[media] em28xx: don't treat device as webcam if an unknown sensor is detected

With an unknown sensor, norm_maxw() and norm_maxh() return 0 as max.
height and width values, which causes a devide by zero in size_to_scale().
Of course we could use speculative default values for unknown sensors,
but the chance that the device works at this resolution without any
driver/setup is very low and therefore not worth the efforts.
Instead, just don't treat the device as camera.
A message will then be printed to the log that the device isn't supported.

Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

diff --git a/drivers/media/usb/em28xx/em28xx-cards.c b/drivers/media/usb/em28xx/em28xx-cards.c
index 6fb6049..a12b599 100644 (file)
--- a/drivers/media/usb/em28xx/em28xx-cards.c
+++ b/drivers/media/usb/em28xx/em28xx-cards.c
@@ -2919,7 +2919,9 @@ static void em28xx_card_setup(struct em28xx *dev)
         * If sensor is not found, then it isn't a webcam.
         */
        if (dev->board.is_webcam) {
-               if (em28xx_detect_sensor(dev) < 0)
+               em28xx_detect_sensor(dev);
+               if (dev->em28xx_sensor == EM28XX_NOSENSOR)
+                       /* NOTE: error/unknown sensor/no sensor */
                        dev->board.is_webcam = 0;
        }
 
@@ -3667,9 +3669,11 @@ static int em28xx_usb_probe(struct usb_interface *interface,
                try_bulk = usb_xfer_mode > 0;
        }
 
-       /* Disable V4L2 if the device doesn't have a decoder */
+       /* Disable V4L2 if the device doesn't have a decoder or image sensor */
        if (has_video &&
-           dev->board.decoder == EM28XX_NODECODER && !dev->board.is_webcam) {
+           dev->board.decoder == EM28XX_NODECODER &&
+           dev->em28xx_sensor == EM28XX_NOSENSOR) {
+
                dev_err(&interface->dev,
                        "Currently, V4L2 is not supported on this model\n");
                has_video = false;