Documentation: devicetree: Add DT bindings to eeprom_93xx46 driver.
authorCory Tusar <cory.tusar@pid1solutions.com>
Thu, 7 Jan 2016 03:55:01 +0000 (22:55 -0500)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Wed, 10 Feb 2016 01:27:45 +0000 (17:27 -0800)
This commit documents bindings to be added to the eeprom_93xx46 driver
which will allow:

  - Device word size and read-only attributes to be specified.
  - A device-specific compatible string for use with Atmel AT93C46D
    EEPROMs.
  - Specifying a GPIO line to function as a 'select' or 'enable' signal
    prior to accessing the EEPROM.

Signed-off-by: Cory Tusar <cory.tusar@pid1solutions.com>
Acked-by: Rob Herring <robh@kernel.org>
Tested-by: Chris Healy <chris.healy@zii.aero>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Documentation/devicetree/bindings/misc/eeprom-93xx46.txt [new file with mode: 0644]

diff --git a/Documentation/devicetree/bindings/misc/eeprom-93xx46.txt b/Documentation/devicetree/bindings/misc/eeprom-93xx46.txt
new file mode 100644 (file)
index 0000000..a8ebb46
--- /dev/null
@@ -0,0 +1,25 @@
+EEPROMs (SPI) compatible with Microchip Technology 93xx46 family.
+
+Required properties:
+- compatible : shall be one of:
+    "atmel,at93c46d"
+    "eeprom-93xx46"
+- data-size : number of data bits per word (either 8 or 16)
+
+Optional properties:
+- read-only : parameter-less property which disables writes to the EEPROM
+- select-gpios : if present, specifies the GPIO that will be asserted prior to
+  each access to the EEPROM (e.g. for SPI bus multiplexing)
+
+Property rules described in Documentation/devicetree/bindings/spi/spi-bus.txt
+apply.  In particular, "reg" and "spi-max-frequency" properties must be given.
+
+Example:
+       eeprom@0 {
+               compatible = "eeprom-93xx46";
+               reg = <0>;
+               spi-max-frequency = <1000000>;
+               spi-cs-high;
+               data-size = <8>;
+               select-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;
+       };