artik5: enable gpt partition table

This patch update artik5 configurations to support gp partition table
map. The gpt partition could be generated below comand:

gpt write mmc 0 $partitions

The partition table is defined $partitions environment and gpt command
could make a gpt table from the environment.

Signed-off-by: Chanho Park <chanho61.park@samsung.com>

diff --git a/include/configs/artik5.h b/include/configs/artik5.h
index aa31405f4f96cd624213b3e15a5d709fdcccad44..cea2b5f7f5be57bef0f22641695f14843d0396e0 100755 (executable)
--- a/include/configs/artik5.h
+++ b/include/configs/artik5.h
@@ -175,7 +175,7 @@
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_ELF
 #define CONFIG_CMD_MMC
-#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_EXT4
 #define CONFIG_CMD_FAT
 
 #define CONFIG_CMD_MOVI
@@ -226,7 +226,7 @@
 #define CFG_FASTBOOT_ADDR_RAMDISK               (0x41000000)
 #define CFG_FASTBOOT_PAGESIZE                   (2048)  // Page size of booting device
 #define CFG_FASTBOOT_SDMMC_BLOCKSIZE            (512)   // Block size of sdmmc
-#undef CONFIG_EFI_PARTITION
+
 #ifdef CONFIG_EFI_PARTITION
 #define CONFIG_PRI_GPT_SIZE    (34 * 512)
 #define CONFIG_SEC_GPT_SIZE    (33 * 512)
@@ -252,7 +252,7 @@
                                "movi read kernel 0 40008000;movi read rootfs 0 41000000 100000;bootz 40008000 41000000"
 #else
 /*#define CONFIG_BOOTCOMMAND   "movi read kernel 0 40008000;movi read rootfs 0 41000000 200000;bootz 40008000 41000000"*/
-#define CONFIG_BOOTCOMMAND     "movi read kernel 0 40008000;movi read rootfs 0 41000000 1000000;bootz 40008000 41000000"       /* nermy - for ramdisk */
+#define CONFIG_BOOTCOMMAND     "movi read kernel 0 40008000;movi read rootfs 0 41000000 1000000;bootz 40008000 41000000"
 #endif
 
 #define CONFIG_BOOTCOMMAND_VIA_SCRIPT "movi init 1;fatload mmc 1 0x40000000 booting_script;source 0x40000000"
@@ -385,15 +385,12 @@
 /* Configuration of ENV size on mmc */
 #define CONFIG_ENV_SIZE                (16 << 10)      /* 16 KB */
 
-#define CONFIG_BOOT_LOGO
-#define CONFIG_CHARGER_LOGO
-
 #include <asm/arch/movi_partition.h>
 
 /* Configuration of ROOTFS_ATAGS */
 #define CONFIG_ROOTFS_ATAGS
 #ifdef CONFIG_ROOTFS_ATAGS
-#define CONFIG_EXTRA_ENV_SETTINGS       "rootfslen= 100000"
+#define CONFIG_ROOTFS_LEN      100000
 #endif
 /* Configuration for Partition */
 #define CONFIG_DOS_PARTITION
@@ -401,6 +398,38 @@
 #define CFG_PARTITION_START     0x6400000
 #define CONFIG_IRAM_STACK      0x02060000
 
+/* GPT */
+#define CONFIG_RANDOM_UUID
+#define CONFIG_EFI_PARTITION
+#define CONFIG_PARTITION_UUIDS
+#define CONFIG_CMD_GPT
+#define CONFIG_CMD_PART
+
+#define CONFIG_KERNEL_OFFSET   1
+#define CONFIG_KERNEL_PART_SIZE                8
+#define CONFIG_RAMDISK_PART_SIZE       16
+#define CONFIG_ROOTFS_PART_SIZE                3072
+#define CONFIG_RECOVERY_PARTITION
+
+#ifdef CONFIG_RECOVERY_PARTITION
+#define CONFIG_ROOTFS_OFFSET           49
+#else
+#define CONFIG_ROOTFS_OFFSET           25
+#endif
+
+#define PARTS_DEFAULT \
+       "uuid_disk=${uuid_gpt_disk};" \
+       "name=rootfs,start=" __stringify(CONFIG_ROOTFS_OFFSET) "MiB,size=" \
+               __stringify(CONFIG_ROOTFS_PART_SIZE) "MiB,uuid=${uuid_gpt_rootfs};" \
+       "name=data,size=-,uuid=${uuid_gpt_data}\0"
+
+#define CONFIG_EXTRA_ENV_SETTINGS      \
+       "console=" CONFIG_DEFAULT_CONSOLE \
+       "consoleon=set console console=" CONFIG_DEFAULT_CONSOLE "; saveenv; reset\0" \
+       "consoleoff=set console console=ram; saveenv; reset\0" \
+       "rootfslen=" __stringify(CONFIG_ROOTFS_LEN) "\0"        \
+       "partitions=" PARTS_DEFAULT
+
 #define CONFIG_SYS_INIT_SP_ADDR        (CONFIG_SYS_LOAD_ADDR - 0x1000000)
 
 /* Ethernet Controllor Driver */