static void __init balloon3_map_io(void)
{
- pxa_map_io();
+ pxa27x_map_io();
iotable_init(balloon3_io_desc, ARRAY_SIZE(balloon3_io_desc));
}
MACHINE_START(CAPC7117,
"Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
.timer = &pxa_timer,
.init_machine = capc7117_init
static void __init cmx2xx_map_io(void)
{
- pxa_map_io();
+ if (cpu_is_pxa25x())
+ pxa25x_map_io();
+
+ if (cpu_is_pxa27x())
+ pxa27x_map_io();
+
iotable_init(cmx2xx_io_desc, ARRAY_SIZE(cmx2xx_io_desc));
it8152_base_address = CMX2XX_IT8152_VIRT;
#else
static void __init cmx2xx_map_io(void)
{
- pxa_map_io();
+ if (cpu_is_pxa25x())
+ pxa25x_map_io();
+
+ if (cpu_is_pxa27x())
+ pxa27x_map_io();
}
#endif
MACHINE_START(CM_X300, "CM-X300 module")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
.timer = &pxa_timer,
.init_machine = cm_x300_init,
MACHINE_START(COLIBRI, "Toradex Colibri PXA270")
.boot_params = COLIBRI_SDRAM_BASE + 0x100,
.init_machine = colibri_pxa270_init,
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
MACHINE_END
MACHINE_START(INCOME, "Income s.r.o. SH-Dmaster PXA270 SBC")
.boot_params = 0xa0000100,
.init_machine = colibri_pxa270_income_init,
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
MACHINE_END
MACHINE_START(COLIBRI300, "Toradex Colibri PXA300")
.boot_params = COLIBRI_SDRAM_BASE + 0x100,
.init_machine = colibri_pxa300_init,
- .map_io = pxa_map_io,
+ .map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
.timer = &pxa_timer,
MACHINE_END
MACHINE_START(COLIBRI320, "Toradex Colibri PXA320")
.boot_params = COLIBRI_SDRAM_BASE + 0x100,
.init_machine = colibri_pxa320_init,
- .map_io = pxa_map_io,
+ .map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
.timer = &pxa_timer,
MACHINE_END
#ifdef CONFIG_MACH_CORGI
MACHINE_START(CORGI, "SHARP Corgi")
.fixup = fixup_corgi,
- .map_io = pxa_map_io,
+ .map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
.init_machine = corgi_init,
.timer = &pxa_timer,
#ifdef CONFIG_MACH_SHEPHERD
MACHINE_START(SHEPHERD, "SHARP Shepherd")
.fixup = fixup_corgi,
- .map_io = pxa_map_io,
+ .map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
.init_machine = corgi_init,
.timer = &pxa_timer,
#ifdef CONFIG_MACH_HUSKY
MACHINE_START(HUSKY, "SHARP Husky")
.fixup = fixup_corgi,
- .map_io = pxa_map_io,
+ .map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
.init_machine = corgi_init,
.timer = &pxa_timer,
MACHINE_START(CSB726, "Cogent CSB726")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
.init_machine = csb726_init,
.timer = &pxa_timer,
MACHINE_START(EM_X270, "Compulab EM-X270")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
.init_machine = em_x270_init,
MACHINE_START(EXEDA, "Compulab eXeda")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
.init_machine = em_x270_init,
MACHINE_START(E330, "Toshiba e330")
/* Maintainer: Ian Molton (spyro@f2s.com) */
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa25x_map_io,
.nr_irqs = ESERIES_NR_IRQS,
.init_irq = pxa25x_init_irq,
.fixup = eseries_fixup,
MACHINE_START(E350, "Toshiba e350")
/* Maintainer: Ian Molton (spyro@f2s.com) */
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa25x_map_io,
.nr_irqs = ESERIES_NR_IRQS,
.init_irq = pxa25x_init_irq,
.fixup = eseries_fixup,
MACHINE_START(E400, "Toshiba e400")
/* Maintainer: Ian Molton (spyro@f2s.com) */
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa25x_map_io,
.nr_irqs = ESERIES_NR_IRQS,
.init_irq = pxa25x_init_irq,
.fixup = eseries_fixup,
MACHINE_START(E740, "Toshiba e740")
/* Maintainer: Ian Molton (spyro@f2s.com) */
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa25x_map_io,
.nr_irqs = ESERIES_NR_IRQS,
.init_irq = pxa25x_init_irq,
.fixup = eseries_fixup,
MACHINE_START(E750, "Toshiba e750")
/* Maintainer: Ian Molton (spyro@f2s.com) */
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa25x_map_io,
.nr_irqs = ESERIES_NR_IRQS,
.init_irq = pxa25x_init_irq,
.fixup = eseries_fixup,
MACHINE_START(E800, "Toshiba e800")
/* Maintainer: Ian Molton (spyro@f2s.com) */
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa25x_map_io,
.nr_irqs = ESERIES_NR_IRQS,
.init_irq = pxa25x_init_irq,
.fixup = eseries_fixup,
MACHINE_START(EZX_A780, "Motorola EZX A780")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
MACHINE_START(EZX_E680, "Motorola EZX E680")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
MACHINE_START(EZX_A1200, "Motorola EZX A1200")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
MACHINE_START(EZX_A910, "Motorola EZX A910")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
MACHINE_START(EZX_E6, "Motorola EZX E6")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
MACHINE_START(EZX_E2, "Motorola EZX E2")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
/*
* Intel PXA2xx internal register mapping.
*
- * Note 1: not all PXA2xx variants implement all those addresses.
- *
- * Note 2: virtual 0xfffe0000-0xffffffff is reserved for the vector table
- * and cache flush area.
+ * Note: virtual 0xfffe0000-0xffffffff is reserved for the vector table
+ * and cache flush area.
*/
-static struct map_desc standard_io_desc[] __initdata = {
+static struct map_desc common_io_desc[] __initdata = {
{ /* Devs */
.virtual = 0xf2000000,
.pfn = __phys_to_pfn(0x40000000),
.length = 0x02000000,
.type = MT_DEVICE
- }, { /* Mem Ctl */
- .virtual = 0xf6000000,
- .pfn = __phys_to_pfn(0x48000000),
- .length = 0x00200000,
- .type = MT_DEVICE
- }, { /* IMem ctl */
- .virtual = 0xfe000000,
- .pfn = __phys_to_pfn(0x58000000),
- .length = 0x00100000,
- .type = MT_DEVICE
}, { /* UNCACHED_PHYS_0 */
.virtual = 0xff000000,
.pfn = __phys_to_pfn(0x00000000),
void __init pxa_map_io(void)
{
- iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc));
- get_clk_frequency_khz(1);
+ iotable_init(ARRAY_AND_SIZE(common_io_desc));
}
#endif
extern void __init pxa27x_init_irq(void);
extern void __init pxa3xx_init_irq(void);
+
extern void __init pxa_map_io(void);
+extern void __init pxa25x_map_io(void);
+extern void __init pxa27x_map_io(void);
+extern void __init pxa3xx_map_io(void);
extern unsigned int get_clk_frequency_khz(int info);
MACHINE_START(GUMSTIX, "Gumstix")
.boot_params = 0xa0000100, /* match u-boot bi_boot_params */
- .map_io = pxa_map_io,
+ .map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
.timer = &pxa_timer,
.init_machine = gumstix_init,
MACHINE_START(H5400, "HP iPAQ H5000")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
.timer = &pxa_timer,
.init_machine = h5000_init,
MACHINE_START(HIMALAYA, "HTC Himalaya")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
.init_machine = himalaya_init,
.timer = &pxa_timer,
MACHINE_START(H4700, "HP iPAQ HX4700")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.nr_irqs = HX4700_NR_IRQS,
.init_irq = pxa27x_init_irq,
.init_machine = hx4700_init,
MACHINE_START(ICONTROL, "iControl/SafeTcam boards using Embedian MXM-8x10 CoM")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
.timer = &pxa_timer,
.init_machine = icontrol_init
static void __init idp_map_io(void)
{
- pxa_map_io();
+ pxa25x_map_io();
iotable_init(idp_io_desc, ARRAY_SIZE(idp_io_desc));
}
MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleton)")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa3xx_map_io,
.nr_irqs = LITTLETON_NR_IRQS,
.init_irq = pxa3xx_init_irq,
.timer = &pxa_timer,
static void __init lpd270_map_io(void)
{
- pxa_map_io();
+ pxa27x_map_io();
iotable_init(lpd270_io_desc, ARRAY_SIZE(lpd270_io_desc));
/* for use I SRAM as framebuffer. */
static void __init lubbock_map_io(void)
{
- pxa_map_io();
+ pxa25x_map_io();
iotable_init(lubbock_io_desc, ARRAY_SIZE(lubbock_io_desc));
PCFR |= PCFR_OPDE;
MACHINE_START(MAGICIAN, "HTC Magician")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.nr_irqs = MAGICIAN_NR_IRQS,
.init_irq = pxa27x_init_irq,
.init_machine = magician_init,
static void __init mainstone_map_io(void)
{
- pxa_map_io();
+ pxa27x_map_io();
iotable_init(mainstone_io_desc, ARRAY_SIZE(mainstone_io_desc));
/* for use I SRAM as framebuffer. */
MACHINE_START(MIOA701, "MIO A701")
.boot_params = 0xa0000100,
- .map_io = &pxa_map_io,
+ .map_io = &pxa27x_map_io,
.init_irq = &pxa27x_init_irq,
.init_machine = mioa701_machine_init,
.timer = &pxa_timer,
MACHINE_START(NEC_MP900, "MobilePro900/C")
.boot_params = 0xa0220100,
.timer = &pxa_timer,
- .map_io = pxa_map_io,
+ .map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
.init_machine = mp900c_init,
MACHINE_END
static void __init palmld_map_io(void)
{
- pxa_map_io();
+ pxa27x_map_io();
iotable_init(palmld_io_desc, ARRAY_SIZE(palmld_io_desc));
}
MACHINE_START(PALMT5, "Palm Tungsten|T5")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.reserve = palmt5_reserve,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
MACHINE_START(PALMTC, "Palm Tungsten|C")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
.timer = &pxa_timer,
.init_machine = palmtc_init
MACHINE_START(PALMTE2, "Palm Tungsten|E2")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
.timer = &pxa_timer,
.init_machine = palmte2_init
MACHINE_START(TREO680, "Palm Treo 680")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.reserve = treo_reserve,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
MACHINE_START(CENTRO, "Palm Centro 685")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.reserve = treo_reserve,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
static void __init palmtx_map_io(void)
{
- pxa_map_io();
+ pxa27x_map_io();
iotable_init(palmtx_io_desc, ARRAY_SIZE(palmtx_io_desc));
}
MACHINE_START(PALMZ72, "Palm Zire72")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
.init_machine = palmz72_init
static void __init pcm027_map_io(void)
{
- pxa_map_io();
+ pxa27x_map_io();
/* initialize sleep mode regs (wake-up sources, etc) */
PGSR0 = 0x01308000;
MACHINE_START(POODLE, "SHARP Poodle")
.fixup = fixup_poodle,
- .map_io = pxa_map_io,
+ .map_io = pxa25x_map_io,
.nr_irqs = POODLE_NR_IRQS, /* 4 for LoCoMo */
.init_irq = pxa25x_init_irq,
.timer = &pxa_timer,
#include <linux/suspend.h>
#include <linux/sysdev.h>
+#include <asm/mach/map.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
#include <mach/gpio.h>
}
#endif
+static struct map_desc pxa25x_io_desc[] __initdata = {
+ { /* Mem Ctl */
+ .virtual = 0xf6000000,
+ .pfn = __phys_to_pfn(0x48000000),
+ .length = 0x00200000,
+ .type = MT_DEVICE
+ },
+};
+
+void __init pxa25x_map_io(void)
+{
+ pxa_map_io();
+ iotable_init(ARRAY_AND_SIZE(pxa25x_io_desc));
+ pxa25x_get_clk_frequency_khz(1);
+}
+
static struct platform_device *pxa25x_devices[] __initdata = {
&pxa25x_device_udc,
&pxa_device_pmu,
#include <linux/platform_device.h>
#include <linux/sysdev.h>
+#include <asm/mach/map.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <mach/irqs.h>
pxa_init_gpio(IRQ_GPIO_2_x, 2, 120, pxa27x_set_wake);
}
+static struct map_desc pxa27x_io_desc[] __initdata = {
+ { /* Mem Ctl */
+ .virtual = 0xf6000000,
+ .pfn = __phys_to_pfn(0x48000000),
+ .length = 0x00200000,
+ .type = MT_DEVICE
+ }, { /* IMem ctl */
+ .virtual = 0xfe000000,
+ .pfn = __phys_to_pfn(0x58000000),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ },
+};
+
+void __init pxa27x_map_io(void)
+{
+ pxa_map_io();
+ iotable_init(ARRAY_AND_SIZE(pxa27x_io_desc));
+ pxa27x_get_clk_frequency_khz(1);
+}
+
/*
* device registration specific to PXA27x.
*/
#include <linux/io.h>
#include <linux/sysdev.h>
+#include <asm/mach/map.h>
#include <mach/hardware.h>
#include <mach/gpio.h>
#include <mach/pxa3xx-regs.h>
pxa_init_gpio(IRQ_GPIO_2_x, 2, 127, NULL);
}
+static struct map_desc pxa3xx_io_desc[] __initdata = {
+ { /* Mem Ctl */
+ .virtual = 0xf6000000,
+ .pfn = __phys_to_pfn(0x4a000000),
+ .length = 0x00200000,
+ .type = MT_DEVICE
+ }
+};
+
+void __init pxa3xx_map_io(void)
+{
+ pxa_map_io();
+ iotable_init(ARRAY_AND_SIZE(pxa3xx_io_desc));
+ pxa3xx_get_clk_frequency_khz(1);
+}
+
/*
* device registration specific to PXA3xx.
*/
MACHINE_START(RAUMFELD_RC, "Raumfeld Controller")
.boot_params = RAUMFELD_SDRAM_BASE + 0x100,
.init_machine = raumfeld_controller_init,
- .map_io = pxa_map_io,
+ .map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
.timer = &pxa_timer,
MACHINE_END
MACHINE_START(RAUMFELD_CONNECTOR, "Raumfeld Connector")
.boot_params = RAUMFELD_SDRAM_BASE + 0x100,
.init_machine = raumfeld_connector_init,
- .map_io = pxa_map_io,
+ .map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
.timer = &pxa_timer,
MACHINE_END
MACHINE_START(RAUMFELD_SPEAKER, "Raumfeld Speaker")
.boot_params = RAUMFELD_SDRAM_BASE + 0x100,
.init_machine = raumfeld_speaker_init,
- .map_io = pxa_map_io,
+ .map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
.timer = &pxa_timer,
MACHINE_END
MACHINE_START(SAAR, "PXA930 Handheld Platform (aka SAAR)")
/* Maintainer: Eric Miao <eric.miao@marvell.com> */
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
.timer = &pxa_timer,
.init_machine = saar_init,
#include <linux/mtd/sharpsl.h>
#include <linux/input/matrix_keypad.h>
#include <linux/regulator/machine.h>
+#include <linux/io.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#ifdef CONFIG_MACH_SPITZ
MACHINE_START(SPITZ, "SHARP Spitz")
.fixup = spitz_fixup,
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
.init_machine = spitz_init,
.timer = &pxa_timer,
#ifdef CONFIG_MACH_BORZOI
MACHINE_START(BORZOI, "SHARP Borzoi")
.fixup = spitz_fixup,
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
.init_machine = spitz_init,
.timer = &pxa_timer,
#ifdef CONFIG_MACH_AKITA
MACHINE_START(AKITA, "SHARP Akita")
.fixup = spitz_fixup,
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
.init_machine = spitz_init,
.timer = &pxa_timer,
#ifdef CONFIG_MACH_INTELMOTE2
MACHINE_START(INTELMOTE2, "IMOTE 2")
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
.init_machine = imote2_init,
#ifdef CONFIG_MACH_STARGATE2
MACHINE_START(STARGATE2, "Stargate 2")
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.nr_irqs = STARGATE_NR_IRQS,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
MACHINE_START(TAVOREVB, "PXA930 Evaluation Board (aka TavorEVB)")
/* Maintainer: Eric Miao <eric.miao@marvell.com> */
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
.timer = &pxa_timer,
.init_machine = tavorevb_init,
MACHINE_START(TAVOREVB3, "PXA950 Evaluation Board (aka TavorEVB3)")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa3xx_map_io,
.nr_irqs = TAVOREVB3_NR_IRQS,
.init_irq = pxa3xx_init_irq,
.timer = &pxa_timer,
MACHINE_START(TOSA, "SHARP Tosa")
.fixup = fixup_tosa,
- .map_io = pxa_map_io,
+ .map_io = pxa25x_map_io,
.nr_irqs = TOSA_NR_IRQS,
.init_irq = pxa25x_init_irq,
.init_machine = tosa_init,
static void __init trizeps4_map_io(void)
{
- pxa_map_io();
+ pxa27x_map_io();
iotable_init(trizeps4_io_desc, ARRAY_SIZE(trizeps4_io_desc));
if ((MSC0 & 0x8) && (BOOT_DEF & 0x1)) {
static void __init viper_map_io(void)
{
- pxa_map_io();
+ pxa25x_map_io();
iotable_init(viper_io_desc, ARRAY_SIZE(viper_io_desc));
MACHINE_START(VPAC270, "Voipac PXA270")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
.init_machine = vpac270_init
MACHINE_START(XCEP, "Iskratel XCEP")
.boot_params = 0xa0000100,
.init_machine = xcep_init,
- .map_io = pxa_map_io,
+ .map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
.timer = &pxa_timer,
MACHINE_END
MACHINE_START(ZIPIT2, "Zipit Z2")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
.init_machine = z2_init,
static void __init zeus_map_io(void)
{
- pxa_map_io();
+ pxa27x_map_io();
iotable_init(zeus_io_desc, ARRAY_SIZE(zeus_io_desc));
MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa3xx_map_io,
.nr_irqs = ZYLONITE_NR_IRQS,
.init_irq = pxa3xx_init_irq,
.timer = &pxa_timer,