* Set during transport allocation.
* @hw_id_str: a string with info about HW ID. Set during transport allocation.
* @pm_support: set to true in start_hw if link pm is supported
+ * @ltr_enabled: set to true if the LTR is enabled
* @dev_cmd_pool: pool for Tx cmd allocation - for internal use only.
* The user should use iwl_trans_{alloc,free}_tx_cmd.
* @dev_cmd_headroom: room needed for the transport's private use before the
u8 rx_mpdu_cmd, rx_mpdu_cmd_hdr_size;
bool pm_support;
+ bool ltr_enabled;
/* The following fields are internal only */
struct kmem_cache *dev_cmd_pool;
/* Power Management Commands, Responses, Notifications */
+/**
+ * enum iwl_ltr_config_flags - masks for LTR config command flags
+ * @LTR_CFG_FLAG_FEATURE_ENABLE: Feature operational status
+ * @LTR_CFG_FLAG_HW_DIS_ON_SHADOW_REG_ACCESS: allow LTR change on shadow
+ * memory access
+ * @LTR_CFG_FLAG_HW_EN_SHRT_WR_THROUGH: allow LTR msg send on ANY LTR
+ * reg change
+ * @LTR_CFG_FLAG_HW_DIS_ON_D0_2_D3: allow LTR msg send on transition from
+ * D0 to D3
+ * @LTR_CFG_FLAG_SW_SET_SHORT: fixed static short LTR register
+ * @LTR_CFG_FLAG_SW_SET_LONG: fixed static short LONG register
+ * @LTR_CFG_FLAG_DENIE_C10_ON_PD: allow going into C10 on PD
+ */
+enum iwl_ltr_config_flags {
+ LTR_CFG_FLAG_FEATURE_ENABLE = BIT(0),
+ LTR_CFG_FLAG_HW_DIS_ON_SHADOW_REG_ACCESS = BIT(1),
+ LTR_CFG_FLAG_HW_EN_SHRT_WR_THROUGH = BIT(2),
+ LTR_CFG_FLAG_HW_DIS_ON_D0_2_D3 = BIT(3),
+ LTR_CFG_FLAG_SW_SET_SHORT = BIT(4),
+ LTR_CFG_FLAG_SW_SET_LONG = BIT(5),
+ LTR_CFG_FLAG_DENIE_C10_ON_PD = BIT(6),
+};
+
+/**
+ * struct iwl_ltr_config_cmd - configures the LTR
+ * @flags: See %enum iwl_ltr_config_flags
+ */
+struct iwl_ltr_config_cmd {
+ __le32 flags;
+ __le32 static_long;
+ __le32 static_short;
+} __packed;
+
/* Radio LP RX Energy Threshold measured in dBm */
#define POWER_LPRX_RSSI_THRESHOLD 75
#define POWER_LPRX_RSSI_THRESHOLD_MAX 94
#define POWER_LPRX_RSSI_THRESHOLD_MIN 30
/**
- * enum iwl_scan_flags - masks for power table command flags
+ * enum iwl_power_flags - masks for power table command flags
* @POWER_FLAGS_POWER_SAVE_ENA_MSK: '1' Allow to save power by turning off
* receiver and transmitter. '0' - does not allow.
* @POWER_FLAGS_POWER_MANAGEMENT_ENA_MSK: '0' Driver disables power management,
/* Power - legacy power table command */
POWER_TABLE_CMD = 0x77,
PSM_UAPSD_AP_MISBEHAVING_NOTIFICATION = 0x78,
+ LTR_CONFIG = 0xee,
/* Thermal Throttling*/
REPLY_THERMAL_MNG_BACKOFF = 0x7e,
goto error;
}
+ if (mvm->trans->ltr_enabled) {
+ struct iwl_ltr_config_cmd cmd = {
+ .flags = cpu_to_le32(LTR_CFG_FLAG_FEATURE_ENABLE),
+ };
+
+ WARN_ON(iwl_mvm_send_cmd_pdu(mvm, LTR_CONFIG, 0,
+ sizeof(cmd), &cmd));
+ }
+
ret = iwl_mvm_power_update_device_mode(mvm);
if (ret)
goto error;
CMD(REPLY_BEACON_FILTERING_CMD),
CMD(REPLY_THERMAL_MNG_BACKOFF),
CMD(MAC_PM_POWER_TABLE),
+ CMD(LTR_CONFIG),
CMD(BT_COEX_CI),
CMD(PSM_UAPSD_AP_MISBEHAVING_NOTIFICATION),
};
{
struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
u16 lctl;
+ u16 cap;
/*
* HW bug W/A for instability in PCIe bus L0S->L1 transition.
* power savings, even without L1.
*/
pcie_capability_read_word(trans_pcie->pci_dev, PCI_EXP_LNKCTL, &lctl);
- if (lctl & PCI_EXP_LNKCTL_ASPM_L1) {
- /* L1-ASPM enabled; disable(!) L0S */
+ if (lctl & PCI_EXP_LNKCTL_ASPM_L1)
iwl_set_bit(trans, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED);
- dev_info(trans->dev, "L1 Enabled; Disabling L0S\n");
- } else {
- /* L1-ASPM disabled; enable(!) L0S */
+ else
iwl_clear_bit(trans, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED);
- dev_info(trans->dev, "L1 Disabled; Enabling L0S\n");
- }
trans->pm_support = !(lctl & PCI_EXP_LNKCTL_ASPM_L0S);
+
+ pcie_capability_read_word(trans_pcie->pci_dev, PCI_EXP_DEVCTL2, &cap);
+ trans->ltr_enabled = cap & PCI_EXP_DEVCTL2_LTR_EN;
+ dev_info(trans->dev, "L1 %sabled - LTR %sabled\n",
+ (lctl & PCI_EXP_LNKCTL_ASPM_L1) ? "En" : "Dis",
+ trans->ltr_enabled ? "En" : "Dis");
}
/*