ALSA: hda: Correct EAPD for Dell Inspiron 1525

The commit 24918b61b55c21e09a3e07cd82e1b3a8154782dc statically changes
the model from dell-bios to dell-3stack to solve the sound decreasing
regression (http://lkml.org/lkml/2008/9/12/203), however it leads to another
problem that the 2nd headphone jack doesn't work
(https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3987). So I think
the commit 249**2dc is just a workaround. I would like to give a true solution
here.

The datasheet for STAC9228 says, GPIO2 is the same pin as VOL DOWN, and
the EAPD pin is GPIO0. This is why the sound decreases if we set EAPD as
GPIO2. This patch changes EAPD to GPIO0 to solve the problem.

Signed-off-by: Chengu Wang <wangchengu@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 5383d8c..456ef6a 100644 (file)
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -2266,7 +2266,7 @@ static struct snd_pci_quirk stac927x_cfg_tbl[] = {
        SND_PCI_QUIRK(PCI_VENDOR_ID_DELL,  0x01f3, "Dell Inspiron 1420", STAC_DELL_BIOS),
        SND_PCI_QUIRK(PCI_VENDOR_ID_DELL,  0x0227, "Dell Vostro 1400  ", STAC_DELL_BIOS),
        SND_PCI_QUIRK(PCI_VENDOR_ID_DELL,  0x022e, "Dell     ", STAC_DELL_BIOS),
-       SND_PCI_QUIRK(PCI_VENDOR_ID_DELL,  0x022f, "Dell Inspiron 1525", STAC_DELL_3ST),
+       SND_PCI_QUIRK(PCI_VENDOR_ID_DELL,  0x022f, "Dell Inspiron 1525", STAC_DELL_BIOS),
        SND_PCI_QUIRK(PCI_VENDOR_ID_DELL,  0x0242, "Dell     ", STAC_DELL_BIOS),
        SND_PCI_QUIRK(PCI_VENDOR_ID_DELL,  0x0243, "Dell     ", STAC_DELL_BIOS),
        SND_PCI_QUIRK(PCI_VENDOR_ID_DELL,  0x02ff, "Dell     ", STAC_DELL_BIOS),
@@ -5645,6 +5645,13 @@ static int patch_stac927x(struct hda_codec *codec)
                /* GPIO2 High = Enable EAPD */
                spec->eapd_mask = spec->gpio_mask = spec->gpio_dir = 0x04;
                spec->gpio_data = 0x04;
+               switch (codec->subsystem_id) {
+               case 0x1028022f:
+                       /* correct EAPD to be GPIO0 */
+                       spec->eapd_mask = spec->gpio_mask = 0x01;
+                       spec->gpio_dir = spec->gpio_data = 0x01;
+                       break;
+               };
                spec->dmic_nids = stac927x_dmic_nids;
                spec->num_dmics = STAC927X_NUM_DMICS;