// SPDX-License-Identifier: GPL-2.0+
/* Copyright (c) 2014-2018 Daktronics,
- Matt Sickler <matt.sickler@daktronics.com>,
- Jordon Hofer <jordon.hofer@daktronics.com>
+ Matt Sickler <matt.sickler@daktronics.com>,
+ Jordon Hofer <jordon.hofer@daktronics.com>
Adapted i2c-i801.c for use with Kadoka hardware.
Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl>,
Philip Edelbrock <phil@netroedge.com>, and Mark D. Studebaker
<mdsxyz123@yahoo.com>
Copyright (C) 2007 - 2012 Jean Delvare <khali@linux-fr.org>
Copyright (C) 2010 Intel Corporation,
- David Woodhouse <dwmw2@infradead.org>
+ David Woodhouse <dwmw2@infradead.org>
*/
#include <linux/init.h>
#include <linux/module.h>
MODULE_SOFTDEP("pre: i2c-dev");
struct i2c_device {
- unsigned long smba;
- struct i2c_adapter adapter;
- struct platform_device *pldev;
- struct rw_semaphore rw_sem;
- unsigned int features;
+ unsigned long smba;
+ struct i2c_adapter adapter;
+ struct platform_device *pldev;
+ struct rw_semaphore rw_sem;
+ unsigned int features;
};
/*****************************
Return 0 if it is, -EBUSY if it is not. */
static int i801_check_pre(struct i2c_device *priv)
{
- int status;
-
- dev_dbg(&priv->adapter.dev, "i801_check_pre\n");
-
- status = inb_p(SMBHSTSTS(priv));
- if (status & SMBHSTSTS_HOST_BUSY) {
- dev_err(&priv->adapter.dev, "SMBus is busy, can't use it! (status=%x)\n", status);
- return -EBUSY;
- }
-
- status &= STATUS_FLAGS;
- if (status) {
- //dev_dbg(&priv->adapter.dev, "Clearing status flags (%02x)\n", status);
- outb_p(status, SMBHSTSTS(priv));
- status = inb_p(SMBHSTSTS(priv)) & STATUS_FLAGS;
- if (status) {
- dev_err(&priv->adapter.dev, "Failed clearing status flags (%02x)\n", status);
- return -EBUSY;
- }
- }
- return 0;
+ int status;
+
+ dev_dbg(&priv->adapter.dev, "i801_check_pre\n");
+
+ status = inb_p(SMBHSTSTS(priv));
+ if (status & SMBHSTSTS_HOST_BUSY) {
+ dev_err(&priv->adapter.dev, "SMBus is busy, can't use it! (status=%x)\n", status);
+ return -EBUSY;
+ }
+
+ status &= STATUS_FLAGS;
+ if (status) {
+ //dev_dbg(&priv->adapter.dev, "Clearing status flags (%02x)\n", status);
+ outb_p(status, SMBHSTSTS(priv));
+ status = inb_p(SMBHSTSTS(priv)) & STATUS_FLAGS;
+ if (status) {
+ dev_err(&priv->adapter.dev, "Failed clearing status flags (%02x)\n", status);
+ return -EBUSY;
+ }
+ }
+ return 0;
}
/* Convert the status register to an error code, and clear it. */
static int i801_check_post(struct i2c_device *priv, int status, int timeout)
{
- int result = 0;
-
- dev_dbg(&priv->adapter.dev, "i801_check_post\n");
-
- /* If the SMBus is still busy, we give up */
- if (timeout) {
- dev_err(&priv->adapter.dev, "Transaction timeout\n");
- /* try to stop the current command */
- dev_dbg(&priv->adapter.dev, "Terminating the current operation\n");
- outb_p(inb_p(SMBHSTCNT(priv)) | SMBHSTCNT_KILL, SMBHSTCNT(priv));
- usleep_range(1000, 2000);
- outb_p(inb_p(SMBHSTCNT(priv)) & (~SMBHSTCNT_KILL), SMBHSTCNT(priv));
-
- /* Check if it worked */
- status = inb_p(SMBHSTSTS(priv));
- if ((status & SMBHSTSTS_HOST_BUSY) || !(status & SMBHSTSTS_FAILED)) {
- dev_err(&priv->adapter.dev, "Failed terminating the transaction\n");
- }
- outb_p(STATUS_FLAGS, SMBHSTSTS(priv));
- return -ETIMEDOUT;
- }
-
- if (status & SMBHSTSTS_FAILED) {
- result = -EIO;
- dev_err(&priv->adapter.dev, "Transaction failed\n");
- }
- if (status & SMBHSTSTS_DEV_ERR) {
- result = -ENXIO;
- dev_dbg(&priv->adapter.dev, "No response\n");
- }
- if (status & SMBHSTSTS_BUS_ERR) {
- result = -EAGAIN;
- dev_dbg(&priv->adapter.dev, "Lost arbitration\n");
- }
-
- if (result) {
- /* Clear error flags */
- outb_p(status & STATUS_FLAGS, SMBHSTSTS(priv));
- status = inb_p(SMBHSTSTS(priv)) & STATUS_FLAGS;
- if (status) {
- dev_warn(&priv->adapter.dev, "Failed clearing status flags at end of transaction (%02x)\n", status);
- }
- }
-
- return result;
+ int result = 0;
+
+ dev_dbg(&priv->adapter.dev, "i801_check_post\n");
+
+ /* If the SMBus is still busy, we give up */
+ if (timeout) {
+ dev_err(&priv->adapter.dev, "Transaction timeout\n");
+ /* try to stop the current command */
+ dev_dbg(&priv->adapter.dev, "Terminating the current operation\n");
+ outb_p(inb_p(SMBHSTCNT(priv)) | SMBHSTCNT_KILL, SMBHSTCNT(priv));
+ usleep_range(1000, 2000);
+ outb_p(inb_p(SMBHSTCNT(priv)) & (~SMBHSTCNT_KILL), SMBHSTCNT(priv));
+
+ /* Check if it worked */
+ status = inb_p(SMBHSTSTS(priv));
+ if ((status & SMBHSTSTS_HOST_BUSY) || !(status & SMBHSTSTS_FAILED)) {
+ dev_err(&priv->adapter.dev, "Failed terminating the transaction\n");
+ }
+ outb_p(STATUS_FLAGS, SMBHSTSTS(priv));
+ return -ETIMEDOUT;
+ }
+
+ if (status & SMBHSTSTS_FAILED) {
+ result = -EIO;
+ dev_err(&priv->adapter.dev, "Transaction failed\n");
+ }
+ if (status & SMBHSTSTS_DEV_ERR) {
+ result = -ENXIO;
+ dev_dbg(&priv->adapter.dev, "No response\n");
+ }
+ if (status & SMBHSTSTS_BUS_ERR) {
+ result = -EAGAIN;
+ dev_dbg(&priv->adapter.dev, "Lost arbitration\n");
+ }
+
+ if (result) {
+ /* Clear error flags */
+ outb_p(status & STATUS_FLAGS, SMBHSTSTS(priv));
+ status = inb_p(SMBHSTSTS(priv)) & STATUS_FLAGS;
+ if (status) {
+ dev_warn(&priv->adapter.dev, "Failed clearing status flags at end of transaction (%02x)\n", status);
+ }
+ }
+
+ return result;
}
static int i801_transaction(struct i2c_device *priv, int xact)
{
- int status;
- int result;
- int timeout = 0;
-
- dev_dbg(&priv->adapter.dev, "i801_transaction\n");
-
- result = i801_check_pre(priv);
- if (result < 0) {
- return result;
- }
- /* the current contents of SMBHSTCNT can be overwritten, since PEC,
- * INTREN, SMBSCMD are passed in xact */
- outb_p(xact | I801_START, SMBHSTCNT(priv));
-
- /* We will always wait for a fraction of a second! */
- do {
- usleep_range(250, 500);
- status = inb_p(SMBHSTSTS(priv));
- } while ((status & SMBHSTSTS_HOST_BUSY) && (timeout++ < MAX_RETRIES));
-
- result = i801_check_post(priv, status, timeout > MAX_RETRIES);
- if (result < 0) {
- return result;
- }
-
- outb_p(SMBHSTSTS_INTR, SMBHSTSTS(priv));
- return 0;
+ int status;
+ int result;
+ int timeout = 0;
+
+ dev_dbg(&priv->adapter.dev, "i801_transaction\n");
+
+ result = i801_check_pre(priv);
+ if (result < 0) {
+ return result;
+ }
+ /* the current contents of SMBHSTCNT can be overwritten, since PEC,
+ * INTREN, SMBSCMD are passed in xact */
+ outb_p(xact | I801_START, SMBHSTCNT(priv));
+
+ /* We will always wait for a fraction of a second! */
+ do {
+ usleep_range(250, 500);
+ status = inb_p(SMBHSTSTS(priv));
+ } while ((status & SMBHSTSTS_HOST_BUSY) && (timeout++ < MAX_RETRIES));
+
+ result = i801_check_post(priv, status, timeout > MAX_RETRIES);
+ if (result < 0) {
+ return result;
+ }
+
+ outb_p(SMBHSTSTS_INTR, SMBHSTSTS(priv));
+ return 0;
}
/* wait for INTR bit as advised by Intel */
static void i801_wait_hwpec(struct i2c_device *priv)
{
- int timeout = 0;
- int status;
-
- dev_dbg(&priv->adapter.dev, "i801_wait_hwpec\n");
-
- do {
- usleep_range(250, 500);
- status = inb_p(SMBHSTSTS(priv));
- } while ((!(status & SMBHSTSTS_INTR)) && (timeout++ < MAX_RETRIES));
-
- if (timeout > MAX_RETRIES) {
- dev_dbg(&priv->adapter.dev, "PEC Timeout!\n");
- }
-
- outb_p(status, SMBHSTSTS(priv));
+ int timeout = 0;
+ int status;
+
+ dev_dbg(&priv->adapter.dev, "i801_wait_hwpec\n");
+
+ do {
+ usleep_range(250, 500);
+ status = inb_p(SMBHSTSTS(priv));
+ } while ((!(status & SMBHSTSTS_INTR)) && (timeout++ < MAX_RETRIES));
+
+ if (timeout > MAX_RETRIES) {
+ dev_dbg(&priv->adapter.dev, "PEC Timeout!\n");
+ }
+
+ outb_p(status, SMBHSTSTS(priv));
}
static int i801_block_transaction_by_block(struct i2c_device *priv, union i2c_smbus_data *data, char read_write, int hwpec)
{
- int i, len;
- int status;
-
- dev_dbg(&priv->adapter.dev, "i801_block_transaction_by_block\n");
-
- inb_p(SMBHSTCNT(priv)); /* reset the data buffer index */
-
- /* Use 32-byte buffer to process this transaction */
- if (read_write == I2C_SMBUS_WRITE) {
- len = data->block[0];
- outb_p(len, SMBHSTDAT0(priv));
- for (i = 0; i < len; i++) {
- outb_p(data->block[i+1], SMBBLKDAT(priv));
- }
- }
-
- status = i801_transaction(priv, I801_BLOCK_DATA | ENABLE_INT9 | I801_PEC_EN * hwpec);
- if (status) {
- return status;
- }
-
- if (read_write == I2C_SMBUS_READ) {
- len = inb_p(SMBHSTDAT0(priv));
- if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) {
- return -EPROTO;
- }
-
- data->block[0] = len;
- for (i = 0; i < len; i++) {
- data->block[i + 1] = inb_p(SMBBLKDAT(priv));
- }
- }
- return 0;
+ int i, len;
+ int status;
+
+ dev_dbg(&priv->adapter.dev, "i801_block_transaction_by_block\n");
+
+ inb_p(SMBHSTCNT(priv)); /* reset the data buffer index */
+
+ /* Use 32-byte buffer to process this transaction */
+ if (read_write == I2C_SMBUS_WRITE) {
+ len = data->block[0];
+ outb_p(len, SMBHSTDAT0(priv));
+ for (i = 0; i < len; i++) {
+ outb_p(data->block[i+1], SMBBLKDAT(priv));
+ }
+ }
+
+ status = i801_transaction(priv, I801_BLOCK_DATA | ENABLE_INT9 | I801_PEC_EN * hwpec);
+ if (status) {
+ return status;
+ }
+
+ if (read_write == I2C_SMBUS_READ) {
+ len = inb_p(SMBHSTDAT0(priv));
+ if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) {
+ return -EPROTO;
+ }
+
+ data->block[0] = len;
+ for (i = 0; i < len; i++) {
+ data->block[i + 1] = inb_p(SMBBLKDAT(priv));
+ }
+ }
+ return 0;
}
static int i801_block_transaction_byte_by_byte(struct i2c_device *priv, union i2c_smbus_data *data, char read_write, int command, int hwpec)
{
- int i, len;
- int smbcmd;
- int status;
- int result;
- int timeout;
-
- dev_dbg(&priv->adapter.dev, "i801_block_transaction_byte_by_byte\n");
-
- result = i801_check_pre(priv);
- if (result < 0) {
- return result;
- }
-
- len = data->block[0];
-
- if (read_write == I2C_SMBUS_WRITE) {
- outb_p(len, SMBHSTDAT0(priv));
- outb_p(data->block[1], SMBBLKDAT(priv));
- }
-
- for (i = 1; i <= len; i++) {
- if (i == len && read_write == I2C_SMBUS_READ) {
- if (command == I2C_SMBUS_I2C_BLOCK_DATA) {
- smbcmd = I801_I2C_BLOCK_LAST;
- } else {
- smbcmd = I801_BLOCK_LAST;
- }
- } else {
- if (command == I2C_SMBUS_I2C_BLOCK_DATA && read_write == I2C_SMBUS_READ) {
- smbcmd = I801_I2C_BLOCK_DATA;
- } else {
- smbcmd = I801_BLOCK_DATA;
- }
- }
- outb_p(smbcmd | ENABLE_INT9, SMBHSTCNT(priv));
-
- if (i == 1) {
- outb_p(inb(SMBHSTCNT(priv)) | I801_START, SMBHSTCNT(priv));
- }
- /* We will always wait for a fraction of a second! */
- timeout = 0;
- do {
- usleep_range(250, 500);
- status = inb_p(SMBHSTSTS(priv));
- } while ((!(status & SMBHSTSTS_BYTE_DONE)) && (timeout++ < MAX_RETRIES));
-
- result = i801_check_post(priv, status, timeout > MAX_RETRIES);
- if (result < 0) {
- return result;
- }
- if (i == 1 && read_write == I2C_SMBUS_READ && command != I2C_SMBUS_I2C_BLOCK_DATA) {
- len = inb_p(SMBHSTDAT0(priv));
- if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) {
- dev_err(&priv->adapter.dev, "Illegal SMBus block read size %d\n", len);
- /* Recover */
- while (inb_p(SMBHSTSTS(priv)) & SMBHSTSTS_HOST_BUSY) {
- outb_p(SMBHSTSTS_BYTE_DONE, SMBHSTSTS(priv));
- }
- outb_p(SMBHSTSTS_INTR, SMBHSTSTS(priv));
- return -EPROTO;
- }
- data->block[0] = len;
- }
-
- /* Retrieve/store value in SMBBLKDAT */
- if (read_write == I2C_SMBUS_READ) {
- data->block[i] = inb_p(SMBBLKDAT(priv));
- }
- if (read_write == I2C_SMBUS_WRITE && i+1 <= len) {
- outb_p(data->block[i+1], SMBBLKDAT(priv));
- }
- /* signals SMBBLKDAT ready */
- outb_p(SMBHSTSTS_BYTE_DONE | SMBHSTSTS_INTR, SMBHSTSTS(priv));
- }
-
- return 0;
+ int i, len;
+ int smbcmd;
+ int status;
+ int result;
+ int timeout;
+
+ dev_dbg(&priv->adapter.dev, "i801_block_transaction_byte_by_byte\n");
+
+ result = i801_check_pre(priv);
+ if (result < 0) {
+ return result;
+ }
+
+ len = data->block[0];
+
+ if (read_write == I2C_SMBUS_WRITE) {
+ outb_p(len, SMBHSTDAT0(priv));
+ outb_p(data->block[1], SMBBLKDAT(priv));
+ }
+
+ for (i = 1; i <= len; i++) {
+ if (i == len && read_write == I2C_SMBUS_READ) {
+ if (command == I2C_SMBUS_I2C_BLOCK_DATA) {
+ smbcmd = I801_I2C_BLOCK_LAST;
+ } else {
+ smbcmd = I801_BLOCK_LAST;
+ }
+ } else {
+ if (command == I2C_SMBUS_I2C_BLOCK_DATA && read_write == I2C_SMBUS_READ) {
+ smbcmd = I801_I2C_BLOCK_DATA;
+ } else {
+ smbcmd = I801_BLOCK_DATA;
+ }
+ }
+ outb_p(smbcmd | ENABLE_INT9, SMBHSTCNT(priv));
+
+ if (i == 1) {
+ outb_p(inb(SMBHSTCNT(priv)) | I801_START, SMBHSTCNT(priv));
+ }
+ /* We will always wait for a fraction of a second! */
+ timeout = 0;
+ do {
+ usleep_range(250, 500);
+ status = inb_p(SMBHSTSTS(priv));
+ } while ((!(status & SMBHSTSTS_BYTE_DONE)) && (timeout++ < MAX_RETRIES));
+
+ result = i801_check_post(priv, status, timeout > MAX_RETRIES);
+ if (result < 0) {
+ return result;
+ }
+ if (i == 1 && read_write == I2C_SMBUS_READ && command != I2C_SMBUS_I2C_BLOCK_DATA) {
+ len = inb_p(SMBHSTDAT0(priv));
+ if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) {
+ dev_err(&priv->adapter.dev, "Illegal SMBus block read size %d\n", len);
+ /* Recover */
+ while (inb_p(SMBHSTSTS(priv)) & SMBHSTSTS_HOST_BUSY) {
+ outb_p(SMBHSTSTS_BYTE_DONE, SMBHSTSTS(priv));
+ }
+ outb_p(SMBHSTSTS_INTR, SMBHSTSTS(priv));
+ return -EPROTO;
+ }
+ data->block[0] = len;
+ }
+
+ /* Retrieve/store value in SMBBLKDAT */
+ if (read_write == I2C_SMBUS_READ) {
+ data->block[i] = inb_p(SMBBLKDAT(priv));
+ }
+ if (read_write == I2C_SMBUS_WRITE && i+1 <= len) {
+ outb_p(data->block[i+1], SMBBLKDAT(priv));
+ }
+ /* signals SMBBLKDAT ready */
+ outb_p(SMBHSTSTS_BYTE_DONE | SMBHSTSTS_INTR, SMBHSTSTS(priv));
+ }
+
+ return 0;
}
static int i801_set_block_buffer_mode(struct i2c_device *priv)
{
- dev_dbg(&priv->adapter.dev, "i801_set_block_buffer_mode\n");
-
- outb_p(inb_p(SMBAUXCTL(priv)) | SMBAUXCTL_E32B, SMBAUXCTL(priv));
- if ((inb_p(SMBAUXCTL(priv)) & SMBAUXCTL_E32B) == 0) {
- return -EIO;
- }
- return 0;
+ dev_dbg(&priv->adapter.dev, "i801_set_block_buffer_mode\n");
+
+ outb_p(inb_p(SMBAUXCTL(priv)) | SMBAUXCTL_E32B, SMBAUXCTL(priv));
+ if ((inb_p(SMBAUXCTL(priv)) & SMBAUXCTL_E32B) == 0) {
+ return -EIO;
+ }
+ return 0;
}
/* Block transaction function */
static int i801_block_transaction(struct i2c_device *priv, union i2c_smbus_data *data, char read_write, int command, int hwpec)
{
- int result = 0;
- //unsigned char hostc;
-
- dev_dbg(&priv->adapter.dev, "i801_block_transaction\n");
-
- if (command == I2C_SMBUS_I2C_BLOCK_DATA) {
- if (read_write == I2C_SMBUS_WRITE) {
- /* set I2C_EN bit in configuration register */
- //TODO: Figure out the right thing to do here...
- //pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &hostc);
- //pci_write_config_byte(priv->pci_dev, SMBHSTCFG, hostc | SMBHSTCFG_I2C_EN);
- } else if (!(priv->features & FEATURE_I2C_BLOCK_READ)) {
- dev_err(&priv->adapter.dev, "I2C block read is unsupported!\n");
- return -EOPNOTSUPP;
- }
- }
-
- if (read_write == I2C_SMBUS_WRITE || command == I2C_SMBUS_I2C_BLOCK_DATA) {
- if (data->block[0] < 1) {
- data->block[0] = 1;
- }
- if (data->block[0] > I2C_SMBUS_BLOCK_MAX) {
- data->block[0] = I2C_SMBUS_BLOCK_MAX;
- }
- } else {
- data->block[0] = 32; /* max for SMBus block reads */
- }
-
- /* Experience has shown that the block buffer can only be used for
- SMBus (not I2C) block transactions, even though the datasheet
- doesn't mention this limitation. */
- if ((priv->features & FEATURE_BLOCK_BUFFER) && command != I2C_SMBUS_I2C_BLOCK_DATA && i801_set_block_buffer_mode(priv) == 0) {
- result = i801_block_transaction_by_block(priv, data, read_write, hwpec);
- } else {
- result = i801_block_transaction_byte_by_byte(priv, data, read_write, command, hwpec);
- }
- if (result == 0 && hwpec) {
- i801_wait_hwpec(priv);
- }
- if (command == I2C_SMBUS_I2C_BLOCK_DATA && read_write == I2C_SMBUS_WRITE) {
- /* restore saved configuration register value */
- //TODO: Figure out the right thing to do here...
- //pci_write_config_byte(priv->pci_dev, SMBHSTCFG, hostc);
- }
- return result;
+ int result = 0;
+ //unsigned char hostc;
+
+ dev_dbg(&priv->adapter.dev, "i801_block_transaction\n");
+
+ if (command == I2C_SMBUS_I2C_BLOCK_DATA) {
+ if (read_write == I2C_SMBUS_WRITE) {
+ /* set I2C_EN bit in configuration register */
+ //TODO: Figure out the right thing to do here...
+ //pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &hostc);
+ //pci_write_config_byte(priv->pci_dev, SMBHSTCFG, hostc | SMBHSTCFG_I2C_EN);
+ } else if (!(priv->features & FEATURE_I2C_BLOCK_READ)) {
+ dev_err(&priv->adapter.dev, "I2C block read is unsupported!\n");
+ return -EOPNOTSUPP;
+ }
+ }
+
+ if (read_write == I2C_SMBUS_WRITE || command == I2C_SMBUS_I2C_BLOCK_DATA) {
+ if (data->block[0] < 1) {
+ data->block[0] = 1;
+ }
+ if (data->block[0] > I2C_SMBUS_BLOCK_MAX) {
+ data->block[0] = I2C_SMBUS_BLOCK_MAX;
+ }
+ } else {
+ data->block[0] = 32; /* max for SMBus block reads */
+ }
+
+ /* Experience has shown that the block buffer can only be used for
+ SMBus (not I2C) block transactions, even though the datasheet
+ doesn't mention this limitation. */
+ if ((priv->features & FEATURE_BLOCK_BUFFER) && command != I2C_SMBUS_I2C_BLOCK_DATA && i801_set_block_buffer_mode(priv) == 0) {
+ result = i801_block_transaction_by_block(priv, data, read_write, hwpec);
+ } else {
+ result = i801_block_transaction_byte_by_byte(priv, data, read_write, command, hwpec);
+ }
+ if (result == 0 && hwpec) {
+ i801_wait_hwpec(priv);
+ }
+ if (command == I2C_SMBUS_I2C_BLOCK_DATA && read_write == I2C_SMBUS_WRITE) {
+ /* restore saved configuration register value */
+ //TODO: Figure out the right thing to do here...
+ //pci_write_config_byte(priv->pci_dev, SMBHSTCFG, hostc);
+ }
+ return result;
}
/* Return negative errno on error. */
static s32 i801_access(struct i2c_adapter *adap, u16 addr, unsigned short flags, char read_write, u8 command, int size, union i2c_smbus_data *data)
{
- int hwpec;
- int block = 0;
- int ret, xact = 0;
- struct i2c_device *priv = i2c_get_adapdata(adap);
-
- dev_dbg(&priv->adapter.dev, "i801_access (addr=%0d) flags=%x read_write=%x command=%x size=%x",
- addr, flags, read_write, command, size );
-
- hwpec = (priv->features & FEATURE_SMBUS_PEC) && (flags & I2C_CLIENT_PEC) && size != I2C_SMBUS_QUICK && size != I2C_SMBUS_I2C_BLOCK_DATA;
-
- switch (size) {
- case I2C_SMBUS_QUICK:
- dev_dbg(&priv->adapter.dev, " [acc] SMBUS_QUICK\n");
- outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMBHSTADD(priv));
- xact = I801_QUICK;
- break;
- case I2C_SMBUS_BYTE:
- dev_dbg(&priv->adapter.dev, " [acc] SMBUS_BYTE\n");
-
- outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMBHSTADD(priv));
- if (read_write == I2C_SMBUS_WRITE) {
- outb_p(command, SMBHSTCMD(priv));
- }
- xact = I801_BYTE;
- break;
- case I2C_SMBUS_BYTE_DATA:
- dev_dbg(&priv->adapter.dev, " [acc] SMBUS_BYTE_DATA\n");
- outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMBHSTADD(priv));
- outb_p(command, SMBHSTCMD(priv));
- if (read_write == I2C_SMBUS_WRITE) {
- outb_p(data->byte, SMBHSTDAT0(priv));
- }
- xact = I801_BYTE_DATA;
- break;
- case I2C_SMBUS_WORD_DATA:
- dev_dbg(&priv->adapter.dev, " [acc] SMBUS_WORD_DATA\n");
- outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMBHSTADD(priv));
- outb_p(command, SMBHSTCMD(priv));
- if (read_write == I2C_SMBUS_WRITE) {
- outb_p(data->word & 0xff, SMBHSTDAT0(priv));
- outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1(priv));
- }
- xact = I801_WORD_DATA;
- break;
- case I2C_SMBUS_BLOCK_DATA:
- dev_dbg(&priv->adapter.dev, " [acc] SMBUS_BLOCK_DATA\n");
- outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMBHSTADD(priv));
- outb_p(command, SMBHSTCMD(priv));
- block = 1;
- break;
- case I2C_SMBUS_I2C_BLOCK_DATA:
- dev_dbg(&priv->adapter.dev, " [acc] SMBUS_I2C_BLOCK_DATA\n");
- /* NB: page 240 of ICH5 datasheet shows that the R/#W
- * bit should be cleared here, even when reading */
- outb_p((addr & 0x7f) << 1, SMBHSTADD(priv));
- if (read_write == I2C_SMBUS_READ) {
- /* NB: page 240 of ICH5 datasheet also shows
- * that DATA1 is the cmd field when reading */
- outb_p(command, SMBHSTDAT1(priv));
- } else {
- outb_p(command, SMBHSTCMD(priv));
- }
- block = 1;
- break;
- default:
- dev_dbg(&priv->adapter.dev, " [acc] Unsupported transaction %d\n", size);
- return -EOPNOTSUPP;
- }
-
- if (hwpec) { /* enable/disable hardware PEC */
- dev_dbg(&priv->adapter.dev, " [acc] hwpec: yes\n");
- outb_p(inb_p(SMBAUXCTL(priv)) | SMBAUXCTL_CRC, SMBAUXCTL(priv));
- } else {
- dev_dbg(&priv->adapter.dev, " [acc] hwpec: no\n");
- outb_p(inb_p(SMBAUXCTL(priv)) & (~SMBAUXCTL_CRC), SMBAUXCTL(priv));
- }
-
- if (block) {
- //ret = 0;
- dev_dbg(&priv->adapter.dev, " [acc] block: yes\n");
- ret = i801_block_transaction(priv, data, read_write, size, hwpec);
- } else {
- dev_dbg(&priv->adapter.dev, " [acc] block: no\n");
- ret = i801_transaction(priv, xact | ENABLE_INT9);
- }
-
- /* Some BIOSes don't like it when PEC is enabled at reboot or resume
- time, so we forcibly disable it after every transaction. Turn off
- E32B for the same reason. */
- if (hwpec || block) {
- dev_dbg(&priv->adapter.dev, " [acc] hwpec || block\n");
- outb_p(inb_p(SMBAUXCTL(priv)) & ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B), SMBAUXCTL(priv));
- }
- if (block) {
- dev_dbg(&priv->adapter.dev, " [acc] block\n");
- return ret;
- }
- if (ret) {
- dev_dbg(&priv->adapter.dev, " [acc] ret %d\n", ret);
- return ret;
- }
- if ((read_write == I2C_SMBUS_WRITE) || (xact == I801_QUICK)) {
- dev_dbg(&priv->adapter.dev, " [acc] I2C_SMBUS_WRITE || I801_QUICK -> ret 0\n");
- return 0;
- }
-
- switch (xact & 0x7f) {
- case I801_BYTE: /* Result put in SMBHSTDAT0 */
- case I801_BYTE_DATA:
- dev_dbg(&priv->adapter.dev, " [acc] I801_BYTE or I801_BYTE_DATA\n");
- data->byte = inb_p(SMBHSTDAT0(priv));
- break;
- case I801_WORD_DATA:
- dev_dbg(&priv->adapter.dev, " [acc] I801_WORD_DATA\n");
- data->word = inb_p(SMBHSTDAT0(priv)) + (inb_p(SMBHSTDAT1(priv)) << 8);
- break;
- }
- return 0;
+ int hwpec;
+ int block = 0;
+ int ret, xact = 0;
+ struct i2c_device *priv = i2c_get_adapdata(adap);
+
+ dev_dbg(&priv->adapter.dev, "i801_access (addr=%0d) flags=%x read_write=%x command=%x size=%x",
+ addr, flags, read_write, command, size );
+
+ hwpec = (priv->features & FEATURE_SMBUS_PEC) && (flags & I2C_CLIENT_PEC) && size != I2C_SMBUS_QUICK && size != I2C_SMBUS_I2C_BLOCK_DATA;
+
+ switch (size) {
+ case I2C_SMBUS_QUICK:
+ dev_dbg(&priv->adapter.dev, " [acc] SMBUS_QUICK\n");
+ outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMBHSTADD(priv));
+ xact = I801_QUICK;
+ break;
+ case I2C_SMBUS_BYTE:
+ dev_dbg(&priv->adapter.dev, " [acc] SMBUS_BYTE\n");
+
+ outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMBHSTADD(priv));
+ if (read_write == I2C_SMBUS_WRITE) {
+ outb_p(command, SMBHSTCMD(priv));
+ }
+ xact = I801_BYTE;
+ break;
+ case I2C_SMBUS_BYTE_DATA:
+ dev_dbg(&priv->adapter.dev, " [acc] SMBUS_BYTE_DATA\n");
+ outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMBHSTADD(priv));
+ outb_p(command, SMBHSTCMD(priv));
+ if (read_write == I2C_SMBUS_WRITE) {
+ outb_p(data->byte, SMBHSTDAT0(priv));
+ }
+ xact = I801_BYTE_DATA;
+ break;
+ case I2C_SMBUS_WORD_DATA:
+ dev_dbg(&priv->adapter.dev, " [acc] SMBUS_WORD_DATA\n");
+ outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMBHSTADD(priv));
+ outb_p(command, SMBHSTCMD(priv));
+ if (read_write == I2C_SMBUS_WRITE) {
+ outb_p(data->word & 0xff, SMBHSTDAT0(priv));
+ outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1(priv));
+ }
+ xact = I801_WORD_DATA;
+ break;
+ case I2C_SMBUS_BLOCK_DATA:
+ dev_dbg(&priv->adapter.dev, " [acc] SMBUS_BLOCK_DATA\n");
+ outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMBHSTADD(priv));
+ outb_p(command, SMBHSTCMD(priv));
+ block = 1;
+ break;
+ case I2C_SMBUS_I2C_BLOCK_DATA:
+ dev_dbg(&priv->adapter.dev, " [acc] SMBUS_I2C_BLOCK_DATA\n");
+ /* NB: page 240 of ICH5 datasheet shows that the R/#W
+ * bit should be cleared here, even when reading */
+ outb_p((addr & 0x7f) << 1, SMBHSTADD(priv));
+ if (read_write == I2C_SMBUS_READ) {
+ /* NB: page 240 of ICH5 datasheet also shows
+ * that DATA1 is the cmd field when reading */
+ outb_p(command, SMBHSTDAT1(priv));
+ } else {
+ outb_p(command, SMBHSTCMD(priv));
+ }
+ block = 1;
+ break;
+ default:
+ dev_dbg(&priv->adapter.dev, " [acc] Unsupported transaction %d\n", size);
+ return -EOPNOTSUPP;
+ }
+
+ if (hwpec) { /* enable/disable hardware PEC */
+ dev_dbg(&priv->adapter.dev, " [acc] hwpec: yes\n");
+ outb_p(inb_p(SMBAUXCTL(priv)) | SMBAUXCTL_CRC, SMBAUXCTL(priv));
+ } else {
+ dev_dbg(&priv->adapter.dev, " [acc] hwpec: no\n");
+ outb_p(inb_p(SMBAUXCTL(priv)) & (~SMBAUXCTL_CRC), SMBAUXCTL(priv));
+ }
+
+ if (block) {
+ //ret = 0;
+ dev_dbg(&priv->adapter.dev, " [acc] block: yes\n");
+ ret = i801_block_transaction(priv, data, read_write, size, hwpec);
+ } else {
+ dev_dbg(&priv->adapter.dev, " [acc] block: no\n");
+ ret = i801_transaction(priv, xact | ENABLE_INT9);
+ }
+
+ /* Some BIOSes don't like it when PEC is enabled at reboot or resume
+ time, so we forcibly disable it after every transaction. Turn off
+ E32B for the same reason. */
+ if (hwpec || block) {
+ dev_dbg(&priv->adapter.dev, " [acc] hwpec || block\n");
+ outb_p(inb_p(SMBAUXCTL(priv)) & ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B), SMBAUXCTL(priv));
+ }
+ if (block) {
+ dev_dbg(&priv->adapter.dev, " [acc] block\n");
+ return ret;
+ }
+ if (ret) {
+ dev_dbg(&priv->adapter.dev, " [acc] ret %d\n", ret);
+ return ret;
+ }
+ if ((read_write == I2C_SMBUS_WRITE) || (xact == I801_QUICK)) {
+ dev_dbg(&priv->adapter.dev, " [acc] I2C_SMBUS_WRITE || I801_QUICK -> ret 0\n");
+ return 0;
+ }
+
+ switch (xact & 0x7f) {
+ case I801_BYTE: /* Result put in SMBHSTDAT0 */
+ case I801_BYTE_DATA:
+ dev_dbg(&priv->adapter.dev, " [acc] I801_BYTE or I801_BYTE_DATA\n");
+ data->byte = inb_p(SMBHSTDAT0(priv));
+ break;
+ case I801_WORD_DATA:
+ dev_dbg(&priv->adapter.dev, " [acc] I801_WORD_DATA\n");
+ data->word = inb_p(SMBHSTDAT0(priv)) + (inb_p(SMBHSTDAT1(priv)) << 8);
+ break;
+ }
+ return 0;
}
static u32 i801_func(struct i2c_adapter *adapter)
{
- struct i2c_device *priv = i2c_get_adapdata(adapter);
-
- /* original settings
- u32 f = I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
- I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
- I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_WRITE_I2C_BLOCK |
- ((priv->features & FEATURE_SMBUS_PEC) ? I2C_FUNC_SMBUS_PEC : 0) |
- ((priv->features & FEATURE_I2C_BLOCK_READ) ?
- I2C_FUNC_SMBUS_READ_I2C_BLOCK : 0);
- */
-
- // http://lxr.free-electrons.com/source/include/uapi/linux/i2c.h#L85
-
- u32 f =
- I2C_FUNC_I2C | /* 0x00000001 (I enabled this one) */
- !I2C_FUNC_10BIT_ADDR | /* 0x00000002 */
- !I2C_FUNC_PROTOCOL_MANGLING | /* 0x00000004 */
- ((priv->features & FEATURE_SMBUS_PEC) ? I2C_FUNC_SMBUS_PEC : 0) | /* 0x00000008 */
- !I2C_FUNC_SMBUS_BLOCK_PROC_CALL | /* 0x00008000 */
- I2C_FUNC_SMBUS_QUICK | /* 0x00010000 */
- !I2C_FUNC_SMBUS_READ_BYTE | /* 0x00020000 */
- !I2C_FUNC_SMBUS_WRITE_BYTE | /* 0x00040000 */
- !I2C_FUNC_SMBUS_READ_BYTE_DATA | /* 0x00080000 */
- !I2C_FUNC_SMBUS_WRITE_BYTE_DATA | /* 0x00100000 */
- !I2C_FUNC_SMBUS_READ_WORD_DATA | /* 0x00200000 */
- !I2C_FUNC_SMBUS_WRITE_WORD_DATA | /* 0x00400000 */
- !I2C_FUNC_SMBUS_PROC_CALL | /* 0x00800000 */
- !I2C_FUNC_SMBUS_READ_BLOCK_DATA | /* 0x01000000 */
- !I2C_FUNC_SMBUS_WRITE_BLOCK_DATA | /* 0x02000000 */
- ((priv->features & FEATURE_I2C_BLOCK_READ) ? I2C_FUNC_SMBUS_READ_I2C_BLOCK : 0) | /* 0x04000000 */
- I2C_FUNC_SMBUS_WRITE_I2C_BLOCK | /* 0x08000000 */
-
- I2C_FUNC_SMBUS_BYTE | /* _READ_BYTE _WRITE_BYTE */
- I2C_FUNC_SMBUS_BYTE_DATA | /* _READ_BYTE_DATA _WRITE_BYTE_DATA */
- I2C_FUNC_SMBUS_WORD_DATA | /* _READ_WORD_DATA _WRITE_WORD_DATA */
- I2C_FUNC_SMBUS_BLOCK_DATA | /* _READ_BLOCK_DATA _WRITE_BLOCK_DATA */
- !I2C_FUNC_SMBUS_I2C_BLOCK | /* _READ_I2C_BLOCK _WRITE_I2C_BLOCK */
- !I2C_FUNC_SMBUS_EMUL; /* _QUICK _BYTE _BYTE_DATA _WORD_DATA _PROC_CALL _WRITE_BLOCK_DATA _I2C_BLOCK _PEC */
- return f;
+ struct i2c_device *priv = i2c_get_adapdata(adapter);
+
+ /* original settings
+ u32 f = I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+ I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+ I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_WRITE_I2C_BLOCK |
+ ((priv->features & FEATURE_SMBUS_PEC) ? I2C_FUNC_SMBUS_PEC : 0) |
+ ((priv->features & FEATURE_I2C_BLOCK_READ) ?
+ I2C_FUNC_SMBUS_READ_I2C_BLOCK : 0);
+ */
+
+ // http://lxr.free-electrons.com/source/include/uapi/linux/i2c.h#L85
+
+ u32 f =
+ I2C_FUNC_I2C | /* 0x00000001 (I enabled this one) */
+ !I2C_FUNC_10BIT_ADDR | /* 0x00000002 */
+ !I2C_FUNC_PROTOCOL_MANGLING | /* 0x00000004 */
+ ((priv->features & FEATURE_SMBUS_PEC) ? I2C_FUNC_SMBUS_PEC : 0) | /* 0x00000008 */
+ !I2C_FUNC_SMBUS_BLOCK_PROC_CALL | /* 0x00008000 */
+ I2C_FUNC_SMBUS_QUICK | /* 0x00010000 */
+ !I2C_FUNC_SMBUS_READ_BYTE | /* 0x00020000 */
+ !I2C_FUNC_SMBUS_WRITE_BYTE | /* 0x00040000 */
+ !I2C_FUNC_SMBUS_READ_BYTE_DATA | /* 0x00080000 */
+ !I2C_FUNC_SMBUS_WRITE_BYTE_DATA | /* 0x00100000 */
+ !I2C_FUNC_SMBUS_READ_WORD_DATA | /* 0x00200000 */
+ !I2C_FUNC_SMBUS_WRITE_WORD_DATA | /* 0x00400000 */
+ !I2C_FUNC_SMBUS_PROC_CALL | /* 0x00800000 */
+ !I2C_FUNC_SMBUS_READ_BLOCK_DATA | /* 0x01000000 */
+ !I2C_FUNC_SMBUS_WRITE_BLOCK_DATA | /* 0x02000000 */
+ ((priv->features & FEATURE_I2C_BLOCK_READ) ? I2C_FUNC_SMBUS_READ_I2C_BLOCK : 0) | /* 0x04000000 */
+ I2C_FUNC_SMBUS_WRITE_I2C_BLOCK | /* 0x08000000 */
+
+ I2C_FUNC_SMBUS_BYTE | /* _READ_BYTE _WRITE_BYTE */
+ I2C_FUNC_SMBUS_BYTE_DATA | /* _READ_BYTE_DATA _WRITE_BYTE_DATA */
+ I2C_FUNC_SMBUS_WORD_DATA | /* _READ_WORD_DATA _WRITE_WORD_DATA */
+ I2C_FUNC_SMBUS_BLOCK_DATA | /* _READ_BLOCK_DATA _WRITE_BLOCK_DATA */
+ !I2C_FUNC_SMBUS_I2C_BLOCK | /* _READ_I2C_BLOCK _WRITE_I2C_BLOCK */
+ !I2C_FUNC_SMBUS_EMUL; /* _QUICK _BYTE _BYTE_DATA _WORD_DATA _PROC_CALL _WRITE_BLOCK_DATA _I2C_BLOCK _PEC */
+ return f;
}
static const struct i2c_algorithm smbus_algorithm = {
- .smbus_xfer = i801_access,
- .functionality = i801_func,
+ .smbus_xfer = i801_access,
+ .functionality = i801_func,
};
********************************/
int pi2c_probe(struct platform_device *pldev)
{
- int err;
- struct i2c_device *priv;
- struct resource *res;
-
- dev_dbg(&pldev->dev, "pi2c_probe(pldev = %p '%s')\n", pldev, pldev->name);
-
- priv = kzalloc(sizeof(struct i2c_device), GFP_KERNEL);
- if (!priv) {
- return -ENOMEM;
- }
-
- i2c_set_adapdata(&priv->adapter, priv);
- priv->adapter.owner = THIS_MODULE;
- priv->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
- priv->adapter.algo = &smbus_algorithm;
-
- res = platform_get_resource(pldev, IORESOURCE_MEM, 0);
- priv->smba = (unsigned long)ioremap_nocache(res->start, resource_size(res));
-
- priv->pldev = pldev;
- pldev->dev.platform_data = priv;
-
- priv->features |= FEATURE_IDF;
- priv->features |= FEATURE_I2C_BLOCK_READ;
- priv->features |= FEATURE_SMBUS_PEC;
- priv->features |= FEATURE_BLOCK_BUFFER;
-
- //init_MUTEX(&lddata->sem);
- init_rwsem(&priv->rw_sem);
-
- /* set up the sysfs linkage to our parent device */
- priv->adapter.dev.parent = &pldev->dev;
-
- /* Retry up to 3 times on lost arbitration */
- priv->adapter.retries = 3;
-
- //snprintf(priv->adapter.name, sizeof(priv->adapter.name), "Fake SMBus I801 adapter at %04lx", priv->smba);
- snprintf(priv->adapter.name, sizeof(priv->adapter.name), "Fake SMBus I801 adapter");
-
- err = i2c_add_adapter(&priv->adapter);
- if (err) {
- dev_err(&priv->adapter.dev, "Failed to add SMBus adapter\n");
- return err;
- }
-
- return 0;
+ int err;
+ struct i2c_device *priv;
+ struct resource *res;
+
+ dev_dbg(&pldev->dev, "pi2c_probe(pldev = %p '%s')\n", pldev, pldev->name);
+
+ priv = kzalloc(sizeof(struct i2c_device), GFP_KERNEL);
+ if (!priv) {
+ return -ENOMEM;
+ }
+
+ i2c_set_adapdata(&priv->adapter, priv);
+ priv->adapter.owner = THIS_MODULE;
+ priv->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
+ priv->adapter.algo = &smbus_algorithm;
+
+ res = platform_get_resource(pldev, IORESOURCE_MEM, 0);
+ priv->smba = (unsigned long)ioremap_nocache(res->start, resource_size(res));
+
+ priv->pldev = pldev;
+ pldev->dev.platform_data = priv;
+
+ priv->features |= FEATURE_IDF;
+ priv->features |= FEATURE_I2C_BLOCK_READ;
+ priv->features |= FEATURE_SMBUS_PEC;
+ priv->features |= FEATURE_BLOCK_BUFFER;
+
+ //init_MUTEX(&lddata->sem);
+ init_rwsem(&priv->rw_sem);
+
+ /* set up the sysfs linkage to our parent device */
+ priv->adapter.dev.parent = &pldev->dev;
+
+ /* Retry up to 3 times on lost arbitration */
+ priv->adapter.retries = 3;
+
+ //snprintf(priv->adapter.name, sizeof(priv->adapter.name), "Fake SMBus I801 adapter at %04lx", priv->smba);
+ snprintf(priv->adapter.name, sizeof(priv->adapter.name), "Fake SMBus I801 adapter");
+
+ err = i2c_add_adapter(&priv->adapter);
+ if (err) {
+ dev_err(&priv->adapter.dev, "Failed to add SMBus adapter\n");
+ return err;
+ }
+
+ return 0;
}
int pi2c_remove(struct platform_device *pldev)
{
- struct i2c_device *lddev;
- dev_dbg(&pldev->dev, "pi2c_remove(pldev = %p '%s')\n", pldev, pldev->name);
-
- lddev = (struct i2c_device *)pldev->dev.platform_data;
-
- i2c_del_adapter(&lddev->adapter);
-
- //TODO: Figure out the right thing to do here...
- //pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg);
- //pci_release_region(dev, SMBBAR);
- //pci_set_drvdata(dev, NULL);
-
- //cdev_del(&lddev->cdev);
- if(lddev != 0) {
- kfree(lddev);
- pldev->dev.platform_data = 0;
- }
-
- return 0;
+ struct i2c_device *lddev;
+ dev_dbg(&pldev->dev, "pi2c_remove(pldev = %p '%s')\n", pldev, pldev->name);
+
+ lddev = (struct i2c_device *)pldev->dev.platform_data;
+
+ i2c_del_adapter(&lddev->adapter);
+
+ //TODO: Figure out the right thing to do here...
+ //pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg);
+ //pci_release_region(dev, SMBBAR);
+ //pci_set_drvdata(dev, NULL);
+
+ //cdev_del(&lddev->cdev);
+ if(lddev != 0) {
+ kfree(lddev);
+ pldev->dev.platform_data = 0;
+ }
+
+ return 0;
}
struct platform_driver i2c_plat_driver_i = {
- .probe = pi2c_probe,
- .remove = pi2c_remove,
- .driver = {
- .name = KP_DRIVER_NAME_I2C,
- .owner = THIS_MODULE,
- },
+ .probe = pi2c_probe,
+ .remove = pi2c_remove,
+ .driver = {
+ .name = KP_DRIVER_NAME_I2C,
+ .owner = THIS_MODULE,
+ },
};
module_platform_driver(i2c_plat_driver_i);
projects / platform / kernel / linux-rpi.git / commitdiff