include/configs: Use new CONFIG_CMD_* in sbc* board config files.

Signed-off-by: Jon Loeliger <jdl@freescale.com>

diff --git a/include/configs/sbc2410x.h b/include/configs/sbc2410x.h
index 866f7b0..fe06be6 100644 (file)
--- a/include/configs/sbc2410x.h
+++ b/include/configs/sbc2410x.h
@@ -82,24 +82,20 @@
 
 #define CONFIG_BAUDRATE                115200
 
-/***********************************************************
- * Command definition
- ***********************************************************/
-#define CONFIG_COMMANDS \
-                       (CONFIG_CMD_DFL  | \
-                       CFG_CMD_CACHE    | \
-                       /*CFG_CMD_NAND   |*/ \
-                       /*CFG_CMD_EEPROM |*/ \
-                       /*CFG_CMD_I2C    |*/ \
-                       /*CFG_CMD_USB    |*/ \
-                       CFG_CMD_REGINFO  | \
-                       CFG_CMD_DATE     | \
-                       CFG_CMD_PING     | \
-                       CFG_CMD_DHCP     | \
-                       CFG_CMD_ELF)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+
 
 #define CONFIG_BOOTDELAY       3
 #define CONFIG_BOOTARGS        "console=ttySAC0 root=/dev/nfs nfsroot=192.168.0.1:/friendly-arm/rootfs_netserv ip=192.168.0.69:192.168.0.1:192.168.0.1:255.255.255.0:debian:eth0:off"
@@ -110,7 +106,7 @@
 /*#define CONFIG_BOOTFILE      "elinos-lart" */
 #define CONFIG_BOOTCOMMAND     "dhcp; bootm"
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   115200          /* speed to run kgdb serial port */
 /* what's this ? it's not used anywhere */
 #define CONFIG_KGDB_SER_INDEX  1               /* which serial port to use */
@@ -193,7 +189,7 @@
 /*-----------------------------------------------------------------------
  * NAND flash settings
  */
-#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+#if defined(CONFIG_CMD_NAND)
 #define CFG_MAX_NAND_DEVICE    1       /* Max number of NAND devices           */
 #define SECTORSIZE 512
 
@@ -219,7 +215,7 @@
 #define NAND_CTL_CLRCLE(nandptr)
 #define NAND_CTL_SETCLE(nandptr)
 /* #undef CONFIG_MTD_NAND_VERIFY_WRITE */
-#endif /* CONFIG_COMMANDS & CFG_CMD_NAND */
+#endif /* CONFIG_CMD_NAND */
 
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG

diff --git a/include/configs/sbc405.h b/include/configs/sbc405.h
index beff28a..af34dbb 100644 (file)
--- a/include/configs/sbc405.h
+++ b/include/configs/sbc405.h
@@ -88,19 +88,21 @@
 
 #define CONFIG_ENV_OVERWRITE
 
-#define CONFIG_COMMANDS        ( CONFIG_CMD_DFL        | \
-                               CFG_CMD_BSP     | \
-                               CFG_CMD_ELF     | \
-                               CFG_CMD_I2C     | \
-                               CFG_CMD_IRQ     | \
-                               CFG_CMD_MII     | \
-                               CFG_CMD_PCI     | \
-                               CFG_CMD_PING    | \
-                               CFG_CMD_SDRAM   | \
-                               0 )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SDRAM
+
 
 #undef CONFIG_WATCHDOG                 /* watchdog disabled            */
 
@@ -123,7 +125,7 @@
 #define CFG_PROMPT_HUSH_PS2    "> "
 #endif
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE     1024            /* Console I/O Buffer Size      */
 #else
 #define CFG_CBSIZE     256             /* Console I/O Buffer Size      */
@@ -229,7 +231,7 @@
 #define CFG_DCACHE_SIZE                16384   /* For AMCC 405 CPUs, older 405 ppc's   */
                                        /* have only 8kB, 16kB is save here     */
 #define CFG_CACHELINE_SIZE     32      /* ...                                  */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT    5       /* log base 2 of the above value        */
 #endif
 

diff --git a/include/configs/sbc8240.h b/include/configs/sbc8240.h
index d891e07..b81858b 100644 (file)
--- a/include/configs/sbc8240.h
+++ b/include/configs/sbc8240.h
@@ -79,20 +79,21 @@
 
 #define CONFIG_ENV_OVERWRITE
 
-#define CONFIG_COMMANDS        ( CONFIG_CMD_DFL | \
-                                 CFG_CMD_BSP    | \
-                                 CFG_CMD_DIAG   | \
-                                 CFG_CMD_ELF    | \
-                                 CFG_CMD_ENV    | \
-                                 CFG_CMD_FLASH  | \
-                                 CFG_CMD_PCI    | \
-                                 CFG_CMD_PING   | \
-                                 CFG_CMD_SDRAM  | \
-                                 0 )
-
-/* This must be included AFTER the definition of CONFIG_COMMANDS (if any)
+
+/*
+ * Command line configuration.
  */
-#include <cmd_confdefs.h>
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SDRAM
+
 
 /*
  * Miscellaneous configurable options
@@ -340,7 +341,7 @@ typedef unsigned int led_id_t;
  * Cache Configuration
  */
 #define CFG_CACHELINE_SIZE     32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #  define CFG_CACHELINE_SHIFT  5       /* log base 2 of the above value        */
 #endif
 

diff --git a/include/configs/sbc8260.h b/include/configs/sbc8260.h
index 9cf0654..2a209d3 100644 (file)
--- a/include/configs/sbc8260.h
+++ b/include/configs/sbc8260.h
@@ -444,27 +444,26 @@
  */
 #define CONFIG_VERSION_VARIABLE
 
-/* What U-Boot subsytems do you want enabled? */
-#ifdef CONFIG_ETHER_ON_FCC
-# define CONFIG_COMMANDS       (((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \
-                               CFG_CMD_ASKENV  | \
-                               CFG_CMD_ELF     | \
-                               CFG_CMD_I2C     | \
-                               CFG_CMD_IMMAP   | \
-                               CFG_CMD_MII     | \
-                               CFG_CMD_PING    | \
-                               CFG_CMD_REGINFO | \
-                               CFG_CMD_SDRAM   )
-#else
-# define CONFIG_COMMANDS       (((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \
-                               CFG_CMD_ASKENV  | \
-                               CFG_CMD_ELF     | \
-                               CFG_CMD_I2C     | \
-                               CFG_CMD_IMMAP   | \
-                               CFG_CMD_PING    | \
-                               CFG_CMD_REGINFO | \
-                               CFG_CMD_SDRAM   )
-#endif /* CONFIG_ETHER_ON_FCC */
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SDRAM
+
+#undef CONFIG_CMD_KGDB
+
+#if defined(CONFIG_ETHER_ON_FCC)
+    #define CONFIG_CMD_CMD_MII
+#endif
+
 
 #undef CONFIG_WATCHDOG                         /* disable the watchdog */
 
@@ -481,13 +480,11 @@
 #define CONFIG_SBC8260         1       /* on an EST SBC8260 Board  */
 #define CONFIG_CPM2            1       /* Has a CPM2 */
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
 
 /*
  * Miscellaneous configurable options
  */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #  define CFG_CBSIZE           1024    /* Console I/O Buffer Size           */
 #else
 #  define CFG_CBSIZE           256     /* Console I/O Buffer Size           */
@@ -627,7 +624,7 @@
  */
 #define CFG_CACHELINE_SIZE     32      /* For MPC8260 CPU */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 # define CFG_CACHELINE_SHIFT   5       /* log base 2 of the above value */
 #endif
 

diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h
index e6e3866..81322df 100644 (file)
--- a/include/configs/sbc8349.h
+++ b/include/configs/sbc8349.h
@@ -439,40 +439,25 @@
 #define CONFIG_LOADS_ECHO      1       /* echo on for serial download */
 #define CFG_LOADS_BAUD_CHANGE  1       /* allow baudrate change */
 
-#if defined(CFG_RAMBOOT)
-#if defined(CONFIG_PCI)
-#define  CONFIG_COMMANDS       ((CONFIG_CMD_DFL        \
-                                | CFG_CMD_PING         \
-                                | CFG_CMD_PCI          \
-                                | CFG_CMD_I2C)         \
-                               &                       \
-                                ~(CFG_CMD_ENV          \
-                                 | CFG_CMD_LOADS))
-#else
-#define  CONFIG_COMMANDS       ((CONFIG_CMD_DFL        \
-                                | CFG_CMD_PING         \
-                                | CFG_CMD_I2C)         \
-                               &                       \
-                                ~(CFG_CMD_ENV          \
-                                 | CFG_CMD_LOADS))
-#endif
-#else
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+
 #if defined(CONFIG_PCI)
-#define  CONFIG_COMMANDS       (CONFIG_CMD_DFL         \
-                               | CFG_CMD_PCI           \
-                               | CFG_CMD_PING          \
-                               | CFG_CMD_I2C           \
-                               )
-#else
-#define  CONFIG_COMMANDS       (CONFIG_CMD_DFL         \
-                               | CFG_CMD_PING          \
-                               | CFG_CMD_I2C           \
-                               | CFG_CMD_MII           \
-                               )
+    #define CONFG_CMD_PCI
 #endif
+
+#if defined(CFG_RAMBOOT)
+    #undef CONFIG_CMD_ENV
+    #undef CONFIG_CMD_LOADS
 #endif
 
-#include <cmd_confdefs.h>
 
 #undef CONFIG_WATCHDOG                 /* watchdog disabled */
 
@@ -483,7 +468,7 @@
 #define CFG_LOAD_ADDR  0x2000000       /* default load address */
 #define CFG_PROMPT     "=> "           /* Monitor Command Prompt */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
        #define CFG_CBSIZE      1024            /* Console I/O Buffer Size */
 #else
        #define CFG_CBSIZE      256             /* Console I/O Buffer Size */
@@ -504,7 +489,7 @@
 /* Cache Configuration */
 #define CFG_DCACHE_SIZE                32768
 #define CFG_CACHELINE_SIZE     32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT    5       /*log base 2 of the above value*/
 #endif
 
@@ -655,7 +640,7 @@
 #define BOOTFLAG_COLD  0x01    /* Normal Power-On: Boot from FLASH */
 #define BOOTFLAG_WARM  0x02    /* Software reboot */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed of kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 #endif