPPORTS_PCI
- select NO_IOPORT if !PCI
+ select NO_IOPORT_MAP if !PCI
config SH_MIGOR
bool "Migo-R"
config SH_X3PROTO
bool "SH-X3 Prototype board"
depends on CPU_SUBTYPE_SHX3
- select NO_IOPORT if !PCI
+ select NO_IOPORT_MAP if !PCI
select IRQ_DOMAIN
config SH_MAGIC_PANEL_R2
config SH_SH2007
bool "SH-2007 board"
- select NO_IOPORT
+ select NO_IOPORT_MAP
select REGULATOR_FIXED_VOLTAGE if REGULATOR
depends on CPU_SUBTYPE_SH7780
help
__BUILD_MEMORY_STRING(__raw_, q, u64)
-#ifdef CONFIG_HAS_IOPORT
+#ifdef CONFIG_HAS_IOPORT_MAP
/*
* Slowdown I/O port space accesses for antique hardware.
__BUILD_IOPORT_STRING(l, u32)
__BUILD_IOPORT_STRING(q, u64)
-#else /* !CONFIG_HAS_IOPORT */
+#else /* !CONFIG_HAS_IOPORT_MAP */
#include <asm/io_noioport.h>
#define __ioremap_trapped(offset, size) NULL
#endif
-#ifdef CONFIG_HAS_IOPORT
+#ifdef CONFIG_HAS_IOPORT_MAP
extern struct list_head trapped_io;
static inline void __iomem *
int (*mv_irq_demux)(int irq);
void (*mv_init_irq)(void);
-#ifdef CONFIG_HAS_IOPORT
+#ifdef CONFIG_HAS_IOPORT_MAP
void __iomem *(*mv_ioport_map)(unsigned long port, unsigned int size);
void (*mv_ioport_unmap)(void __iomem *);
#endif
ifndef CONFIG_GENERIC_IOMAP
obj-y += iomap.o
-obj-$(CONFIG_HAS_IOPORT) += ioport.o
+obj-$(CONFIG_HAS_IOPORT_MAP) += ioport.o
endif
obj-$(CONFIG_SUPERH32) += sys_sh32.o
#define TRAPPED_PAGES_MAX 16
-#ifdef CONFIG_HAS_IOPORT
+#ifdef CONFIG_HAS_IOPORT_MAP
LIST_HEAD(trapped_io);
EXPORT_SYMBOL_GPL(trapped_io);
#endif
tiop->magic = IO_TRAPPED_MAGIC;
INIT_LIST_HEAD(&tiop->list);
spin_lock_irq(&trapped_lock);
-#ifdef CONFIG_HAS_IOPORT
+#ifdef CONFIG_HAS_IOPORT_MAP
if (flags & IORESOURCE_IO)
list_add(&tiop->list, &trapped_io);
#endif
config NO_IOMEM
def_bool !PCI
-config NO_IOPORT
+config NO_IOPORT_MAP
def_bool !PCI
config TILE_PCI_IO
config GENERIC_CSUM
def_bool y
-config NO_IOPORT
+config NO_IOPORT_MAP
bool
config STACKTRACE_SUPPORT
config ARCH_HAS_ILOG2_U64
def_bool n
-config NO_IOPORT
+config NO_IOPORT_MAP
def_bool n
config HZ
config XTENSA_PLATFORM_S6105
bool "S6105"
select SERIAL_CONSOLE
- select NO_IOPORT
+ select NO_IOPORT_MAP
config XTENSA_PLATFORM_XTFPGA
bool "XTFPGA"
CONFIG_GENERIC_HWEIGHT=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_NO_IOPORT=y
+CONFIG_NO_IOPORT_MAP=y
CONFIG_HZ=100
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
CONFIG_GENERIC_HWEIGHT=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_NO_IOPORT=y
+CONFIG_NO_IOPORT_MAP=y
CONFIG_HZ=100
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
config TCG_ATMEL
tristate "Atmel TPM Interface"
- depends on PPC64 || HAS_IOPORT
+ depends on PPC64 || HAS_IOPORT_MAP
---help---
If you have a TPM security chip from Atmel say Yes and it
will be accessible from within Linux. To compile this driver
config I2C_ELEKTOR
tristate "Elektor ISA card"
- depends on ISA && HAS_IOPORT && BROKEN_ON_SMP
+ depends on ISA && HAS_IOPORT_MAP && BROKEN_ON_SMP
select I2C_ALGOPCF
help
This supports the PCF8584 ISA bus I2C adapter. Say Y if you own
config CAN_PEAK_PCMCIA
tristate "PEAK PCAN-PC Card"
depends on PCMCIA
- depends on HAS_IOPORT
+ depends on HAS_IOPORT_MAP
---help---
This driver is for the PCAN-PC Card PCMCIA adapter (1 or 2 channels)
from PEAK-System (http://www.peak-system.com). To compile this
config VORTEX
tristate "3c590/3c900 series (592/595/597) \"Vortex/Boomerang\" support"
- depends on (PCI || EISA) && HAS_IOPORT
+ depends on (PCI || EISA) && HAS_IOPORT_MAP
select MII
---help---
This option enables driver support for a large number of 10Mbps and
}
#endif /* CONFIG_MMU */
-#ifdef CONFIG_HAS_IOPORT
+#ifdef CONFIG_HAS_IOPORT_MAP
#ifndef CONFIG_GENERIC_IOMAP
static inline void __iomem *ioport_map(unsigned long port, unsigned int nr)
{
extern void __iomem *ioport_map(unsigned long port, unsigned int nr);
extern void ioport_unmap(void __iomem *p);
#endif /* CONFIG_GENERIC_IOMAP */
-#endif /* CONFIG_HAS_IOPORT */
+#endif /* CONFIG_HAS_IOPORT_MAP */
#ifndef xlate_dev_kmem_ptr
#define xlate_dev_kmem_ptr(p) p
extern void iowrite16_rep(void __iomem *port, const void *buf, unsigned long count);
extern void iowrite32_rep(void __iomem *port, const void *buf, unsigned long count);
-#ifdef CONFIG_HAS_IOPORT
+#ifdef CONFIG_HAS_IOPORT_MAP
/* Create a virtual mapping cookie for an IO port range */
extern void __iomem *ioport_map(unsigned long port, unsigned int nr);
extern void ioport_unmap(void __iomem *);
/*
* Managed iomap interface
*/
-#ifdef CONFIG_HAS_IOPORT
+#ifdef CONFIG_HAS_IOPORT_MAP
void __iomem * devm_ioport_map(struct device *dev, unsigned long port,
unsigned int nr);
void devm_ioport_unmap(struct device *dev, void __iomem *addr);
select GENERIC_IO
default y
-config HAS_IOPORT
+config HAS_IOPORT_MAP
boolean
- depends on HAS_IOMEM && !NO_IOPORT
+ depends on HAS_IOMEM && !NO_IOPORT_MAP
default y
config HAS_DMA
}
EXPORT_SYMBOL(devm_request_and_ioremap);
-#ifdef CONFIG_HAS_IOPORT
+#ifdef CONFIG_HAS_IOPORT_MAP
/*
* Generic iomap devres
*/
devm_ioport_map_match, (void *)addr));
}
EXPORT_SYMBOL(devm_ioport_unmap);
-#endif /* CONFIG_HAS_IOPORT */
+#endif /* CONFIG_HAS_IOPORT_MAP */
#ifdef CONFIG_PCI
/*
EXPORT_SYMBOL(iowrite16_rep);
EXPORT_SYMBOL(iowrite32_rep);
-#ifdef CONFIG_HAS_IOPORT
+#ifdef CONFIG_HAS_IOPORT_MAP
/* Create a virtual mapping cookie for an IO port range */
void __iomem *ioport_map(unsigned long port, unsigned int nr)
{
}
EXPORT_SYMBOL(ioport_map);
EXPORT_SYMBOL(ioport_unmap);
-#endif /* CONFIG_HAS_IOPORT */
+#endif /* CONFIG_HAS_IOPORT_MAP */
#ifdef CONFIG_PCI
/* Hide the details if this is a MMIO or PIO address space and just do what
config SND_SC6000
tristate "Gallant SC-6000/6600/7000 and Audio Excel DSP 16"
- depends on HAS_IOPORT
+ depends on HAS_IOPORT_MAP
select SND_WSS_LIB
select SND_OPL3_LIB
select SND_MPU401_UART
config SND_LX6464ES
tristate "Digigram LX6464ES"
- depends on HAS_IOPORT
+ depends on HAS_IOPORT_MAP
select SND_PCM
help
Say Y here to include support for Digigram LX6464ES boards.
projects / platform / kernel / linux-stable.git / commitdiff