ARM64: dts: meson-gxl: Add support for Nexbox A95X

The Nexbox A95X exists with a Meson GXBB (S905) Soc or a Meson GXL SoC (S905X).
Add the S905X variant which uses the internal PHY instead of an external PHY.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt
index 6ef7c52..9b2b41a 100644 (file)
--- a/Documentation/devicetree/bindings/arm/amlogic.txt
+++ b/Documentation/devicetree/bindings/arm/amlogic.txt
@@ -45,4 +45,5 @@ Board compatible values:
   - "amlogic,p231" (Meson gxl s905d)
   - "amlogic,q200" (Meson gxm s912)
   - "amlogic,q201" (Meson gxm s912)
+  - "nexbox,a95x" (Meson gxbb or Meson gxl s905x)
   - "nexbox,a1" (Meson gxm s912)

diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index 2fbb8e3..0d7bfbf 100644 (file)
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-telos.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-nexbox-a95x.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-q200.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-q201.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-nexbox-a1.dtb

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts
new file mode 100644 (file)
index 0000000..e99101a
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts
@@ -0,0 +1,205 @@
+/*
+ * Copyright (c) 2016 Andreas Färber
+ * Copyright (c) 2016 BayLibre, Inc.
+ * Author: Neil Armstrong <narmstrong@kernel.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "meson-gxl-s905x.dtsi"
+
+/ {
+       compatible = "nexbox,a95x", "amlogic,s905x", "amlogic,meson-gxl";
+       model = "NEXBOX A95X (S905X)";
+
+       aliases {
+               serial0 = &uart_AO;
+       };
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+       };
+
+       memory@0 {
+               device_type = "memory";
+               reg = <0x0 0x0 0x0 0x80000000>;
+       };
+
+       vddio_card: gpio-regulator {
+               compatible = "regulator-gpio";
+
+               regulator-name = "VDDIO_CARD";
+               regulator-min-microvolt = <1800000>;
+               regulator-max-microvolt = <3300000>;
+
+               gpios = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
+               gpios-states = <1>;
+
+               /* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */
+               states = <1800000 0
+                         3300000 1>;
+       };
+
+       vddio_boot: regulator-vddio_boot {
+               compatible = "regulator-fixed";
+               regulator-name = "VDDIO_BOOT";
+               regulator-min-microvolt = <1800000>;
+               regulator-max-microvolt = <1800000>;
+       };
+
+       vddao_3v3: regulator-vddao_3v3 {
+               compatible = "regulator-fixed";
+               regulator-name = "VDDAO_3V3";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+       };
+
+       vcc_3v3: regulator-vcc_3v3 {
+               compatible = "regulator-fixed";
+               regulator-name = "VCC_3V3";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+       };
+
+       emmc_pwrseq: emmc-pwrseq {
+               compatible = "mmc-pwrseq-emmc";
+               reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+       };
+
+       wifi32k: wifi32k {
+               compatible = "pwm-clock";
+               #clock-cells = <0>;
+               clock-frequency = <32768>;
+               pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+       };
+
+       sdio_pwrseq: sdio-pwrseq {
+               compatible = "mmc-pwrseq-simple";
+               reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+               clocks = <&wifi32k>;
+               clock-names = "ext_clock";
+       };
+};
+
+&uart_AO {
+       status = "okay";
+       pinctrl-0 = <&uart_ao_a_pins>;
+       pinctrl-names = "default";
+};
+
+&ethmac {
+       status = "okay";
+       phy-mode = "rmii";
+       phy-handle = <&internal_phy>;
+};
+
+&ir {
+       status = "okay";
+       pinctrl-0 = <&remote_input_ao_pins>;
+       pinctrl-names = "default";
+};
+
+/* Wireless SDIO Module */
+&sd_emmc_a {
+       status = "okay";
+       pinctrl-0 = <&sdio_pins>;
+       pinctrl-names = "default";
+       #address-cells = <1>;
+       #size-cells = <0>;
+
+       bus-width = <4>;
+       cap-sd-highspeed;
+       max-frequency = <100000000>;
+
+       non-removable;
+       disable-wp;
+
+       mmc-pwrseq = <&sdio_pwrseq>;
+
+       vmmc-supply = <&vddao_3v3>;
+       vqmmc-supply = <&vddio_boot>;
+};
+
+/* SD card */
+&sd_emmc_b {
+       status = "okay";
+       pinctrl-0 = <&sdcard_pins>;
+       pinctrl-names = "default";
+
+       bus-width = <4>;
+       cap-sd-highspeed;
+       max-frequency = <100000000>;
+       disable-wp;
+
+       cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
+       cd-inverted;
+
+       vmmc-supply = <&vddao_3v3>;
+       vqmmc-supply = <&vddio_card>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+       status = "okay";
+       pinctrl-0 = <&emmc_pins>;
+       pinctrl-names = "default";
+
+       bus-width = <8>;
+       cap-sd-highspeed;
+       cap-mmc-highspeed;
+       max-frequency = <200000000>;
+       non-removable;
+       disable-wp;
+       mmc-ddr-1_8v;
+       mmc-hs200-1_8v;
+
+       mmc-pwrseq = <&emmc_pwrseq>;
+       vmmc-supply = <&vcc_3v3>;
+       vqmmc-supply = <&vddio_boot>;
+};
+
+&pwm_ef {
+       status = "okay";
+       pinctrl-0 = <&pwm_e_pins>;
+       pinctrl-names = "default";
+       clocks = <&clkc CLKID_FCLK_DIV4>;
+       clock-names = "clkin0";
+};