-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */
/*
* Input event codes
*
#define KEY_TITLE 0x171
#define KEY_SUBTITLE 0x172
#define KEY_ANGLE 0x173
-#define KEY_ZOOM 0x174
+#define KEY_FULL_SCREEN 0x174 /* AC View Toggle */
+#define KEY_ZOOM KEY_FULL_SCREEN
#define KEY_MODE 0x175
#define KEY_KEYBOARD 0x176
-#define KEY_SCREEN 0x177
+#define KEY_ASPECT_RATIO 0x177 /* HUTRR37: Aspect */
+#define KEY_SCREEN KEY_ASPECT_RATIO
#define KEY_PC 0x178 /* Media Select Computer */
#define KEY_TV 0x179 /* Media Select TV */
#define KEY_TV2 0x17a /* Media Select Cable */
#define KEY_SCREENSAVER 0x245 /* AL Screen Saver */
#define KEY_VOICECOMMAND 0x246 /* Listening Voice Command */
#define KEY_ASSISTANT 0x247 /* AL Context-aware desktop assistant */
+#define KEY_KBD_LAYOUT_NEXT 0x248 /* AC Next Keyboard Layout Select */
#define KEY_BRIGHTNESS_MIN 0x250 /* Set Brightness to Minimum */
#define KEY_BRIGHTNESS_MAX 0x251 /* Set Brightness to Maximum */
*/
#define KEY_DATA 0x277
#define KEY_ONSCREEN_KEYBOARD 0x278
+/* Electronic privacy screen control */
+#define KEY_PRIVACY_SCREEN_TOGGLE 0x279
+
+/* Select an area of screen to be copied */
+#define KEY_SELECTIVE_SCREENSHOT 0x27a
+
+/*
+ * Some keyboards have keys which do not have a defined meaning, these keys
+ * are intended to be programmed / bound to macros by the user. For most
+ * keyboards with these macro-keys the key-sequence to inject, or action to
+ * take, is all handled by software on the host side. So from the kernel's
+ * point of view these are just normal keys.
+ *
+ * The KEY_MACRO# codes below are intended for such keys, which may be labeled
+ * e.g. G1-G18, or S1 - S30. The KEY_MACRO# codes MUST NOT be used for keys
+ * where the marking on the key does indicate a defined meaning / purpose.
+ *
+ * The KEY_MACRO# codes MUST also NOT be used as fallback for when no existing
+ * KEY_FOO define matches the marking / purpose. In this case a new KEY_FOO
+ * define MUST be added.
+ */
+#define KEY_MACRO1 0x290
+#define KEY_MACRO2 0x291
+#define KEY_MACRO3 0x292
+#define KEY_MACRO4 0x293
+#define KEY_MACRO5 0x294
+#define KEY_MACRO6 0x295
+#define KEY_MACRO7 0x296
+#define KEY_MACRO8 0x297
+#define KEY_MACRO9 0x298
+#define KEY_MACRO10 0x299
+#define KEY_MACRO11 0x29a
+#define KEY_MACRO12 0x29b
+#define KEY_MACRO13 0x29c
+#define KEY_MACRO14 0x29d
+#define KEY_MACRO15 0x29e
+#define KEY_MACRO16 0x29f
+#define KEY_MACRO17 0x2a0
+#define KEY_MACRO18 0x2a1
+#define KEY_MACRO19 0x2a2
+#define KEY_MACRO20 0x2a3
+#define KEY_MACRO21 0x2a4
+#define KEY_MACRO22 0x2a5
+#define KEY_MACRO23 0x2a6
+#define KEY_MACRO24 0x2a7
+#define KEY_MACRO25 0x2a8
+#define KEY_MACRO26 0x2a9
+#define KEY_MACRO27 0x2aa
+#define KEY_MACRO28 0x2ab
+#define KEY_MACRO29 0x2ac
+#define KEY_MACRO30 0x2ad
+
+/*
+ * Some keyboards with the macro-keys described above have some extra keys
+ * for controlling the host-side software responsible for the macro handling:
+ * -A macro recording start/stop key. Note that not all keyboards which emit
+ * KEY_MACRO_RECORD_START will also emit KEY_MACRO_RECORD_STOP if
+ * KEY_MACRO_RECORD_STOP is not advertised, then KEY_MACRO_RECORD_START
+ * should be interpreted as a recording start/stop toggle;
+ * -Keys for switching between different macro (pre)sets, either a key for
+ * cycling through the configured presets or keys to directly select a preset.
+ */
+#define KEY_MACRO_RECORD_START 0x2b0
+#define KEY_MACRO_RECORD_STOP 0x2b1
+#define KEY_MACRO_PRESET_CYCLE 0x2b2
+#define KEY_MACRO_PRESET1 0x2b3
+#define KEY_MACRO_PRESET2 0x2b4
+#define KEY_MACRO_PRESET3 0x2b5
+
+/*
+ * Some keyboards have a buildin LCD panel where the contents are controlled
+ * by the host. Often these have a number of keys directly below the LCD
+ * intended for controlling a menu shown on the LCD. These keys often don't
+ * have any labeling so we just name them KEY_KBD_LCD_MENU#
+ */
+#define KEY_KBD_LCD_MENU1 0x2b8
+#define KEY_KBD_LCD_MENU2 0x2b9
+#define KEY_KBD_LCD_MENU3 0x2ba
+#define KEY_KBD_LCD_MENU4 0x2bb
+#define KEY_KBD_LCD_MENU5 0x2bc
#define BTN_TRIGGER_HAPPY 0x2c0
#define BTN_TRIGGER_HAPPY1 0x2c0
#define SW_LINEIN_INSERT 0x0d /* set = inserted */
#define SW_MUTE_DEVICE 0x0e /* set = device disabled */
#define SW_PEN_INSERTED 0x0f /* set = pen inserted */
-#define SW_MAX 0x0f
+#define SW_MACHINE_COVER 0x10 /* set = cover closed */
+#define SW_MAX 0x10
#define SW_CNT (SW_MAX+1)
/*
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */
/*
* Input event codes
*
#define KEY_TITLE 0x171
#define KEY_SUBTITLE 0x172
#define KEY_ANGLE 0x173
-#define KEY_ZOOM 0x174
+#define KEY_FULL_SCREEN 0x174 /* AC View Toggle */
+#define KEY_ZOOM KEY_FULL_SCREEN
#define KEY_MODE 0x175
#define KEY_KEYBOARD 0x176
-#define KEY_SCREEN 0x177
+#define KEY_ASPECT_RATIO 0x177 /* HUTRR37: Aspect */
+#define KEY_SCREEN KEY_ASPECT_RATIO
#define KEY_PC 0x178 /* Media Select Computer */
#define KEY_TV 0x179 /* Media Select TV */
#define KEY_TV2 0x17a /* Media Select Cable */
#define KEY_SCREENSAVER 0x245 /* AL Screen Saver */
#define KEY_VOICECOMMAND 0x246 /* Listening Voice Command */
#define KEY_ASSISTANT 0x247 /* AL Context-aware desktop assistant */
+#define KEY_KBD_LAYOUT_NEXT 0x248 /* AC Next Keyboard Layout Select */
#define KEY_BRIGHTNESS_MIN 0x250 /* Set Brightness to Minimum */
#define KEY_BRIGHTNESS_MAX 0x251 /* Set Brightness to Maximum */
*/
#define KEY_DATA 0x277
#define KEY_ONSCREEN_KEYBOARD 0x278
+/* Electronic privacy screen control */
+#define KEY_PRIVACY_SCREEN_TOGGLE 0x279
+
+/* Select an area of screen to be copied */
+#define KEY_SELECTIVE_SCREENSHOT 0x27a
+
+/*
+ * Some keyboards have keys which do not have a defined meaning, these keys
+ * are intended to be programmed / bound to macros by the user. For most
+ * keyboards with these macro-keys the key-sequence to inject, or action to
+ * take, is all handled by software on the host side. So from the kernel's
+ * point of view these are just normal keys.
+ *
+ * The KEY_MACRO# codes below are intended for such keys, which may be labeled
+ * e.g. G1-G18, or S1 - S30. The KEY_MACRO# codes MUST NOT be used for keys
+ * where the marking on the key does indicate a defined meaning / purpose.
+ *
+ * The KEY_MACRO# codes MUST also NOT be used as fallback for when no existing
+ * KEY_FOO define matches the marking / purpose. In this case a new KEY_FOO
+ * define MUST be added.
+ */
+#define KEY_MACRO1 0x290
+#define KEY_MACRO2 0x291
+#define KEY_MACRO3 0x292
+#define KEY_MACRO4 0x293
+#define KEY_MACRO5 0x294
+#define KEY_MACRO6 0x295
+#define KEY_MACRO7 0x296
+#define KEY_MACRO8 0x297
+#define KEY_MACRO9 0x298
+#define KEY_MACRO10 0x299
+#define KEY_MACRO11 0x29a
+#define KEY_MACRO12 0x29b
+#define KEY_MACRO13 0x29c
+#define KEY_MACRO14 0x29d
+#define KEY_MACRO15 0x29e
+#define KEY_MACRO16 0x29f
+#define KEY_MACRO17 0x2a0
+#define KEY_MACRO18 0x2a1
+#define KEY_MACRO19 0x2a2
+#define KEY_MACRO20 0x2a3
+#define KEY_MACRO21 0x2a4
+#define KEY_MACRO22 0x2a5
+#define KEY_MACRO23 0x2a6
+#define KEY_MACRO24 0x2a7
+#define KEY_MACRO25 0x2a8
+#define KEY_MACRO26 0x2a9
+#define KEY_MACRO27 0x2aa
+#define KEY_MACRO28 0x2ab
+#define KEY_MACRO29 0x2ac
+#define KEY_MACRO30 0x2ad
+
+/*
+ * Some keyboards with the macro-keys described above have some extra keys
+ * for controlling the host-side software responsible for the macro handling:
+ * -A macro recording start/stop key. Note that not all keyboards which emit
+ * KEY_MACRO_RECORD_START will also emit KEY_MACRO_RECORD_STOP if
+ * KEY_MACRO_RECORD_STOP is not advertised, then KEY_MACRO_RECORD_START
+ * should be interpreted as a recording start/stop toggle;
+ * -Keys for switching between different macro (pre)sets, either a key for
+ * cycling through the configured presets or keys to directly select a preset.
+ */
+#define KEY_MACRO_RECORD_START 0x2b0
+#define KEY_MACRO_RECORD_STOP 0x2b1
+#define KEY_MACRO_PRESET_CYCLE 0x2b2
+#define KEY_MACRO_PRESET1 0x2b3
+#define KEY_MACRO_PRESET2 0x2b4
+#define KEY_MACRO_PRESET3 0x2b5
+
+/*
+ * Some keyboards have a buildin LCD panel where the contents are controlled
+ * by the host. Often these have a number of keys directly below the LCD
+ * intended for controlling a menu shown on the LCD. These keys often don't
+ * have any labeling so we just name them KEY_KBD_LCD_MENU#
+ */
+#define KEY_KBD_LCD_MENU1 0x2b8
+#define KEY_KBD_LCD_MENU2 0x2b9
+#define KEY_KBD_LCD_MENU3 0x2ba
+#define KEY_KBD_LCD_MENU4 0x2bb
+#define KEY_KBD_LCD_MENU5 0x2bc
#define BTN_TRIGGER_HAPPY 0x2c0
#define BTN_TRIGGER_HAPPY1 0x2c0
#define SW_LINEIN_INSERT 0x0d /* set = inserted */
#define SW_MUTE_DEVICE 0x0e /* set = device disabled */
#define SW_PEN_INSERTED 0x0f /* set = pen inserted */
-#define SW_MAX 0x0f
+#define SW_MACHINE_COVER 0x10 /* set = cover closed */
+#define SW_MAX 0x10
#define SW_CNT (SW_MAX+1)
/*
struct libinput *li;
struct libinput_device *device;
- /* SW_MAX isn't handled in libinput so the device is processed but
- * ends up without seat capabilities and is ignored. */
+ /* SW_PEN_INSERTED isn't handled in libinput so the device is
+ * processed but ends up without seat capabilities and is ignored.
+ */
uinput = litest_create_uinput_device("test device", NULL,
- EV_SW, SW_MAX,
+ EV_SW, SW_PEN_INSERTED,
-1);
li = litest_create_context();
device = libinput_path_add_device(li,
projects / platform / upstream / libinput.git / commitdiff