tizen: enable support for formatting MBR partition layout during flashing

This is ensured by the following steps:
1. enable 'mbr' command and provide default partiton layout,
2. add support for formating block device from THOR downloaded script,
3. check MBR partition layout on boot and enter THOR mode if invalid
4. provide a script for formating MBR for THOR download

MBR partition layout is checked on boot if it mathes the one defined
during u-boot compilation. If not, set dfu_alt_info to the minimal safe
list and enter THOR download mode to flash the new, proper partition
layout and the complete Tizen image.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: I490e5b3314513012259f3981feae047f95649c3b

diff --git a/configs/khadas-vim3_defconfig b/configs/khadas-vim3_defconfig
index 3a4cb692d4cae542913f830bb1d8d53e0a57f156..1d6f0ca7fda979312f96f82a42ad6f496a673a34 100644 (file)
--- a/configs/khadas-vim3_defconfig
+++ b/configs/khadas-vim3_defconfig
@@ -13,6 +13,8 @@ CONFIG_IDENT_STRING=" khadas-vim3"
 CONFIG_DEFAULT_DEVICE_TREE="meson-g12b-a311d-khadas-vim3"
 CONFIG_DEBUG_UART=y
 CONFIG_OF_BOARD_SETUP=y
+CONFIG_USE_PREBOOT=y
+CONFIG_PREBOOT="run mbr_check"
 # CONFIG_CONSOLE_MUX is not set
 CONFIG_MISC_INIT_R=y
 # CONFIG_DISPLAY_CPUINFO is not set
@@ -23,6 +25,7 @@ CONFIG_CMD_THOR_DOWNLOAD=y
 CONFIG_CMD_DFU=y
 CONFIG_CMD_GPIO=y
 # CONFIG_CMD_LOADS is not set
+CONFIG_CMD_MBR=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SF_TEST=y
 CONFIG_CMD_SPI=y

diff --git a/configs/khadas-vim3l_defconfig b/configs/khadas-vim3l_defconfig
index d0fccce32d35d45145afe7c09a7b1adee5df97c4..a4570de40468ff92454feec9709d7a5def500773 100644 (file)
--- a/configs/khadas-vim3l_defconfig
+++ b/configs/khadas-vim3l_defconfig
@@ -13,6 +13,8 @@ CONFIG_IDENT_STRING=" khadas-vim3l"
 CONFIG_DEFAULT_DEVICE_TREE="meson-sm1-khadas-vim3l"
 CONFIG_DEBUG_UART=y
 CONFIG_OF_BOARD_SETUP=y
+CONFIG_USE_PREBOOT=y
+CONFIG_PREBOOT="run mbr_check"
 CONFIG_MISC_INIT_R=y
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_SYS_PROMPT="Khadas VIM3L>"
@@ -22,6 +24,7 @@ CONFIG_CMD_THOR_DOWNLOAD=y
 CONFIG_CMD_DFU=y
 CONFIG_CMD_GPIO=y
 # CONFIG_CMD_LOADS is not set
+CONFIG_CMD_MBR=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SF_TEST=y
 CONFIG_CMD_SPI=y

diff --git a/configs/odroid-c4_defconfig b/configs/odroid-c4_defconfig
index 0df6d33c4fbd483037bf345271b5ebcffde0b90d..605d33f530e7c7c06e431f768a4145f6e39decd3 100644 (file)
--- a/configs/odroid-c4_defconfig
+++ b/configs/odroid-c4_defconfig
@@ -15,6 +15,8 @@ CONFIG_IDENT_STRING=" odroid-c4"
 CONFIG_DEFAULT_DEVICE_TREE="meson-sm1-odroid-c4"
 CONFIG_DEBUG_UART=y
 CONFIG_OF_BOARD_SETUP=y
+CONFIG_USE_PREBOOT=y
+CONFIG_PREBOOT="run mbr_check"
 CONFIG_MISC_INIT_R=y
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_SYS_PROMPT="Odroid C4>"
@@ -24,6 +26,7 @@ CONFIG_CMD_THOR_DOWNLOAD=y
 CONFIG_CMD_DFU=y
 CONFIG_CMD_GPIO=y
 # CONFIG_CMD_LOADS is not set
+CONFIG_CMD_MBR=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_USB_MASS_STORAGE=y

diff --git a/configs/odroid-n2_defconfig b/configs/odroid-n2_defconfig
index 850adfc4c45c7751da266444b53c64c7f0261d87..805775e3a544df672efebacf9dfbd0b579fd4da7 100644 (file)
--- a/configs/odroid-n2_defconfig
+++ b/configs/odroid-n2_defconfig
@@ -13,6 +13,8 @@ CONFIG_IDENT_STRING=" odroid-n2"
 CONFIG_DEFAULT_DEVICE_TREE="meson-g12b-odroid-n2"
 CONFIG_DEBUG_UART=y
 CONFIG_OF_BOARD_SETUP=y
+CONFIG_USE_PREBOOT=y
+CONFIG_PREBOOT="run mbr_check"
 # CONFIG_CONSOLE_MUX is not set
 CONFIG_MISC_INIT_R=y
 # CONFIG_DISPLAY_CPUINFO is not set
@@ -23,6 +25,7 @@ CONFIG_CMD_THOR_DOWNLOAD=y
 CONFIG_CMD_DFU=y
 CONFIG_CMD_GPIO=y
 # CONFIG_CMD_LOADS is not set
+CONFIG_CMD_MBR=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_USB_MASS_STORAGE=y

diff --git a/include/samsung/tizen_amlogic.h b/include/samsung/tizen_amlogic.h
index 0aafba8057fa2dabeef614e39b463a1d366a6c6d..ea192bddc8aede8120157a9a8a402655327ebb8e 100644 (file)
--- a/include/samsung/tizen_amlogic.h
+++ b/include/samsung/tizen_amlogic.h
@@ -40,24 +40,48 @@
        "ramdisk.img part -1 7;"                \
        "ramdisk-recovery.img part -1 8"
 
+/*
+ * '0-format.cmd' entity is common for all boards, but it has to be
+ * defined in the per-board DFU_ALT_BOOT_* to ensure that it is also
+ * available in the dfu_alt_fallback env
+ */
 #define DFU_ALT_BOOT_ODROID_N2 "u-boot-n2.bin raw 0x1 0x1000;" \
                                "u-boot-c4.bin skip 0 0;"       \
                                "u-boot-vim3l.bin skip 0 0;"    \
-                               "u-boot-vim3.bin skip 0 0"
+                               "u-boot-vim3.bin skip 0 0;"     \
+                               "0-format.cmd script 0 0"
 #define DFU_ALT_BOOT_VIM3      "u-boot-vim3.bin raw 0x1 0x1000;" \
                                "u-boot-c4.bin skip 0 0;"       \
                                "u-boot-vim3l.bin skip 0 0;"    \
-                               "u-boot-n2.bin skip 0 0"
+                               "u-boot-n2.bin skip 0 0;"       \
+                               "0-format.cmd script 0 0"
 #define DFU_ALT_BOOT_ODROID_C4 "u-boot-c4.bin raw 0x1 0x1000;" \
                                "u-boot-vim3.bin skip 0 0;"     \
                                "u-boot-vim3l.bin skip 0 0;"    \
-                               "u-boot-n2.bin skip 0 0"
+                               "u-boot-n2.bin skip 0 0;"       \
+                               "0-format.cmd script 0 0"
 #define DFU_ALT_BOOT_VIM3L     "u-boot-vim3l.bin raw 0x1 0x1000;" \
                                "u-boot-vim3.bin skip 0 0;"     \
                                "u-boot-c4.bin skip 0 0;"       \
-                               "u-boot-n2.bin skip 0 0"
+                               "u-boot-n2.bin skip 0 0;"       \
+                               "0-format.cmd script 0 0"
+
 #define CONFIG_SET_DFU_ALT_BUF_LEN     (SZ_1K)
 
+#define PARTS_DEFAULT \
+       "name=boot,start=4M,size=128M,bootable,id=0x0e;"        \
+       "name=rootfs,size=3072M,id=0x83;"                       \
+       "name=system-data,size=512M,id=0x83;"                   \
+       "name=[ext],size=-,id=0x05;"                            \
+       "name=user,size=-,id=0x83;"                             \
+       "name=modules,size=100M,id=0x83;"                       \
+       "name=ramdisk,size=8M,id=0x83;"                         \
+       "name=ramdisk-recovery,size=32M,id=0x83;"               \
+       "name=reserved0,size=8M,id=0x83;"                       \
+       "name=reserved1,size=64M,id=0x83;"                      \
+       "name=reserved2,size=128M,id=0x83;"                     \
+       ""
+
 /* DFU over USB/UDC */
 #if defined(CONFIG_CMD_DFU) || defined(CONFIG_CMD_THOR)
 #define CONFIG_SYS_DFU_DATA_BUF_SIZE   SZ_1M
@@ -92,6 +116,17 @@
 #define DEVICE_TREE_NAME       CONFIG_DEFAULT_DEVICE_TREE
 #endif
 
+#define MBR_CHECK      \
+       "env default mbr_parts; "                                       \
+       "if mbr verify ${dfu_interface} ${dfu_device}; "                \
+       "then true; else "                                              \
+       "echo \"MBR layout does not match flashed bootloader!\"; "      \
+       "echo \"Please flash complete Tizen image or Ctrl-C to continue.\"; " \
+       "env default dfu_alt_fallback; "                                \
+       "setenv dfu_alt_info \"${dfu_alt_fallback}\"; "                 \
+       "thor; "                                                        \
+       "fi"
+
 #define TIZEN_ENV_SETTING \
        "mmcbootpart=1\0"                       \
        "mmcrootpart=2\0"                       \
@@ -100,6 +135,7 @@
        "bootmode=ramdisk\0"                    \
        "bootdev=mmc\0"                         \
        "dfu_alt_info=" DFU_ALT_SYSTEM ";" DFU_ALT_BOOT "\0"\
+       "dfu_alt_fallback=" DFU_ALT_BOOT "\0"   \
        "fdt_high=0x20000000\0"                 \
        "initrd_high=0x3d800000\0"              \
        "opts=loglevel=4\0"                     \
@@ -107,7 +143,10 @@
        "dfu_interface=mmc\0"                   \
        "fdtfile=" DEVICE_TREE_NAME "\0"        \
        "board_name=" BOARD_NAME "\0"           \
-       "boot_prefixes=" TIZEN_BOOT_PREFIX "\0"
+       "boot_prefixes=" TIZEN_BOOT_PREFIX "\0" \
+       "mbr_parts=" PARTS_DEFAULT "\0"         \
+       "mbr_check=" MBR_CHECK "\0"
+
 
 #define CONFIG_TIZEN
 

diff --git a/tizen/build-amlogic.sh b/tizen/build-amlogic.sh
index 5133e7e50fb11960cb905ce2c6e3f6dc35dd37e2..bee573100621d6c990c932bd72396ce94d0a95ff 100755 (executable)
--- a/tizen/build-amlogic.sh
+++ b/tizen/build-amlogic.sh
@@ -15,6 +15,7 @@ set_names()
        PARAMS=params-c4.bin
        OUTPUT_BIN=u-boot-c4.bin
        OUTPUT_TAR=odroidc4_bootloader.tar
+       OUTPUT2_TGZ=odroidc4_format_bootloader.tar.gz
        ;;
 
        n2)
@@ -25,6 +26,7 @@ set_names()
        PARAMS=params-n2.bin
        OUTPUT_BIN=u-boot-n2.bin
        OUTPUT_TAR=odroidn2_bootloader.tar
+       OUTPUT2_TGZ=odroidn2_format_bootloader.tar.gz
        ;;
 
        vim3)
@@ -35,6 +37,7 @@ set_names()
        PARAMS=params-vim3.bin
        OUTPUT_BIN=u-boot-vim3.bin
        OUTPUT_TAR=kvim3_bootloader.tar
+       OUTPUT2_TGZ=kvim3_format_bootloader.tar.gz
        ;;
 
        vim3l)
@@ -45,10 +48,12 @@ set_names()
        PARAMS=params-vim3l.bin
        OUTPUT_BIN=u-boot-vim3l.bin
        OUTPUT_TAR=kvim3l_bootloader.tar
+       OUTPUT2_TGZ=kvim3l_format_bootloader.tar.gz
        ;;
 
        all)
        OUTPUT_TAR=amlogic_bootloader.tar
+       OUTPUT2_TGZ=amlogic_format_bootloader.tar.gz
        ;;
 esac
 }
@@ -120,6 +125,32 @@ build_amlogic()
        cd ..
 }
 
+build_format()
+{
+       cd output
+
+       rm -f 0-format.cmd
+       for i in params*.bin
+       do
+               strings $i | grep 'board_name=' | sed -e 's/\([a-z_]*\)=\(.*\)/if test \$\{\1\} = "\2"; then/' >>0-format.cmd
+               strings $i | grep 'dfu_alt_info=' | sed -e 's/\([a-z_]*\)=\(.*\)/setenv \1 "\2";/' >>0-format.cmd
+               strings $i | grep 'mbr_parts=' | sed -e 's/\([a-z_]*\)=\(.*\)/setenv \1 "\2";/' >>0-format.cmd
+               echo 'mbr write ${dfu_interface} ${dfu_device} "${mbr_parts}";' >>0-format.cmd
+               echo 'fi;' >>0-format.cmd
+       done
+
+       # make empty FAT partiton
+       dd if=/dev/zero of=boot.img bs=1024 count=128k
+       mkfs.vfat -n BOOT boot.img
+       mmd -i boot.img odroid
+       mmd -i boot.img kvim
+       # WARNING: the order of files in the TAR is important!!!
+       # 0-format.cmd MUST be before any other MBR related entity
+       # boot.img must be before any file from FAT partiton
+       tar cvfz ${OUTPUT2_TGZ} u-boot-+([a-z0-9]).bin 0-format.cmd boot.img boot.scr.uimg params*.bin
+       cd ..
+}
+
 case $1 in
 c4|n2|vim3|vim3l)
        BOARDS=$1
@@ -155,3 +186,4 @@ then
        tar cvf ${OUTPUT_TAR} u-boot-+([a-z0-9]).bin boot.scr.uimg params*.bin
        cd ..
 fi
+build_format